Texas Instruments

ADS1286PK - 12-Bit Micropower SAR ADC | Texas Instruments

MPN: ADS1286PK ✓ פעיל
250 µA typical Vdss 8-pin PDIP Package
כמות הזמנה מינימלית: 1 |

ADS1286PK סקירה

The Texas Instruments ADS1286PK is a 12-bit, 20 kHz micropower sampling analog-to-digital converter with a differential input, an integrated sample-and-hold amplifier, and a supply current of 250 µA in an 8-pin PDIP package. The converter uses successive-approximation conversion and provides a single analog input channel suitable for precision, low-power signal acquisition.

An ADC is an interface component that converts an analog voltage into a digital number for processing by a microcontroller, DSP, logger, or measurement instrument. The ADS1286 belongs to the sampling ADC hierarchy, which includes sample-and-hold front ends, differential analog inputs, and serial-output converters. Its differential architecture is useful when the measurement must reject common-mode noise or when the source is balanced and centered around a reference level.

The ADS1286 provides 12-bit resolution, a maximum sampling rate of 20 kHz, and typical supply current of 250 µA. These characteristics make it suitable for low-power instrumentation where the converter must acquire sensor information while consuming little system energy. The serial interface is compatible with SPI and SSI protocols and supports communication over a two-wire or three-wire arrangement, allowing the device to operate with limited connector pins.

Internally, the ADS1286 combines a differential input, sampling circuitry, a 12-bit successive-approximation converter, and a serial interface in one package. The differential input is conditioned by the integrated sample-and-hold amplifier before conversion. Serial data output reduces the number of signal connections required, while the compact PDIP-8 package supports conventional through-hole PCB assembly and prototype rework. The exact reference-voltage, input-range, timing, and dynamic-performance details should be confirmed in the manufacturer datasheet before final circuit design.

Typical uses include portable environmental monitoring, remote sensing, industrial process measurement, low-power battery instrumentation, and small laboratory data loggers. A differential sensor such as a bridge, thermocouple interface, or current-sense element can feed the converter when its common-mode range and source impedance meet the device requirements. The 20 kHz sampling capability also permits measurement of slowly varying analog quantities without requiring a high-speed converter.

Power-supply and reference design remain central to achieving useful accuracy. Decoupling capacitors should be placed close to the supply pins, and analog and digital return currents should be routed without sharing narrow paths with the input signal. The input source impedance must be checked against the sampling network, while the reference voltage determines the conversion scale and must remain within its permitted operating range.

This page combines the manufacturer specifications, a structured pin-compatible substitute review, comparison parameters, application guidance, and practical layout considerations for engineers evaluating the ADS1286PK. The supporting information distinguishes confirmed device characteristics from parameters that still require datasheet confirmation during component selection and circuit sign-off.

חלופות תחליף ישיר עבור ADS1286PK — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADS1286PB

✅ Drop-In
📦 PDIP-8
Same 12-bit, 20 kHz ADS1286 family and PDIP-8 format; order-code attributes require confirmation because the listing snippets do not quantify temperature or packing differences

📋 חלופה להתייחסות (לא בקטלוג)

ADS1286PK דירוגים מרביים ומאפיינים חשמליים

Converter Type Successive-approximation sampling ADC
רזולוציה 12 bit
Maximum Sampling Rate 20 kHz
Number of Analog Input Channels 1 channel
Input Architecture Differential input
Sample-and-Hold Amplifier Integrated
זרם אספקה 250 µA typical
מתח אספקה 4.5 V typical
Digital Interface SPI and SSI compatible
Serial Interface Configuration 2-wire or 3-wire
טווח טמפרטורת פעולה -40 °C to +85 °C
מארז 8-pin PDIP
סוג הרכבה Through-hole
Process Technology CMOS

מדריך תצורת פינים של ADS1286PK 8-pin pdip

תצורת פינים עבור ADS1286PK (מארזת 8-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin pdip עבור ADS1286PK

אין נתוני פריסת פינים מפורטים עבור ADS1286PK.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADS1286PK מתאים עבור 6 יישוםs: Battery-Powered Environmental Sensors, Industrial Process Measurement, Remote Data Logging, Portable Medical Instruments, Portable Test and Measurement, Low-Level Signal Monitoring.

🧩

Battery-Powered Environmental Sensors

The ADS1286PK fits battery-powered environmental monitoring when temperature, humidity, gas, or soil sensors produce a low-level analog signal. Its 12-bit resolution provides 4096 code levels across the selected input range, while the differential input can help reject common-mode disturbance when the sensor output is balanced around a reference or mid-supply node. The converter samples at up to 20 kHz and typically consumes 250 µA, allowing the host to wake, acquire a reading, and return to sleep without running a continuously powered high-speed converter. The integrated sample-and-hold amplifier simplifies the front end, and the SPI- or SSI-compatible interface reduces the number of connections to a remote sensor assembly.

🏭

Industrial Process Measurement

The ADS1286PK is appropriate for slow industrial process signals that require deterministic conversion without the power and complexity of a high-speed ADC. A 20 kHz maximum sampling rate is more than adequate for many temperature, pressure, level, and current measurements, while 12-bit resolution supports moderately precise digital readings. The differential input is valuable when the transducer and cable introduce common-mode noise or when the measured quantity appears as the difference between two nodes. The 250 µA typical operating current also supports distributed acquisition nodes. For each transducer, however, the engineer should verify the input range, source impedance, reference stability, and sensor excitation scheme against the manufacturer datasheet.

🌐

Remote Data Logging

The ADS1286PK supports compact remote data loggers that must acquire analog measurements while consuming limited power. Its micropower 250 µA typical supply current and 12-bit successive-approximation conversion are suited to duty-cycled acquisition, while the two-wire or three-wire serial interface can reduce connector requirements in weather-resistant field nodes. A differential sensor connection can preserve signal integrity over cables by reducing the effect of shared interference. The 20 kHz capability also allows a node to capture events or waveforms substantially faster than a conventional low-rate data logger. Designers should still budget for reference accuracy, input filtering, surge protection, and the host's sleep and wake characteristics to determine true system-level power consumption.

💊

Portable Medical Instruments

The ADS1286PK can be evaluated for portable, low-power medical measurement modules that monitor a single low-level analog parameter. Its differential input is useful for sensing bridge-like or differentially balanced signals, and the integrated sample-and-hold amplifier reduces the number of external active components required before conversion. The 12-bit resolution and 20 kHz sampling rate are appropriate for many physiological or diagnostic signals that do not require high-bandwidth conversion, while typical supply current of 250 µA supports energy-conscious operation. Medical use nevertheless requires a full system-level risk assessment, including isolation, patient protection, input limits, accuracy, noise behavior, and applicable regulatory requirements; the ADC package alone does not establish medical certification.

⚡

Portable Test and Measurement

The ADS1286PK fits a portable handheld meter that measures a selectable analog channel and presents the converted value on a small display or sends it to a controller. Its 20 kHz maximum sampling rate permits responsive measurements and short acquisition windows, while 12-bit resolution provides a practical balance between information content, conversion time, and micropower operation. The serial interface reduces the pin count needed for the converter, leaving more interface capacity for the display, controls, and communications. Differential sensing can improve performance in instruments that measure across two input terminals rather than from a single ground-referenced source. The instrument designer should confirm input bandwidth, settling behavior, reference accuracy, and front-end protection before setting the measurement bandwidth.

📺

Low-Level Signal Monitoring

The ADS1286PK is suitable for low-level signal monitoring where a differential analog quantity must be digitized with low system power. The integrated sample-and-hold amplifier and differential input provide a compact acquisition channel, and the 12-bit successive-approximation architecture supports measurements sampled at up to 20 kHz. In a condition-monitoring system, the converter can digitize a transducer output while a microcontroller evaluates thresholds or stores the result. Typical consumption of 250 µA is useful when many channels must be powered intermittently or when the instrument operates from a small energy source. Practical accuracy depends on the selected reference, analog front end, input bandwidth, grounding, and filtering, so those elements should be evaluated as part of the complete measurement chain rather than relying on conversion resolution alone.

What is the ADS1286PK?
The ADS1286PK is a 12-bit, 20 kHz micropower sampling ADC with a differential input, an integrated sample-and-hold amplifier, and an SPI- or SSI-compatible serial interface. According to the Texas Instruments ADS1286 datasheet, the converter consumes approximately 250 µA of supply current and is offered in an 8-pin PDIP package. It is designed for compact, low-power measurement systems that acquire one analog channel and transfer conversion results through a serial interface.
What is the sampling rate and resolution of ADS1286PK?
The ADS1286PK combines 12-bit resolution with a maximum sampling rate of 20 kHz. According to the Texas Instruments ADS1286 datasheet, it is a successive-approximation sampling converter rather than a continuous delta-sigma or pipeline device. This rate is suitable for many sensor, process-control, and remote-monitoring signals while keeping supply current near the specified 250 µA typical operating level.
What is the power consumption of ADS1286PK?
The ADS1286PK typically consumes 250 µA of supply current. The Texas Instruments ADS1286 datasheet identifies this as a micropower 12-bit ADC operating at up to 20 kHz. Actual board consumption depends on supply voltage, conversion activity, clocking, interface states, and the load driven by the serial output, so an application should measure the complete acquisition circuit rather than relying only on the converter's typical current.
What serial interface does ADS1286PK use?
The ADS1286PK uses an SPI- and SSI-compatible serial interface that can operate over a two-wire or three-wire connection. The Texas Instruments ADS1286 datasheet describes the serial interface as a central feature of the converter. The reduced-wire arrangement is useful for remote sensors and compact instruments where connector pins are limited, although the final mode, clock polarity, and data timing must follow the device's timing diagrams.
Where can I download the ADS1286PK datasheet PDF?
The official ADS1286PK datasheet PDF is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/ads1286.pdf. It is the appropriate source for the complete electrical characteristics, pin descriptions, timing diagrams, application circuit, and ordering information. The component-specific PDF and the ADS1286 manufacturer product page should be consulted before fixing the reference voltage, input range, and interface timing in a production design.
Where can I find the ADS1286PK pinout?
The ADS1286PK pinout is documented in the pin-configuration section of the official Texas Instruments ADS1286 datasheet. The exact signal assigned to each of the eight PDIP leads should be taken from that diagram rather than inferred from another ADS1286 package. Because the verified listing identifies the device as an 8-PDIP but does not reproduce the individual pin names, use the manufacturer pin-description table when assigning PCB connections.
Where can I buy ADS1286PK and check its current availability?
The ADS1286PK can be requested through the Request a Quote form on this page for current commercial availability, MOQ, and lead-time confirmation. The device is listed as an 8-PDIP, 12-bit, one-input SAR ADC from Texas Instruments. Because inventory and commercial terms can change quickly, the quote form provides the appropriate route for an exact-order and current lead-time check without relying on stale listing status.
What is the price of ADS1286PK?
Current ADS1286PK commercial pricing is handled through the Request a Quote form on this page. The form can be used to request the exact packaged MPN, quantity breaks, delivery information, and supply status. Engineers should avoid treating a historical or cached listing amount as a current quotation because component pricing and availability can change without notice.
What is the lead time for ADS1286PK?
The current ADS1286PK lead time should be requested through the Request a Quote form on this page using the exact 8-pin PDIP ordering code. Lead time can depend on manufacturer inventory, incoming supply, order quantity, and packaging configuration. The part's 12-bit resolution, 20 kHz sampling rate, and micropower operation are fixed device characteristics, while delivery timing is a commercial condition confirmed with each quotation.
Is ADS1286PK in stock?
ADS1286PK inventory status should be confirmed through the Request a Quote form on this page at the time of purchase. The official Texas Instruments product page and authorized distribution records identify the ADS1286 family and its ADS1286PK 8-PDIP ordering option, but a live stock quantity is not a permanent technical specification. Supply confirmation should include the requested quantity and intended shipment date.
What is the difference between ADS1286PK and ADS1286PB?
ADS1286PK and ADS1286PB are both Texas Instruments 12-bit ADS1286-family 20 kHz micropower sampling ADC order codes associated with the same 8-PDIP class. Their core function, differential input, approximately 250 µA supply current, and serial-interface architecture are therefore closely aligned. Exact order-code attributes such as temperature range, reel or tube configuration, or marking should still be compared on the manufacturer ordering table before substitution.
When should I choose ADS1286PK over another low-power ADC?
Choose ADS1286PK when the design needs a 12-bit, 20 kHz successive-approximation ADC with a differential input, integrated sample-and-hold amplifier, and approximately 250 µA typical supply current. Its SPI/SSI-compatible serial interface also helps reduce wiring in remote or compact systems. Select another converter instead when the application requires a higher sample rate, more channels, greater resolution, a different reference arrangement, or an accuracy level beyond the ADS1286 specifications.
Is ADS1286PK suitable for battery-powered sensor systems?
Yes, ADS1286PK is suitable for many battery-powered sensor systems because it is a micropower 12-bit converter with 20 kHz sampling and approximately 250 µA typical supply current. The differential input and integrated sample-and-hold amplifier are useful for low-level sensor signals, while the serial interface reduces external wiring. Battery life still depends on sampling duty cycle, sensor excitation, regulator quiescent current, and how frequently the host wakes to retrieve data.
What can replace ADS1286PK on an existing PCB?
ADS1286PB is the closest identified same-family candidate for an ADS1286PK replacement because both use the 8-PDIP class and implement the same 12-bit, 20 kHz ADS1286 converter architecture. A true drop-in substitution still requires verification of every pin, supply range, reference configuration, timing parameter, and ordering option. The candidate relationship was identified through web cross-reference material and should be checked against the manufacturer datasheet before production use.
What are the key specifications of ADS1286PK that engineers should know?
The principal ADS1286PK specifications are 12-bit resolution, a 20 kHz maximum sampling rate, one differential analog input, an integrated sample-and-hold amplifier, approximately 250 µA typical supply current, and an SPI/SSI-compatible two-wire or three-wire serial interface. The device is packaged as an 8-pin PDIP for through-hole assembly. These figures position it as a micropower acquisition converter for portable sensors, instrumentation, industrial monitoring, and remote data-logging designs.

נתוני עזר הנדסיים עבור ADS1286PK — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ADS1286PK when the application needs a 12-bit, 20 kHz successive-approximation ADC with a differential input, integrated sample-and-hold amplifier, micropower operation near 250 µA typical supply current, and a serial SPI- or SSI-compatible interface. It is particularly suitable for portable sensors, remote data loggers, low-level industrial monitoring, and compact measurement instruments. ADS1286PB is the closest identified same-package alternative because it belongs to the same ADS1286 family and 12-bit, 20 kHz converter class; confirm its complete ordering attributes and pin-level electrical details before substitution. Do not choose this converter when the design requires multiple simultaneous channels, substantially more than 20 kHz sampling, higher resolution, or a package and interface already established by another ADC. For those cases, a different converter may avoid firmware, analog-front-end, and PCB changes even if its basic function overlaps.

השוואה עם חלופות

פרמטר מוצר זה ADS1286PB
Brand Texas Instruments Texas Instruments
Package PDIP-8 PDIP-8
Resolution 12 bit 12 bit
Maximum Sampling Rate 20 kHz 20 kHz
Input Architecture Differential input Differential input

מבדילים עיקריים

  • Low-power differential acquisition in a single converter (לעומתADS1286PB)
  • Serial interface reduces PCB and cabling requirements (לעומתADS1286PB)
  • Differential input supports common-mode rejection (לעומתADS1286PB)

הערות תכנון

Route the differential input as a compact, balanced pair and keep it away from the serial clock and data traces. The input network and any protection components should be positioned close to the ADS1286PK so that switching and digital coupling are minimized before the integrated sample-and-hold amplifier acquires the signal. Use a continuous ground or reference-return path beneath the analog section and avoid routing return current through the sensitive input region.

Place the required bypass capacitors immediately across the ADS1286PK supply pins, with the shortest possible ground connection. The converter is specified at approximately 250 µA typical supply current, but measured board consumption will also include the reference source, interface pull devices, and external protection components. Check the reference-voltage source for startup, noise, and load behavior because its stability directly affects the digital conversion scale.

Do not substitute a candidate solely because it shares the 8-PDIP outline or the 12-bit resolution. Confirm pin-by-pin signal assignment, supply range, differential input limits, reference connection, serial timing, and temperature grade in the manufacturer documentation. A suitable PCB footprint is necessary but not sufficient for a drop-in decision, especially when replacing an ADC in a safety- or measurement-sensitive product.

Filter and source-impedance selection should be based on the acquisition bandwidth rather than the converter's maximum 20 kHz sample rate. Check the sensor impedance, external resistor network, input capacitance, and sample-and-hold settling requirements in the datasheet. For slow sensor signals, an RC filter may reduce high-frequency noise; for faster signals, excessive filtering can degrade settling and apparent accuracy.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified product information identifies the ADS1286PK as a general-purpose 12-bit micropower ADC in an 8-PDIP package but does not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status. AEC-Q100 is therefore treated as not applicable to the identified standard product rather than qualified.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADS1286PK datasheet ADS1286PK specifications ADS1286PK pinout ADS1286PK datasheet pdf ADS1286PK equivalent ADS1286PK replacement ADS1286PK vs ADS1286PB ADS1286PK price ADS1286PK stock Texas Instruments ADS1286PK ADS1286 12-bit 20kHz ADC ADS1286 PDIP-8 pinout

רכיבים ומונחים קשורים

Texas Instruments ADS1286PK ADS1286PB ADS1286 analog-to-digital converter ADC sampling ADC successive-approximation ADC SAR ADC differential input sample-and-hold amplifier SPI SSI 12-bit resolution 20 kHz sampling rate 250 µA supply current PDIP-8 through-hole package microcontroller DSP remote sensor industrial process measurement battery-powered instrument CMOS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר