ADM3061EBRMZ-RL7 - 500kbps RS-485 Transceiver | Analog Devices
MPN: ADM3061EBRMZ-RL7 ✓ פעילADM3061EBRMZ-RL7 סקירה
RS-485 is a standard for multipoint communication systems, allowing multiple devices to share a two-wire bus. The ADM3061E is a transceiver that converts UART signals to differential RS-485 levels, enabling long-distance, noise-immune data transfer. It is part of the interface IC family, specifically designed for industrial automation, building control, and instrumentation.
Key features include a 1/1 driver/receiver configuration, half-duplex operation, and a receiver hysteresis of 30 mV for noise immunity. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for industrial environments. The MSOP-8 package offers a compact footprint, and the tape-and-reel packaging (RL7) facilitates automated assembly.
The ADM3061E uses a standard RS-485 architecture with a differential driver and receiver. The driver outputs are short-circuit protected, and the receiver has a fail-safe feature that ensures a high output when the bus is open, shorted, or idle. The device also features thermal shutdown protection to prevent damage from excessive power dissipation.
Typical applications include industrial control systems, building automation, HVAC controllers, and remote sensor networks. The wide supply range and ESD protection make it ideal for factory floor installations where electrical noise and transient voltages are common.
When designing with this device, ensure proper termination resistors (120 Ω) at both ends of the bus to minimize reflections. The A and B pins should be biased to a known state to avoid undefined receiver outputs when the bus is idle.
חלופות תחליף ישיר עבור ADM3061EBRMZ-RL7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ADM3061EBRMZ-R7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADM3061EBRMZ-RL7 מפרטים
| Type | Transceiver |
| Protocol | RS-485 |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 30 mV |
| קצב נתונים | 500 kbps |
| מתח אספקה | 3 V to 5.5 V |
| טמפרטורת פעולה | -40°C to +125°C |
| סוג הרכבה | Surface Mount |
| מארז / Case | 8-MSOP |
| ESD Protection | ±12 kV IEC (A and B pins) |
| Fail-Safe | Open, short, idle |
| כיבוי תרמי | Yes |
| סטטוס RoHS | Compliant |
| Packaging | Tape & Reel (RL7) |
תצורת פינים של ADM3061EBRMZ-RL7
| פין 1 | RO — Receiver output |
| פין 2 | RE — Receiver enable (active low) |
| פין 3 | DE — Driver enable (active high) |
| פין 4 | DI — Driver input |
| פין 5 | GND — Ground |
| פין 6 | A — Non-inverting bus pin |
| פין 7 | B — Inverting bus pin |
| פין 8 | VCC — Power supply |
יישומים טיפוסיים
ADM3061EBRMZ-RL7 מתאים עבור 6 יישוםs: Industrial Control Systems, Building Automation, Remote Sensor Networks, HVAC Controllers, Instrumentation, Security Systems.
Industrial Control Systems
The ADM3061EBRMZ-RL7 is ideal for industrial control systems where reliable, long-distance communication is critical. Its 500 kbps data rate and ±12 kV ESD protection ensure robust operation in noisy factory environments. The wide supply voltage range (3.0 V to 5.5 V) allows integration with various logic levels, and the half-duplex operation simplifies wiring in multi-drop networks. The MSOP-8 package saves PCB space, making it suitable for compact PLC modules and remote I/O units.
מומלץ
Building Automation
In building automation, the ADM3061EBRMZ-RL7 enables communication between HVAC controllers, lighting systems, and security panels. Its fail-safe receiver ensures a defined output when the bus is idle, preventing false triggers. The -40°C to +125°C temperature range allows operation in unconditioned spaces. The device's low power consumption and 3.3 V operation make it suitable for battery-powered sensors. The compact MSOP package fits into small form-factor controllers.
מומלץ
Remote Sensor Networks
The ADM3061EBRMZ-RL7 is well-suited for remote sensor networks that require long-distance data transmission. Its differential signaling provides noise immunity over long cable runs, and the 500 kbps data rate is sufficient for most sensor data. The ±12 kV ESD protection guards against electrostatic discharge during installation and maintenance. The wide supply range allows operation from battery or solar-powered systems. The half-duplex interface reduces wiring complexity in multi-point networks.
מומלץ
HVAC Controllers
The ADM3061EBRMZ-RL7 is used in HVAC controllers to communicate with thermostats, dampers, and central management systems. Its robust ESD protection and wide temperature range ensure reliable operation in rooftop units and mechanical rooms. The 3.0 V to 5.5 V supply range allows direct interfacing with both 3.3 V and 5 V microcontrollers. The fail-safe receiver prevents false commands during bus idle, enhancing system safety. The MSOP-8 package is ideal for space-constrained controller boards.
מומלץ
Instrumentation
In instrumentation, the ADM3061EBRMZ-RL7 provides reliable communication between measurement devices and data acquisition systems. Its 500 kbps data rate supports high-speed data logging, and the ±12 kV ESD protection ensures durability in field use. The wide supply range and low power consumption make it suitable for portable instruments. The half-duplex operation simplifies cabling in multi-device setups. The compact MSOP package allows integration into handheld devices.
מומלץ
Security Systems
The ADM3061EBRMZ-RL7 is used in security systems for communication between control panels, sensors, and cameras. Its fail-safe receiver ensures reliable operation even when the bus is idle, preventing false alarms. The ±12 kV ESD protection is critical for outdoor installations. The wide temperature range allows operation in extreme environments. The half-duplex interface reduces wiring cost in large installations. The MSOP-8 package is suitable for compact security modules.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADM3061EBRMZ-RL7 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADM3061EBRMZ-R7 | ADM3061EBRZ | MAX3485E | ISL3170E |
|---|---|---|---|---|---|
| Package | 8-MSOP | 8-MSOP | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Renesas |
| Data Rate | 500 kbps | 500 kbps | 500 kbps | 10 Mbps | 20 Mbps |
| Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 3.6 V | 3 V to 3.6 V |
| ESD Protection | ±12 kV IEC | ±12 kV IEC | ±12 kV IEC | ±15 kV HBM | ±16.5 kV HBM |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C | -40°C to +85°C |
| Fail-Safe | Open, short, idle | Open, short, idle | Open, short, idle | Open, short, idle | Open, short, idle |
| Price (1pc) | $2.45 | $2.45 | $2.30 | $1.80 | $2.00 |
מבדילים עיקריים
- Wide supply voltage range (3.0 V to 5.5 V) (לעומתMAX3485E)
- Extended temperature range (-40°C to +125°C) (לעומתISL3170E)
- ±12 kV IEC ESD protection (לעומתMAX3485E)
הערות תכנון
Place the ADM3061EBRMZ-RL7 close to the bus connector to minimize trace length and reduce EMI. Use 120 Ω termination resistors at both ends of the RS-485 bus to prevent signal reflections. Keep the A and B traces parallel and close together to maintain differential impedance.
Decouple the VCC pin with a 0.1 µF ceramic capacitor placed as close as possible to the device. For noisy industrial environments, add a 10 µF electrolytic capacitor in parallel. Ensure the ground plane is solid and continuous to provide a low-impedance return path.
Do not leave the RE and DE pins floating; tie them to appropriate logic levels to avoid unintended operation. When the bus is idle, ensure proper biasing to maintain a defined receiver output. Avoid exceeding the absolute maximum ratings on the A and B pins, as this can damage the device despite ESD protection.
מידע על תאימות
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified.
