ADM237LAN - 5V 5/3 RS-232 Transceiver | Analog Devices
MPN: ADM237LAN ✓ ActiveADM237LAN Overview
An RS-232 transceiver is a semiconductor interface device that combines line drivers and receivers for point-to-point serial data links. The transmitter converts logic-level signals into RS-232 voltage levels, while the receiver converts bipolar RS-232 signals back into logic-level voltages. The ADM237LAN belongs to the interface IC hierarchy as a communication transceiver and provides the electrical conversion required between CMOS systems and the EIA-232-E signal interface.
The five-driver and three-receiver arrangement supports equipment with more transmit channels than receive channels. Onboard DC-DC converters allow the driver outputs to achieve a 9 V swing from one 5 V supply, reducing the external power-supply count in compact serial interfaces. The device also includes low-power shutdown, receiver activity during shutdown, and small 1 F capacitors as highlighted in the indexed datasheet information.
RS-232 receivers in the ADM237LAN support input voltages up to 30 V. This tolerance helps protect receiver inputs when connected to an RS-232 port that may experience transients or voltage offsets. The CMOS implementation operates from a single 5 V supply and is intended for EIA-232-E and V.28 communications interfaces, including applications where a separate 12 V rail is unavailable.
Typical uses include industrial control consoles, data acquisition equipment, test instruments, service interfaces, and embedded serial ports. Designers can use the ADM237LAN to bridge a 5 V controller to an RS-232 host while retaining a 120 kB/s communication rate. In multi-port systems, the asymmetric channel count should be matched to the actual cable directions and loading requirements of each port.
The primary design consideration is ensuring that every driver and receiver has a defined signal path. Place the specified charge-pump capacitors close to their associated pins, route the interface connector and cable return path to minimize noise pickup, and use the receiver tolerance rating only as protection margin rather than as a substitute for correct RS-232 voltage levels.
This page organizes the ADM237LAN's core interface, electrical, package, and lifecycle information with practical application guidance, shutdown considerations, and a validation-conscious replacement workflow. It also distinguishes confirmed product characteristics from parameters that require confirmation before a new PCB layout or production release.
Drop-in alternatives for ADM237LAN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
ADM237LANZ
✅ Drop-In📋 Reference alternative (not in catalog)
ADM237LAN Specifications
| Product Type | 5/3 RS-232 transceiver |
| Supply Voltage | 5 V |
| Technology | CMOS |
| Maximum Data Rate | 120 kB/s |
| Interface Compliance | EIA-232-E and V.28 |
| Driver Count | 5 |
| Receiver Count | 3 |
| DC-DC Converter | Onboard |
| Driver Output Swing | 9 V from a 5 V supply |
| Charge-Pump Capacitor Value | 1 F |
| Shutdown Function | Low-power shutdown |
| Receiver State During Shutdown | Active |
| Maximum Receiver Input Voltage | 30 V |
| Package | 24-PDIP |
| Pin Count | 24 pins |
| Mounting Type | Through-hole |
ADM237LAN 24-pdip Pin Configuration Guide
Pin configuration for ADM237LAN (24-pdip package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ADM237LAN.
Refer to the datasheet for full pin configuration.
Typical Applications
ADM237LAN is suitable for 6 applications: Industrial Control Console Interfaces, Data Acquisition Equipment, Test and Measurement Instruments, Embedded Serial Port Expansion, Service and Configuration Ports, Communications Adapter Equipment.
Industrial Control Console Interfaces
The ADM237LAN fits industrial control-console designs that must translate between 5 V CMOS logic and an RS-232 service or operator port. Its five drivers and three receivers provide flexibility for several data paths, while the 120 kB/s rate is suitable for command traffic, configuration transfers, and diagnostic protocols. The onboard DC-DC converters and 9 V driver swing eliminate the need for a separate 12 V supply rail. Designers should reserve one receiver for the primary command link and avoid assigning unused channels without checking the datasheet pin table.
Data Acquisition Equipment
ADM237LAN is appropriate for laboratory and industrial data-acquisition equipment that exchanges commands or sampled data with a host computer through RS-232. A 120 kB/s interface can support moderate-rate control traffic, while the five-driver and three-receiver configuration supports multi-channel equipment architectures. The single 5 V supply simplifies embedded instrumentation, and receiver inputs up to 30 V add tolerance to connected ports. For long cables or electrically noisy environments, retain the RS-232 return path and validate the complete cable and grounding arrangement.
Test and Measurement Instruments
The ADM237LAN can serve as the RS-232 communications interface in bench instruments, programmable sources, and automated test systems. Its 5 V CMOS operation fits controller-heavy designs that do not expose a separate high-voltage supply, while the 120 kB/s limit is appropriate for remote commands and moderate test-result transfers. Five driver channels can support several peripheral connections, although each cable requires careful reference-ground routing. Validate command latency and sustained data throughput before choosing the interface rate for automated production systems.
Embedded Serial Port Expansion
ADM237LAN is useful when an embedded controller needs multiple RS-232-compatible channels but only supports a 5 V supply. The device combines five transmitters and three receivers in one 24-PDIP package, reducing the number of separate interface packages required when direction counts differ across ports. Onboard DC-DC conversion produces a 9 V driver swing from the 5 V rail. Confirm the host's RS-232 logic levels and handshake requirements, and use only the receive channels needed for each cable connection.
Service and Configuration Ports
The ADM237LAN fits service-oriented equipment that needs a legacy-compatible RS-232 maintenance connection alongside 5 V digital control logic. The EIA-232-E and V.28 interface objectives, 120 kB/s data rate, and three receivers allow a system to combine configuration, logging, and status connections when cable topology permits. Low-power shutdown can reduce activity when the service interface is not required. Confirm the meaning of receiver operation during shutdown and implement the manufacturer-specified capacitor network before finalizing the layout.
Communications Adapter Equipment
ADM237LAN can be used in protocol adapters, equipment gateways, and legacy peripheral controllers that translate between CMOS logic and RS-232. The 5/3 channel arrangement supports equipment with several outgoing data streams and fewer incoming signals, while the 120 kB/s capability suits short control and configuration links. Its 24-PDIP through-hole package is straightforward for prototyping and leaded assembly. Engineers should verify connector protection, ground continuity, and cable length because RS-232 communication reliability depends on the complete physical interface, not only the transceiver.
Engineering reference data for ADM237LAN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Analog Devices |
| Package | 24-PDIP |
| Product Type | 5/3 RS-232 transceiver |
| Supply Voltage | 5 V |
| Maximum Data Rate | 120 kB/s |
| Driver Count | 5 |
| Receiver Count | 3 |
| Driver Output Swing | 9 V from a 5 V supply |
| Receiver Input Tolerance | 30 V |
| Onboard DC-DC Converters | Yes |
| Interface Standards | EIA-232-E and V.28 |
| Shutdown Behavior | Low-power shutdown with receivers active |
Key Differentiators
- Five transmitters and three receivers in one interface device (vs A conventional four-driver and four-receiver RS-232 transceiver)
- Single 5 V supply with onboard DC-DC conversion (vs A conventional RS-232 interface requiring a separate 12 V rail)
- High receiver-input voltage tolerance (vs A lower-tolerance RS-232 receiver implementation)
Design Notes
Place the capacitors associated with the onboard DC-DC converters directly beside their designated pins and keep the high-current charge-pump loops compact. Follow the manufacturer layout artwork for component orientation and return-current paths. The through-hole 24-PDIP format provides convenient prototype assembly, but capacitor placement still determines whether switching transients couple into sensitive analog or logic circuitry on the same board.
Keep each RS-232 driver output away from receiver inputs and unrelated clocks unless the interface architecture requires them to cross. Maintain a continuous signal-ground path between connected equipment, and route the cable return adjacent to the signal conductors where practical. Although the receivers accept voltages up to 30 V, that rating provides input tolerance and does not guarantee reliable communication with incorrect voltage levels or excessive cable noise.
Do not treat the 30 V receiver input rating as the expected RS-232 signal level or as permission to exceed the device's absolute maximum ratings. Verify the 24-pin pinout, supply sequencing, charge-pump capacitor values, and shutdown state before fabrication. Also confirm that the five transmitter channels and three receiver channels are assigned to the intended connector directions; package similarity alone cannot establish interchangeability with another transceiver.
Compliance Information
The indexed ADM237LAN documentation identifies EIA-232-E and V.28 interface compliance but does not establish RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose interface transceiver.