ATXMEGA384C3-MH - 32MHz 384KB Flash MCU | Microchip Technology
MPN: ATXMEGA384C3-MH ✓ פעילATXMEGA384C3-MH סקירה
An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The AVR XMEGA family belongs to the broader embedded-controller hierarchy and uses an enhanced RISC architecture designed to execute instructions efficiently. Its combination of memory capacity and peripheral integration makes it suitable for embedded control systems that require more local storage than a basic general-purpose microcontroller.
The ATXMEGA384C3-MH provides 384 KB of in-system programmable Flash with read-while-write capability, plus a separate 8 KB boot-code section. A 4 KB EEPROM supports nonvolatile parameter storage, while 32 KB of SRAM provides working memory for control logic, buffers, and communication stacks. The two-channel DMA controller can move data between peripherals and memory, reducing processor involvement in suitable data-transfer operations.
The MCU operates from 1.62 V to 3.6 V and uses the AVR enhanced RISC architecture with a maximum clock frequency of 32 MHz. A 12-bit ADC supports analog measurements, while the 64-QFN package places the device in a compact surface-mount form factor. The industrial-temperature variant is specified for operation from -40 °C to +85 °C, making it appropriate for equipment expected to operate across extended ambient conditions.
Typical uses include industrial sensor controllers, building and access-control equipment, industrial communication gateways, compact data loggers, and embedded control modules. The ATXMEGA384C3-MH is especially useful when firmware, boot code, EEPROM-backed configuration, and moderate SRAM requirements must coexist in one MCU rather than being split across external memory devices.
Board design should preserve the device's low-voltage supply quality and provide decoupling close to the power pins. Firmware should also use the dedicated boot section for controlled startup or field-update workflows and configure DMA only after confirming that the selected peripheral transfers do not conflict with timing-sensitive interrupts.
This page organizes the key MCU specifications, sourcing information, equivalent-device constraints, and application guidance into a practical engineering reference. It also highlights the distinction between genuine pin-compatible replacements and package or temperature-ordering variants that require different assembly or qualification decisions.
חלופות תחליף ישיר עבור ATXMEGA384C3-MH — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותATXMEGA384C3-MH דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| CPU Architecture | AVR enhanced RISC |
| תדר שעון מקסימלי | 32 MHz |
| Program Flash Memory | 384 KB |
| Boot Code Section | 8 KB |
| Total Program Memory | 392 KB including boot section |
| EEPROM | 4 KB |
| SRAM | 32 KB |
| DMA Controller | 2 channels |
| ADC Resolution | 12 bit |
| Minimum Operating Voltage | 1.62 V |
| Maximum Operating Voltage | 3.6 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| מארז | 64-QFN (9 x 9 mm) |
| מספר פינים | 64 pins |
| Flash Read-While-Write | Supported |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של ATXMEGA384C3-MH 64-qfn (9 x 9 mm)
תצורת פינים עבור ATXMEGA384C3-MH (מארזת 64-qfn (9 x 9 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור ATXMEGA384C3-MH.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATXMEGA384C3-MH מתאים עבור 6 יישוםs: Industrial Sensor Controller, Building Access-Control Equipment, Compact Data Logger, Industrial Communication Gateway, Battery-Powered Measurement Module, LED Lighting Controller.
Industrial Sensor Controller
The ATXMEGA384C3-MH fits industrial sensor nodes that combine analog measurement with locally stored configuration and protocol logic. Its 12-bit ADC handles sensor signals, while the 1.62 V to 3.6 V supply range supports low-voltage sensor platforms. The 32 KB of SRAM provides working space for sampling buffers and communication routines, and the two-channel DMA controller can reduce processor intervention during supported peripheral transfers. The 384 KB of Flash leaves room for calibration logic, diagnostics, and communication firmware. For industrial deployment, isolate noisy analog and switching sections on the PCB and verify the full -40 °C to +85 °C system behavior.
מומלץ
Building Access-Control Equipment
ATXMEGA384C3-MH can serve as the control core in access-control readers, credential terminals, and door-control modules that need substantial firmware and nonvolatile configuration. The 384 KB of programmable Flash supports protocol stacks and application features, while 4 KB of EEPROM can retain device identity, calibration values, or operating parameters without consuming SRAM. The dedicated 8 KB boot-code section is useful when implementing controlled startup or update behavior. Its 64-QFN package reduces board area, and the -40 °C to +85 °C range suits indoor equipment exposed to varying temperatures. Firmware must still enforce authentication, update rollback, and secure credential-handling requirements at the system level.
מומלץ
Compact Data Logger
The ATXMEGA384C3-MH is well matched to compact data loggers that must retain event logic, timestamp routines, and communication firmware locally. Its 392 KB combined program-and-boot memory limits pressure on external storage, while 32 KB of SRAM can support temporary record staging. A 12-bit ADC can monitor environmental or analog sensor inputs, and the two-channel DMA controller can assist with data movement where the peripheral mapping permits it. The low 1.62 V minimum operating voltage also helps when powered from small energy-storage systems. Storage media, write endurance, clock accuracy, and battery life must be engineered separately because those constraints are not determined by the MCU specifications alone.
מומלץ
Industrial Communication Gateway
ATXMEGA384C3-MH can act as the protocol-processing MCU in a compact industrial gateway or local controller. The 32 MHz AVR XMEGA core provides deterministic processing for protocol framing and state management, and the large Flash allocation supports multiple communication stacks, diagnostic handlers, and field-upgrade logic. Four kilobytes of EEPROM is useful for storing network identifiers and configuration snapshots, while the two-channel DMA controller may offload supported data movement. The 64-QFN package helps reduce board size in dense controller assemblies. Deployment engineers must verify pin multiplexing, peripheral availability, interrupt priorities, and the electrical interface requirements of each external transceiver before finalizing the gateway architecture.
מומלץ
Battery-Powered Measurement Module
The ATXMEGA384C3-MH can support battery-powered measurement modules because its 1.62 V to 3.6 V operating range accommodates low-voltage systems. The 12-bit ADC supports compact analog instrumentation, while the two-channel DMA controller and 32 KB of SRAM help structure acquisition and processing workloads. Flash provides sufficient room for local calibration, diagnostics, and low-power state-machine logic, reducing the need for an external program-memory device. Energy efficiency depends on the selected sleep modes, active duty cycle, analog front end, and board leakage rather than clock frequency alone. Use the device power-control mechanisms in firmware and measure the complete assembled module across temperature and battery-voltage conditions before defining a service interval.
מומלץ
LED Lighting Controller
ATXMEGA384C3-MH can serve as the supervisory MCU in an LED lighting controller where timing, current regulation, diagnostics, and communications are coordinated locally. The 32 MHz clock and large Flash allocation allow sophisticated control schedules and nonvolatile lighting configuration, while the two-channel DMA controller may support data transfer from compatible peripherals. The 12-bit ADC can monitor the control supply or temperature inputs when the board provides suitable sensing networks. The 64-QFN package helps achieve compact driver assemblies. LED dimming quality depends primarily on the external power stage and its PWM implementation, so the MCU should be assigned timing functions only after confirming timer channels, pin mappings, and required PWM resolution in the manufacturer documentation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATXMEGA384C3-MH — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 64-QFN (9 x 9 mm) |
| Brand | Microchip Technology |
| Maximum Clock Frequency | 32 MHz |
| Program Flash Memory | 384 KB |
| Boot Code Section | 8 KB |
| EEPROM | 4 KB |
| SRAM | 32 KB |
| ADC Resolution | 12 bit |
| Operating Voltage | 1.62 V to 3.6 V |
| Operating Temperature | -40 °C to +85 °C |
מבדילים עיקריים
- Substantial program and boot memory within one MCU (לעומתATXMEGA384C3-AU)
- Industrial-temperature operation in a compact surface-mount package (לעומתATXMEGA384C3-MHR)
- Integrated analog and data-movement resources (לעומתATXMEGA32D4-AUR)
הערות תכנון
Route the 1.62 V to 3.6 V supply through a low-impedance power plane and place the required decoupling capacitors at the nearest supply and ground pins. Keep analog and digital return currents separated until they converge at the device ground reference. Verify the selected regulator's startup behavior, minimum load, and noise performance against the ADC and other precision analog requirements. Firmware should enter the intended low-power mode only after peripheral clocks and conversion sequencing are placed in a defined safe state.
Use the exact 64-QFN land pattern, exposed-pad dimensions, solder-mask rules, and paste pattern defined in the Microchip package documentation. The 9 x 9 mm body leaves little room for routing errors, and the exposed thermal pad requires an uninterrupted ground-copper area with an appropriate via pattern. Match the PCB symbol to the datasheet pin-description table rather than to a generic 64-pin symbol. Confirm pin-1 orientation, exposed-pad connectivity, and assembly tolerances during schematic and layout review.
Do not assume that equal flash capacity makes another ATxmega384C3 ordering code a direct drop-in replacement. ATXMEGA384C3-AU uses a different TQFP package, while ATXMEGA384C3-MHR denotes a closely related reel shipment format. Check the package drawing, pin multiplexing, temperature grade, voltage limits, and assembly format separately. Before committing a replacement to production, compile the original and candidate projects with the intended toolchain and compare boot, interrupt, timer, ADC, DMA, and programming behavior.
Keep the ADC input traces short and shield them from PWM, relay, clock, and high-current switching paths. Place the analog source network near the MCU input when its impedance permits, and return analog ground to the device's quiet ground reference without creating a large loop beneath the QFN body. Because the device supports read-while-write Flash, firmware scheduling must still account for permitted access regions and execution timing. Validate the final board for ADC noise, startup behavior, and supply integrity using the intended clock and operating modes.
מידע על תאימות
The exact ordering code is identified as an industrial-temperature, green device, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited specifications. The -40 °C to +85 °C temperature rating is not an automotive qualification, so AEC-Q100 is treated as not applicable rather than qualified.