Analog Devices

ADM237LAN - 5V 5/3 RS-232 Transceiver | Analog Devices

MPN: ADM237LAN ✓ פעיל
5 V Vdss 24-PDIP Package
כמות הזמנה מינימלית: 1 |

ADM237LAN סקירה

The Analog Devices ADM237LAN is a 5 V powered CMOS RS-232 transceiver with five drivers and three receivers, housed in a 24-pin plastic dual-inline package. It supports data rates up to 120 kB/s, meets EIA-232-E and V.28 interface requirements, provides 9 V output swing from a 5 V supply, and includes onboard DC-DC converters for single-supply operation.

An RS-232 transceiver is a semiconductor interface device that combines line drivers and receivers for point-to-point serial data links. The transmitter converts logic-level signals into RS-232 voltage levels, while the receiver converts bipolar RS-232 signals back into logic-level voltages. The ADM237LAN belongs to the interface IC hierarchy as a communication transceiver and provides the electrical conversion required between CMOS systems and the EIA-232-E signal interface.

The five-driver and three-receiver arrangement supports equipment with more transmit channels than receive channels. Onboard DC-DC converters allow the driver outputs to achieve a 9 V swing from one 5 V supply, reducing the external power-supply count in compact serial interfaces. The device also includes low-power shutdown, receiver activity during shutdown, and small 1 F capacitors as highlighted in the indexed datasheet information.

RS-232 receivers in the ADM237LAN support input voltages up to 30 V. This tolerance helps protect receiver inputs when connected to an RS-232 port that may experience transients or voltage offsets. The CMOS implementation operates from a single 5 V supply and is intended for EIA-232-E and V.28 communications interfaces, including applications where a separate 12 V rail is unavailable.

Typical uses include industrial control consoles, data acquisition equipment, test instruments, service interfaces, and embedded serial ports. Designers can use the ADM237LAN to bridge a 5 V controller to an RS-232 host while retaining a 120 kB/s communication rate. In multi-port systems, the asymmetric channel count should be matched to the actual cable directions and loading requirements of each port.

The primary design consideration is ensuring that every driver and receiver has a defined signal path. Place the specified charge-pump capacitors close to their associated pins, route the interface connector and cable return path to minimize noise pickup, and use the receiver tolerance rating only as protection margin rather than as a substitute for correct RS-232 voltage levels.

This page organizes the ADM237LAN's core interface, electrical, package, and lifecycle information with practical application guidance, shutdown considerations, and a validation-conscious replacement workflow. It also distinguishes confirmed product characteristics from parameters that require confirmation before a new PCB layout or production release.

חלופות תחליף ישיר עבור ADM237LAN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADM237LANZ

✅ Drop-In
📦 24-pin PDIP
Same ADM237LAN family and 5/3-channel RS-232 function; ordering-suffix qualification details require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

ADM237LAN מפרטים

Product Type 5/3 RS-232 transceiver
מתח אספקה 5 V
Technology CMOS
Maximum Data Rate 120 kB/s
Interface Compliance EIA-232-E and V.28
Driver Count 5
Receiver Count 3
DC-DC Converter Onboard
Driver Output Swing 9 V from a 5 V supply
Charge-Pump Capacitor Value 1 F
Shutdown Function Low-power shutdown
Receiver State During Shutdown Active
Maximum Receiver Input Voltage 30 V
מארז 24-PDIP
מספר פינים 24 pins
סוג הרכבה Through-hole

מדריך תצורת פינים של ADM237LAN 24-pdip

תצורת פינים עבור ADM237LAN (מארזת 24-pdip). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 24-pdip עבור ADM237LAN

אין נתוני פריסת פינים מפורטים עבור ADM237LAN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADM237LAN מתאים עבור 6 יישוםs: Industrial Control Console Interfaces, Data Acquisition Equipment, Test and Measurement Instruments, Embedded Serial Port Expansion, Service and Configuration Ports, Communications Adapter Equipment.

🏭

Industrial Control Console Interfaces

The ADM237LAN fits industrial control-console designs that must translate between 5 V CMOS logic and an RS-232 service or operator port. Its five drivers and three receivers provide flexibility for several data paths, while the 120 kB/s rate is suitable for command traffic, configuration transfers, and diagnostic protocols. The onboard DC-DC converters and 9 V driver swing eliminate the need for a separate 12 V supply rail. Designers should reserve one receiver for the primary command link and avoid assigning unused channels without checking the datasheet pin table.

📟

Data Acquisition Equipment

ADM237LAN is appropriate for laboratory and industrial data-acquisition equipment that exchanges commands or sampled data with a host computer through RS-232. A 120 kB/s interface can support moderate-rate control traffic, while the five-driver and three-receiver configuration supports multi-channel equipment architectures. The single 5 V supply simplifies embedded instrumentation, and receiver inputs up to 30 V add tolerance to connected ports. For long cables or electrically noisy environments, retain the RS-232 return path and validate the complete cable and grounding arrangement.

🖥️

Test and Measurement Instruments

The ADM237LAN can serve as the RS-232 communications interface in bench instruments, programmable sources, and automated test systems. Its 5 V CMOS operation fits controller-heavy designs that do not expose a separate high-voltage supply, while the 120 kB/s limit is appropriate for remote commands and moderate test-result transfers. Five driver channels can support several peripheral connections, although each cable requires careful reference-ground routing. Validate command latency and sustained data throughput before choosing the interface rate for automated production systems.

🔧

Embedded Serial Port Expansion

ADM237LAN is useful when an embedded controller needs multiple RS-232-compatible channels but only supports a 5 V supply. The device combines five transmitters and three receivers in one 24-PDIP package, reducing the number of separate interface packages required when direction counts differ across ports. Onboard DC-DC conversion produces a 9 V driver swing from the 5 V rail. Confirm the host's RS-232 logic levels and handshake requirements, and use only the receive channels needed for each cable connection.

🔌

Service and Configuration Ports

The ADM237LAN fits service-oriented equipment that needs a legacy-compatible RS-232 maintenance connection alongside 5 V digital control logic. The EIA-232-E and V.28 interface objectives, 120 kB/s data rate, and three receivers allow a system to combine configuration, logging, and status connections when cable topology permits. Low-power shutdown can reduce activity when the service interface is not required. Confirm the meaning of receiver operation during shutdown and implement the manufacturer-specified capacitor network before finalizing the layout.

🌐

Communications Adapter Equipment

ADM237LAN can be used in protocol adapters, equipment gateways, and legacy peripheral controllers that translate between CMOS logic and RS-232. The 5/3 channel arrangement supports equipment with several outgoing data streams and fewer incoming signals, while the 120 kB/s capability suits short control and configuration links. Its 24-PDIP through-hole package is straightforward for prototyping and leaded assembly. Engineers should verify connector protection, ground continuity, and cable length because RS-232 communication reliability depends on the complete physical interface, not only the transceiver.

What are the key specifications of ADM237LAN that engineers should know?
The ADM237LAN is a 5 V powered CMOS RS-232 transceiver with five drivers, three receivers, a 120 kB/s maximum data rate, onboard DC-DC converters, and a 24-PDIP package. According to the Analog Devices datasheet indexed by AllDataSheet, it is intended for EIA-232-E and V.28 communications interfaces. Its drivers provide 9 V output swing from the single 5 V supply, while the receivers accept inputs up to 30 V.
What is the operating voltage of ADM237LAN?
The ADM237LAN operates from a single 5 V supply. According to the Analog Devices datasheet information, onboard DC-DC converters provide the RS-232 driver output swing, allowing the interface to reach 9 V without a separate 12 V rail. This makes the device suitable for systems that cannot conveniently provide the higher voltage traditionally associated with an RS-232 interface.
What is the maximum data rate of ADM237LAN?
The ADM237LAN supports a maximum data rate of 120 kB/s. According to the indexed Analog Devices datasheet description, the device combines five CMOS line drivers with three line receivers for EIA-232-E and V.28 interfaces. Actual sustained throughput also depends on cable characteristics, receiver thresholds, data framing, and the performance of the connected host or peripheral.
Where can I download the ADM237LAN datasheet PDF?
The ADM237LAN datasheet can be obtained from the Analog Devices documentation indexed through AllDataSheet or from the PDF mirror listed on this page. The manufacturer document describes the 5 V powered CMOS architecture, five drivers, three receivers, 120 kB/s data rate, onboard converters, shutdown behavior, and EIA-232-E and V.28 applications. Use the Analog Devices document for final schematic and production decisions.
Where is the ADM237LAN pinout located?
The ADM237LAN pinout is located in the pin-description table of the manufacturer datasheet, including the 24-PDIP numbering and capacitor connections. The indexed device information identifies a 24-pin plastic dual-inline package but does not reproduce every terminal name. Assign PCB tracks from the datasheet pin table and verify the package drawing before releasing artwork.
Where can I buy ADM237LAN online?
Use the Request a Quote form on this page to request ADM237LAN availability, lot information, and current commercial terms. The listing identifies ADM237LAN as a 5/3 RS-232 transceiver in a 24-PDIP package, but the indexed results do not provide a complete quantity-break table for this exact MPN. A formal quote is therefore the appropriate route for current supply and delivery information.
What is the price of ADM237LAN?
Current ADM237LAN pricing is obtained through the Request a Quote form on this page. The product is a 5 V, five-driver and three-receiver RS-232 transceiver in a 24-PDIP package, but the indexed listings do not present a qualifying quantity-break price table for the exact MPN. The quote workflow provides current pricing for the requested quantity and purchasing conditions.
What is the lead time for ADM237LAN?
Request the current ADM237LAN lead time through the Request a Quote form on this page. Lead time depends on factory inventory, production status, order quantity, and the requested shipment terms. The product listing identifies a 24-PDIP RS-232 transceiver, but it does not establish a universal delivery interval that can be applied reliably to every order.
Is ADM237LAN in stock?
Stock availability for ADM237LAN should be confirmed through the Request a Quote form on this page for the exact quantity and purchasing conditions. The indexed product results identify the part as a 5 V, 5/3 RS-232 transceiver in a 24-PDIP package, but they do not provide a dependable stock count or contracted allocation. A current quote confirms the available quantity and delivery schedule.
What is the difference between ADM237LAN and ADM232LAN?
The ADM237LAN is a five-driver and three-receiver, 120 kB/s RS-232 transceiver with onboard DC-DC converters and a 24-PDIP package. ADM232LAN belongs to the same Analog Devices ADM2xx interface family, but its detailed channel configuration and electrical ratings must be checked independently. According to the Analog Devices family documentation, both target EIA-232-E and V.28 communications interfaces.
When should I choose ADM237LAN over ADM232LAN?
Choose ADM237LAN when the design specifically needs five RS-232 drivers, three receivers, a 120 kB/s interface, onboard DC-DC conversion, and a 5 V-only supply arrangement. Choose ADM232LAN only after confirming its pinout, package, channel count, and electrical ratings satisfy the board revision. According to the ADM2xx family documentation, both families support EIA-232-E and V.28 interfaces.
Is ADM237LAN suitable for industrial control and data acquisition equipment?
The ADM237LAN is suitable for industrial control and data-acquisition links that require a compliant RS-232 interface and can operate from 5 V. According to the manufacturer description, it supports EIA-232-E and V.28 at up to 120 kB/s, with receivers tolerant of inputs up to 30 V. Environmental suitability, operating temperature, and EMC performance still require board-level qualification.
What is the best drop-in replacement for ADM237LAN?
No drop-in replacement for ADM237LAN has been validated for unrestricted use in this product record. A valid replacement must match the 24-PDIP footprint, pin functions, 5 V supply architecture, five-driver and three-receiver arrangement, shutdown behavior, and EIA-232-E and V.28 performance. Submit the required channel counts and operating conditions through the Request a Quote form before approving a substitute.
What can replace ADM237LAN?
The strongest replacement candidate is the one that preserves the ADM237LAN's 24-PDIP footprint, pin functions, 5 V supply, five drivers, three receivers, shutdown operation, and 120 kB/s interface target. The indexed cross-reference results do not establish a specific cross-brand part that satisfies every condition. Treat any candidate as unapproved until its datasheet and board-level requirements are reviewed.
What is the best cross-brand equivalent for ADM237LAN?
No cross-brand equivalent can be recommended as a confirmed ADM237LAN drop-in from the indexed technical information. A valid equivalent must maintain the same 24-PDIP pin arrangement and match the 5 V supply, 5/3 channel arrangement, 120 kB/s data-rate target, EIA-232-E compliance, V.28 behavior, and shutdown characteristics. Request a quote for a documented substitution review rather than relying on package similarity alone.

נתוני עזר הנדסיים עבור ADM237LAN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADM237LAN when a design requires a 5 V-only RS-232 interface with five driver channels, three receiver channels, a data rate up to 120 kB/s, and onboard DC-DC conversion. It is particularly useful for asymmetric legacy communication ports and service interfaces where allocating a separate 12 V rail would be inconvenient. The 24-PDIP package favors leaded assembly and prototypes rather than highly compact surface-mount designs. Before selecting a substitute, verify the complete 24-pin pinout, capacitor connections, shutdown behavior, channel direction, 5 V supply operation, and EIA-232-E and V.28 performance. No cross-brand drop-in part has been confirmed by the indexed technical information, so a replacement should be treated as unapproved until its manufacturer documentation demonstrates equivalent pin and electrical behavior.

השוואה עם חלופות

פרמטר מוצר זה
Brand Analog Devices
Package 24-PDIP
Product Type 5/3 RS-232 transceiver
Supply Voltage 5 V
Maximum Data Rate 120 kB/s
Driver Count 5
Receiver Count 3
Driver Output Swing 9 V from a 5 V supply
Receiver Input Tolerance 30 V
Onboard DC-DC Converters Yes
Interface Standards EIA-232-E and V.28
Shutdown Behavior Low-power shutdown with receivers active

מבדילים עיקריים

  • Five transmitters and three receivers in one interface device (לעומתA conventional four-driver and four-receiver RS-232 transceiver)
  • Single 5 V supply with onboard DC-DC conversion (לעומתA conventional RS-232 interface requiring a separate 12 V rail)
  • High receiver-input voltage tolerance (לעומתA lower-tolerance RS-232 receiver implementation)

הערות תכנון

Place the capacitors associated with the onboard DC-DC converters directly beside their designated pins and keep the high-current charge-pump loops compact. Follow the manufacturer layout artwork for component orientation and return-current paths. The through-hole 24-PDIP format provides convenient prototype assembly, but capacitor placement still determines whether switching transients couple into sensitive analog or logic circuitry on the same board.

Keep each RS-232 driver output away from receiver inputs and unrelated clocks unless the interface architecture requires them to cross. Maintain a continuous signal-ground path between connected equipment, and route the cable return adjacent to the signal conductors where practical. Although the receivers accept voltages up to 30 V, that rating provides input tolerance and does not guarantee reliable communication with incorrect voltage levels or excessive cable noise.

Do not treat the 30 V receiver input rating as the expected RS-232 signal level or as permission to exceed the device's absolute maximum ratings. Verify the 24-pin pinout, supply sequencing, charge-pump capacitor values, and shutdown state before fabrication. Also confirm that the five transmitter channels and three receiver channels are assigned to the intended connector directions; package similarity alone cannot establish interchangeability with another transceiver.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The indexed ADM237LAN documentation identifies EIA-232-E and V.28 interface compliance but does not establish RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose interface transceiver.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADM237LAN datasheet ADM237LAN specifications ADM237LAN pinout ADM237LAN datasheet pdf ADM237LAN equivalent ADM237LAN replacement ADM237LAN cross reference ADM237LAN 24-PDIP footprint ADM237LAN 120 kB/s RS-232 ADM237LAN 5V RS-232 transceiver Analog Devices ADM237LAN ADM237LAN price ADM237LAN stock ADM237LAN application circuit ADM237LAN vs ADM232LAN

רכיבים ומונחים קשורים

Analog Devices ADM237LAN ADM232LAN RS-232 transceiver line driver line receiver interface IC communication transceiver semiconductor EIA-232-E V.28 CMOS single 5 V supply onboard DC-DC converter 120 kB/s data rate 9 V output swing 30 V receiver input five drivers three receivers 24-PDIP dual-inline package low-power shutdown industrial control data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר