Microchip Technology

ATSAME53J19A-AU - 120MHz Cortex-M4F MCU | Microchip

MPN: ATSAME53J19A-AU ✓ פעיל
1.71 V to 3.63 V Vdss 64-TQFP (10 mm x 10 mm) Package 120 MHz Speed 512 KB (512K x 8) Memory
כמות הזמנה מינימלית: 1 |

ATSAME53J19A-AU סקירה

Microchip Technology ATSAME53J19A-AU is a 32-bit ARM Cortex-M4F microcontroller with a floating-point unit, operating up to 120 MHz and integrating 512 KB of Flash memory in a 64-TQFP package measuring 10 mm by 10 mm. The device supports a 1.71 V to 3.63 V operating-voltage range and provides 51 I/O functions.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The Cortex-M4F belongs to the ARM Cortex-M product hierarchy and adds single-precision floating-point instructions to the 32-bit Cortex-M architecture. The ATSAME53 belongs to Microchip's SAM E53 high-performance microcontroller family, combining an Arm processor core with communications, security, and embedded-control capabilities for industrial networking equipment.

Key features include a 120 MHz maximum operating frequency, 512 KB of programmable Flash, 192 KB of SRAM, and a 64-TQFP surface-mount package. The floating-point unit accelerates calculations used in signal processing, control loops, and protocol handling. The 51 I/O functions support external sensors, actuators, status indicators, and communications circuitry, while integrated Ethernet-oriented functionality supports connected industrial equipment. A 1.71 V minimum operating voltage supports low-voltage system designs, while the 3.63 V maximum provides compatibility with standard 3.3 V embedded systems.

The ATSAME53J19A-AU uses a 32-bit Arm Cortex-M4F core with single-precision floating-point hardware. Its architecture supports interrupt-driven real-time control and deterministic peripheral operation. Dual-panel Flash with ECC and SRAM with ECC are listed as capabilities of the SAM E53 family, improving reliability in applications where transient faults matter. The 120 MHz clock rate provides substantial processing headroom for networking stacks, data acquisition, and supervisory control tasks without requiring an external processor.

Typical applications include industrial Ethernet gateways, building-control equipment, networked sensors, data loggers, motor supervisory controllers, and secure embedded gateways. The Ethernet interface makes the device appropriate for equipment that must bridge local sensors to an upper-level network. Its floating-point capability and 192 KB SRAM also suit filtering and real-time measurement tasks, while the 51 available I/O functions reduce the need for external interface expansion.

PCB design should preserve the 1.71 V to 3.63 V operating range with local supply decoupling and verify all signal levels against the device's I/O specifications. The 64-TQFP footprint requires adequate copper area and thermal dissipation for sustained processing workloads. Firmware must also initialize the clock, Ethernet physical interface, security features, and peripheral pins according to the manufacturer datasheet.

This product page combines the exact ordering code, memory and core characteristics, package details, procurement guidance, and application-focused engineering guidance. It also identifies the same-family ordering alternatives that can be evaluated when temperature grade, packaging, or extended-flash-performance requirements differ from the target configuration.

חלופות תחליף ישיר עבור ATSAME53J19A-AU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATSAME53J19A-AU (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, Operating Temperature, Operating Voltage, SRAM.

Microchip Technology
Package: 64-pin TQFP (10x10 mm)
ADC: 12-bit, up to 1 Msps, up to 16 channels
Operating Temperature: -40C to +85C (industrial)
השווה עם ATSAME53J19A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
ADC: 12-bit, up to 1 Msps
Operating Voltage: 3.3 V (single supply to VDDIN)
השווה עם ATSAME53J19A-AU →
Microchip Technology
Package: 64-QFN (9x9 mm) with exposed pad
ADC: 12-bit, up to 1 Msps, up to 24 channels
Operating Temperature: -40C to +125C (extended industrial)
השווה עם ATSAME53J19A-AU →

ATSAME53J19A-AFT

✅ Drop-In
📦 64-TQFP (10 mm x 10 mm)
Same 120 MHz Cortex-M4F core and 512 KB Flash as ATSAME53J19A-AU; ordering-suffix temperature and packing conditions differ and require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

ATSAME53J19A-AU-EFP

✅ Drop-In
Microchip Technology
📦 64-TQFP (10 mm x 10 mm)
ARM Cortex-M4F with FPU · 120 MHz · 512 KB with ECC · 3.3 V (single supply to VDDIN) · 10/100 MAC with 1588 PTP timestamps · USB 2.0 Full-Speed Host/Device · CAN-FD

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATSAME53J19A-MFT

✅ Drop-In
Microchip Technology
📦 64-TQFP (10 mm x 10 mm)
ARM Cortex-M4F · 120 MHz · 512 KB (512K x 8) dual-panel with ECC · 256 KB with ECC · 3.3 V typical (1.62 V to 3.6 V core/IO supply range) · -40C to +125C (extended industrial) · 64-QFN (9x9 mm) with exposed pad · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATSAME53J19A-AUT

✅ Drop-In
📦 64-TQFP (10 mm x 10 mm)
Same 120 MHz Cortex-M4F core, 512 KB Flash, and 64-TQFP footprint; AUT changes the shipment format to tape-and-reel rather than the AU tray configuration.

📋 חלופה להתייחסות (לא בקטלוג)

ATSAME53J19A-AU דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM Cortex-M4F microcontroller
Processor Core ARM Cortex-M4F with Floating Point Unit
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB (512K x 8)
SRAM 192 KB
Operating Voltage Range 1.71 V to 3.63 V
Number of I/O 51 I/O
Architecture 32-bit RISC
מארז 64-TQFP (10 mm x 10 mm)
סוג הרכבה Surface mount
טמפרטורת פעולה -40 °C to 85 °C
Ethernet Support Integrated Ethernet-oriented communications functionality
Flash ECC Dual-panel Flash with ECC supported by SAM E53 family
SRAM ECC SRAM with ECC supported by SAM E53 family
Shipping Configuration Tray
סטטוס RoHS Compliant
Series SAM E53
Qualification Temperature Grade Industrial temperature grade
Nominal System Supply 3.3 V

מדריך תצורת פינים של ATSAME53J19A-AU 64-tqfp (10 mm x 10 mm)

תצורת פינים עבור ATSAME53J19A-AU (מארזת 64-tqfp (10 mm x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-tqfp (10 mm x 10 mm) עבור ATSAME53J19A-AU

אין נתוני פריסת פינים מפורטים עבור ATSAME53J19A-AU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATSAME53J19A-AU מתאים עבור 6 יישוםs: Industrial Ethernet Gateway, Building Automation Controller, Networked Data Logger, Motor Monitoring and Control, Secure IoT Sensor Node, Precision Measurement Controller.

🌐

Industrial Ethernet Gateway

The ATSAME53J19A-AU fits an industrial Ethernet gateway because its 120 MHz Cortex-M4F core provides capacity for protocol handling, local control, and diagnostics. The 192 KB SRAM supports packet buffering and concurrent tasks, while the 51 I/O functions accommodate status indicators, reset controls, and local sensors. Its 1.71 V to 3.63 V range supports a 3.3 V system architecture. The Ethernet physical interface still requires a suitable transceiver and magnetic network connection, with timing and layout implemented according to the manufacturer reference guidance.

🏭

Building Automation Controller

The ATSAME53J19A-AU is suitable for a building-automation controller that combines Ethernet communication with discrete monitoring and control. Its 51 I/O functions can connect sensors, relay drivers, and digital status inputs, while the Cortex-M4F core executes control logic and protocol tasks at up to 120 MHz. A nominal 3.3 V rail falls inside the device's 1.71 V to 3.63 V operating range. Designers should reserve clean supply routing and place decoupling capacitance close to the device pins.

🖥️

Networked Data Logger

A networked data logger benefits from the ATSAME53J19A-AU's 120 MHz Cortex-M4F processing rate and 192 KB SRAM, which support acquisition routines, local filtering, and data buffering before network transmission. The 512 KB Flash stores firmware and configuration data, while the -40 °C to 85 °C operating range suits standard industrial environments. The device's 51 I/O functions simplify sensor and storage-control connections. Firmware should use ECC-aware memory procedures and provide controlled shutdown behavior for data integrity.

