ADM241LJR - 120 kbps RS-232 Transceiver | Analog Devices
MPN: ADM241LJR ✓ 啟用中ADM241LJR 概覽
An RS-232 transceiver is an interface IC that combines line drivers and receivers on a serial data link. The drivers translate low-voltage logic signals into bipolar RS-232 levels, while the receivers convert those bipolar levels back into CMOS-compatible logic. Within the broader hierarchy, the ADM241LJR is a serial-interface transceiver, an interface IC, and a semiconductor designed for data communication and signal conditioning.
The ADM241LJR operates from one 5 V supply and includes onboard DC-to-DC converters, eliminating the need for a separate negative supply for driver operation. It complies with EIA-232-E and V.28 interface requirements, supports operation at 120 kbps, and accepts receiver input voltages of ±30 V. Small 1 µF charge-pump capacitors reduce the external component count, while the shutdown feature limits supply current to 1 µA or less.
The four drivers can independently support transmit channels, and the five receivers support receive or monitoring channels. This channel mix suits equipment that requires multiple serial outputs but has an asynchronous status, control, or acknowledgment input. The receiver circuit is designed to tolerate ±30 V input levels, improving robustness in industrial environments where connected equipment can impose voltage stress on an interface port.
Typical applications include industrial control panels, test and measurement equipment, data acquisition systems, point-of-sale terminals, and service interfaces for remotely operated equipment. The 120 kbps maximum rate is suitable for legacy serial links, configuration ports, and equipment-control links that do not require the throughput and protocol complexity of a modern high-speed serial interface.
Designers should place charge-pump capacitors and interface protection components close to the device, route driver outputs as short as practical, and maintain a common ground reference between communicating systems. The 5 V supply and ground planes require normal bypass-capacitor placement, while exposed RS-232 connectors should include suitable surge and electrostatic-discharge protection because the ADM241LJR is not presented as a dedicated hardened RS-485 transceiver.
This page combines the ADM241LJR operating characteristics, interface use cases, design considerations, and verified source links to support component selection, schematic planning, and PCB implementation.
直接替換替代品,適用於 ADM241LJR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADM241LJR (相同外形與佔位) — 差異在於 Maximum Data Rate, Package.
ADM241LJRZ
✅ 直接替換📋 參考替代品(不在目錄中)
ADM241LJR 規格
| Device Type | 4/5 RS-232 transceiver |
| Number of Drivers | 4 channels |
| Number of Receivers | 5 channels |
| 供應電壓 | 5 V |
| Maximum Data Rate | 120 kbps |
| Driver Output Swing | ±9 V |
| Receiver Input Voltage Range | ±30 V |
| Charge-Pump Capacitor | 1 µF |
| Shutdown Supply Current | ≤1 µA |
| Interface Standard | EIA-232-E and V.28 |
| 封裝 | 28-pin SOIC |
| 安裝類型 | Surface mount |
| Logic Technology | CMOS |
| Integrated DC-to-DC Converter | Yes |
| Receiver Latch-Up Protection | Latch-up free |
ADM241LJR 28-pin soic 腳位配置指南
ADM241LJR(28-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADM241LJR.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADM241LJR 適用於 6 應用s: Industrial Control Panels, Data Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Instruments, Remote Equipment Interfaces, Service and Configuration Ports.
Industrial Control Panels
The ADM241LJR fits industrial control panels that need several low-speed serial command channels and status inputs while operating from a single 5 V rail. Its four drivers can send commands or setpoints to connected equipment, while five receivers can monitor acknowledgments, interlocks, and diagnostic states. The 120 kbps rate is appropriate for many legacy controller links. According to the manufacturer datasheet, onboard DC-to-DC converters produce approximately ±9 V output from one 5 V supply, simplifying the power architecture. The principal design considerations are common grounding between communicating systems, controlled connector exposure, and ESD or surge protection at the external RS-232 port.
推薦
Data Acquisition Equipment
The ADM241LJR is useful in laboratory and industrial data-acquisition equipment that combines command outputs with multiple monitoring inputs. A host can transmit configuration commands over up to four driver channels and collect acknowledgments or status flags through five receiver channels. Its 120 kbps maximum data rate suits equipment-control traffic that is latency-sensitive but modest in bandwidth. The single 5 V supply requirement is valuable in portable or space-constrained instruments, while the integrated converters eliminate a separate negative supply rail. Engineers should use the pin-description table for assignments and place the required 1 µF charge-pump capacitors near the device.
