Microchip Technology

ATXMEGA128D4-CU - 32MHz 128KB AVR XMEGA MCU | Microchip

MPN: ATXMEGA128D4-CU ✓ פעיל
1.6 V to 3.6 V Vdss 49-pin VFBGA, 5 x 5 mm Package 32 MHz Speed 128 KB Memory
כמות הזמנה מינימלית: 1 |

ATXMEGA128D4-CU סקירה

The Microchip Technology ATXMEGA128D4-CU is a low-power 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 128 KB of in-system-programmable flash, 2 KB of EEPROM, and 8 KB of SRAM in a 49-pin 5 x 5 mm VFBGA package. The device is built around the enhanced AVR RISC architecture and combines read-while-write flash operation with a four-channel event system and a programmable multilevel interrupt controller.

An AVR XMEGA microcontroller is a family of 8/16-bit embedded processors that bridges the gap between simple 8-bit controllers and more complex 16-bit devices. XMEGA devices integrate a Harvard-style RISC core, high-speed timer and counter resources, event routing, serial interfaces, and mixed-signal peripherals into a single low-power design. The ATXMEGA128D4 family is therefore positioned between basic control MCUs and higher-performance 8/16-bit embedded processors.

Key features include 128 KB of ISP flash with an 8 KB boot-code section, read-while-write capability, 2 KB of internal EEPROM, 8 KB of internal SRAM, 34 general-purpose I/O lines, and a 16-bit real-time counter. Four flexible 16-bit timer/counter modules provide compare and PWM channels, while the four-channel event system can route signals between peripherals without requiring continuous CPU polling.

The communication and control peripheral set includes two USARTs and two two-wire serial interfaces. The 32 MHz operating frequency supports deterministic control loops and high-rate peripheral processing, while the AVR instruction set provides a compact programming model with 16-bit registers and an efficient interrupt structure. The manufacturer datasheet also describes the device as combining high performance, low power, and a peripheral-rich architecture.

Typical uses include industrial automation modules, compact data acquisition controllers, motor and position control, industrial networking equipment, and low-power embedded gateways. The 128 KB memory capacity is useful for protocol stacks and application firmware, while the event system can connect timer, comparator, and communication resources for responsive multi-peripheral designs.

When laying out the board, place decoupling capacitors directly beside the supply and ground balls and route all 49 package balls according to the manufacturer land pattern. Because this is a fine-pitch BGA device, inspect the assembled PCB with X-ray or equivalent BGA inspection methods and verify continuity with a flying probe or boundary-scan-compatible test process.

This page combines manufacturer specifications, package details, sourcing information, and engineering guidance for designers evaluating the ATXMEGA128D4-CU in compact embedded control systems. Use the manufacturer pin and package drawings as the authority for board layout, programming, and production inspection.

חלופות תחליף ישיר עבור ATXMEGA128D4-CU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATXMEGA128D4-CU (אותו גורם צורה וטביעת רגל) — שונים ב Package, SRAM, Flash Memory, EEPROM, Boot Code Section.

Microchip Technology
Package: 49-VFBGA, 5 mm x 5 mm
SRAM: 2 KB
Flash Memory: 16 KB (8K x 16)
השווה עם ATXMEGA128D4-CU →
Microchip Technology
Package: 49-VFBGA, 5 mm x 5 mm
EEPROM: 1 KB
השווה עם ATXMEGA128D4-CU →
Microchip Technology
Package: 49-VFBGA (5 x 5 mm)
SRAM: 4 KB
EEPROM: 1 KB
השווה עם ATXMEGA128D4-CU →
Microchip Technology
Package: 49-VFBGA (5x5 mm)
SRAM: 4 KB
Flash Memory: 64 KB (32K x 16)
השווה עם ATXMEGA128D4-CU →

ATXMEGA64D4-CU

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 49-VFBGA (5x5)
8/16-bit AVR XMEGA D4 microcontroller · AVR enhanced RISC · 32 MHz · 64 KB (32K x 16) · 4 KB · Supported · 2 KB · 4 KB

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA32D4-CU

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 49-VFBGA (5x5)
AVR XMEGA D4 · 8/16-bit AVR enhanced RISC · 32 MHz · 32 KB Flash (16K x 16) · 4 KB · In-system programmable with read-while-write capability · 1 KB · 4 KB

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA16D4-CU

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 49-VFBGA (5x5)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 16 KB (8K x 16) · 4 KB · 1 KB · 2 KB · 34 · 4 channels

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA32C4-CU

✅ Drop-In
Microchip Technology
📦 49-VFBGA (5x5)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 32 KB Flash (16K x 16) · 4 KB · 4 KB SRAM · 1 KB · 34 lines · 1.6 V to 3.6 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA128D4-CU דירוגים מרביים ומאפיינים חשמליים

Product Type 8/16-bit AVR XMEGA microcontroller
תדר שעון מקסימלי 32 MHz
Flash Memory 128 KB
Flash Organization 64K x 16
Boot Code Section 8 KB
EEPROM 2 KB
SRAM 8 KB
Supply Voltage Range 1.6 V to 3.6 V
General-Purpose I/O Lines 34
Timer/Counter Modules 4 flexible 16-bit timer/counter modules
Event System 4 channels
Real-Time Counter 16-bit
USART Controllers 2
Two-Wire Serial Interfaces 2
מארז 49-pin VFBGA, 5 x 5 mm
סוג הרכבה Surface mount
Instruction Set AVR enhanced RISC
Interrupt Controller Programmable multilevel interrupt controller
סטטוס RoHS RoHS listed

מדריך תצורת פינים של ATXMEGA128D4-CU 49-pin vfbga, 5 x 5 mm

תצורת פינים עבור ATXMEGA128D4-CU (מארזת 49-pin vfbga, 5 x 5 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 49-pin vfbga, 5 x 5 mm עבור ATXMEGA128D4-CU

אין נתוני פריסת פינים מפורטים עבור ATXMEGA128D4-CU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATXMEGA128D4-CU מתאים עבור 6 יישוםs: Industrial Automation Controller, Data Acquisition and Sensor Hub, Serial Protocol Gateway, Motor and Position Control, Low-Power Embedded Gateway, Programmable Control and Test Equipment.

🏭

Industrial Automation Controller

The ATXMEGA128D4-CU fits compact industrial control modules that must combine protocol handling, deterministic timing, and local data processing. Its 128 KB of flash accommodates application firmware and an 8 KB boot-code section, while 8 KB of SRAM supports protocol buffers and control state. Four flexible 16-bit timer/counter modules provide capture, compare, and PWM resources for encoder inputs, motor timing, and solenoid control. The 34 general-purpose I/O lines also reduce the need for external I/O expanders. Use the 1.6 V to 3.6 V operating range to plan the regulator and protection strategy around the industrial supply rail.

🧩

Data Acquisition and Sensor Hub

The ATXMEGA128D4-CU is appropriate for a multi-sensor data-acquisition hub because its 34 I/O lines can accommodate digital inputs, status indicators, and external converters. The 32 MHz clock provides ample headroom for sampling schedules and short communication transactions, while the four-channel event system can connect timing events with serial or counter resources. Its 2 KB EEPROM is useful for calibration constants and configuration records, and the 128 KB flash leaves room for buffering logic, communication stacks, and field-upgrade support. Place analog front-end circuitry away from high-switching nodes and use the 34 I/O budget carefully when planning multiplexing.

🌐

Serial Protocol Gateway

The ATXMEGA128D4-CU works well in a protocol-conversion gateway because it combines two USARTs with two two-wire serial interfaces and 128 KB of program flash. This allows one module to bridge legacy RS-232 or RS-485 equipment to an embedded network or sensor bus while maintaining local buffering in SRAM. Four 16-bit timer/counter modules can support baud-rate generation, protocol timeouts, and periodic data acquisition. The 1.6 V to 3.6 V range gives designers flexibility around 1.8 V and 3.3 V transceivers, but each serial interface still needs proper line-driver protection, isolation, or termination where the cable environment requires it.

🔧

Motor and Position Control

The ATXMEGA128D4-CU can serve as the controller for small motors, encoders, and position-feedback systems where deterministic timing and PWM resources matter. Its four 16-bit timer/counter modules offer independent compare and PWM channels, allowing encoder capture, velocity measurement, and motor drive timing to coexist. The 32 MHz CPU supports responsive control loops, and the 34 I/O lines can accept limit switches, position sensors, and digital encoder signals. Its 8 KB SRAM is adequate for short control histories, while 128 KB of flash provides room for tuning algorithms and field-service features. Keep switching-node routing away from encoder inputs to prevent timing and accuracy degradation.

📱

Low-Power Embedded Gateway

The ATXMEGA128D4-CU is a strong candidate for compact, low-power embedded gateways that periodically collect information and transmit it over a serial link. Its AVR enhanced RISC architecture provides efficient code density, while the 128 KB flash reduces the need for external storage and supports over-the-air update logic. The event system can coordinate timers, communication activity, and external events so the processor does not need to poll every peripheral continuously. Use the 1.6 V minimum operating voltage to reduce regulator losses in battery or energy-harvested systems, and confirm the active current and wake-up behavior against the application duty cycle.

🖥️

Programmable Control and Test Equipment

The ATXMEGA128D4-CU is useful in compact automated test fixtures and programmable measurement controllers where multiple timing channels and communication ports are required. The four 16-bit timer/counter modules can drive stimulus timing or count test events, while the two USARTs and two two-wire interfaces connect instruments and sensors. With 128 KB of flash, 8 KB of SRAM, and 34 I/O lines, the controller can combine test sequencing, local data capture, and host communication in one device. Use calibrated clock and reference routing for accurate timing, and validate the complete 49-ball BGA assembly electrically because inaccessible solder defects may otherwise appear only during operation.

What is the ATXMEGA128D4-CU?
The ATXMEGA128D4-CU is a Microchip Technology 8/16-bit AVR XMEGA D4 microcontroller operating at up to 32 MHz. It provides 128 KB of in-system-programmable flash, 2 KB of EEPROM, 8 KB of SRAM, 34 general-purpose I/O lines, and four 16-bit timer/counter modules in a 49-pin 5 x 5 mm VFBGA package. According to the Microchip AVR XMEGA D4 Devices Datasheet, the device combines read-while-write flash operation with a four-channel event system and programmable multilevel interrupt controller.
What are the key specifications of ATXMEGA128D4-CU that engineers should know?
The key specifications of the ATXMEGA128D4-CU are a 32 MHz maximum clock, 128 KB of ISP flash, 2 KB of EEPROM, 8 KB of SRAM, a 1.6 V to 3.6 V operating range, and 34 general-purpose I/O lines. It also provides four 16-bit timer/counter modules, two USARTs, and two two-wire serial interfaces. These features make the device suitable for control, communication, timing, and low-power embedded applications requiring more memory than a basic 8-bit AVR.
What is the operating voltage of ATXMEGA128D4-CU?
The ATXMEGA128D4-CU operates from 1.6 V to 3.6 V. This voltage range supports both 1.8 V and 3.3 V system rails when the peripheral configuration and operating frequency allow it. The Microchip product listing identifies the device as a 1.6 V to 3.6 V AVR microcontroller, while the AVR XMEGA D4 Devices Datasheet provides the detailed electrical limits for each voltage and frequency combination.
How much memory does the ATXMEGA128D4-CU have?
The ATXMEGA128D4-CU contains 128 KB of flash memory organized as 64K x 16, plus 2 KB of EEPROM and 8 KB of SRAM. The manufacturer describes an additional 8 KB boot-code section and read-while-write flash capability. This combination provides enough nonvolatile storage for bootloader code and larger application firmware without requiring an external memory device.
What is the ATXMEGA128D4-CU package and pin count?
The ATXMEGA128D4-CU is packaged in a 49-pin VFBGA measuring 5 x 5 mm. Its fine-pitch ball grid array requires a land pattern that matches the Microchip package drawing, along with careful ball assignment and PCB trace routing. Because the library diagram for this exact 49-ball configuration is not available, the manufacturer package drawing should be used to assign every ball, power rail, and exposed function.
Where can I download the ATXMEGA128D4-CU datasheet PDF?
The official ATXMEGA128D4-CU datasheet PDF is available from Microchip Technology through the AVR XMEGA D4 Devices Datasheet link on this page. It covers the ATxmega16D4, 32D4, 64D4, and 128D4 devices, including memory organization, electrical characteristics, peripheral operation, and package information. Use the same document when checking the -CU 49-pin VFBGA variant and its board-level requirements.
Where can I find the ATXMEGA128D4-CU pinout?
The pinout for the ATXMEGA128D4-CU is defined by the 49-pin VFBGA package drawings in the official Microchip AVR XMEGA D4 Devices Datasheet. Use the pin-description table and package drawing together when assigning PCB nets, because several balls can carry alternate peripheral functions. A dedicated BGA-49 diagram is not available in the package-diagram library, so the manufacturer drawings remain the authoritative assignment reference.
Is the ATXMEGA128D4-CU suitable for industrial automation?
Yes, the ATXMEGA128D4-CU is suitable for industrial automation, particularly compact controller and data-acquisition designs. Its 128 KB flash, 8 KB SRAM, 34 I/O lines, four 16-bit timer/counter modules, and two USARTs provide adequate resources for sensor monitoring, actuator timing, and serial equipment control. The 1.6 V to 3.6 V supply range also supports common industrial supply rails when the design uses an appropriate regulator.
What is the best drop-in replacement for ATXMEGA128D4-CU?
The closest same-package options are the ATXMEGA64D4-CU and ATXMEGA32D4-CU from the same AVR XMEGA D4 family. Both use the 49-pin 5 x 5 mm VFBGA format and preserve the core architecture, peripheral structure, and software environment, but they provide less flash than the ATXMEGA128D4-CU. Confirm firmware size, bootloader assumptions, and BGA footprint before treating either part as a replacement.
Can ATXMEGA64D4-CU replace ATXMEGA128D4-CU?
The ATXMEGA64D4-CU can serve as a pin-compatible candidate for the ATXMEGA128D4-CU because both belong to the AVR XMEGA D4 family and use the 49-pin 5 x 5 mm VFBGA package. The important limitation is memory: the replacement offers 64 KB of flash rather than 128 KB. It is therefore appropriate only when the application, including any boot section, fits within 64 KB and the firmware does not depend on the full target memory map.
What is the difference between ATXMEGA128D4-CU and ATXMEGA32C4-CU?
The ATXMEGA128D4-CU and ATXMEGA32C4-CU both appear in a 49-pin VFBGA comparison, but their memory capacities differ substantially. The ATXMEGA128D4-CU provides 128 KB of flash, 2 KB of EEPROM, and 8 KB of SRAM, whereas the ATXMEGA32C4-CU is identified as a 32 KB-flash XMEGA device. Both use the AVR XMEGA RISC architecture at 32 MHz, so software portability is likely, but the target must be rebuilt for the smaller memory map.
When should I choose ATXMEGA128D4-CU instead of ATXMEGA64D4-CU?
Choose the ATXMEGA128D4-CU when application code, data logging buffers, protocol stacks, or a boot loader require more than the 64 KB flash offered by the ATXMEGA64D4-CU. Both parts retain the same package family and peripheral platform, so choosing the 128 KB version preserves memory headroom and avoids firmware relocation. Select the 64 KB part only after confirming the complete linked image, including boot code, fits comfortably below its capacity.
Is the ATXMEGA128D4-CU the same as an ATXMEGA128A4U?
No, the ATXMEGA128D4-CU and ATXMEGA128A4U are not the same package. The -CU suffix identifies the 49-pin VFBGA option, while the ATXMEGA128A4U is offered in a 44-pin package family. Although both belong to the AVR XMEGA 128-class family and may share a broad peripheral architecture, their physical footprints differ, so the ATXMEGA128A4U is not a board-level drop-in replacement for the ATXMEGA128D4-CU.
What is the best Microchip equivalent for ATXMEGA128D4-CU?
The best same-brand equivalent is the ATXMEGA64D4-CU when a smaller memory footprint is acceptable, because it retains the D4 family architecture in the same 49-pin VFBGA format. The ATXMEGA32D4-CU and ATXMEGA32C4-CU provide further memory options in the same package family, but each requires additional firmware validation. Cross-brand pin-identical alternatives are not established for this specific BGA layout and AVR peripheral combination.
How do I design the PCB for an ATXMEGA128D4-CU board?
Design the PCB directly from the Microchip package drawing for the 49-pin, 5 x 5 mm VFBGA. Keep the recommended decoupling network close to the supply and ground balls, route high-speed and sensitive analog signals away from noisy switching paths, and follow the manufacturer guidance for exposed thermal and ground-ball connections. Finished boards should receive X-ray or equivalent BGA inspection because a solder bridge under the array cannot be detected by ordinary visual inspection.
Where can I buy ATXMEGA128D4-CU online and what is its lead time?
Use the Request a Quote form on this page to request current ATXMEGA128D4-CU availability, unit pricing, minimum order quantity, and production lead time. Distributor listings identify the device in a 49-VFBGA package with 128 KB flash, 2 KB EEPROM, and 8 KB SRAM. Because inventory and lead time change by quantity and purchasing conditions, request a written quotation for the exact package suffix and delivery schedule needed for your build.

נתוני עזר הנדסיים עבור ATXMEGA128D4-CU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATXMEGA128D4-CU when the application needs the full 128 KB of flash, 2 KB of EEPROM, 8 KB of SRAM, 34 I/O lines, and the established 49-ball VFBGA footprint. Its four 16-bit timer/counter modules and four-channel event system make it a good fit for industrial control, data acquisition, serial gateways, and compact measurement equipment. The ATXMEGA64D4-CU is the closest same-package option when a 64 KB memory limit is acceptable; it preserves the package and family architecture but halves flash capacity. Consider the ATXMEGA32D4-CU only for compact applications whose code and boot sections fit within 32 KB. The ATXMEGA32C4-CU is less attractive when SRAM or a larger code image matters because its 32 KB flash is one quarter of the target. Verify the final electrical limits, peripheral configuration, firmware memory map, and BGA land pattern against the manufacturer datasheet before releasing a new PCB.

השוואה עם חלופות

פרמטר מוצר זה ATXMEGA64D4-CU ATXMEGA32D4-CU ATXMEGA16D4-CU ATXMEGA32C4-CU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 49-VFBGA (5x5) 49-VFBGA (5x5) 49-VFBGA (5x5) 49-VFBGA (5x5) 49-VFBGA (5x5)
Flash Memory 128 KB 64 KB 32 KB 16 KB 32 KB

מבדילים עיקריים

  • Largest flash capacity among the listed 49-VFBGA AVR XMEGA candidates (לעומתATXMEGA64D4-CU)
  • Substantially larger code-storage margin than the 32 KB C4 option (לעומתATXMEGA32C4-CU)
  • Eight kilobytes of SRAM for local buffering and control state (לעומתATXMEGA64D4-CU)
  • Single established 49-ball footprint family simplifies PCB sourcing (לעומתATXMEGA128A4U)

הערות תכנון

Lay out the 49-ball VFBGA directly from the Microchip package drawing and land pattern. Place the recommended decoupling capacitors adjacent to the relevant supply balls, provide a low-impedance ground plane, and route sensitive analog or timing signals away from switching power stages. Because the balls are hidden after assembly, add X-ray or equivalent BGA inspection and use flying-probe or boundary-scan-compatible electrical verification. A solder bridge beneath the array cannot be detected reliably by visual inspection alone.

Design the supply around the 1.6 V to 3.6 V operating range and check the Microchip electrical-limit tables before selecting the operating frequency and brownout settings. Use local bulk and high-frequency decoupling at the device, and keep the power path short enough to limit voltage drop during current transients. Account for analog and digital load currents separately in the regulator budget, especially when the four timer/counter channels, both USARTs, and both two-wire interfaces are active concurrently.

The 34 I/O lines can carry high-speed timer, serial, and event-system signals, but their usable rise time depends on the external load and board topology. Avoid long stubs, maintain a continuous return path beneath signal routes, and keep clock and high-current outputs separated from analog inputs. For encoder or sensor inputs, use the timer capture resources and isolate sensitive traces from motor-drive switching nodes to preserve timing accuracy and reduce susceptibility to injected noise.

Do not substitute a smaller-flash XMEGA variant without rebuilding and testing the firmware. The ATXMEGA64D4-CU, ATXMEGA32D4-CU, and ATXMEGA16D4-CU can reduce available code and data storage, affecting bootloader placement, application images, and memory-mapped peripherals. Also avoid treating the -CU device as a QFN or TQFP footprint: its 49-ball VFBGA geometry and ball assignment must match the manufacturer drawing before new artwork is released.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LCSC product listing identifies the ATXMEGA128D4-CU as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement was established from the available manufacturer and distributor information.

חיפושים קשורים

ATXMEGA128D4-CU datasheet ATXMEGA128D4-CU specifications ATXMEGA128D4-CU pinout ATXMEGA128D4-CU footprint ATXMEGA128D4-CU 49 VFBGA ATXMEGA128D4-CU equivalent ATXMEGA128D4-CU replacement ATXMEGA128D4-CU vs ATXMEGA64D4-CU ATXMEGA128D4-CU price ATXMEGA128D4-CU stock Microchip ATXMEGA128D4-CU ATXMEGA128D4 128KB 32MHz microcontroller ATXMEGA128D4-CU industrial controller ATXMEGA128D4-CU programming ATXMEGA128D4-CU schematic

רכיבים ומונחים קשורים

Microchip Technology ATXMEGA128D4-CU ATXMEGA128D4 ATXMEGA64D4-CU ATXMEGA32D4-CU ATXMEGA16D4-CU ATXMEGA32C4-CU ATXMEGA128A4U AVR XMEGA AVR enhanced RISC 8/16-bit microcontroller in-system programming read-while-write flash EEPROM SRAM four-channel event system multilevel interrupt controller 16-bit timer/counter USART two-wire serial interface 49-VFBGA 5 x 5 mm BGA package surface mount industrial automation
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר