Analog Devices

ADM241LJR - 120 kbps RS-232 Transceiver | Analog Devices

MPN: ADM241LJR ✓ פעיל
5 V Vdss ≤1 µA Id 28-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ADM241LJR סקירה

The Analog Devices ADM241LJR is a four-driver, five-receiver RS-232 transceiver designed for serial communications from a single 5 V supply. It supports data rates up to 120 kbps, produces approximately ±9 V driver output swing through onboard DC-to-DC converters, and is available in a 28-pin SOIC package. The device is intended for systems that cannot provide separate ±12 V RS-232 supply rails.

An RS-232 transceiver is an interface IC that combines line drivers and receivers on a serial data link. The drivers translate low-voltage logic signals into bipolar RS-232 levels, while the receivers convert those bipolar levels back into CMOS-compatible logic. Within the broader hierarchy, the ADM241LJR is a serial-interface transceiver, an interface IC, and a semiconductor designed for data communication and signal conditioning.

The ADM241LJR operates from one 5 V supply and includes onboard DC-to-DC converters, eliminating the need for a separate negative supply for driver operation. It complies with EIA-232-E and V.28 interface requirements, supports operation at 120 kbps, and accepts receiver input voltages of ±30 V. Small 1 µF charge-pump capacitors reduce the external component count, while the shutdown feature limits supply current to 1 µA or less.

The four drivers can independently support transmit channels, and the five receivers support receive or monitoring channels. This channel mix suits equipment that requires multiple serial outputs but has an asynchronous status, control, or acknowledgment input. The receiver circuit is designed to tolerate ±30 V input levels, improving robustness in industrial environments where connected equipment can impose voltage stress on an interface port.

Typical applications include industrial control panels, test and measurement equipment, data acquisition systems, point-of-sale terminals, and service interfaces for remotely operated equipment. The 120 kbps maximum rate is suitable for legacy serial links, configuration ports, and equipment-control links that do not require the throughput and protocol complexity of a modern high-speed serial interface.

Designers should place charge-pump capacitors and interface protection components close to the device, route driver outputs as short as practical, and maintain a common ground reference between communicating systems. The 5 V supply and ground planes require normal bypass-capacitor placement, while exposed RS-232 connectors should include suitable surge and electrostatic-discharge protection because the ADM241LJR is not presented as a dedicated hardened RS-485 transceiver.

This page combines the ADM241LJR operating characteristics, interface use cases, design considerations, and verified source links to support component selection, schematic planning, and PCB implementation.

חלופות תחליף ישיר עבור ADM241LJR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ADM241LJR (אותו גורם צורה וטביעת רגל) — שונים ב Maximum Data Rate, Package.

Analog Devices
Maximum Data Rate: 120 kB/s
Package: 20-pin SOIC
השווה עם ADM241LJR →

ADM241LJRZ

✅ Drop-In
📦 28-pin SOIC
Same ADM241L family and 28-pin SOIC package; exact temperature-grade and ordering-code differences require confirmation from the manufacturer ordering information.

📋 חלופה להתייחסות (לא בקטלוג)

ADM241LJR מפרטים

Device Type 4/5 RS-232 transceiver
Number of Drivers 4 channels
Number of Receivers 5 channels
מתח אספקה 5 V
Maximum Data Rate 120 kbps
Driver Output Swing ±9 V
Receiver Input Voltage Range ±30 V
Charge-Pump Capacitor 1 µF
Shutdown Supply Current ≤1 µA
Interface Standard EIA-232-E and V.28
מארז 28-pin SOIC
סוג הרכבה Surface mount
Logic Technology CMOS
Integrated DC-to-DC Converter Yes
Receiver Latch-Up Protection Latch-up free

מדריך תצורת פינים של ADM241LJR 28-pin soic

תצורת פינים עבור ADM241LJR (מארזת 28-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 28-pin soic עבור ADM241LJR

אין נתוני פריסת פינים מפורטים עבור ADM241LJR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADM241LJR מתאים עבור 6 יישוםs: Industrial Control Panels, Data Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Instruments, Remote Equipment Interfaces, Service and Configuration Ports.

🏭

Industrial Control Panels

The ADM241LJR fits industrial control panels that need several low-speed serial command channels and status inputs while operating from a single 5 V rail. Its four drivers can send commands or setpoints to connected equipment, while five receivers can monitor acknowledgments, interlocks, and diagnostic states. The 120 kbps rate is appropriate for many legacy controller links. According to the manufacturer datasheet, onboard DC-to-DC converters produce approximately ±9 V output from one 5 V supply, simplifying the power architecture. The principal design considerations are common grounding between communicating systems, controlled connector exposure, and ESD or surge protection at the external RS-232 port.

📟

Data Acquisition Equipment

The ADM241LJR is useful in laboratory and industrial data-acquisition equipment that combines command outputs with multiple monitoring inputs. A host can transmit configuration commands over up to four driver channels and collect acknowledgments or status flags through five receiver channels. Its 120 kbps maximum data rate suits equipment-control traffic that is latency-sensitive but modest in bandwidth. The single 5 V supply requirement is valuable in portable or space-constrained instruments, while the integrated converters eliminate a separate negative supply rail. Engineers should use the pin-description table for assignments and place the required 1 µF charge-pump capacitors near the device.

🖥️

Point-of-Sale Terminals

The ADM241LJR can support serial peripheral connections in point-of-sale terminals, receipt equipment, scales, and customer-facing accessories. Four transmit channels provide flexible control of multiple attached devices, and five receive channels support responses, ready signals, and asynchronous status inputs. Operating from one 5 V rail simplifies adapter-powered terminal designs, while the 120 kbps rate covers conventional peripheral interfaces. The ADM241LJR's approximately ±9 V driver swing is generated internally, so no separate negative rail is required. Install appropriate protection at user-accessible connectors and keep exposed serial traces away from high-current switching paths to reduce coupling and ground-offset problems.

🔧

Test and Measurement Instruments

The ADM241LJR is appropriate for legacy test and measurement instruments that offer RS-232 service ports for remote control and result transfer. Four outputs can carry commands or trigger signals, while five inputs can receive status, ready, and error information from an external controller. The 120 kbps rate is sufficient for many automated test systems that exchange short commands and responses. A single 5 V supply simplifies front-panel and portable instrument power trees, and the onboard DC-to-DC converters reduce the component count required to create RS-232 levels. Design the interface with controlled ground references, short driver routes, and connector-side protection for field-accessible ports.

🌐

Remote Equipment Interfaces

The ADM241LJR is well suited to remote equipment interfaces where one controller must issue multiple commands and monitor several independent lines. Examples include communications equipment, laboratory peripherals, and service ports requiring more channels than a compact two-channel transceiver provides. The four drivers and five receivers offer asymmetric channel capacity suited to command-and-status traffic. Its receiver inputs tolerate ±30 V, which improves robustness when connected equipment applies greater voltage than the local logic rails. The 5 V architecture remains appropriate for embedded systems without a negative supply. Correct operation still requires a common reference ground, compliant cable routing, and suitable protection at the external connector.

🔌

Service and Configuration Ports

The ADM241LJR can implement a multi-channel service interface for embedded equipment that must support configuration downloads, diagnostics, and handshake signals. Four transmit channels allow several commands to be routed toward a service harness, and five receiver channels can monitor separate acknowledgments or hardware status lines. The 120 kbps rate aligns with conventional service-port traffic and avoids the overhead of a more complex high-speed interface. Because the device runs from one 5 V supply and creates its own bipolar driver voltage, it simplifies isolated auxiliary rails inside cost-sensitive systems. Production designs should add appropriate transient protection and verify shutdown-state behavior against the host firmware requirements.

What are the key specifications of ADM241LJR that engineers should know?
The ADM241LJR is a 5 V, 120 kbps RS-232 transceiver with four drivers, five receivers, approximately ±9 V driver output swing, and a 28-pin SOIC package. According to the Analog Devices ADM241L datasheet, onboard DC-to-DC converters generate the bipolar driver voltage from one supply, while the receiver inputs tolerate ±30 V. These characteristics make it useful for legacy serial interfaces that require multiple channels without separate ±12 V rails.
What is the operating voltage of ADM241LJR?
The ADM241LJR operates from a single 5 V supply. The Analog Devices ADM241L datasheet identifies onboard DC-to-DC converters that support approximately ±9 V output swing from that 5 V source, avoiding the need for a separate negative supply rail. Normal implementation should include local supply bypassing and the datasheet-specified 1 µF charge-pump capacitors.
How many RS-232 drivers and receivers does ADM241LJR have?
The ADM241LJR contains four RS-232 drivers and five RS-232 receivers. The manufacturer product information identifies it as a 4/5 transceiver in a 28-pin SOIC package. This unequal channel count is useful when one system must monitor or acknowledge more incoming signals than it transmits.
What is the maximum data rate of ADM241LJR?
The ADM241LJR supports a maximum data rate of 120 kbps. According to the Analog Devices ADM241L datasheet, the device meets EIA-232-E and V.28 interface specifications while operating from one 5 V supply. It is therefore appropriate for conventional RS-232 control and data links that do not require higher-throughput protocols.
Where can I download the ADM241LJR datasheet PDF?
The official Analog Devices ADM241L product page is the preferred starting point for the ADM241L datasheet and product information. It identifies the device as a 5 V powered CMOS RS-232 driver and receiver family member with 120 kbps operation and onboard DC-to-DC converters. Use the package-specific ADM241LJR ordering information when confirming lead configuration and suffix details.
Where can I find the ADM241LJR pinout?
The ADM241LJR pin assignment is shown in the pin-description table and package drawing in the Analog Devices ADM241L datasheet. The distributor listing identifies the exact ADM241LJR orderable device as a 28-SOIC, four-driver, five-receiver RS-232 transceiver. Use that package drawing to assign power, ground, driver outputs, receiver inputs, enable, and shutdown functions before laying out the PCB.
Does ADM241LJR need both positive and negative power supplies?
No. The ADM241LJR requires a single 5 V supply, and its onboard DC-to-DC converters provide the bipolar voltage needed for approximately ±9 V driver output. This integration is the main practical distinction from discrete RS-232 interface designs using separate positive and negative supplies. External 1 µF charge-pump capacitors remain part of the converter implementation.
Is ADM241LJR suitable for industrial control equipment?
The ADM241LJR is suitable for many industrial control and data-acquisition interfaces because it supports a 120 kbps data rate, ±30 V receiver input tolerance, and EIA-232-E and V.28 operation from one 5 V supply. Its four transmitters and five receivers accommodate multiple control and monitoring signals. The host system should still provide connector-level surge and electrostatic-discharge protection.
What can replace the ADM241LJR?
The ADM241LJR requires careful replacement verification because channel count, supply architecture, shutdown behavior, package, and pin assignments must all match. Ordering-code changes that represent reel or packaging differences do not create a distinct drop-in alternative. Use the Request a Quote form on this page when requesting an exact replacement review, and confirm the candidate against the manufacturer pin and parameter tables before committing to a PCB revision.
What is the best drop-in replacement for ADM241LJR?
No alternative can be confirmed as a five-part drop-in replacement from the available component data. A valid replacement must match the 28-SOIC footprint, pin functions, 5 V supply architecture, four-driver and five-receiver arrangement, 120 kbps rate, shutdown behavior, and key logic levels. Use the Request a Quote form on this page with the required channel count and interface constraints for a like-for-like sourcing review.
Is ADM241LJR the same as ADM241LJRZ?
ADM241LJR and ADM241LJRZ should not be assumed to be electrically distinct devices based on ordering code alone. ADM241LJRZ is commonly associated with a different packing or ordering treatment, but the available product pages do not establish that it provides meaningful engineering differentiation. Confirm the exact suffix, package, and tape-and-reel configuration with the manufacturer before treating either orderable code as interchangeable.
When should I choose ADM241LJR over a discrete RS-232 interface?
Choose the ADM241LJR when a compact design needs four drivers, five receivers, one 5 V supply, and onboard generation of the bipolar driver voltage. The integrated approach reduces the number of external power rails and converter components, while the 28-SOIC package simplifies assembly. A discrete or split-supply interface may be preferable when independent supply control, different channel counts, or legacy ±12 V rails are mandatory.
Is ADM241LJR suitable for a 120 kbps control link?
Yes, the ADM241LJR is rated for operation up to 120 kbps and meets EIA-232-E and V.28 specifications according to the Analog Devices ADM241L datasheet. It is appropriate for legacy equipment-control, configuration, and asynchronous data links at that rate. Confirm signal timing, cable length, grounding, and connector protection in the completed system.
Where to buy ADM241LJR online?
Use the Request a Quote form on this page to request ADM241LJR availability, order quantities, and the appropriate 28-SOIC configuration. The form provides a direct sourcing path for the exact MPN without substituting a different suffix or package. Current lead time and stock status should be confirmed when the quotation is returned.
What is the price of ADM241LJR?
Current ADM241LJR pricing is obtained through the Request a Quote form on this page. The form allows quantity and order details to be reviewed against current channel and packaging availability. Pricing should not be inferred from family listings or alternate order codes because quantity breaks and package treatments can change the commercial result.
What is the lead time for ADM241LJR?
The current ADM241LJR lead time is confirmed through the Request a Quote form on this page. Include the required quantity, shipment destination, and preferred 28-SOIC packing format in the request. The manufacturer product page remains the authoritative source for device availability and lifecycle status, while the quotation response should state the current manufacturing and allocation position.

נתוני עזר הנדסיים עבור ADM241LJR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADM241LJR when the design needs four RS-232 transmit channels, five receive channels, operation at up to 120 kbps, and a single 5 V supply. Its onboard DC-to-DC converters are particularly valuable in systems that cannot economically provide ±12 V rails. The 28-SOIC package also provides a conventional surface-mount assembly option for medium-density industrial, test, and control equipment. A two-channel transceiver is appropriate when the application needs only one transmit and one receive path. A discrete driver and receiver design may be preferable when independent supply control, unusual logic thresholds, or a different channel arrangement is required. Before ordering any replacement, verify the exact pin assignments, shutdown behavior, receiver-input tolerance, and charge-pump layout against the manufacturer datasheet. Packing-only order codes should not be treated as distinct engineering alternatives.

השוואה עם חלופות

פרמטר מוצר זה
Package 28-pin SOIC
Brand Analog Devices
Device Type 4/5 RS-232 transceiver
Supply Voltage 5 V
Maximum Data Rate 120 kbps
Number of Drivers 4 channels
Number of Receivers 5 channels
Driver Output Swing ±9 V
Receiver Input Tolerance ±30 V
Shutdown Supply Current ≤1 µA
Interface Compliance EIA-232-E and V.28
Integrated Voltage Conversion Onboard DC-to-DC converters

מבדילים עיקריים

  • Single-supply bipolar driver capability (לעומתDiscrete RS-232 driver design)
  • Asymmetric four-driver and five-receiver arrangement (לעומתTwo-channel RS-232 transceiver)
  • Integrated shutdown control (לעומתAlways-powered RS-232 transceiver)

הערות תכנון

Place the two 1 µF charge-pump capacitors and the device supply bypass capacitor as close as practical to their associated pins. Keep the high-current charge-pump paths compact and away from sensitive receiver inputs. Follow the capacitor and grounding arrangement in the manufacturer datasheet because long charge-pump traces can increase radiated emissions and susceptibility to external noise.

Do not treat the ±30 V receiver-input rating as permission to omit connector protection. RS-232 ports can receive electrostatic discharge or surge transients, so use suitable protection components and a defined chassis-to-signal-ground strategy. Also verify that every unused driver output and receiver input is connected according to the datasheet pin-description table rather than left to an arbitrary termination.

Route each driver output as a short, direct trace to its connector or protected interface node, and keep these outputs away from low-level receive traces. Provide a low-impedance ground plane and use a common signal-ground reference between communicating systems. The integrated DC-to-DC converters reduce external parts, but their charge-pump nodes and switching energy still require normal high-speed layout discipline.

Use a stable 5 V supply with local high-frequency bypass and verify startup and shutdown sequencing in the complete system. The shutdown feature limits supply current to 1 µA or less, but external pull networks, protection devices, and indicator circuits can dominate the total standby current. Measure the finished board rather than relying only on the device-level specification.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product information confirms EIA-232-E and V.28 interface compliance. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.

חיפושים קשורים

ADM241LJR datasheet ADM241LJR pinout ADM241LJR datasheet pdf ADM241LJR equivalent ADM241LJR replacement ADM241LJR 28-SOIC ADM241LJR 120 kbps ADM241LJR 5 V supply Analog Devices ADM241LJR ADM241LJR RS-232 transceiver ADM241LJR industrial control ADM241LJR price ADM241LJR stock

רכיבים ומונחים קשורים

Analog Devices ADM241LJR ADM241L RS-232 transceiver serial interface IC interface IC semiconductor CMOS line driver CMOS line receiver EIA-232-E V.28 DC-to-DC converter charge-pump capacitor 28-pin SOIC SOIC family surface-mount package 120 kbps ±9 V output swing ±30 V receiver input single 5 V supply shutdown mode industrial control data acquisition test and measurement
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר