ADS774KU/1K - 12-Bit 125 kSPS SAR ADC | Texas Instruments
N.º da peça: ADS774KU/1K ✓ AtivoADS774KU/1K Visão geral
A successive-approximation ADC, or SAR ADC, converts an analog input voltage into a digital code by successively testing internal capacitor-array thresholds. The ADS774 belongs to the ADC category within the broader analog-to-digital converter hierarchy and uses a low-power CMOS charge-balancing DAC and capacitor array. Its internal sampling architecture eliminates the external sample-and-hold stage required by many older converter families.
Key features include 12-bit resolution, one analog input channel, parallel microprocessor interfacing, a 125 kSPS maximum throughput rate, and operation from a single +5 V supply. The manufacturer describes the device as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Its integrated reference, clock, and interface reduce the component count and board area required to modernize these established converter designs.
The converter uses a low-power CMOS capacitor-array DAC and a successive-approximation conversion process. The stated 8.5 µs maximum acquisition-and-conversion time over temperature supports acquisition rates up to 125 kSPS, while the internal sampling function supports acquisition of the analog input without a discrete sample-and-hold circuit. The parallel interface provides a straightforward connection to microprocessor and digital logic systems.
Typical applications include industrial process-control instrumentation, data-acquisition systems, test and measurement equipment, embedded control, and legacy ADC574, ADC674, or ADC774 designs. The 28-pin SOIC package also makes the ADS774KU/1K suitable for PCB modernization programs that require a surface-mount replacement while retaining familiar pin-compatible system architecture.
When implementing the converter, preserve the supply and reference requirements specified by the manufacturer datasheet and route the parallel data bus with suitable timing margin. Input-source impedance and acquisition time should be evaluated together because the sampling network must charge adequately during the available 8.5 µs conversion period. The analog input should also be placed to minimize coupling from fast digital switching signals.
This page combines the manufacturer datasheet details, package and temperature information, ordering options, drop-in compatibility considerations, and practical implementation guidance. It is designed to help engineers evaluate the ADS774KU/1K for new precision-converter designs and for controlled replacement of compatible legacy ADC assemblies.
Alternativas drop-in para ADS774KU/1K — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ADS774JU/1K
✅ Drop-InConsulte o preço
Ver ficha técnica →ADS774HIBDWR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADS774KU/1K Classificações máximas e características elétricas
| Resolução | 12 bit |
| Analog Input Channels | 1 channel |
| Architecture | Successive approximation (SAR) |
| Taxa de amostragem | 125 kSPS |
| Acquisition and Conversion Time | 8.5 µs maximum over temperature |
| Output Interface | Parallel microprocessor-compatible interface |
| Converter Technology | Low-power CMOS |
| Internal DAC Architecture | Capacitor array (CDAC) |
| Tensão de alimentação | +5 V single supply |
| Integrated Functions | Internal sampling, reference, clock, and microprocessor interface |
| External Sample-and-Hold Requirement | Eliminated in most applications |
| Encapsulamento | 28-pin SOIC (DW) |
| Tipo de montagem | Surface mount |
| Temperature Grade | Industrial |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| Legacy Compatibility | Drop-in replacement for ADC574, ADC674, and ADC774 models in most applications |
Guia de Configuração de Pinos do ADS774KU/1K 28-pin soic (dw)
Configuração de pinos para ADS774KU/1K (pacote 28-pin soic (dw)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para ADS774KU/1K.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADS774KU/1K é adequado para 6 aplicaçãos: Industrial Process-Control Instrumentation, Automated Test and Measurement Equipment, Legacy ADC574 and ADC774 Board Modernization, Embedded Control and Sensor Acquisition, Data Acquisition and Monitoring Systems, Precision Analog Signal Conditioning Systems.
Industrial Process-Control Instrumentation
The ADS774KU/1K is well suited to industrial process-control systems that require repeated conversion of slowly changing sensor signals under a -40 °C to +85 °C environment. Its 12-bit resolution provides 4096 digital codes, while the 125 kSPS maximum rate and 8.5 µs maximum acquisition-and-conversion time support rapid updates. The internal sampling, reference, clock, and microprocessor interface reduce external circuitry. Place the analog input close to the converter, provide the required reference bypassing, and isolate it from switching-node and parallel-bus coupling so that process readings remain stable during repeated sampling.
Recomendado
Automated Test and Measurement Equipment
The ADS774KU/1K can serve as the acquisition front end in automated instrumentation that measures slowly varying analog levels and converts them for a digital controller. Its 125 kSPS throughput allows rapid settling between measurements, while the single +5 V supply simplifies system power planning. The integrated reference, clock, and sampling network reduce board area compared with modular converter assemblies. Engineers should budget acquisition time around the 8.5 µs maximum conversion figure, verify the source impedance against the sampling network, and use a quiet analog ground and reference layout to prevent digital-interface activity from corrupting measurements.
Recomendado
Legacy ADC574 and ADC774 Board Modernization
The ADS774KU/1K is specifically identified by Texas Instruments as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, making it a practical option for modernizing older 12-bit acquisition boards. Its integrated sampling function eliminates the external sample-and-hold stage in many designs, and its low-power CMOS implementation reduces the component count. Although the 28-pin SOIC package supports a controlled redesign, engineers must verify signal polarity, logic thresholds, pin functions, clocking behavior, and supply sequencing against the original assembly before production conversion.
Recomendado
Embedded Control and Sensor Acquisition
The ADS774KU/1K fits embedded control systems that acquire one analog sensor channel and present the result to a microprocessor or parallel logic interface. Its 125 kSPS maximum sampling rate is more than sufficient for many temperature, pressure, and position sensors, while the internal sampling and reference functions simplify the analog front end. The 12-bit result supports useful control resolution without requiring a complex serial interface. Design the input path so the ADC sampling network settles within the available acquisition period, keep sensor returns away from digital clock traces, and account for reference accuracy when translating sensor voltages into control commands.
Recomendado
Data Acquisition and Monitoring Systems
In a compact data-acquisition or monitoring system, the ADS774KU/1K provides a straightforward 12-bit parallel conversion channel with a 125 kSPS maximum throughput. The integrated clock and reference make it useful for standalone monitoring modules that must report analog levels to digital logic without a complex converter subsystem. Its single +5 V operation simplifies rail planning, while the industrial temperature range supports demanding equipment environments. To maximize repeatability, connect the analog return to a carefully managed ground reference, decouple the supply near the device, and maintain controlled parallel-bus timing during data capture.
Recomendado
Precision Analog Signal Conditioning Systems
The ADS774KU/1K can serve as the final digitization stage in analog signal-conditioning equipment where a conditioned voltage must be converted into a parallel digital value. Its 12-bit resolution and 125 kSPS maximum sampling rate suit continuous monitoring of bounded analog signals, and the internal sampling arrangement eliminates a separate sample-and-hold package in most applications. Signal-chain designers should select an input amplifier with adequate drive capability, filter out-of-band noise before the ADC, and reference the analog ground carefully. Confirm the accepted input range and reference accuracy in the manufacturer datasheet before setting gain and scaling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADS774KU/1K — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADS774JU/1K | ADS774HIBDWR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC (DW) | 28-pin SOIC | 28-pin SOIC |
| Resolution | 12 bit | 12 bit | 12 bit |
| Architecture | Successive approximation SAR | Successive approximation SAR | Successive approximation SAR |
| Sampling Rate | 125 kSPS | 117 kHz | 117 kHz |
| Analog Input Channels | 1 channel | 1 channel | 1 channel |
| Process Technology | Low-power CMOS | CMOS | CMOS |
Principais diferenciais
- Higher listed sampling rate (vs ADS774JU/1K)
- Higher listed sampling rate (vs ADS774HIBDWR)
- Integrated complete-converter functions (vs ADS774JU/1K)
Notas de projeto
Do not assume that every 12-bit, 28-pin ADS774 ordering code is a drop-in substitute without checking the exact pin table and conversion timing. The ADS774JU/1K is listed at 117 kHz compared with 125 kSPS for the ADS774KU/1K, a difference of approximately 6.4%. Confirm the replacement can meet the acquisition deadline, operates from the same supply, uses compatible logic levels, and provides the required temperature grade before releasing a production drawing.
Route the analog input directly to the converter and keep it away from the 12-bit parallel bus, clock signals, and nearby switching nodes. The internal sampling network must charge to the correct input voltage during the available acquisition interval; excessive source impedance or trace capacitance can increase settling error. Use a short return path, maintain a continuous reference plane beneath the analog section, and place input and bypass components close to their associated pins.
Treat the parallel data bus as a multi-bit switching interface rather than eight isolated signals. Account for output timing, propagation delay, and receiver setup requirements in the connected digital logic. Keep the bus traces short where possible, provide a nearby ground reference, and avoid routing data traces beneath the analog input or reference nodes. If the system clock or bus changes rapidly, verify that switching activity does not degrade the converter input during acquisition.
Informações de conformidade
The industrial-temperature ADS774KU/1K is not identified as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited product and distributor information.