ADF4360-0BCPZRL - 2.6 GHz Integer-N PLL with VCO | Analog Devices
料号: ADF4360-0BCPZRL ✓ 量产中ADF4360-0BCPZRL 概述
An integer-N PLL synthesizer generates a stable output frequency by comparing a divided reference signal with a feedback signal from an internal VCO. The VCO converts this phase error into a control voltage that adjusts the oscillator to lock the feedback divider at the requested ratio. When the divide-by-2 output is selected, the same synthesizer can support lower-frequency RF outputs without changing the external package or control architecture.
The principal features of this device include its integrated synthesizer and VCO, 2600 MHz center-frequency design, selectable divide-by-2 RF output, three-wire serial programming, and a compact exposed-pad package. These characteristics simplify RF clock and local-oscillator designs by combining the frequency-generating functions in one component rather than requiring a separate integer-N PLL and VCO.
The ADF4360 belongs to the PLL and frequency-synthesizer hierarchy, which also includes clock generators, RF synthesizers, local oscillators, and phase-locked loops. Integer-N synthesizers are especially useful when relatively simple integer feedback ratios and direct digital programming are preferred. The architecture is suitable for wireless infrastructure, test equipment, microwave conversion stages, and other systems requiring programmable RF sources.
Choose the -0 variant only when its specified frequency band covers the intended output. Other ADF4360 band options share the 24-lead LFCSP footprint and serial interface, but their VCO ranges differ and can require different prescaler, divisor, or band-plan settings. Confirm the required register settings and loop-filter values against the manufacturer datasheet before converting an existing design.
Keep the RF output path short and use controlled-impedance routing on the PCB. The exposed pad must be connected to the ground plane with adequate thermal-via density, because power loss in the VCO and output stages can raise junction temperature. Place the loop-filter components close to their associated pins and follow the reference-design layout to minimize phase noise degradation and unwanted coupling.
This product page consolidates the key electrical characteristics, band-family alternatives, package information, and practical RF layout guidance into one engineering reference. Use the manufacturer datasheet for the complete register map, electrical characteristic tables, and recommended application circuits.
直接替换替代料: ADF4360-0BCPZRL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADF4360-0BCPZRL (相同外形与封装尺寸) ——差异在于 Package, Divide-by-2 Output Range, Product Type, Synthesizer Architecture, VCO Center Frequency.
ADF4360-0BCPZRL7
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-1BCPZRL7
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-4BCPZRL7
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-7BCPZRL
✅ 直接替换联系询价
查看数据手册 →ADF4360-4BCPZ
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-0BCPZRL 规格参数
| Product Type | Integer-N frequency synthesizer with integrated VCO |
| VCO Center Frequency | 2600 MHz |
| Maximum Listed RF Output | 2725 MHz |
| Divide-by-2 RF Output Range | 1200 MHz to 1360 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| RF Output Divide-by-2 Option | Yes |
| Serial Control Interface | 3-wire serial interface |
| Synthesizer Architecture | Integer-N PLL |
| 封装 | 24-lead LFCSP with exposed pad |
| Package Type | 24-pin WFQFN exposed-pad CSP |
| 安装类型 | Surface mount |
| Shipping Format | Tape and reel |
ADF4360-0BCPZRL 24-pin wfqfn exposed-pad csp 引脚配置指南
ADF4360-0BCPZRL(24-pin wfqfn exposed-pad csp 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADF4360-0BCPZRL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADF4360-0BCPZRL 适用于 6 应用s: RF Local Oscillator Generation, Wireless Infrastructure Frequency Synthesis, Microwave Test and Measurement, Frequency Conversion and Upconversion, Clock and LO Distribution Systems, Industrial RF Sensor Interfaces.
RF Local Oscillator Generation
The ADF4360-0BCPZRL is a strong fit for a programmable RF local oscillator because it combines an integer-N PLL, a 2600 MHz-centered VCO, and a three-wire control interface in one 24-lead exposed-pad package. The divide-by-2 path can provide an RF output from 1200 MHz to 1360 MHz, which is useful in the lower microwave band. Integrating the synthesizer and VCO reduces the number of discrete frequency-generation blocks while preserving digital control. RF output routing should use controlled impedance, short traces, and isolation from the reference network to preserve phase-noise performance.
推荐
Wireless Infrastructure Frequency Synthesis
The ADF4360-0BCPZRL can provide the programmable RF source required by microwave upconversion and backhaul equipment operating near the 2.6 GHz region. Its integer-N feedback architecture allows the output frequency to be set digitally through the serial interface, and the listed 2725 MHz upper output provides coverage around the nominal center frequency. The exposed thermal pad must be tied to a solid ground structure with multiple vias. Designers should also use the manufacturer reference layout for loop-filter placement and reference decoupling to limit phase noise and spurious conversion products.
推荐
Microwave Test and Measurement
A programmable RF source is central to many signal-chain and microwave test systems, and the ADF4360-0BCPZRL combines frequency synthesis with an integrated VCO for compact instrument designs. The 10 MHz to 250 MHz reference-input range allows the reference system to be selected according to the instrument's master oscillator and phase-noise requirements. The divide-by-2 output covering 1200 MHz to 1360 MHz can support lower-band test points. Keep output power, spur levels, and lock performance within the instrument specification by following the manufacturer's register and filter-component recommendations.
推荐
Frequency Conversion and Upconversion
The ADF4360-0BCPZRL is suitable as the local oscillator in a double-conversion or direct-conversion RF mixer. Its nominal 2600 MHz VCO center frequency is close to many microwave downconversion and upconversion plans, while the divide-by-2 option supports a 1200 MHz to 1360 MHz local-oscillator range. The serial control interface makes frequency changes straightforward in automated equipment. Isolation between the synthesizer output and mixer input is important because reference and VCO harmonics can produce unwanted mixing products. Use short RF traces, proper impedance control, and the recommended ground-via pattern around the exposed pad.
推荐
Clock and LO Distribution Systems
In a laboratory clock-distribution system, the ADF4360-0BCPZRL can act as the central programmable synthesizer feeding RF distribution stages. A reference within the 10 MHz to 250 MHz range establishes the PLL reference, while digital programming selects the required output settings. The integrated VCO reduces the need for a separate oscillator assembly and frees board area in multi-channel systems. However, adjacent channels require careful RF partitioning because reference harmonics and VCO leakage can raise the noise floor. Validate channel-to-channel isolation and use the manufacturer's layout example as the baseline for component placement.
推荐
Industrial RF Sensor Interfaces
The ADF4360-0BCPZRL can support industrial RF sensors and radar front ends that require a stable, digitally controlled local-oscillator signal. Its integer-N architecture provides repeatable frequency selection without a separate tuning mechanism, and the 24-lead exposed-pad package supports compact RF modules. The divide-by-2 output can serve lower-frequency mixer plans where the required local-oscillator range is 1200 MHz to 1360 MHz. Because industrial systems may place the synthesizer near high-power transmit circuitry, thermal grounding and RF isolation are essential. Verify ambient range and conducted emissions against the finished equipment specification.
推荐
推荐产品汇总
工程参考数据: ADF4360-0BCPZRL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADF4360-0BCPZRL7 | ADF4360-1BCPZRL7 | ADF4360-4BCPZRL7 | ADF4360-7BCPZRL | ADF4360-4BCPZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad | 24-lead LFCSP with exposed pad |
| Device Type | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Nominal Center Frequency | 2600 MHz | 2600 MHz | 2500 MHz to 3000 MHz family band | 1750 MHz | 1800 MHz class | 1750 MHz |
| Reference Input Range | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz |
| Control Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
关键差异点
- Closest same-band ordering alternative (对比 ADF4360-0BCPZRL7)
- Higher center frequency than the -4 band option (对比 ADF4360-4BCPZRL7)
- Broader upper RF coverage than the -7 option (对比 ADF4360-7BCPZRL)
设计说明
Connect the 24-lead LFCSP exposed pad to a low-impedance ground plane and add a dense array of thermal vias beneath the pad. The exposed pad is the primary path for removing heat from the integrated VCO and synthesizer electronics. Keep the via field inside the package land-pattern limits so it does not interfere with adjacent routing. A continuous ground reference beneath the RF and reference sections will also improve return-path continuity.
Route the reference and RF outputs as controlled-impedance lines, keep them physically short, and avoid running the sensitive reference trace parallel to the high-power RF output. Place bypass and loop-filter components close to their pins and terminate unused outputs as directed in the manufacturer application circuit. These practices reduce reference leakage, VCO harmonic coupling, and phase-noise degradation, particularly important when the output feeds a sensitive mixer or measurement chain.
Do not select an ADF4360 band variant solely by package fit. The -0, -1, -4, and -7 options share the footprint and serial interface but cover different VCO ranges, so feedback divisors, prescaler settings, and register values can differ. Before substitution, confirm the desired output against the alternate part's VCO range, recalculate the loop filter if required, and verify that the thermal and reference conditions remain unchanged.
合规信息
No explicit environmental or automotive compliance declarations were listed for this part. Review the manufacturer product page and current material-declaration documents before production release.