推薦
Point-of-Sale Terminals
The ADM241LJR can support serial peripheral connections in point-of-sale terminals, receipt equipment, scales, and customer-facing accessories. Four transmit channels provide flexible control of multiple attached devices, and five receive channels support responses, ready signals, and asynchronous status inputs. Operating from one 5 V rail simplifies adapter-powered terminal designs, while the 120 kbps rate covers conventional peripheral interfaces. The ADM241LJR's approximately ±9 V driver swing is generated internally, so no separate negative rail is required. Install appropriate protection at user-accessible connectors and keep exposed serial traces away from high-current switching paths to reduce coupling and ground-offset problems.
推薦
Test and Measurement Instruments
The ADM241LJR is appropriate for legacy test and measurement instruments that offer RS-232 service ports for remote control and result transfer. Four outputs can carry commands or trigger signals, while five inputs can receive status, ready, and error information from an external controller. The 120 kbps rate is sufficient for many automated test systems that exchange short commands and responses. A single 5 V supply simplifies front-panel and portable instrument power trees, and the onboard DC-to-DC converters reduce the component count required to create RS-232 levels. Design the interface with controlled ground references, short driver routes, and connector-side protection for field-accessible ports.
推薦
Remote Equipment Interfaces
The ADM241LJR is well suited to remote equipment interfaces where one controller must issue multiple commands and monitor several independent lines. Examples include communications equipment, laboratory peripherals, and service ports requiring more channels than a compact two-channel transceiver provides. The four drivers and five receivers offer asymmetric channel capacity suited to command-and-status traffic. Its receiver inputs tolerate ±30 V, which improves robustness when connected equipment applies greater voltage than the local logic rails. The 5 V architecture remains appropriate for embedded systems without a negative supply. Correct operation still requires a common reference ground, compliant cable routing, and suitable protection at the external connector.
推薦
Service and Configuration Ports
The ADM241LJR can implement a multi-channel service interface for embedded equipment that must support configuration downloads, diagnostics, and handshake signals. Four transmit channels allow several commands to be routed toward a service harness, and five receiver channels can monitor separate acknowledgments or hardware status lines. The 120 kbps rate aligns with conventional service-port traffic and avoids the overhead of a more complex high-speed interface. Because the device runs from one 5 V supply and creates its own bipolar driver voltage, it simplifies isolated auxiliary rails inside cost-sensitive systems. Production designs should add appropriate transient protection and verify shutdown-state behavior against the host firmware requirements.
推薦
推薦產品摘要
工程參考資料,適用於 ADM241LJR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 28-pin SOIC |
| Brand | Analog Devices |
| Device Type | 4/5 RS-232 transceiver |
| Supply Voltage | 5 V |
| Maximum Data Rate | 120 kbps |
| Number of Drivers | 4 channels |
| Number of Receivers | 5 channels |
| Driver Output Swing | ±9 V |
| Receiver Input Tolerance | ±30 V |
| Shutdown Supply Current | ≤1 µA |
| Interface Compliance | EIA-232-E and V.28 |
| Integrated Voltage Conversion | Onboard DC-to-DC converters |
主要差異化特點
- Single-supply bipolar driver capability (對比Discrete RS-232 driver design)
- Asymmetric four-driver and five-receiver arrangement (對比Two-channel RS-232 transceiver)
- Integrated shutdown control (對比Always-powered RS-232 transceiver)
設計說明
Place the two 1 µF charge-pump capacitors and the device supply bypass capacitor as close as practical to their associated pins. Keep the high-current charge-pump paths compact and away from sensitive receiver inputs. Follow the capacitor and grounding arrangement in the manufacturer datasheet because long charge-pump traces can increase radiated emissions and susceptibility to external noise.
Do not treat the ±30 V receiver-input rating as permission to omit connector protection. RS-232 ports can receive electrostatic discharge or surge transients, so use suitable protection components and a defined chassis-to-signal-ground strategy. Also verify that every unused driver output and receiver input is connected according to the datasheet pin-description table rather than left to an arbitrary termination.
Route each driver output as a short, direct trace to its connector or protected interface node, and keep these outputs away from low-level receive traces. Provide a low-impedance ground plane and use a common signal-ground reference between communicating systems. The integrated DC-to-DC converters reduce external parts, but their charge-pump nodes and switching energy still require normal high-speed layout discipline.
Use a stable 5 V supply with local high-frequency bypass and verify startup and shutdown sequencing in the complete system. The shutdown feature limits supply current to 1 µA or less, but external pull networks, protection devices, and indicator circuits can dominate the total standby current. Measure the finished board rather than relying only on the device-level specification.
合規資訊
The manufacturer product information confirms EIA-232-E and V.28 interface compliance. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.