⚡

Motor Monitoring and Control

The ATSAME53J19A-AU can supervise a motor system by executing current and speed-control calculations, applying filter algorithms, and coordinating network commands. Its Cortex-M4F single-precision floating-point hardware accelerates control mathematics, while the 51 I/O functions connect position sensors, switch-state inputs, and gate-driver control signals. The 1.71 V to 3.63 V operating range supports compact 3.3 V controller boards. Validate timing margins, isolation boundaries, and thermal performance in the final motor-drive environment.

🧩

Secure IoT Sensor Node

The ATSAME53J19A-AU supports an IoT sensor node that must combine local measurement, secure communication, and remote management. Its 120 MHz Cortex-M4F core can process sensor data and communication tasks, while 192 KB SRAM accommodates protocol buffers and application state. The 51 available I/O functions provide flexible connections to sensors and actuators. The SAM E53 family's dual-panel Flash with ECC and SRAM with ECC improves resilience for persistent code and working memory, although exact security-feature configuration must follow the manufacturer documentation.

🔧

Precision Measurement Controller

The ATSAME53J19A-AU is appropriate for precision measurement equipment because its Cortex-M4F core supports digital filtering and floating-point calibration calculations. The 120 MHz operating speed can combine acquisition sequencing with communication and supervisory logic, while 192 KB SRAM provides room for sample buffers. A 3.3 V supply is supported by the 1.71 V to 3.63 V operating range. Analog front-end design remains separate from the microcontroller, so grounding, reference-voltage stability, and PCB isolation should be planned together with the digital layout.

What is the operating voltage of ATSAME53J19A-AU?
The ATSAME53J19A-AU operates from 1.71 V to 3.63 V. According to the Microchip product listing, the 64-TQFP device is suitable for a nominal 3.3 V embedded system while retaining operation at lower supply voltages when the application allows reduced performance or a lower operating point. Input, output, and peripheral voltages must remain within the limits defined by the manufacturer datasheet.
What processor and clock speed does ATSAME53J19A-AU use?
The ATSAME53J19A-AU uses a 32-bit ARM Cortex-M4F processor and operates up to 120 MHz. According to the Microchip product page, the Cortex-M4F includes a Floating Point Unit, distinguishing it from a basic Cortex-M4 core. This hardware arithmetic support is useful for digital filters, control calculations, and other workloads that would otherwise consume more processor cycles.
How much Flash and SRAM does ATSAME53J19A-AU have?
The ATSAME53J19A-AU provides 512 KB of Flash memory and 192 KB of SRAM. According to the Microchip distributor listing, Flash is organized as 512K x 8. The SAM E53 family also supports dual-panel Flash with ECC and SRAM with ECC, adding fault-tolerance capabilities that are useful in industrial systems requiring dependable nonvolatile code storage and working-memory operation.
Where can I download the ATSAME53J19A-AU datasheet?
The ATSAME53J19A-AU datasheet is available through the official Microchip product page at https://www.microchip.com/en-us/product/ATSAME53J19A. Select the product documentation resources for the complete pin description, electrical characteristics, clock configuration, memory map, Ethernet requirements, and package drawings. Use that documentation when assigning the 64-TQFP pins and planning PCB routing.
Where can I find the ATSAME53J19A-AU pinout?
The ATSAME53J19A-AU pinout is documented in the Microchip device data sheet and package diagrams. The device uses a 64-TQFP package with 51 I/O functions, so not every physical lead is a general-purpose GPIO. Use the manufacturer pin-description table when connecting power, ground, clock, reset, programming, debug, communications, and peripheral signals.
Where to buy ATSAME53J19A-AU online?
Use the Request a Quote form on this page to request ATSAME53J19A-AU by the exact ordering code ATSAME53J19A-AU. The form allows buyers to specify quantity, target delivery date, and shipment requirements. Confirm that the quotation identifies the 64-TQFP industrial-temperature configuration rather than a tape-and-reel or other packaging code.
What is the price of ATSAME53J19A-AU?
Pricing for ATSAME53J19A-AU depends on order quantity, packaging requirements, availability, and delivery terms. Submit a request through the Request a Quote form on this page for a current quotation and lead time. The request should include the exact MPN ATSAME53J19A-AU so that a tray-packaged 64-TQFP configuration is not confused with a different ordering suffix.
What is the lead time and stock status for ATSAME53J19A-AU?
Current stock and lead time for ATSAME53J19A-AU should be confirmed through the Request a Quote form on this page. Include the required quantity, target shipment date, and acceptable date code criteria in the request. Because ordering-code suffixes can select different packaging or qualification conditions, confirm the complete MPN before accepting a delivery commitment.
Is ATSAME53J19A-AU in stock?
Current ATSAME53J19A-AU availability is confirmed through the Request a Quote form on this page. The form provides the route for checking the exact ordering code against requested quantity and delivery requirements. For production planning, request confirmation of packaging, operating-temperature grade, date code, and shipment schedule with the availability response.
ATSAME53J19A-AU vs ATSAME53J19A-AFT - which is better for industrial use?
ATSAME53J19A-AU is the specified 120 MHz Cortex-M4F device with 512 KB Flash in a 64-TQFP package and a -40 °C to 85 °C operating range. ATSAME53J19A-AFT is another same-family 64-TQFP ordering option listed with the same 120 MHz core and 512 KB Flash. Select AU when its exact commercial and packaging configuration matches the design; select AFT only after confirming its suffix-specific grade and shipment format.
What is the difference between ATSAME53J19A-AU and ATSAME53J19A-MFT?
Both ATSAME53J19A-AU and ATSAME53J19A-MFT belong to the ATSAME53J19A family, but their ordering suffixes distinguish configuration details. According to the available family and cross-reference records, ATSAME53J19A-AU is a 120 MHz Cortex-M4F device with 512 KB Flash in a 64-TQFP package. Confirm the MFT suffix's temperature, packaging, and qualification conditions against the Microchip datasheet before substitution.
When should I choose ATSAME53J19A-AU over ATSAME53J19A-AU-EFP?
Choose ATSAME53J19A-AU when the standard ATSAME53J19A-AU configuration satisfies the required -40 °C to 85 °C operating range, tray packaging, and standard SAM E53 configuration. Consider ATSAME53J19A-AU-EFP when its documented extended-flash-performance characteristics are necessary. The EFP option adds a specific engineering feature and must be evaluated against its exact ordering documentation.
Is ATSAME53J19A-AU suitable for an industrial Ethernet controller?
The ATSAME53J19A-AU is suitable for industrial Ethernet-connected equipment when the design uses its 120 MHz Cortex-M4F core, 192 KB SRAM, 51 I/O functions, and SAM E53 communications resources. Its floating-point unit also benefits local measurement and filtering. The Ethernet physical layer and magnetic interface remain external design requirements and must be matched to the device's manufacturer reference guidance.
What can replace ATSAME53J19A-AU?
The closest drop-in choices identified for ATSAME53J19A-AU are ATSAME53J19A-AFT, ATSAME53J19A-AU-EFP, and ATSAME53J19A-MFT. They remain in the 64-TQFP SAM E53J19A family and retain the 120 MHz Cortex-M4F and 512 KB Flash architecture. Verify suffix-specific temperature grade, packaging, qualification, and firmware-support requirements before authorizing a board-level replacement.
What are the key specifications of ATSAME53J19A-AU that engineers should know?
The ATSAME53J19A-AU combines a 120 MHz ARM Cortex-M4F core, 512 KB Flash, 192 KB SRAM, 51 I/O functions, and a 1.71 V to 3.63 V operating range in a 64-TQFP package. According to the Microchip product page, the SAM E53 family supports dual-panel Flash with ECC and SRAM with ECC. Its -40 °C to 85 °C range and Ethernet-oriented connectivity suit industrial embedded equipment.

נתוני עזר הנדסיים עבור ATSAME53J19A-AU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ATSAME53J19A-AU when the design requires a 120 MHz ARM Cortex-M4F microcontroller, 512 KB Flash, 192 KB SRAM, 51 I/O functions, and a 64-TQFP industrial-temperature configuration in tray packaging. Choose ATSAME53J19A-AFT when its ordering code satisfies the required qualification or shipment conditions while retaining the same core, memory class, and footprint. Choose ATSAME53J19A-AU-EFP when extended flash performance is a documented requirement. Choose ATSAME53J19A-MFT when its temperature and packing configuration matches the product specification after checking the ordering code. Choose ATSAME53J19A-AUT for automated tape-and-reel assembly. For every alternative, verify electrical characteristics, peripheral availability, package drawings, firmware support, and qualification conditions before treating it as a drop-in replacement.

השוואה עם חלופות

פרמטר מוצר זה ATSAME53J19A-AFT ATSAME53J19A-AU-EFP ATSAME53J19A-MFT ATSAME53J19A-AUT
Package 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 512 KB 512 KB 512 KB
Special Configuration Standard SAM E53 configuration AFT ordering configuration Extended flash performance MFT ordering configuration Tape-and-reel ordering configuration

מבדילים עיקריים

  • Exact 512 KB Flash configuration in the 64-TQFP footprint (לעומתATSAME53J19A-AFT)
  • Standard industrial ordering configuration for ATSAME53J19A-AU (לעומתATSAME53J19A-AU-EFP)
  • Tray configuration matches the target procurement format (לעומתATSAME53J19A-AUT)
  • 192 KB SRAM supports simultaneous control and communication work (לעומתATSAME53J19A-MFT)

הערות תכנון

Design the supply rail for the device's 1.71 V to 3.63 V operating range and place the required input and output capacitors close to their associated pins. Keep high-current Ethernet transceiver and magnetic-interface supplies separate from sensitive analog returns wherever the system architecture permits. Confirm startup, brownout, and regulator tolerance requirements against the Microchip electrical-characteristics documentation before releasing the power design.

Route clocks, programming signals, debug interfaces, and communication lines away from noisy switching nodes. Maintain continuous ground references beneath signal paths and use the 64-TQFP land pattern exactly as defined by the manufacturer package drawing. Ethernet magnetics and high-speed differential routing require controlled impedance and short return paths; follow the Microchip reference design and Ethernet-interface layout guidance for the final stack-up.

The 120 MHz Cortex-M4F operating rate and Ethernet activity can increase device power dissipation during sustained computation. Provide adequate PCB copper around the TQFP leads, control thermal exposure across the -40 °C to 85 °C range, and avoid enclosing the assembly without thermal analysis. Validate junction temperature with the actual processor loading, supply voltage, board construction, and enclosure rather than relying only on ambient temperature.

Do not assume that every one of the 51 I/O functions can be assigned independently; package pins also carry power, clock, reset, debug, programming, and communications functions. Review the complete pin-description table before allocating a peripheral. Likewise, verify the distinction between ATSAME53J19A-AU and suffix variants so that tray, tape-and-reel, temperature-grade, and extended-performance conditions do not change unexpectedly.

Keep the 120 MHz clock route short and return it through a continuous ground reference, and place clock-support components according to the manufacturer recommended layout. Provide unobstructed access to programming and debug signals for manufacturing and field updates. If the Ethernet interface uses an external transceiver, isolate its digital and analog supply paths to prevent communication activity from disturbing measurement or control signals.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product listing identifies the ATSAME53J19A-AU as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration is available for this ordering code.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ATSAME53J19A-AU datasheet ATSAME53J19A-AU pinout ATSAME53J19A-AU specifications ATSAME53J19A-AU price ATSAME53J19A-AU stock ATSAME53J19A-AU equivalent ATSAME53J19A-AU replacement ATSAME53J19A-AU vs ATSAME53J19A-AFT ATSAME53J19A-AU 64 TQFP ATSAME53J19A-AU 120MHz microcontroller ATSAME53J19A-AU industrial Ethernet Microchip ATSAME53J19A-AU

רכיבים ומונחים קשורים

Microchip Technology ATSAME53J19A-AU ATSAME53J19A-AFT ATSAME53J19A-AU-EFP ATSAME53J19A-MFT ATSAME53J19A-AUT SAM E53 ARM Cortex-M4F ARM Cortex-M microcontroller 32-bit microcontroller embedded microcontroller semiconductor floating-point unit single-precision floating point 512 KB Flash 192 KB SRAM ECC dual-panel Flash 120 MHz 1.71 V to 3.63 V 64-TQFP TQFP package family surface-mount package Ethernet industrial automation building automation IoT sensor node motor control precision measurement RoHS 51 I/O
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר