ADS1286PK - 12-Bit Micropower SAR ADC | Texas Instruments
料号: ADS1286PK ✓ 量产中ADS1286PK 概述
An ADC is an interface component that converts an analog voltage into a digital number for processing by a microcontroller, DSP, logger, or measurement instrument. The ADS1286 belongs to the sampling ADC hierarchy, which includes sample-and-hold front ends, differential analog inputs, and serial-output converters. Its differential architecture is useful when the measurement must reject common-mode noise or when the source is balanced and centered around a reference level.
The ADS1286 provides 12-bit resolution, a maximum sampling rate of 20 kHz, and typical supply current of 250 µA. These characteristics make it suitable for low-power instrumentation where the converter must acquire sensor information while consuming little system energy. The serial interface is compatible with SPI and SSI protocols and supports communication over a two-wire or three-wire arrangement, allowing the device to operate with limited connector pins.
Internally, the ADS1286 combines a differential input, sampling circuitry, a 12-bit successive-approximation converter, and a serial interface in one package. The differential input is conditioned by the integrated sample-and-hold amplifier before conversion. Serial data output reduces the number of signal connections required, while the compact PDIP-8 package supports conventional through-hole PCB assembly and prototype rework. The exact reference-voltage, input-range, timing, and dynamic-performance details should be confirmed in the manufacturer datasheet before final circuit design.
Typical uses include portable environmental monitoring, remote sensing, industrial process measurement, low-power battery instrumentation, and small laboratory data loggers. A differential sensor such as a bridge, thermocouple interface, or current-sense element can feed the converter when its common-mode range and source impedance meet the device requirements. The 20 kHz sampling capability also permits measurement of slowly varying analog quantities without requiring a high-speed converter.
Power-supply and reference design remain central to achieving useful accuracy. Decoupling capacitors should be placed close to the supply pins, and analog and digital return currents should be routed without sharing narrow paths with the input signal. The input source impedance must be checked against the sampling network, while the reference voltage determines the conversion scale and must remain within its permitted operating range.
This page combines the manufacturer specifications, a structured pin-compatible substitute review, comparison parameters, application guidance, and practical layout considerations for engineers evaluating the ADS1286PK. The supporting information distinguishes confirmed device characteristics from parameters that still require datasheet confirmation during component selection and circuit sign-off.
直接替换替代料: ADS1286PK ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ADS1286PB
✅ 直接替换📋 参考替代料(不在目录中)
ADS1286PK 最大额定值与电气特性
| Converter Type | Successive-approximation sampling ADC |
| 分辨率 | 12 bit |
| Maximum Sampling Rate | 20 kHz |
| Number of Analog Input Channels | 1 channel |
| Input Architecture | Differential input |
| Sample-and-Hold Amplifier | Integrated |
| 电源电流 | 250 µA typical |
| 电源电压 | 4.5 V typical |
| Digital Interface | SPI and SSI compatible |
| Serial Interface Configuration | 2-wire or 3-wire |
| 工作温度范围 | -40 °C to +85 °C |
| 封装 | 8-pin PDIP |
| 安装类型 | Through-hole |
| Process Technology | CMOS |
ADS1286PK 8-pin pdip 引脚配置指南
ADS1286PK(8-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS1286PK.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS1286PK 适用于 6 应用s: Battery-Powered Environmental Sensors, Industrial Process Measurement, Remote Data Logging, Portable Medical Instruments, Portable Test and Measurement, Low-Level Signal Monitoring.
Battery-Powered Environmental Sensors
The ADS1286PK fits battery-powered environmental monitoring when temperature, humidity, gas, or soil sensors produce a low-level analog signal. Its 12-bit resolution provides 4096 code levels across the selected input range, while the differential input can help reject common-mode disturbance when the sensor output is balanced around a reference or mid-supply node. The converter samples at up to 20 kHz and typically consumes 250 µA, allowing the host to wake, acquire a reading, and return to sleep without running a continuously powered high-speed converter. The integrated sample-and-hold amplifier simplifies the front end, and the SPI- or SSI-compatible interface reduces the number of connections to a remote sensor assembly.
Industrial Process Measurement
The ADS1286PK is appropriate for slow industrial process signals that require deterministic conversion without the power and complexity of a high-speed ADC. A 20 kHz maximum sampling rate is more than adequate for many temperature, pressure, level, and current measurements, while 12-bit resolution supports moderately precise digital readings. The differential input is valuable when the transducer and cable introduce common-mode noise or when the measured quantity appears as the difference between two nodes. The 250 µA typical operating current also supports distributed acquisition nodes. For each transducer, however, the engineer should verify the input range, source impedance, reference stability, and sensor excitation scheme against the manufacturer datasheet.
Remote Data Logging
The ADS1286PK supports compact remote data loggers that must acquire analog measurements while consuming limited power. Its micropower 250 µA typical supply current and 12-bit successive-approximation conversion are suited to duty-cycled acquisition, while the two-wire or three-wire serial interface can reduce connector requirements in weather-resistant field nodes. A differential sensor connection can preserve signal integrity over cables by reducing the effect of shared interference. The 20 kHz capability also allows a node to capture events or waveforms substantially faster than a conventional low-rate data logger. Designers should still budget for reference accuracy, input filtering, surge protection, and the host's sleep and wake characteristics to determine true system-level power consumption.
Portable Medical Instruments
The ADS1286PK can be evaluated for portable, low-power medical measurement modules that monitor a single low-level analog parameter. Its differential input is useful for sensing bridge-like or differentially balanced signals, and the integrated sample-and-hold amplifier reduces the number of external active components required before conversion. The 12-bit resolution and 20 kHz sampling rate are appropriate for many physiological or diagnostic signals that do not require high-bandwidth conversion, while typical supply current of 250 µA supports energy-conscious operation. Medical use nevertheless requires a full system-level risk assessment, including isolation, patient protection, input limits, accuracy, noise behavior, and applicable regulatory requirements; the ADC package alone does not establish medical certification.
Portable Test and Measurement
The ADS1286PK fits a portable handheld meter that measures a selectable analog channel and presents the converted value on a small display or sends it to a controller. Its 20 kHz maximum sampling rate permits responsive measurements and short acquisition windows, while 12-bit resolution provides a practical balance between information content, conversion time, and micropower operation. The serial interface reduces the pin count needed for the converter, leaving more interface capacity for the display, controls, and communications. Differential sensing can improve performance in instruments that measure across two input terminals rather than from a single ground-referenced source. The instrument designer should confirm input bandwidth, settling behavior, reference accuracy, and front-end protection before setting the measurement bandwidth.
Low-Level Signal Monitoring
The ADS1286PK is suitable for low-level signal monitoring where a differential analog quantity must be digitized with low system power. The integrated sample-and-hold amplifier and differential input provide a compact acquisition channel, and the 12-bit successive-approximation architecture supports measurements sampled at up to 20 kHz. In a condition-monitoring system, the converter can digitize a transducer output while a microcontroller evaluates thresholds or stores the result. Typical consumption of 250 µA is useful when many channels must be powered intermittently or when the instrument operates from a small energy source. Practical accuracy depends on the selected reference, analog front end, input bandwidth, grounding, and filtering, so those elements should be evaluated as part of the complete measurement chain rather than relying on conversion resolution alone.
工程参考数据: ADS1286PK ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADS1286PB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | PDIP-8 | PDIP-8 |
| Resolution | 12 bit | 12 bit |
| Maximum Sampling Rate | 20 kHz | 20 kHz |
| Input Architecture | Differential input | Differential input |
关键差异点
- Low-power differential acquisition in a single converter (对比 ADS1286PB)
- Serial interface reduces PCB and cabling requirements (对比 ADS1286PB)
- Differential input supports common-mode rejection (对比 ADS1286PB)
设计说明
Route the differential input as a compact, balanced pair and keep it away from the serial clock and data traces. The input network and any protection components should be positioned close to the ADS1286PK so that switching and digital coupling are minimized before the integrated sample-and-hold amplifier acquires the signal. Use a continuous ground or reference-return path beneath the analog section and avoid routing return current through the sensitive input region.
Place the required bypass capacitors immediately across the ADS1286PK supply pins, with the shortest possible ground connection. The converter is specified at approximately 250 µA typical supply current, but measured board consumption will also include the reference source, interface pull devices, and external protection components. Check the reference-voltage source for startup, noise, and load behavior because its stability directly affects the digital conversion scale.
Do not substitute a candidate solely because it shares the 8-PDIP outline or the 12-bit resolution. Confirm pin-by-pin signal assignment, supply range, differential input limits, reference connection, serial timing, and temperature grade in the manufacturer documentation. A suitable PCB footprint is necessary but not sufficient for a drop-in decision, especially when replacing an ADC in a safety- or measurement-sensitive product.
Filter and source-impedance selection should be based on the acquisition bandwidth rather than the converter's maximum 20 kHz sample rate. Check the sensor impedance, external resistor network, input capacitance, and sample-and-hold settling requirements in the datasheet. For slow sensor signals, an RC filter may reduce high-frequency noise; for faster signals, excessive filtering can degrade settling and apparent accuracy.
合规信息
The verified product information identifies the ADS1286PK as a general-purpose 12-bit micropower ADC in an 8-PDIP package but does not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status. AEC-Q100 is therefore treated as not applicable to the identified standard product rather than qualified.