Texas Instruments

ADS774KU/1K - 12-Bit 125 kSPS SAR ADC | Texas Instruments

MPN: ADS774KU/1K ✓ פעיל
+5 V single supply Vdss 28-pin SOIC (DW) Package
כמות הזמנה מינימלית: 1 |

ADS774KU/1K סקירה

Texas Instruments ADS774KU/1K is a 12-bit, single-channel successive-approximation analog-to-digital converter with a maximum sampling rate of 125 kSPS, an 8.5 µs maximum acquisition-and-conversion time, and a 28-pin SOIC package. It integrates the sampling function, reference, clock, and microprocessor interface into a single converter designed for precision signal-acquisition systems.

A successive-approximation ADC, or SAR ADC, converts an analog input voltage into a digital code by successively testing internal capacitor-array thresholds. The ADS774 belongs to the ADC category within the broader analog-to-digital converter hierarchy and uses a low-power CMOS charge-balancing DAC and capacitor array. Its internal sampling architecture eliminates the external sample-and-hold stage required by many older converter families.

Key features include 12-bit resolution, one analog input channel, parallel microprocessor interfacing, a 125 kSPS maximum throughput rate, and operation from a single +5 V supply. The manufacturer describes the device as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Its integrated reference, clock, and interface reduce the component count and board area required to modernize these established converter designs.

The converter uses a low-power CMOS capacitor-array DAC and a successive-approximation conversion process. The stated 8.5 µs maximum acquisition-and-conversion time over temperature supports acquisition rates up to 125 kSPS, while the internal sampling function supports acquisition of the analog input without a discrete sample-and-hold circuit. The parallel interface provides a straightforward connection to microprocessor and digital logic systems.

Typical applications include industrial process-control instrumentation, data-acquisition systems, test and measurement equipment, embedded control, and legacy ADC574, ADC674, or ADC774 designs. The 28-pin SOIC package also makes the ADS774KU/1K suitable for PCB modernization programs that require a surface-mount replacement while retaining familiar pin-compatible system architecture.

When implementing the converter, preserve the supply and reference requirements specified by the manufacturer datasheet and route the parallel data bus with suitable timing margin. Input-source impedance and acquisition time should be evaluated together because the sampling network must charge adequately during the available 8.5 µs conversion period. The analog input should also be placed to minimize coupling from fast digital switching signals.

This page combines the manufacturer datasheet details, package and temperature information, ordering options, drop-in compatibility considerations, and practical implementation guidance. It is designed to help engineers evaluate the ADS774KU/1K for new precision-converter designs and for controlled replacement of compatible legacy ADC assemblies.

חלופות תחליף ישיר עבור ADS774KU/1K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADS774JU/1K

✅ Drop-In
Texas Instruments
📦 28-pin SOIC (DW)
12 bit · 117 kSPS · 1 channel · Successive approximation (SAR) · Sampling CMOS ADC · +5 V · 120 mW · 8.5 us over temperature

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ADS774HIBDWR

✅ Drop-In
📦 28-pin SOIC (DW)
Listed sampling rate is 117 kHz versus 125 kSPS, a 6.4% reduction; ordering and qualification details differ

📋 חלופה להתייחסות (לא בקטלוג)

ADS774KU/1K דירוגים מרביים ומאפיינים חשמליים

רזולוציה 12 bit
Analog Input Channels 1 channel
Architecture Successive approximation (SAR)
קצב דגימה 125 kSPS
Acquisition and Conversion Time 8.5 µs maximum over temperature
Output Interface Parallel microprocessor-compatible interface
Converter Technology Low-power CMOS
Internal DAC Architecture Capacitor array (CDAC)
מתח אספקה +5 V single supply
Integrated Functions Internal sampling, reference, clock, and microprocessor interface
External Sample-and-Hold Requirement Eliminated in most applications
מארז 28-pin SOIC (DW)
סוג הרכבה Surface mount
Temperature Grade Industrial
טווח טמפרטורת פעולה -40 °C to +85 °C
Legacy Compatibility Drop-in replacement for ADC574, ADC674, and ADC774 models in most applications

מדריך תצורת פינים של ADS774KU/1K 28-pin soic (dw)

תצורת פינים עבור ADS774KU/1K (מארזת 28-pin soic (dw)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-pin soic (dw) עבור ADS774KU/1K

אין נתוני פריסת פינים מפורטים עבור ADS774KU/1K.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADS774KU/1K מתאים עבור 6 יישוםs: Industrial Process-Control Instrumentation, Automated Test and Measurement Equipment, Legacy ADC574 and ADC774 Board Modernization, Embedded Control and Sensor Acquisition, Data Acquisition and Monitoring Systems, Precision Analog Signal Conditioning Systems.

🏭

Industrial Process-Control Instrumentation

The ADS774KU/1K is well suited to industrial process-control systems that require repeated conversion of slowly changing sensor signals under a -40 °C to +85 °C environment. Its 12-bit resolution provides 4096 digital codes, while the 125 kSPS maximum rate and 8.5 µs maximum acquisition-and-conversion time support rapid updates. The internal sampling, reference, clock, and microprocessor interface reduce external circuitry. Place the analog input close to the converter, provide the required reference bypassing, and isolate it from switching-node and parallel-bus coupling so that process readings remain stable during repeated sampling.

🔧

Automated Test and Measurement Equipment

The ADS774KU/1K can serve as the acquisition front end in automated instrumentation that measures slowly varying analog levels and converts them for a digital controller. Its 125 kSPS throughput allows rapid settling between measurements, while the single +5 V supply simplifies system power planning. The integrated reference, clock, and sampling network reduce board area compared with modular converter assemblies. Engineers should budget acquisition time around the 8.5 µs maximum conversion figure, verify the source impedance against the sampling network, and use a quiet analog ground and reference layout to prevent digital-interface activity from corrupting measurements.

🖥️

Legacy ADC574 and ADC774 Board Modernization

The ADS774KU/1K is specifically identified by Texas Instruments as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, making it a practical option for modernizing older 12-bit acquisition boards. Its integrated sampling function eliminates the external sample-and-hold stage in many designs, and its low-power CMOS implementation reduces the component count. Although the 28-pin SOIC package supports a controlled redesign, engineers must verify signal polarity, logic thresholds, pin functions, clocking behavior, and supply sequencing against the original assembly before production conversion.

🧩

Embedded Control and Sensor Acquisition

The ADS774KU/1K fits embedded control systems that acquire one analog sensor channel and present the result to a microprocessor or parallel logic interface. Its 125 kSPS maximum sampling rate is more than sufficient for many temperature, pressure, and position sensors, while the internal sampling and reference functions simplify the analog front end. The 12-bit result supports useful control resolution without requiring a complex serial interface. Design the input path so the ADC sampling network settles within the available acquisition period, keep sensor returns away from digital clock traces, and account for reference accuracy when translating sensor voltages into control commands.

📈

Data Acquisition and Monitoring Systems

In a compact data-acquisition or monitoring system, the ADS774KU/1K provides a straightforward 12-bit parallel conversion channel with a 125 kSPS maximum throughput. The integrated clock and reference make it useful for standalone monitoring modules that must report analog levels to digital logic without a complex converter subsystem. Its single +5 V operation simplifies rail planning, while the industrial temperature range supports demanding equipment environments. To maximize repeatability, connect the analog return to a carefully managed ground reference, decouple the supply near the device, and maintain controlled parallel-bus timing during data capture.

📡

Precision Analog Signal Conditioning Systems

The ADS774KU/1K can serve as the final digitization stage in analog signal-conditioning equipment where a conditioned voltage must be converted into a parallel digital value. Its 12-bit resolution and 125 kSPS maximum sampling rate suit continuous monitoring of bounded analog signals, and the internal sampling arrangement eliminates a separate sample-and-hold package in most applications. Signal-chain designers should select an input amplifier with adequate drive capability, filter out-of-band noise before the ADC, and reference the analog ground carefully. Confirm the accepted input range and reference accuracy in the manufacturer datasheet before setting gain and scaling.

What are the key specifications of ADS774KU/1K that engineers should know?
The ADS774KU/1K is a 12-bit, single-channel SAR ADC rated for 125 kSPS in a 28-pin SOIC package. According to the Texas Instruments ADS774 datasheet, it integrates sampling, a reference, a clock, and a microprocessor interface, operates from a single +5 V supply, and provides an 8.5 µs maximum acquisition-and-conversion time over temperature. The industrial-temperature option covers -40 °C to +85 °C.
Where can I download the ADS774KU/1K datasheet PDF?
The official ADS774KU/1K datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads774.pdf. The manufacturer document describes the 12-bit CMOS SAR architecture, internal sampling, reference, clock, parallel interface, electrical characteristics, pin configuration, and application information. Use the TI product page for ordering options and current lifecycle information.
Where can I find the ADS774KU/1K pinout and package information?
The ADS774KU/1K uses a 28-pin SOIC package identified as DW by Texas Instruments. Its complete pin numbers, signal names, and descriptions are contained in the pin-configuration section of the manufacturer ADS774 datasheet. Because the individual pin table is not reproduced in the product listing, use the datasheet pin-description table when assigning every PCB track and handling the parallel data bus.
Can ADS774JU/1K replace an ADS774KU/1K?
The ADS774JU/1K can serve as a pin-compatible alternative to the ADS774KU/1K because both are 12-bit SAR converters in 28-pin SOIC packages. The ADS774JU is commonly identified at 117 kHz while the ADS774KU is identified at 125 kSPS, making the published sampling-rate difference about 6.4%. Confirm the ordering temperature and screening details against the manufacturer datasheet before production use.
What is the best drop-in replacement for ADS774KU/1K?
The ADS774JU/1K is the closest documented same-footprint alternative because it is a pin-compatible 12-bit SAR ADC in a 28-pin SOIC package. Its listed conversion rate is 117 kHz versus 125 kSPS for the ADS774KU/1K, a reduction of approximately 6.4%. No complete cross-brand replacement list was established, so verify timing, analog performance, temperature grade, and sourcing requirements before substitution.
Is ADS774KU/1K the same as ADS774JU/1K?
The ADS774KU/1K and ADS774JU/1K are closely related 28-pin SOIC versions of the TI ADS774 converter, but they are not identical ordering codes. The published sampling rates differ: 125 kSPS for ADS774KU and 117 kHz for ADS774JU, approximately a 6.4% reduction. TI also discusses screening distinctions between the variants, so confirm the exact grade and operating limits before treating them as interchangeable.
When should I choose ADS774KU/1K over ADS774JU/1K?
Choose the ADS774KU/1K when the design benefits from its listed 125 kSPS maximum sampling rate, while the ADS774JU/1K is identified at 117 kHz. Both use the same 28-pin SOIC footprint and provide a 12-bit SAR conversion function. The ADS774KU/1K is therefore preferable when acquisition timing requires the higher published throughput or when its exact TI screening and temperature grade match the system requirements.
Is ADS774KU/1K suitable for industrial data-acquisition systems?
The ADS774KU/1K is suitable for industrial data-acquisition systems that can operate from a single +5 V supply and need a 12-bit SAR converter with a parallel interface. Its industrial temperature range is -40 °C to +85 °C, and the manufacturer specifies an 8.5 µs maximum acquisition-and-conversion time. The design must also provide suitable input settling and reference-decoupling arrangements.
Where can I buy ADS774KU/1K online and what is its current lead time?
Use the “Request a Quote” form on this page to request the current ADS774KU/1K unit availability, quantity breaks, and lead time. The manufacturer identifies the part as a 28-pin SOIC device with an industrial temperature range of -40 °C to +85 °C. The listing confirms the ordering code but does not establish a current factory lead-time commitment or guaranteed stock position.
What is the price of ADS774KU/1K?
Current ADS774KU/1K pricing depends on quantity, condition, and supply availability, so use the “Request a Quote” form on this page for the actionable commercial offer. The device is cataloged by Texas Instruments as a 12-bit, 125 kSPS, single-input SAR ADC in a 28-pin SOIC package. Quote requests should specify the required quantity, shipping destination, and acceptable production schedule.
Is ADS774KU/1K in stock?
Do not treat catalog visibility as a guaranteed inventory commitment; request a quote for the current ADS774KU/1K stock position using the “Request a Quote” form on this page. The exact ordering code is ADS774KU/1K, and Texas Instruments identifies it as an industrial-temperature 28-pin SOIC converter. The form lets purchasing confirm quantity availability and delivery timing against the current supply chain.
ADS774KU/1K vs ADS774JU/1K: which is better for a legacy ADC interface?
The ADS774KU/1K is the better choice when the legacy interface requires the higher listed 125 kSPS acquisition rate, while the ADS774JU/1K is listed at 117 kHz. Both are 12-bit SAR ADCs in the same 28-pin SOIC footprint, making each plausible in a controlled replacement. The decision should also account for timing margin, temperature grade, and exact pin-level validation.
What are the differences between ADS774KU/1K and ADS774HIBDWR?
The ADS774KU/1K and ADS774HIBDWR are both presented as 28-pin SOIC, 12-bit SAR converter options, but their ordering and screening details differ. A distributor comparison identifies ADS774KU at 125 kSPS and ADS774HIBDWR at 117 kHz, an approximately 6.4% sampling-rate reduction for the latter. Review the exact pinout, grade, and production qualification before using either device in a new design.
What is the best Texas Instruments equivalent for ADS774KU/1K?
The closest Texas Instruments equivalent identified for ADS774KU/1K is ADS774JU/1K, a 12-bit SAR converter in the same 28-pin SOIC package with a listed 117 kHz conversion rate compared with 125 kSPS for the target. The approximately 6.4% throughput difference is within the drop-in comparison threshold. Confirm analog accuracy, temperature grade, and interface timing in the manufacturer documentation.
How does the ADS774KU/1K simplify an ADC574 or ADC774 replacement design?
The ADS774KU/1K integrates sampling, the reference, clock, and microprocessor interface into one low-power CMOS converter, while eliminating the external sample-and-hold requirement in most applications. The Texas Instruments ADS774 datasheet describes it as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Board engineers should still verify signal polarity, logic levels, timing, and decoupling at the pin level.

נתוני עזר הנדסיים עבור ADS774KU/1K — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADS774KU/1K for a new 12-bit, parallel-interface SAR converter design that benefits from its listed 125 kSPS throughput, integrated sampling and reference, and -40 °C to +85 °C industrial temperature range. It is especially appropriate for controlled modernization of ADC574, ADC674, and ADC774 assemblies after pin, timing, and signal-polarity checks. The ADS774JU/1K is the closest documented alternative when the same 28-pin SOIC footprint is needed and 117 kHz provides adequate acquisition margin. The ADS774HIBDWR may suit qualification requirements not applicable to the standard ordering code, but its lower listed rate must be included in timing calculations. No cross-brand drop-in alternative was established, so use the TI options only after checking the complete manufacturer pinout, electrical characteristics, lifecycle status, and production availability.

השוואה עם חלופות

פרמטר מוצר זה ADS774JU/1K ADS774HIBDWR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SOIC (DW) 28-pin SOIC 28-pin SOIC
Resolution 12 bit 12 bit 12 bit
Architecture Successive approximation SAR Successive approximation SAR Successive approximation SAR
Sampling Rate 125 kSPS 117 kHz 117 kHz
Analog Input Channels 1 channel 1 channel 1 channel
Process Technology Low-power CMOS CMOS CMOS

מבדילים עיקריים

  • Higher listed sampling rate (לעומתADS774JU/1K)
  • Higher listed sampling rate (לעומתADS774HIBDWR)
  • Integrated complete-converter functions (לעומתADS774JU/1K)

הערות תכנון

Do not assume that every 12-bit, 28-pin ADS774 ordering code is a drop-in substitute without checking the exact pin table and conversion timing. The ADS774JU/1K is listed at 117 kHz compared with 125 kSPS for the ADS774KU/1K, a difference of approximately 6.4%. Confirm the replacement can meet the acquisition deadline, operates from the same supply, uses compatible logic levels, and provides the required temperature grade before releasing a production drawing.

Route the analog input directly to the converter and keep it away from the 12-bit parallel bus, clock signals, and nearby switching nodes. The internal sampling network must charge to the correct input voltage during the available acquisition interval; excessive source impedance or trace capacitance can increase settling error. Use a short return path, maintain a continuous reference plane beneath the analog section, and place input and bypass components close to their associated pins.

Treat the parallel data bus as a multi-bit switching interface rather than eight isolated signals. Account for output timing, propagation delay, and receiver setup requirements in the connected digital logic. Keep the bus traces short where possible, provide a nearby ground reference, and avoid routing data traces beneath the analog input or reference nodes. If the system clock or bus changes rapidly, verify that switching activity does not degrade the converter input during acquisition.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The industrial-temperature ADS774KU/1K is not identified as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited product and distributor information.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADS774KU/1K datasheet ADS774KU/1K pinout ADS774KU/1K datasheet pdf ADS774KU/1K specifications ADS774KU/1K 28 pin SOIC ADS774KU/1K 125 kSPS ADS774KU/1K equivalent ADS774KU/1K replacement ADS774KU/1K vs ADS774JU/1K Texas Instruments ADS774KU/1K ADS774KU/1K price ADS774KU/1K stock

רכיבים ומונחים קשורים

Texas Instruments ADS774KU/1K ADS774JU/1K ADS774HIBDWR ADS774 ADC574 ADC674 ADC774 Analog-to-digital converter ADC Successive-approximation ADC SAR ADC CMOS Capacitor-array DAC CDAC 12-bit resolution 125 kSPS 8.5 µs conversion time Parallel microprocessor interface Single +5 V supply Internal reference Internal clock Internal sample-and-hold 28-pin SOIC Industrial temperature grade RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר