Microchip Technology

ATTINY416-SFR 20MHz 4KB Flash AVR MCU | Microchip (Tape & Reel)

MPN: ATTINY416-SFR ✓ פעיל
20-pin SOIC Package 20 MHz Speed 4 KB Memory
כמות הזמנה מינימלית: 1 |

ATTINY416-SFR סקירה

The Microchip Technology ATTINY416-SFR is an 8-bit tinyAVR 1 functional-safety microcontroller with a 20 MHz maximum clock, 4 KB of Flash program memory, 256 B of SRAM, and 128 B of EEPROM in a 20-pin SOIC package. It is built around the AVR 8-bit processor with a hardware multiplier and combines an event system, SleepWalking capability, accurate analog features, and advanced peripherals for compact embedded-control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working data memory, input/output ports, and peripherals on one device. The tinyAVR family occupies the low-power, resource-conscious segment of the broader 8-bit microcontroller market. These devices are commonly used for local sensing, actuator control, communication interfaces, and compact products in which deterministic control and low system complexity matter more than processing throughput.

The ATTINY416-SFR provides 4 KB of in-system reprogrammable Flash, 256 B of SRAM, and 128 B of EEPROM. According to the Microchip ATtiny416/ATtiny816 datasheet, the ATTINY416 Flash is organized as 4K by 16 because all AVR instructions are either 16 or 32 bits wide. The processor can operate at up to 20 MHz, while the ATTINY416-SFR is specified by Microchip as a 16 MHz industrial-temperature device in the 20-pin SOIC configuration.

Its integrated peripherals support general-purpose control without requiring a separate programmable logic device. The event system allows hardware-generated events to trigger peripheral actions, reducing dependence on CPU polling. SleepWalking permits selected peripherals to wake or continue activity while the core sleeps. These features are useful in low-power products that must respond quickly to external activity without maintaining a continuously active CPU.

Typical applications include compact industrial controllers, sensor-hub and condition-monitoring nodes, building and appliance control modules, low-power consumer products, and small motor or actuator-control systems. The combination of event-driven peripherals, serial interfaces, analog resources, and low-power modes makes the device suitable for designs that balance responsiveness, deterministic timing, and compact board area.

A key design consideration is that software, peripheral configuration, clock settings, and pin multiplexing must be coordinated before the design reaches prototype testing. UPDI programming and a separate programming interface should be laid out with test-point access, while unused pins should be terminated according to the final board configuration. Temperature, voltage, and decoupling requirements should follow the manufacturer datasheet and selected package details.

This page organizes the manufacturer's device information, distributor listings, and package-oriented comparison information into an engineering-focused resource. It also identifies the limited drop-in substitution landscape, highlights functional differences among related AVR devices, and provides application and design guidance for evaluating the ATTINY416-SFR in embedded systems.

חלופות תחליף ישיר עבור ATTINY416-SFR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATTINY416-SFR (אותו גורם צורה וטביעת רגל) — שונים ב Product Type.

Microchip Technology
Product Type: 8-bit AVR Flash Microcontroller
השווה עם ATTINY416-SFR →

ATTINY816-SF

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 20-pin SOIC
8-bit AVR Flash Microcontroller · 20 MHz · 8 KB Flash · 512 bytes · 128 bytes · AVR with hardware multiplier · 8 bits · 18 I/O

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATTINY1616-SF

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 20-pin SOIC
Uses the newer tinyAVR 1+ memory architecture and different peripheral organization; exact pin compatibility must be confirmed against its datasheet

📋 חלופה להתייחסות (לא בקטלוג)

ATTINY416-SFR דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit AVR tinyAVR 1 functional-safety microcontroller
תדר שעון מקסימלי 20 MHz
Distributor Rated Clock 16 MHz
Flash Memory 4 KB
Flash Organization 4K x 16
SRAM 256 B
EEPROM 128 B
Processor Core 8-bit AVR with hardware multiplier
מארז 20-pin SOIC
Package Suffix SF
Temperature Grade Industrial, 125 °C
Program Memory Type In-system reprogrammable Flash
Architecture tinyAVR 1
Event System Yes
SleepWalking Yes
Analog Features Accurate analog features

מדריך תצורת פינים של ATTINY416-SFR sf

תצורת פינים עבור ATTINY416-SFR (מארזת sf). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת sf עבור ATTINY416-SFR

אין נתוני פריסת פינים מפורטים עבור ATTINY416-SFR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATTINY416-SFR מתאים עבור 6 יישוםs: Industrial Sensor and Condition Monitoring, Compact Appliance Control Module, Building Control and Smart Sensor Interface, Low-Power Actuator Controller, Embedded Control and Rapid Prototyping, Small Motor and Relay Interface Control.

🏭

Industrial Sensor and Condition Monitoring

The ATTINY416-SFR fits compact sensor nodes that combine an 8-bit AVR controller, 4 KB of Flash, and low-power peripherals in a 20-pin SOIC. Its 20 MHz maximum clock provides sufficient control bandwidth for sampling, filtering, threshold evaluation, and local status handling, while the event system can connect external events to peripheral actions without continuous polling. SleepWalking is valuable in duty-cycled monitors because selected activity can trigger processing while the CPU remains in a low-power state. Design the analog input conditioning around the device's specified ADC and pin limits, and validate the standby and active currents with the complete sensor load attached.

🔧

Compact Appliance Control Module

The ATTINY416-SFR is well suited to appliance subassemblies that coordinate buttons, indicators, relays, and safety-related logic in a small board area. Its 4 KB of in-system-reprogrammable Flash supports compact embedded firmware, and the hardware-multiplier-equipped 8-bit AVR core can handle control logic efficiently. The 20-pin SOIC package provides a conventional, inspectable assembly format and allows analog or timer functions to be assigned alongside digital I/O. For motor or relay loads, keep switching transients away from sensitive traces, use appropriate driver circuitry, and test firmware behavior across all sensor and actuator fault states.

🧩

Building Control and Smart Sensor Interface

The ATTINY416-SFR can serve as a local controller in building-control equipment, receiving commands and converting sensor inputs into actuator or communication outputs. The AVR core runs at up to 20 MHz, allowing responsive digital control, while the event system can reduce latency between peripheral events and firmware responses. Its advanced peripherals support efficient implementation of timers, serial communication, and analog signal conditioning within one controller. Choose the external interface and connector scheme with serviceability in mind, and apply the manufacturer's decoupling and layout guidance to prevent long control or communication lines from coupling noise into sensitive measurements.

⚡

Low-Power Actuator Controller

The ATTINY416-SFR is appropriate for battery-operated actuator controllers where processing must be coordinated with limited energy availability. The event system can connect timer, comparator, or other peripheral events to control actions, reducing software polling, while SleepWalking can support designs that wake the CPU from a low-power state. With 256 B of SRAM and 128 B of EEPROM, the device handles compact control state and persistent configuration without an external memory component. Validate battery life using the actual actuator duty cycle because solenoid, relay, and communication circuits can consume more energy than the MCU itself.

🖥️

Embedded Control and Rapid Prototyping

The ATTINY416-SFR supports educational prototypes and compact embedded-control experiments because it combines a familiar 8-bit AVR architecture with 20 MHz maximum clock performance and a standard 20-pin SOIC package. Its 4 KB of Flash is sufficient for small sensing, timing, and actuator-control demonstrations, while the advanced peripheral set enables event-driven designs without excessive polling. Provide programming access through the interface specified in the manufacturer datasheet and include a labeled programming header or test points so firmware can be updated after assembly. For final deployment, reassess package, temperature grade, and production requirements.

🏭

Small Motor and Relay Interface Control

The ATTINY416-SFR can coordinate timing, sensing, and interlocks in small motor or relay-control boards. Its timer and event resources allow firmware to schedule deterministic switching sequences, while the 8-bit processor handles command decoding and state management. The 20-pin SOIC package leaves room for dedicated driver, protection, and interface circuitry around the controller. Keep high-current paths physically separated from sensitive analog inputs, include appropriate flyback protection, and verify startup, shutdown, overload, and stalled-load behavior. The MCU's operating limits do not replace protection design for the connected load.

סיכום מוצרים מומלצים

ATTINY416 Base family device containing the same tinyAVR 1 architecture בשימוש ב-: Industrial Sensor and Condition Monitoring, Compact Appliance Control Module, Building Control and Smart Sensor Interface, Low-Power Actuator Controller, Embedded Control and Rapid Prototyping, Small Motor and Relay Interface Control ATTINY816 Related family option with additional Flash memory בשימוש ב-: Industrial Sensor and Condition Monitoring, Compact Appliance Control Module, Low-Power Actuator Controller, Small Motor and Relay Interface Control ATTINY104F-SSFR Related tinyAVR controller considered when requirements extend to a different memory configuration בשימוש ב-: Building Control and Smart Sensor Interface, Embedded Control and Rapid Prototyping
What are the key specifications of ATTINY416-SFR that engineers should know?
The ATTINY416-SFR is a 20-pin SOIC microcontroller with a 20 MHz maximum clock, 4 KB of Flash, 256 B of SRAM, and 128 B of EEPROM. Its 8-bit AVR core includes a hardware multiplier, while the device adds an event system, SleepWalking, accurate analog features, and advanced peripherals. According to the Microchip ATtiny416/ATtiny816 datasheet DS40001913B, the 4 KB Flash is organized as 4K by 16 for 16- or 32-bit AVR instructions.
What is the ATTINY416-SFR used for?
The ATTINY416-SFR is used for compact embedded-control systems that require an 8-bit AVR processor, 4 KB of Flash, and integrated low-power peripherals. Typical uses include sensor interfaces, appliance and building controls, small actuator controllers, and industrial condition-monitoring nodes. Its event system and SleepWalking capability allow designs to respond to external activity while limiting unnecessary CPU activity, making it especially useful for battery-conscious or duty-cycled products.
Where can I download the ATTINY416-SFR datasheet PDF?
The official ATTINY416-SFR datasheet can be downloaded from Microchip's ATtiny416/ATtiny816 datasheet PDF at the document URL listed on this page. The document is identified as DS40001913B and covers the ATtiny416 and ATtiny816 family, including the 4 KB and 8 KB Flash configurations. Use that manufacturer document for authoritative electrical characteristics, register definitions, package drawings, and programming requirements.
Where can I find the ATTINY416-SFR pinout?
The ATTINY416-SFR pin configuration is documented in the pin-description tables and package drawing in Microchip's ATtiny416/ATtiny816 datasheet DS40001913B. The part uses the 20-pin SOIC package, with pin 1 identified by the package marking convention and numbering shown in the datasheet. Assign PCB nets directly from those tables, including alternate peripheral functions, power pins, ground pins, and the programming interface.
What is the difference between ATTINY416-SFR and ATTINY816-SF?
The principal documented difference between ATTINY416-SFR and ATTINY816-SF is Flash capacity: the ATTINY416 has 4 KB, while the ATtiny816 provides 8 KB. Both belong to the same tinyAVR family and are covered by the same manufacturer family datasheet. For an existing ATTINY416-SFR board, ATTINY816-SF may be considered only after confirming package pins, memory requirements, power behavior, and application-specific peripheral compatibility.
When should I choose ATTINY416-SFR over ATTINY816-SF?
Choose ATTINY416-SFR when 4 KB of Flash is sufficient and retaining the larger-memory ATtiny816 option is unnecessary. The larger ATtiny816 memory can be valuable when code growth, buffers, protocol libraries, or future features are expected, but it does not automatically make every existing design a drop-in upgrade. Confirm the exact package, pin assignment, clock configuration, peripheral set, and qualification requirements before approving a substitution.
Is ATTINY416-SFR suitable for low-power sensor applications?
The ATTINY416-SFR is suitable for low-power sensor applications because its tinyAVR architecture includes SleepWalking and an event system. These features can reduce the need for continuous CPU polling when sensors, timers, or external signals must be monitored. Actual battery life depends on the selected sleep mode, active peripherals, sampling rate, analog front end, sensor current, and firmware behavior, so the complete application power budget must be measured rather than inferred from the MCU specification alone.
How much power does the ATTINY416-SFR dissipate?
Power dissipation for the ATTINY416-SFR depends on supply voltage, CPU utilization, active peripherals, I/O loading, clock frequency, package, and ambient temperature. A defensible calculation requires the device's operating current and voltage-drop values from the manufacturer datasheet at the actual operating state. In a compact PCB, provide local decoupling and adequate exposed copper according to the package drawing, and validate the hottest operating condition with thermal and power measurements.
Is ATTINY416-SFR in stock and what is its lead time?
Current stock and lead time for ATTINY416-SFR should be requested through the Request a Quote form on this page. Manufacturer inventory can change by package, tube or reel configuration, region, and production schedule, so an online listing alone does not establish guaranteed availability. Include the required quantity, target date, and desired packaging in the request to obtain a procurement response tied to the exact ATTINY416-SFR orderable configuration.
Where can I buy ATTINY416-SFR online?
Use the Request a Quote form on this page to request ATTINY416-SFR availability, commercial terms, and a committed delivery schedule. The request should identify the exact ATTINY416-SFR MPN and required quantity so the order can be evaluated without ambiguity between the 20-pin SOIC device and related ATtiny416 variants in other packages. Current pricing is handled through the quote workflow rather than a static page value.
What is the price of ATTINY416-SFR?
The current ATTINY416-SFR price depends on order quantity, procurement volume, packaging configuration, and market conditions. Submit the quantity and required delivery information through the Request a Quote form on this page for a current commercial response. No static price is stated because market pricing and availability can change independently of the component's technical specifications.
What can replace ATTINY416-SFR?
The ATTINY416-SFR can be replaced only by a device that matches its package footprint, pin functions, memory needs, clock architecture, peripheral configuration, and voltage requirements. Related tinyAVR devices may offer different Flash capacities, package dimensions, or pin assignments, so a similar family name is not enough to establish drop-in compatibility. Use Microchip's cross-reference process and compare the manufacturer datasheets before treating any candidate as a replacement.
What is the best Microchip equivalent for ATTINY416-SFR?
The closest documented family comparison is ATTINY816-SF, which shares the ATtiny416/ATtiny816 datasheet family and increases Flash from 4 KB to 8 KB. Whether it is a drop-in replacement depends on the exact package drawing and pin functions of the selected ordering code. No verified cross-brand equivalent with confirmed pin-for-pin compatibility was identified for this package, so board-level changes should not be assumed.
ATTINY416-SFR vs ATTINY816-SF: which is better for a new design?
ATTINY816-SF is preferable when a new design needs more than 4 KB of Flash, while ATTINY416-SFR is appropriate when 4 KB is sufficient and lower memory use is desirable. The ATtiny816 family offers 8 KB of Flash compared with 4 KB for the ATtiny416. Both devices are covered by Microchip datasheet DS40001913B, making that document the correct basis for a detailed feature and pin comparison.
Is ATTINY416-SFR the same as ATTINY1616-SF?
No. ATTINY416-SFR and ATTINY1616-SF are related Microchip MCUs, but they belong to different tinyAVR families and have different memory architectures. The ATTINY416 uses 4 KB of Flash, 256 B of SRAM, and 128 B of EEPROM, while the ATTINY1616 belongs to the newer tinyAVR 1+ family. Pin, peripheral, and electrical compatibility must therefore be checked rather than inferred from the shared SOIC format.
Is ATTINY416-SFR compliant with RoHS and REACH?
The RoHS and REACH status of ATTINY416-SFR should be confirmed against Microchip's current product declaration or material-compliance documentation for the exact ordering code. The manufacturer and distributor listings identify the device as green, but that description alone should not be expanded into specific regulatory declarations. If a compliance certificate is required for production, request the current declaration before release of the finished assembly.

נתוני עזר הנדסיים עבור ATTINY416-SFR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATTINY416-SFR when a compact 20-pin SOIC design needs an 8-bit AVR core, 4 KB of Flash, 256 B of SRAM, 128 B of EEPROM, and event-driven low-power operation. Select ATTINY816-SF when the firmware footprint may grow and the additional 4 KB of Flash is valuable, after verifying the exact package and pin functions. Consider ATTINY1616-SF for a new design that can use the newer tinyAVR 1+ architecture, but treat it as a design review rather than an automatic replacement because its memory organization and peripherals differ. Do not use ATTINY104F-SSFR as a direct substitute merely because it belongs to the same manufacturer; its listed 12 MHz speed and different package prevent that conclusion. For every substitution, compare the manufacturer datasheets, programming method, power behavior, peripheral mapping, and qualification requirements.

השוואה עם חלופות

פרמטר מוצר זה ATTINY816-SF ATTINY1616-SF
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC
Product Family tinyAVR 1 tinyAVR 1 tinyAVR 1+

מבדילים עיקריים

  • Family-compatible path to double the available Flash (לעומתATTINY816-SF)
  • 20 MHz maximum operating speed for responsive embedded control (לעומתATTINY104F-SSFR)
  • Event-driven and low-power architecture for compact control (לעומתATTINY104F-SSFR)

הערות תכנון

Place the device power pins, decoupling capacitors, ground connection, and programming interface exactly as directed by the manufacturer package drawing and pin-description tables. Route analog inputs away from switching-node and relay-driver traces, and keep the return path for analog ground short and continuous. A compact SOIC footprint does not justify long decoupling loops, because those loops can undermine the low-noise behavior expected from the tinyAVR analog resources.

Budget the power system around both active and sleep states rather than a single nominal current value. The MCU's sleep current, active current, I/O loading, and external sensor load must be combined over the real operating duty cycle. If an actuator is connected, include its startup and hold current in the calculation and provide protection that prevents an overloaded or stalled load from pulling the MCU rail outside its operating limits.

Do not approve a substitute solely because it is labeled tinyAVR or uses a 20-pin SOIC. Compare flash organization, SRAM and EEPROM capacity, clock limits, power pins, programming signals, peripheral multiplexing, and analog functions. The ATTINY816-SF has twice the Flash of the ATTINY416-SFR, while the ATTINY1616-SF uses a different memory architecture; either change can affect firmware layout, startup code, and board assumptions even when the package outline appears similar.

Design the programming connector or pogo-fixture pads before routing the final PCB. Maintain short, repeatable access to the programming interface and avoid placing tall components or enclosure hardware over those pads. For low-power products, verify that floating inputs and unused pins cannot create unintended current paths, and use the datasheet's recommended configurations to prevent an unused input from oscillating and increasing system consumption.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Mouser identifies ATTINY416-SFR as green and industrial temperature grade, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. The part is not presented as an automotive-qualified AEC-Q100 device.

חיפושים קשורים

attiny416 datasheet attiny416 xplained-nano attiny416 mnr attiny416 mfr attiny416 snr attiny416 xplained attiny416 arduino ATTINY416-SFR datasheet pdf ATTINY416-SFR pinout ATTINY416-SFR equivalent ATTINY416-SFR replacement ATTINY416-SFR vs ATTINY816-SF Microchip ATTINY416-SFR price ATTINY416-SFR SOIC20 microcontroller

רכיבים ומונחים קשורים

Microchip Technology ATTINY416-SFR ATTINY416 ATTINY816-SF ATTINY1616-SF ATTINY104F-SSFR tinyAVR 1 tinyAVR 1+ 8-bit microcontroller AVR processor core AVR architecture hardware multiplier in-system reprogrammable Flash event system SleepWalking 256 B SRAM 128 B EEPROM 20 MHz clock 20-pin SOIC surface mount package embedded control sensor monitoring low-power design DS40001913B UPDI
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר