ADF4360-0BCPZRL - 2.6 GHz Integer-N PLL with VCO | Analog Devices
MPN: ADF4360-0BCPZRL ✓ פעילADF4360-0BCPZRL סקירה
An integer-N PLL synthesizer generates a stable output frequency by comparing a divided reference signal with a feedback signal from an internal VCO. The VCO converts this phase error into a control voltage that adjusts the oscillator to lock the feedback divider at the requested ratio. When the divide-by-2 output is selected, the same synthesizer can support lower-frequency RF outputs without changing the external package or control architecture.
The principal features of this device include its integrated synthesizer and VCO, 2600 MHz center-frequency design, selectable divide-by-2 RF output, three-wire serial programming, and a compact exposed-pad package. These characteristics simplify RF clock and local-oscillator designs by combining the frequency-generating functions in one component rather than requiring a separate integer-N PLL and VCO.
The ADF4360 belongs to the PLL and frequency-synthesizer hierarchy, which also includes clock generators, RF synthesizers, local oscillators, and phase-locked loops. Integer-N synthesizers are especially useful when relatively simple integer feedback ratios and direct digital programming are preferred. The architecture is suitable for wireless infrastructure, test equipment, microwave conversion stages, and other systems requiring programmable RF sources.
Choose the -0 variant only when its specified frequency band covers the intended output. Other ADF4360 band options share the 24-lead LFCSP footprint and serial interface, but their VCO ranges differ and can require different prescaler, divisor, or band-plan settings. Confirm the required register settings and loop-filter values against the manufacturer datasheet before converting an existing design.
Keep the RF output path short and use controlled-impedance routing on the PCB. The exposed pad must be connected to the ground plane with adequate thermal-via density, because power loss in the VCO and output stages can raise junction temperature. Place the loop-filter components close to their associated pins and follow the reference-design layout to minimize phase noise degradation and unwanted coupling.
This product page consolidates the key electrical characteristics, band-family alternatives, package information, and practical RF layout guidance into one engineering reference. Use the manufacturer datasheet for the complete register map, electrical characteristic tables, and recommended application circuits.
חלופות תחליף ישיר עבור ADF4360-0BCPZRL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADF4360-0BCPZRL (אותו גורם צורה וטביעת רגל) — שונים ב Package, Divide-by-2 Output Range, Product Type, Synthesizer Architecture, VCO Center Frequency.
ADF4360-0BCPZRL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-1BCPZRL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-4BCPZRL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-7BCPZRL
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADF4360-4BCPZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-0BCPZRL מפרטים
| Product Type | Integer-N frequency synthesizer with integrated VCO |
| VCO Center Frequency | 2600 MHz |
| Maximum Listed RF Output | 2725 MHz |
| Divide-by-2 RF Output Range | 1200 MHz to 1360 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| RF Output Divide-by-2 Option | Yes |
| Serial Control Interface | 3-wire serial interface |
| Synthesizer Architecture | Integer-N PLL |
| מארז | 24-lead LFCSP with exposed pad |
| Package Type | 24-pin WFQFN exposed-pad CSP |
| סוג הרכבה | Surface mount |
| Shipping Format | Tape and reel |
מדריך תצורת פינים של ADF4360-0BCPZRL 24-pin wfqfn exposed-pad csp
תצורת פינים עבור ADF4360-0BCPZRL (מארזת 24-pin wfqfn exposed-pad csp). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADF4360-0BCPZRL.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADF4360-0BCPZRL מתאים עבור 6 יישוםs: RF Local Oscillator Generation, Wireless Infrastructure Frequency Synthesis, Microwave Test and Measurement, Frequency Conversion and Upconversion, Clock and LO Distribution Systems, Industrial RF Sensor Interfaces.
RF Local Oscillator Generation
The ADF4360-0BCPZRL is a strong fit for a programmable RF local oscillator because it combines an integer-N PLL, a 2600 MHz-centered VCO, and a three-wire control interface in one 24-lead exposed-pad package. The divide-by-2 path can provide an RF output from 1200 MHz to 1360 MHz, which is useful in the lower microwave band. Integrating the synthesizer and VCO reduces the number of discrete frequency-generation blocks while preserving digital control. RF output routing should use controlled impedance, short traces, and isolation from the reference network to preserve phase-noise performance.
מומלץ
Wireless Infrastructure Frequency Synthesis
The ADF4360-0BCPZRL can provide the programmable RF source required by microwave upconversion and backhaul equipment operating near the 2.6 GHz region. Its integer-N feedback architecture allows the output frequency to be set digitally through the serial interface, and the listed 2725 MHz upper output provides coverage around the nominal center frequency. The exposed thermal pad must be tied to a solid ground structure with multiple vias. Designers should also use the manufacturer reference layout for loop-filter placement and reference decoupling to limit phase noise and spurious conversion products.
מומלץ
Microwave Test and Measurement
A programmable RF source is central to many signal-chain and microwave test systems, and the ADF4360-0BCPZRL combines frequency synthesis with an integrated VCO for compact instrument designs. The 10 MHz to 250 MHz reference-input range allows the reference system to be selected according to the instrument's master oscillator and phase-noise requirements. The divide-by-2 output covering 1200 MHz to 1360 MHz can support lower-band test points. Keep output power, spur levels, and lock performance within the instrument specification by following the manufacturer's register and filter-component recommendations.
מומלץ
Frequency Conversion and Upconversion
The ADF4360-0BCPZRL is suitable as the local oscillator in a double-conversion or direct-conversion RF mixer. Its nominal 2600 MHz VCO center frequency is close to many microwave downconversion and upconversion plans, while the divide-by-2 option supports a 1200 MHz to 1360 MHz local-oscillator range. The serial control interface makes frequency changes straightforward in automated equipment. Isolation between the synthesizer output and mixer input is important because reference and VCO harmonics can produce unwanted mixing products. Use short RF traces, proper impedance control, and the recommended ground-via pattern around the exposed pad.
מומלץ
Clock and LO Distribution Systems
In a laboratory clock-distribution system, the ADF4360-0BCPZRL can act as the central programmable synthesizer feeding RF distribution stages. A reference within the 10 MHz to 250 MHz range establishes the PLL reference, while digital programming selects the required output settings. The integrated VCO reduces the need for a separate oscillator assembly and frees board area in multi-channel systems. However, adjacent channels require careful RF partitioning because reference harmonics and VCO leakage can raise the noise floor. Validate channel-to-channel isolation and use the manufacturer's layout example as the baseline for component placement.
מומלץ
Industrial RF Sensor Interfaces
The ADF4360-0BCPZRL can support industrial RF sensors and radar front ends that require a stable, digitally controlled local-oscillator signal. Its integer-N architecture provides repeatable frequency selection without a separate tuning mechanism, and the 24-lead exposed-pad package supports compact RF modules. The divide-by-2 output can serve lower-frequency mixer plans where the required local-oscillator range is 1200 MHz to 1360 MHz. Because industrial systems may place the synthesizer near high-power transmit circuitry, thermal grounding and RF isolation are essential. Verify ambient range and conducted emissions against the finished equipment specification.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADF4360-0BCPZRL — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADF4360-0BCPZRL7 | ADF4360-1BCPZRL7 | ADF4360-4BCPZRL7 | ADF4360-7BCPZRL | ADF4360-4BCPZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad |
| Device Type | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Nominal Center Frequency | 2600 MHz | 2600 MHz | 2500 MHz to 3000 MHz family band | 1750 MHz | 1800 MHz class | 1750 MHz |
| Reference Input Range | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz |
| Control Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
מבדילים עיקריים
- Closest same-band ordering alternative (לעומתADF4360-0BCPZRL7)
- Higher center frequency than the -4 band option (לעומתADF4360-4BCPZRL7)
- Broader upper RF coverage than the -7 option (לעומתADF4360-7BCPZRL)
הערות תכנון
Connect the 24-lead LFCSP exposed pad to a low-impedance ground plane and add a dense array of thermal vias beneath the pad. The exposed pad is the primary path for removing heat from the integrated VCO and synthesizer electronics. Keep the via field inside the package land-pattern limits so it does not interfere with adjacent routing. A continuous ground reference beneath the RF and reference sections will also improve return-path continuity.
Route the reference and RF outputs as controlled-impedance lines, keep them physically short, and avoid running the sensitive reference trace parallel to the high-power RF output. Place bypass and loop-filter components close to their pins and terminate unused outputs as directed in the manufacturer application circuit. These practices reduce reference leakage, VCO harmonic coupling, and phase-noise degradation, particularly important when the output feeds a sensitive mixer or measurement chain.
Do not select an ADF4360 band variant solely by package fit. The -0, -1, -4, and -7 options share the footprint and serial interface but cover different VCO ranges, so feedback divisors, prescaler settings, and register values can differ. Before substitution, confirm the desired output against the alternate part's VCO range, recalculate the loop filter if required, and verify that the thermal and reference conditions remain unchanged.
מידע על תאימות
No explicit environmental or automotive compliance declarations were listed for this part. Review the manufacturer product page and current material-declaration documents before production release.