Microchip Technology

ATTINY28V-1AU - 8-Bit AVR MCU, 2KB Flash | Microchip

MPN: ATTINY28V-1AU ✓ פעיל
2.5 V, 3.3 V, and 5 V Vdss 32-pin TQFP, 7 x 7 mm Package 1.2 MHz Speed 2 KB (1K x 16 words) Memory
כמות הזמנה מינימלית: 1 |

ATTINY28V-1AU סקירה

Microchip ATTINY28V-1AU is an 8-bit AVR RISC microcontroller with a 1.2 MHz maximum clock, 2 KB of Flash memory organized as 1K x 16 words, and 32-pin TQFP packaging in a 7 x 7 mm footprint. It combines low-power CMOS operation with a compact peripheral set for embedded control, keyboard scanning, and simple analog-interface designs.

An 8-bit AVR microcontroller is a compact embedded-control IC that executes instructions using an AVR RISC core. Microcontrollers integrate processor logic, program memory, registers, and peripherals into one package, allowing a design to replace separate processor, memory, and interface components. The ATTINY28 family occupies the low-complexity end of the TinyAVR portfolio and is designed for straightforward control tasks rather than high-volume data processing.

The device provides 2 KB of programmable Flash, 32 general-purpose registers, a keyboard interrupt function, and an analog comparator. Its 8-bit architecture provides 32 general-purpose working registers, while the one-cycle execution capability of the AVR core supports throughput approaching 1 MIPS per megahertz. The listed 1.2 MHz operating speed makes it suitable for motor, appliance, keypad, and compact industrial-control designs that do not require a high-performance MCU.

The ATTINY28V-1AU operates across the listed 2.5 V, 3.3 V, and 5 V supply options, allowing the same controller family to support different system rails. The keyboard interrupt can reduce polling demands in matrix-keypad designs, while the analog comparator supports threshold detection, basic signal conditioning, and simple sensor-interface functions without requiring a separate comparator IC.

Typical applications include keyboard scanners, small appliance controllers, optocoupler and switch interfaces, basic motor-control logic, LED sequencing, and low-cost embedded automation modules. The 32-pin TQFP package provides more connection options than the smaller ATTINY28 packages, making it useful when several I/O lines or power-related pins are needed on a compact PCB.

Keep the clock and power rails stable, route decoupling capacitors close to the supply pins, and verify every external pull-up or pull-down value against the configured I/O source current. Before firmware transfer or production use, check the fuse configuration and application circuit against the manufacturer pin-description table so that unused pins, reset behavior, and programming connections remain consistent with the selected board revision.

This page combines the ATTINY28 family architecture, package information, application guidance, and technically relevant replacement comparisons. It also organizes pin, sourcing, lifecycle, and design questions into an engineering-focused format that supports faster component evaluation than a basic distributor listing alone.

חלופות תחליף ישיר עבור ATTINY28V-1AU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATTINY28V-1AU (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Flash Memory, Maximum Clock Frequency, Mounting Type, Package.

Microchip Technology
Architecture: AVR 8-bit RISC
Flash Memory: 4 KB ISP Flash
Maximum Clock Frequency: 12 MHz
השווה עם ATTINY28V-1AU →

ATTINY28V-1AC

✅ Drop-In
📦 32-TQFP (7x7 mm)
Same 32-pin TQFP footprint and 2 KB Flash class; suffix-specific electrical and temperature characteristics require verification

📋 חלופה להתייחסות (לא בקטלוג)

ATTINY28V-1PI

✅ Drop-In
📦 TQFP-32
Same ATTINY28V family and 32-pin package; listed clock is 1 MHz versus 1.2 MHz, a 16.7% reduction

📋 חלופה להתייחסות (לא בקטלוג)

ATTINY28L-4AU

✅ Drop-In
📦 TQFP-32
Same 32-pin TQFP package and 2 KB Flash; listed clock increases from 1.2 MHz to 4 MHz while low-voltage operation differs

📋 חלופה להתייחסות (לא בקטלוג)

ATTINY48-AU

✅ Drop-In
Microchip Technology
📦 TQFP-32
8-bit AVR RISC-based microcontroller · AVR 8-bit RISC · 12 MHz · 1.8 V to 5.5 V · Up to 12 MIPS at 12 MHz · 4 KB ISP Flash · 64 bytes · 256 bytes

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATTINY28V-1AU דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit RISC microcontroller
Architecture AVR RISC
תדר שעון מקסימלי 1.2 MHz
Flash Memory 2 KB (1K x 16 words)
General-Purpose Registers 32 registers
Data Width 8 bits
Throughput Up to 4 MIPS
Supply Voltage Options 2.5 V, 3.3 V, and 5 V
Peripheral Feature Keyboard interrupt
Analog Feature Analog comparator
מארז 32-pin TQFP, 7 x 7 mm
סוג הרכבה Surface-mount
Program Memory Type Flash

מדריך תצורת פינים של ATTINY28V-1AU 32-pin tqfp, 7 x 7 mm

תצורת פינים עבור ATTINY28V-1AU (מארזת 32-pin tqfp, 7 x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 32-pin tqfp, 7 x 7 mm עבור ATTINY28V-1AU

אין נתוני פריסת פינים מפורטים עבור ATTINY28V-1AU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATTINY28V-1AU מתאים עבור 6 יישוםs: Matrix Keyboard Controller, Small Appliance Control, LED Sequencing and Indicators, Switch and Optocoupler Interface, Simple Threshold Sensor Interface, Compact Motor and Valve Control.

🔧

Matrix Keyboard Controller

The ATTINY28V-1AU fits matrix-keypad scanning because it combines a keyboard interrupt with 32 general-purpose registers and an 8-bit AVR processor. According to the Microchip ATTINY28 manufacturer datasheet, the interrupt can initiate a scan when a key event is detected instead of requiring continuous polling. The device's listed 1.2 MHz clock is sufficient for debounce timing and row-column scanning, while the 32-pin TQFP package provides ample connections for scanned lines and control signals. Firmware should still implement debounce, key rollover, and long-press behavior, and the PCB should reserve external pull-up or pull-down footprints so the I/O mode can be selected during development.

🔧

Small Appliance Control

The ATTINY28V-1AU is suitable for compact appliance controllers that coordinate switches, indicators, relays, and a small keypad or sensor interface. Its 2 KB of Flash provides room for compact state-machine firmware, and the 8-bit AVR RISC architecture supports practical control logic at the listed 1.2 MHz operating speed. According to the Microchip ATTINY28 manufacturer datasheet, the controller includes 32 registers, a keyboard interrupt, and an analog comparator. Use the analog comparator for simple threshold detection when a dedicated sensor interface is unnecessary, while retaining careful separation between mains-adjacent switching circuitry and low-voltage control signals in the final layout.

💡

LED Sequencing and Indicators

For LED sequencing, status indication, and panel backlighting, the ATTINY28V-1AU provides enough I/O capability for multiple control lines without adopting a larger microcontroller. According to the Microchip ATTINY28 manufacturer datasheet, the AVR core supports throughput approaching 1 MIPS per megahertz, which is more than adequate for deterministic update rates and button-driven lighting effects. The listed 2.5 V, 3.3 V, and 5 V supply options allow selection of a system rail that matches the indicator circuitry. Design the LED paths for the intended drive current, use suitable transistor or driver stages when the total load exceeds an I/O pin's safe limit, and place bypass capacitance directly beside the controller's supply connections.

🏭

Switch and Optocoupler Interface

The ATTINY28V-1AU can supervise switches, relay-control signals, and optocoupler outputs in compact industrial or appliance electronics. Its 32-pin TQFP package exposes more I/O than smaller ATTINY28 variants, while the 8-bit processing core is sufficient to debounce inputs and implement interlocks or state transitions. According to the Microchip ATTINY28 manufacturer datasheet, the device operates at up to 1.2 MHz and includes 32 general-purpose registers. Maintain compatible logic levels between the MCU and interface components, include flyback protection for inductive loads, and keep switching-current paths physically separated from sensitive control traces to reduce coupling into the analog comparator and input circuitry.

🧩

Simple Threshold Sensor Interface

The ATTINY28V-1AU can support basic sensing functions where an on-chip comparator is adequate, such as threshold detection, simple level alarms, or monitoring an analog signal converted into a switching decision. According to the Microchip ATTINY28 manufacturer datasheet, the device includes an analog comparator alongside its 8-bit AVR core and 2 KB of programmable Flash. This avoids requiring a separate comparator in straightforward designs, although input range, offset behavior, noise, and response time still need to be evaluated against the sensor signal. Keep sensitive analog routing short, provide a stable reference arrangement, and avoid routing high-current switching paths beneath the comparator input.

⚡

Compact Motor and Valve Control

The ATTINY28V-1AU can serve as the supervisory controller for a small motor, solenoid, stepper sequence, or valve system where the main power device is driven externally. Its listed 1.2 MHz clock supports timing loops and sequence management, while the 32-pin TQFP package provides a practical balance between I/O access and board area. According to the Microchip ATTINY28 manufacturer datasheet, the AVR architecture executes many instructions in one clock cycle. Add external transistor or MOSFET drive stages rather than driving inductive loads directly from an I/O pin, include flyback protection, and validate timing under worst-case supply voltage and motor-load conditions before production use.

What are the key specifications of ATTINY28V-1AU that engineers should know?
The ATTINY28V-1AU is an 8-bit AVR RISC microcontroller rated for up to 1.2 MHz, with 2 KB of Flash memory, 32 general-purpose registers, a keyboard interrupt, an analog comparator, and a 32-pin TQFP package. According to the Microchip ATTINY28 manufacturer datasheet, the device supports throughput approaching 1 MIPS per megahertz and is listed with a maximum throughput of 4 MIPS. Its listed operating-voltage options include 2.5 V, 3.3 V, and 5 V.
What is the operating voltage of ATTINY28V-1AU?
The ATTINY28V-1AU is listed for 2.5 V, 3.3 V, and 5 V operation. According to the Microchip ATTINY28 manufacturer datasheet and the product specifications, the device is a low-voltage CMOS AVR controller intended for embedded systems running from common embedded supply rails. Confirm the exact minimum and maximum limits for the temperature grade and production marking in the manufacturer datasheet before applying the part to a new power rail.
How much Flash memory does ATTINY28V-1AU contain?
The ATTINY28V-1AU contains 2 KB of programmable Flash memory, organized as 1K x 16 words. The Microchip ATTINY28 manufacturer datasheet identifies Flash as the device's program-memory type. This footprint is sufficient for compact control firmware, state machines, keypad scanning, and simple peripheral coordination, but the 2 KB limit should be checked before loading loop-heavy application code, bootloaders, or large lookup tables.
What is the maximum clock frequency of ATTINY28V-1AU?
The ATTINY28V-1AU has a listed maximum clock frequency of 1.2 MHz. According to the Microchip ATTINY28 manufacturer datasheet, the AVR core can approach 1 MIPS per megahertz because many instructions are completed in one clock cycle. The same documentation lists throughput up to 4 MIPS. Actual timing still depends on the selected clock source, fuse configuration, supply voltage, and peripheral settings.
Where can I download the ATTINY28V-1AU datasheet PDF?
The ATTINY28V-1AU documentation is available from the Microchip ATTINY28 product page and through the manufacturer-linked PDF at https://www.microchip.com/en-us/product/ATTINY28. According to Microchip, the device combines 2 KB of Flash, 32 general-purpose registers, a keyboard interrupt, and an analog comparator. Use the manufacturer datasheet for the definitive pin-description table, electrical characteristics, fuse behavior, and package drawing.
Where can I find the ATTINY28V-1AU pinout?
The ATTINY28V-1AU pinout is documented in the Microchip ATTINY28 manufacturer datasheet under the package and pin-description information. The device is packaged as a 32-pin TQFP in a 7 x 7 mm outline. When assigning PCB nets, use the datasheet pin-description table to identify power, ground, reset, programming, clock, I/O, and no-connect positions rather than relying on a generic 32-pin drawing.
Can ATTINY28V-1AU be used for keyboard scanning?
Yes, the ATTINY28V-1AU includes a keyboard interrupt feature specifically suited to matrix-keypad designs. According to the Microchip ATTINY28 manufacturer datasheet, this capability can notify the controller when a key event occurs, reducing the need for continuous polling. Firmware must still debounce the contacts and interpret the scanned row and column values, while external pull-ups or pull-downs should be selected for the configured I/O operating mode.
What can replace ATTINY28V-1AU?
The closest documented replacements are ATTINY28V-1AC, ATTINY28V-1PI, ATTINY28L-4AU, and ATTINY48-AU, although each requires review of package markings, supply voltage, clock rate, memory, and firmware constraints. According to the Microchip ATTINY28 manufacturer datasheet, the target uses 2 KB of Flash, a 32-pin TQFP package, and an AVR RISC core. Treat any replacement as a drop-in only after checking every pin and electrical limit.
Is ATTINY28V-1AU the same as ATTINY28V-1AC?
The ATTINY28V-1AC is a closely related 32-pin TQFP AVR device, but it should not be treated as identical without checking its suffix-specific grade and marking. According to the Microchip ATTINY28 manufacturer datasheet, the ATTINY28 family provides 2 KB of Flash, 32 registers, a keyboard interrupt, and an analog comparator. Both parts share the principal architecture, while temperature, qualification, and ordering-code characteristics must be confirmed in the manufacturer documentation.
When should I choose ATTINY28V-1AU over ATTINY28L-4AU?
Choose the ATTINY28V-1AU when the design needs its listed 1.2 MHz speed and broader 2.5 V, 3.3 V, and 5 V supply options. Consider ATTINY28L-4AU when its higher listed clock and reduced-voltage profile better match the application. According to the Microchip ATTINY28 manufacturer datasheet, both belong to the ATTINY28 family with 2 KB of Flash and 32-pin TQFP packaging, but operating voltage and timing must be checked before substitution.
Is ATTINY28V-1AU suitable for a compact low-cost control board?
The ATTINY28V-1AU is suitable for compact embedded control boards that need modest processing speed, 2 KB of Flash, an analog comparator, and a moderate number of I/O connections. According to the Microchip ATTINY28 manufacturer datasheet, the AVR core executes many instructions in a single cycle and supports low-power CMOS operation. Its 32-pin TQFP package provides more routing flexibility than smaller ATTINY28 packages while remaining practical for automated assembly.
What is the best Atmel equivalent for ATTINY28V-1AU?
ATTINY28V-1AC is the closest directly documented Atmel-family candidate with the same 32-pin TQFP format and 2 KB Flash class. According to the Microchip ATTINY28 manufacturer datasheet, ATTINY28V is associated with the 1.2 MHz listing, whereas other family suffixes can change voltage or clock behavior. Verify suffix-specific temperature, qualification, and marking requirements before approving a replacement.
How do ATTINY28V-1AU and ATTINY28L-4AU differ?
The principal documented difference is clock and supply behavior: ATTINY28V-1AU is listed at 1.2 MHz with 2.5 V, 3.3 V, and 5 V options, while ATTINY28L-4AU is listed at up to 4 MHz with 3.3 V and 5 V operation. According to the Microchip ATTINY28 manufacturer datasheet, both retain 2 KB of Flash and 32-pin TQFP packaging. Select the lower-voltage V part when 2.5 V operation is essential.
Where to buy ATTINY28V-1AU online?
ATTINY28V-1AU can be requested through the Request a Quote form on this page, where the exact package code and current production requirements should be stated. The Microchip ATTINY28 manufacturer datasheet identifies the target as a 32-pin TQFP AVR device with 2 KB of Flash. The form is the appropriate route for confirming supply, quantity, packaging, current lead time, and shipment requirements.
What is the lead time and stock status of ATTINY28V-1AU?
Current stock and lead time for ATTINY28V-1AU should be confirmed through the Request a Quote form on this page. According to the Microchip ATTINY28 product page, ATTINY28V is part of the ATTINY28 family, but quotation and availability can change with the exact ordering suffix, package code, quantity, and delivery schedule. Include the target board quantity and required packaging when requesting the quotation.
Is ATTINY28V-1AU in stock and what is its price?
Use the Request a Quote form on this page to determine current ATTINY28V-1AU availability, price, and minimum order quantity for your required quantity. According to the Microchip ATTINY28 manufacturer datasheet, the part is an 8-bit AVR controller with 2 KB of Flash in a 32-pin TQFP package. Supply status should be tied to the exact suffix and packing configuration rather than a generic ATTINY28 family inventory record.

נתוני עזר הנדסיים עבור ATTINY28V-1AU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ATTINY28V-1AU for a compact control design that requires the documented 2 KB Flash configuration, 1.2 MHz clock, keyboard interrupt, analog comparator, and listed operation from 2.5 V through 5 V. Select ATTINY28V-1AC when its suffix-specific production characteristics fit the project while retaining the same core package and memory class. Consider ATTINY28V-1PI only after confirming that its 1 MHz clock and 1.8 V operating point satisfy the timing and rail requirements. Choose ATTINY28L-4AU when higher clock performance is useful and its 3.3 V or 5 V operating range is appropriate. ATTINY48-AU warrants evaluation only after checking its memory, peripheral, and firmware differences. In every case, validate the manufacturer pin table, package drawing, fuse configuration, and electrical limits before releasing a PCB or production firmware.

השוואה עם חלופות

פרמטר מוצר זה ATTINY28V-1AC ATTINY28V-1PI ATTINY28L-4AU ATTINY48-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-TQFP (7x7 mm) 32-TQFP (7x7 mm) TQFP-32 TQFP-32 TQFP-32
Architecture AVR RISC, 8-bit AVR RISC, 8-bit AVR RISC, 8-bit AVR RISC, 8-bit AVR RISC, 8-bit

מבדילים עיקריים

  • Broader listed supply-voltage selection than the 1.8 V ATTINY28V-1PI option (לעומתATTINY28V-1PI)
  • Lower listed clock rate provides a distinct timing choice for ATTINY28L designs (לעומתATTINY28L-4AU)
  • Direct family match retains the documented 2 KB Flash and keyboard-interrupt feature set (לעומתATTINY28V-1AC)

הערות תכנון

Place the controller's decoupling capacitor immediately beside the supply and ground pins, with a short, low-inductance return path. Keep programming and debug signal traces accessible and away from switching nodes. Because the ATTINY28V-1AU uses a 32-pin TQFP footprint, inspect the land pattern against the manufacturer package drawing and verify pin 1 orientation during PCB assembly.

Design the power rail for the voltage option selected for the finished system, including 2.5 V, 3.3 V, or 5 V operation. Check the clock and analog functions at the minimum rail voltage rather than relying only on nominal supply values. Add local bypass capacitance, avoid sharing high-current return paths with sensitive input traces, and confirm reset behavior during power ramp conditions.

Do not assume that every ATTINY28 suffix has identical timing or voltage limits. Before substituting ATTINY28V-1AC, ATTINY28V-1PI, ATTINY28L-4AU, or ATTINY48-AU, compare clock behavior, supply range, memory requirements, peripheral functions, reset pins, and programming connections against the manufacturer documentation. A matching TQFP outline alone does not prove functional interchangeability.

For matrix-keypad or switch inputs, select pull-up or pull-down resistors according to the configured I/O mode and keep traces short enough to limit capacitive noise. Firmware should debounce contacts and avoid treating a brief contact event as a valid key until the timing criteria are met. Route clock and sensitive analog lines away from relay, motor, and LED-switching currents.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance status requires confirmation from the manufacturer's current material-declaration documentation for the exact ordering suffix.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ATTINY28V-1AU datasheet ATTINY28V-1AU pinout ATTINY28V-1AU datasheet pdf ATTINY28V-1AU equivalent ATTINY28V-1AU replacement ATTINY28V-1AU TQFP-32 footprint ATTINY28V-1AU price ATTINY28V-1AU stock Microchip ATTINY28V-1AU ATTINY28V-1AU vs ATTINY28L-4AU ATTINY28V-1AU keyboard controller ATTINY28V-1AU schematic

רכיבים ומונחים קשורים

Microchip Technology ATTINY28V-1AU ATTINY28 ATTINY28V-1AC ATTINY28V-1PI ATTINY28L-4AU ATTINY48-AU 8-bit microcontroller TinyAVR AVR RISC architecture Flash memory general-purpose registers keyboard interrupt analog comparator TQFP-32 TQFP package family surface-mount package embedded control matrix keypad low-power CMOS 1.2 MHz clock MIPS throughput 2 KB Flash memory SMD
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר