Texas Instruments

ADS800E/1K - 12-Bit 40 MSPS ADC | Texas Instruments

MPN: ADS800E/1K ✗ סוף ייצור
5 V nominal Vdss 28-pin SSOP Package
כמות הזמנה מינימלית: 1 |

ADS800E/1K סקירה

Texas Instruments ADS800E/1K is a 12-bit, single-channel, 40 MSPS analog-to-digital converter with a parallel digital interface, supplied in a 28-pin SSOP package. It is designed for signal-conversion systems that require moderate resolution and high sampling throughput, including industrial instrumentation, communications receivers, data-acquisition equipment, and embedded control systems. The device supports single-ended or differential analog input arrangements and operates from a nominal 5 V supply.

An ADC is a data-acquisition semiconductor that converts an analog voltage into a numeric code for processing by a microcontroller, DSP, FPGA, or computer. The ADS800 belongs to the parallel-output ADC family within the broader ADC and data-converter hierarchy. Its 12-bit resolution provides 4,096 quantization levels, while its 40 MSPS conversion rate supports acquisition of substantially more samples than a conventional low-speed instrumentation ADC.

Key characteristics include 12-bit resolution, a maximum sampling rate of 40 MSPS, one analog input, parallel data output, a 28-pin SSOP package, and an industrial operating-temperature range of -40 °C to 85 °C. The parallel interface simplifies connection to suitably buffered digital logic and avoids the serial-link overhead associated with lower-rate converters. Its nominal 5 V supply also facilitates use in conventional industrial analog systems.

The ADS800E uses a pipelined conversion architecture, combining an internal reference with multiple functional stages to perform analog-to-digital conversion at 40 MSPS. A single-channel architecture makes it appropriate when the system does not require simultaneous sampling of multiple inputs. External multiplexing can extend the channel count, although settling time and acquisition-circuit requirements must then be evaluated for each multiplexed input.

Typical applications include communications-channel digitizers, industrial process monitoring, laboratory measurement systems, ultrasound and medical instrumentation interfaces, and digital feedback control loops. In each case, the 40 MSPS rate suits rapidly changing signals, while the 12-bit result supports thresholding, waveform analysis, envelope measurement, and supervisory control.

PCB design should provide a low-impedance analog input path, stable reference and supply bypassing, and careful routing of the 12-bit parallel bus. Use the manufacturer pin-description table when assigning tracks, and verify board-level timing against the clock and data-valid requirements in the datasheet. Because this converter is listed as obsolete, new designs should confirm lifecycle status and obtain an appropriate sourcing plan before committing the part to a production BOM.

This page consolidates the core electrical characteristics, lifecycle position, package information, cross-family upgrade paths, and engineering guidance for engineers evaluating the ADS800E/1K. It also distinguishes true pin-compatible options from merely similar converters so replacement decisions are based on resolution, throughput, interface, and thermal requirements.

חלופות תחליף ישיר עבור ADS800E/1K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADS800/1K

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same 12-bit, 40 MSPS parallel ADC family and 28-pin SSOP footprint; the ADS800E/1K extends the operating range to -40 °C to 85 °C versus the commercial-grade temperature range of the ADS800/1K.

📋 חלופה להתייחסות (לא בקטלוג)

ADS800U/1K

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same 12-bit, 40 MSPS parallel conversion and 28-pin SSOP footprint; ordering-code temperature grade differs, making this a packaging and temperature-grade alternative within the ADS800 family.

📋 חלופה להתייחסות (לא בקטלוג)

ADS801/1K

✅ Drop-In
📦 28-pin SSOP
Documented as pin compatible with ADS800E/1K; retains 12-bit parallel conversion while increasing the sampling capability to 80 MSPS, a 100% increase over 40 MSPS.

📋 חלופה להתייחסות (לא בקטלוג)

ADS802/1K

✅ Drop-In
📦 28-pin SSOP
Documented as pin compatible with ADS800E/1K and retains a 40 MSPS rate; increases resolution from 12 bits to 13 bits, an 8.3% increase in quantization levels.

📋 חלופה להתייחסות (לא בקטלוג)

ADS807E/1K

✅ Drop-In
📦 28-pin SSOP
Retains 12-bit resolution, parallel output, and the 28-SSOP pin-compatible footprint while increasing throughput from 40 MSPS to 53 MSPS, a 32.5% increase.

📋 חלופה להתייחסות (לא בקטלוג)

ADS800E/1K דירוגים מרביים ומאפיינים חשמליים

רזולוציה 12 bit
קצב דגימה 40 MSPS
Number of Analog Inputs 1 input
Number of A/D Converters 1 converter
Data Interface Parallel
Conversion Architecture Pipelined
מתח אספקה 5 V nominal
טמפרטורת פעולה -40 °C to 85 °C
מארז 28-pin SSOP
Package Width 5.3 mm
סוג הרכבה Surface mount
Terminal Count 28 terminals
Lead Form Gull wing
Temperature Grade Industrial
סטטוס RoHS Compliant

מדריך תצורת פינים של ADS800E/1K 5.3 mm

תצורת פינים עבור ADS800E/1K (מארזת 5.3 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 5.3 mm עבור ADS800E/1K

אין נתוני פריסת פינים מפורטים עבור ADS800E/1K.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADS800E/1K מתאים עבור 6 יישוםs: Communications Receiver Digitization, Industrial Process Measurement, Digital Feedback Control, Laboratory Data Acquisition, Medical and Diagnostic Instrumentation, Waveform Monitoring and Analysis.

🌐

Communications Receiver Digitization

The ADS800E/1K fits receiver and demodulation stages that need 12-bit quantization at up to 40 MSPS. Its parallel output supports direct capture by an FPGA, DSP, or logic device without a low-speed serial link. The single input is appropriate when one modulated or intermediate-frequency channel is sampled at a time. Designers should place the converter behind a gain-controlled, band-limiting front end and verify that clock jitter, analog bandwidth, and output timing preserve signal integrity at the intended operating rate.

🏭

Industrial Process Measurement

The ADS800E/1K can digitize rapidly varying sensor signals in industrial monitoring and control systems. Its 12-bit result provides 4,096 quantization levels, while the 40 MSPS rate captures more detail than a conventional slow ADC. The -40 °C to 85 °C industrial range supports equipment deployed across moderate industrial environments. A practical implementation uses a buffered sensor input, an anti-alias filter, and grounded digital return paths so switching circuitry does not corrupt the measurement.

🔧

Digital Feedback Control

The ADS800E/1K is appropriate for control loops requiring faster feedback than a general-purpose low-speed ADC provides. At 40 MSPS, it can sample a control or transducer signal and present a 12-bit parallel result to a DSP or FPGA. The pipeline architecture supports sustained conversion, while the one-input arrangement keeps the analog front end manageable. Loop design must account for propagation delay, output latency, filtering, and actuator limits so higher sample throughput does not inadvertently destabilize the control system.

📺

Laboratory Data Acquisition

The ADS800E/1K supports laboratory and test systems that sample a single analog channel at up to 40 MSPS. Its 12-bit parallel output can feed capture logic, a counter, or a processing FPGA, allowing sample-by-sample inspection of transient behavior. Instrumentation designs should use shielded analog routing, separate analog and return-current paths, and a clean clock source. Calibration records should capture gain and offset behavior because these characteristics influence accuracy more than resolution alone.

💊

Medical and Diagnostic Instrumentation

The ADS800E/1K can serve as the conversion stage in diagnostic equipment that captures a rapidly changing physiological or sensor-derived waveform. The 40 MSPS rate provides dense temporal samples, and the 12-bit parallel output can be processed by an FPGA. Because medical systems impose strict safety, isolation, and signal-integrity requirements, the converter must remain inside the appropriately isolated analog front end. Input protection, leakage, calibration, and patient-safety boundaries must be validated independently of the ADC datasheet.

📡

Waveform Monitoring and Analysis

The ADS800E/1K is useful for monitoring pulsed, transient, or repeating waveforms when a higher temporal resolution is required. Its single-channel pipelined ADC samples at 40 MSPS and provides a parallel code for thresholding, peak detection, spectral analysis, or time-domain processing. The analog front end should limit bandwidth according to the highest signal component of interest and provide the converter with a stable common-mode range. Clocking and capture timing should be derived from a low-jitter source to preserve amplitude accuracy.

What are the key specifications of ADS800E/1K that engineers should know?
The ADS800E/1K is a 12-bit, 40 MSPS, single-channel parallel-output ADC in a 28-pin SSOP package. According to the manufacturer datasheet, it operates from a nominal 5 V supply over -40 °C to 85 °C and uses a pipelined conversion architecture. Its 12-bit output provides 4,096 code levels, while the 40 MSPS sampling rate suits rapidly varying analog signals. These specifications place it between general-purpose slow ADCs and high-speed parallel converters requiring more bits, more channels, or a faster interface.
What is the operating voltage of ADS800E/1K?
The ADS800E/1K operates from a nominal 5 V supply. According to the manufacturer datasheet, it is a pipelined 12-bit ADC rated for 40 MSPS with a parallel digital output. The nominal supply value makes it suitable for conventional industrial and embedded analog systems, but the datasheet should be used to confirm absolute maximum supply limits, analog input limits, and decoupling requirements before the circuit is finalized.
What is the resolution and sampling rate of ADS800E/1K?
The ADS800E/1K provides 12-bit resolution and samples at 40 MSPS. According to the manufacturer datasheet, 12-bit conversion corresponds to 4,096 quantization levels. The 40 MSPS throughput is suitable for communications receivers, industrial measurement, rapid feedback loops, and acquisition systems in which signal bandwidth and acquisition timing must be evaluated against the converter's analog characteristics.
Where can I download the ADS800E/1K datasheet PDF?
The ADS800E/1K datasheet can be obtained from the Texas Instruments product documentation or the linked manufacturer-document repository. It is titled “ADS800E1K Datasheet” and describes this 12-bit, 40 MSPS converter. Use the official document for the authoritative pin-description table, timing diagrams, recommended application circuit, absolute-maximum ratings, and electrical characteristics before replacing it in an existing design.
Where can I find the ADS800E/1K pinout?
The ADS800E/1K pinout is shown in the manufacturer datasheet, which also includes the recommended pin configuration and functional descriptions for the 28-pin SSOP. The device uses a parallel output, so particular attention should be paid to data-bit order, clock, control, reference, supply, analog-input, and ground assignments. Use the datasheet pin-description table when laying out the PCB and when checking an existing board.
Is ADS800E/1K suitable for high-speed data acquisition?
The ADS800E/1K is suitable for data-acquisition tasks requiring up to 40 MSPS from a 12-bit converter. According to the manufacturer datasheet, it is a single-channel pipelined ADC with a parallel output. It is appropriate when the acquisition clock, analog front end, memory interface, and signal bandwidth can be balanced around a 40 MSPS operating rate, rather than for applications requiring simultaneous multichannel conversion at substantially higher throughput.
What is the best drop-in replacement for ADS800E/1K?
ADS807E/1K is a documented pin-compatible upgrade path within the same 28-pin SSOP family, but it raises the sampling rate from 40 MSPS to 53 MSPS. This higher throughput must be reflected in clocking, downstream data capture, and timing validation. For designs that must preserve the exact 40 MSPS operating point, changing the converter can alter acquisition and system-timing behavior even when the physical footprint remains unchanged.
Can ADS807E/1K replace ADS800E/1K?
ADS807E/1K can serve as a pin-compatible family upgrade because the documented relationship identifies the 28-SSOP devices as pin compatible. Its 53 MSPS sampling rate is 32.5% higher than the ADS800E/1K's 40 MSPS rate, while both provide 12-bit conversion and use a parallel interface. The replacement should therefore be validated for clock rate, output timing, analog bandwidth, power, and downstream acquisition capacity.
What is the best Texas Instruments equivalent for ADS800E/1K?
ADS807E/1K is the closest documented Texas Instruments pin-compatible option in the same 28-SSOP family. It retains 12-bit resolution and a parallel interface while increasing throughput from 40 MSPS to 53 MSPS. For a design requiring an exact functional match, the original electrical timing and analog characteristics must still be reviewed rather than assuming that a higher sampling rate alone guarantees transparent interchangeability.
ADS800E/1K vs ADS807E/1K: which is better for communications?
ADS807E/1K is better when the receiving architecture can use its 53 MSPS sampling rate, while ADS800E/1K is preferable when the existing design is intentionally clocked at 40 MSPS. Both provide 12-bit conversion, parallel output, and a 28-pin SSOP footprint. The ADS807E/1K offers 32.5% greater throughput, but the analog input network, clock quality, data-capture logic, and downstream processing must support the higher rate.
When should I choose ADS800E/1K over a higher-speed family member?
Choose ADS800E/1K when an existing 40 MSPS system must retain its established timing, analog front end, and data-capture behavior, particularly when servicing an obsolete production design. The device offers 12-bit resolution, a parallel interface, and a -40 °C to 85 °C industrial range. A higher-speed pin-compatible member is attractive for new designs only after verifying power, bandwidth, timing, and downstream capacity.
Is ADS800E/1K currently active?
The ADS800E/1K is listed as obsolete. According to the manufacturer product and distribution information, this 12-bit, 40 MSPS converter remains identifiable in the 28-SSOP package, but it should not be treated as a preferred new-design component. Existing users should request lifecycle and sourcing assistance before placing production orders, while new designs should evaluate an actively supported pin-compatible family member.
Where to buy ADS800E/1K online?
Use the “Request a Quote” form on this page to request ADS800E/1K availability, current lead time, and order quantities. Because the component is listed as obsolete, a quote response should confirm package, temperature grade, and traceable supply rather than relying on a generic inventory count. Give the complete ADS800E/1K manufacturer part number when requesting the quote to avoid confusion with related ADS800, ADS801, or ADS802 devices.
What is the price of ADS800E/1K?
Use the “Request a Quote” form on this page for the current ADS800E/1K price, quantity breaks, stock position, and sourcing conditions. The part is listed as obsolete, so a quote should confirm the exact manufacturer part number, 28-pin SSOP package, industrial temperature grade, and supply condition. Request separate quotations for prototype quantities and production quantities when planning an end-of-life transition.
What is the lead time for ADS800E/1K?
Request the current ADS800E/1K lead time through the “Request a Quote” form on this page. Since the device is listed as obsolete, lead time depends on remaining factory supply, traceable inventory, order size, and whether the requested units carry the original 28-SSOP package and industrial temperature grade. Include your required delivery date and annual usage so the sourcing response can reflect the actual production plan.

נתוני עזר הנדסיים עבור ADS800E/1K — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ADS800E/1K when maintaining an existing 40 MSPS, 12-bit, single-channel parallel ADC design is the priority, particularly for an obsolete assembly that cannot tolerate electrical or timing changes. Its 28-pin SSOP footprint, 5 V nominal supply, and industrial -40 °C to 85 °C range support controlled replacement and repair work. ADS807E/1K is appropriate when a higher-rate pin-compatible family member is desired, but its 53 MSPS rate requires revised clocking, bandwidth, power, and capture validation. ADS801/1K offers substantially greater throughput but doubles the sampling rate, making it suitable only when the complete acquisition chain can support 80 MSPS. ADS802/1K retains a 40 MSPS rate and adds one resolution bit, which may simplify selection when extra quantization is useful and the output bus can accommodate 13 bits. For all replacements, verify the manufacturer pin description, timing, analog specifications, and lifecycle status before committing to production.

השוואה עם חלופות

פרמטר מוצר זה ADS800/1K ADS800U/1K ADS801/1K ADS802/1K ADS807E/1K
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 13 bit 12 bit
Sampling Rate 40 MSPS 40 MSPS 40 MSPS 80 MSPS 40 MSPS 53 MSPS
Data Interface Parallel Parallel Parallel Parallel Parallel Parallel
Supply Voltage 5 V nominal 5 V nominal 5 V nominal 5 V nominal 5 V nominal 5 V nominal

מבדילים עיקריים

  • Lower conversion rate preserves a straightforward 40 MSPS acquisition point (לעומתADS807E/1K)
  • 12-bit output matches the original parallel data architecture (לעומתADS802/1K)
  • 40 MSPS throughput is half that of the higher-rate family member (לעומתADS801/1K)

הערות תכנון

Route the analog input as a short, controlled-impedance path directly from the front end to the converter. Keep the input node physically small, use a continuous ground reference beneath the analog section, and separate the 12-bit output bus from the analog input. The manufacturer datasheet's recommended application circuit should be the starting point for component placement and grounding.

Provide the converter with a stable 5 V nominal supply and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Avoid sharing narrow supply traces with clocking or high-current digital circuitry. Because the 40 MSPS conversion rate can increase dynamic power demand, verify supply droop and decoupling under the intended digital load rather than evaluating only static current.

Use a low-jitter clock and match output timing to the receiving FPGA, DSP, or capture logic. The 12-bit parallel bus creates numerous simultaneous switching edges, so account for trace length, return paths, and the receiving device's setup and hold requirements. For replacement with ADS801/1K, ADS802/1K, or ADS807E/1K, repeat the timing validation because sampling rate, resolution, or latency can differ.

Do not assume that an equal package guarantees identical system behavior. Confirm the analog input range, reference arrangement, clock polarity, output timing, conversion latency, and operating-temperature grade against the manufacturer datasheet. A 13-bit replacement also requires downstream handling to recognize the additional code bit, while faster replacements may exceed the capture capability of the original board.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance is identified by the product listing. No verified automotive qualification, REACH declaration, halogen-free declaration, lead-free statement, or conflict-minerals declaration was identified.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ads800 veeco ADS800E/1K datasheet ADS800E/1K pinout ADS800E/1K datasheet pdf ADS800E/1K replacement ADS800E/1K equivalent ADS800E/1K 40 MSPS ADC ADS800E/1K 28-SSOP pinout ADS800E/1K price ADS800E/1K stock ADS800E/1K vs ADS807E/1K Texas Instruments ADS800E/1K

רכיבים ומונחים קשורים

Texas Instruments ADS800E/1K ADS800/1K ADS800U/1K ADS801/1K ADS802/1K ADS807E/1K analog-to-digital converter ADC single-channel ADC pipelined ADC parallel interface data acquisition signal processing 12-bit resolution 40 MSPS 53 MSPS 80 MSPS 5 V supply 28-pin SSOP SSOP package family surface-mount package industrial temperature grade RoHS FPGA DSP
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר