ATTINY861A-PU - 8-bit 20MHz AVR MCU | Microchip Technology
MPN: ATTINY861A-PU ✓ פעילATTINY861A-PU סקירה
An 8-bit AVR microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, I/O ports, timers, and communication peripherals on one chip. Within the Microchip product hierarchy, ATtiny861A belongs to the tinyAVR family of 8-bit RISC microcontrollers, which are designed for compact control tasks, low-power operation, and cost-sensitive embedded products.
Key features include 8 KB of Flash for firmware, 512 bytes of EEPROM for nonvolatile data, 512 bytes of SRAM, 16 general-purpose I/O lines, and 32 general-purpose working registers. The manufacturer describes an 8-bit timer/counter with compare modes and an AVR instruction set with Harvard architecture. Its operating resources make it suitable for compact controllers that need more general-purpose I/O than very small 8-pin devices.
The ATTINY861A uses a separate program-memory and data-memory organization. Firmware occupies the in-system programmable Flash array, while SRAM supports working variables and stack operations. EEPROM retains calibration, configuration, counters, or user settings when power is removed. The 20 MHz maximum clock rate provides sufficient execution bandwidth for digital control, signal generation, timing, and low-speed serial-interface tasks.
Typical uses include compact sensor controllers, LED lighting and dimming modules, small appliance controls, educational automation projects, hobby robotics, simple keypad interfaces, and standalone battery-powered instruments. Designers can use the 16 I/O lines for switches, displays, sensors, actuators, and serial communications without requiring a larger system-on-chip package.
For a new 20-pin DIP layout, preserve the ATtiny861A pin assignments and provide the required power, ground, decoupling, programming, and reset connections described in the manufacturer datasheet. Check every peripheral pin against the selected fuse and clock configuration, and route programming-test or ISP signals away from sensitive analog inputs to reduce coupling.
This product page combines the manufacturer specifications with package guidance, application-oriented design notes, and a practical comparison of documented family alternatives. It focuses on helping engineers evaluate memory, I/O, timing, and tooling requirements before assigning the microcontroller to an embedded-control board.
חלופות תחליף ישיר עבור ATTINY861A-PU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ATTINY461A-PU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY261A-PU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY861A-PU דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit RISC microcontroller |
| Architecture | AVR |
| Series | tinyAVR |
| תדר שעון מקסימלי | 20 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 4K x 16 bits |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| General-Purpose I/O Lines | 16 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit with compare modes |
| מארז | 20-pin DIP |
| Package Pitch | 7.62 mm |
| Package Body Width | 0.300 inch |
| סוג הרכבה | Through-hole |
| Programming | In-system programmable Flash |
תצורת פינים של ATTINY861A-PU
| פין 1 | PB0 — Port B general-purpose I/O pin 0 |
| פין 2 | PB1 — Port B general-purpose I/O pin 1 |
| פין 3 | PB2 — Port B general-purpose I/O pin 2 |
| פין 4 | PB3 — Port B general-purpose I/O pin 3 |
| פין 5 | PB4 — Port B general-purpose I/O pin 4 |
| פין 6 | GND — Ground connection |
| פין 7 | PA6 — Port A general-purpose I/O pin 6 |
| פין 8 | PA7 — Port A general-purpose I/O pin 7 |
| פין 9 | PC7 — Port C general-purpose I/O pin 7 |
| פין 10 | PC6 — Port C general-purpose I/O pin 6 |
| פין 11 | PC5 — Port C general-purpose I/O pin 5 |
| פין 12 | PC4 — Port C general-purpose I/O pin 4 |
| פין 13 | PC3 — Port C general-purpose I/O pin 3 |
| פין 14 | PC2 — Port C general-purpose I/O pin 2 |
| פין 15 | PC1 — Port C general-purpose I/O pin 1 |
| פין 16 | PC0 — Port C general-purpose I/O pin 0 |
| פין 17 | PA3 — Port A general-purpose I/O pin 3 |
| פין 18 | PA4 — Port A general-purpose I/O pin 4 |
| פין 19 | PA5 — Port A general-purpose I/O pin 5 |
| פין 20 | PA2/AVCC — Port A general-purpose I/O pin 2 and analog supply connection |
יישומים טיפוסיים
ATTINY861A-PU מתאים עבור 6 יישוםs: Low-Power Sensor Controller, LED Lighting and Dimming, Small Appliance Control, Educational Robotics Controller, Battery-Powered Instrument, Simple Communications Module.
Low-Power Sensor Controller
ATTINY861A-PU fits a compact sensor node because it combines 16 general-purpose I/O lines, 512 bytes of EEPROM, and an 8-bit AVR core operating up to 20 MHz. The I/O pins can connect switches, sensors, indicators, and an external transceiver without requiring a larger microcontroller package. Its 512 bytes of SRAM and 8 KB of Flash provide room for sampling logic and nonvolatile configuration, although the application must stay within those fixed memory budgets. For battery-powered operation, the firmware should use an appropriate sleep mode, disable unused peripherals, and select the lowest clock frequency that preserves required timing accuracy.
מומלץ
LED Lighting and Dimming
ATTINY861A-PU is suitable for programmable LED lighting and dimming modules where multiple outputs require independent timing or switching control. Its 16 general-purpose I/O lines can drive LED indicators, logic-level transistor gates, or driver-control signals, while the 8-bit timer/counter with compare modes supports periodic events and timing functions. The 8 KB Flash can hold lighting tables, fade algorithms, and communication handling, while 512 bytes of EEPROM can retain brightness levels or scene selections. Validate the PWM method, output drive current, and switching-device dissipation against the specific LED driver rather than driving load current directly from the microcontroller.
מומלץ
Small Appliance Control
ATTINY861A-PU can serve as the central controller in a small appliance where a keypad, status indicators, sensor inputs, and an actuator interface must share one compact processor. Its 20 MHz AVR core supports responsive debouncing, state-machine execution, and periodic control tasks, while 16 I/O lines provide practical connectivity for external modules. The 8 KB Flash accommodates application firmware and lookup tables, and the 512-byte EEPROM preserves settings across power cycles. Designers should include appropriate isolation, flyback protection, and transistor drivers for inductive or high-voltage loads.
מומלץ
Educational Robotics Controller
ATTINY861A-PU works well as an educational robotics controller because it exposes 16 I/O lines while retaining enough Flash for motion logic, sensor fusion, and simple communication routines. The 20 MHz AVR architecture offers straightforward register-level interfacing for common classroom peripherals, and 512 bytes of EEPROM allows calibration values to survive resets. Its 20-pin DIP package is also convenient for breadboard and through-hole prototype construction. For motor control, use external driver circuitry and keep high-current switching paths away from sensitive input traces; the microcontroller should command the driver rather than carry motor current.
מומלץ
Battery-Powered Instrument
ATTINY861A-PU is appropriate for a compact battery-powered instrument that records operating parameters and presents status through a small display or indicator set. The 8 KB Flash can store firmware and compact lookup data, while 512 bytes of EEPROM preserves user settings and calibration constants between sessions. Sixteen I/O lines are sufficient for a display interface, buttons, a measurement input, and a serial link. Because this device does not integrate a high-resolution analog converter, analog measurements require suitable external circuitry; the controller then performs scaling, control, and data handling after the conditioned signal reaches a supported peripheral input.
מומלץ
Simple Communications Module
ATTINY861A-PU can manage a compact communications module that needs protocol formatting, status reporting, and limited local configuration. The AVR core running up to 20 MHz can service byte- or bit-oriented serial tasks, while 16 I/O lines provide hardware handshaking, interrupt inputs, and user controls. Its 8 KB Flash supports a protocol stack and command interpreter, and 512 bytes of EEPROM can retain addresses, calibration, or operating modes. The designer must confirm peripheral timing, interrupt behavior, and logic levels for the selected communication interface before relying on it for a throughput-critical protocol.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATTINY861A-PU — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATTINY461A-PU | ATTINY261A-PU |
|---|---|---|---|
| Package | 20-pin DIP | 20-pin DIP | 20-pin DIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 4 KB | 2 KB |
| EEPROM | 512 bytes | 512 bytes | 128 bytes |
| SRAM | 512 bytes | 256 bytes | 128 bytes |
| General-Purpose I/O Lines | 16 | 16 | 16 |
| General-Purpose Working Registers | 32 | 32 | 32 |
| Timer/Counter | 8-bit with compare modes | 8-bit with compare modes | 8-bit with compare modes |
| Programming | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash |
| Product Family | tinyAVR | tinyAVR | tinyAVR |
מבדילים עיקריים
- Twice the Flash memory of ATTINY461A-PU (לעומתATTINY461A-PU)
- Four times the Flash memory of ATTINY261A-PU (לעומתATTINY261A-PU)
- More SRAM for working data and stack (לעומתATTINY461A-PU)
- Retains the same 16-pin I/O count in a 20-pin DIP footprint (לעומתATTINY461A-PU)
הערות תכנון
Place the required supply bypass capacitors close to the VCC and AVCC pins, following the capacitor values and placement shown in the Microchip family datasheet. Separate analog and digital supply paths where the analog subsystem is used, and keep the AVCC connection clean. Verify that the regulator can supply the combined digital and analog load without excessive ripple during GPIO switching.
Reserve the ISP programming signals and RESET access on the PCB so the firmware can be programmed and recovered after assembly. Route clock, programming, and high-speed switching nets away from sensitive analog inputs. Because the device is a 20-pin DIP, maintain a 7.62 mm pin pitch and provide adequate clearance around the socket or through-hole pads for soldering and rework.
Do not substitute ATTINY461A-PU or ATTINY261A-PU without checking firmware size and retained-data requirements. Their 4 KB and 2 KB Flash capacities are respectively 50% and 75% below the ATTINY861A-PU's 8 KB capacity, and their smaller SRAM can also affect stack and buffer sizing. Rebuild and verify the image for the selected memory configuration before programming.
Assign unused pins according to the manufacturer pin-description table and terminate unused communications inputs so they cannot float during reset. Confirm ISP and reset functions, port multiplexing, and analog input selection before finalizing the schematic. A short ground-return path and locally placed decoupling components are especially important when the DIP device is used on a long prototyping board.
מידע על תאימות
No definitive environmental or automotive qualification statements were identified for the exact ATTINY861A-PU ordering code. Verify compliance with the manufacturer product documentation or a current declaration before release.