Microchip Technology

ATXMEGA64A4U-CU - 32MHz 64KB AVR Microcontroller | Microchip

MPN: ATXMEGA64A4U-CU ✓ פעיל
1.6 V to 3.6 V Vdss 49-VFBGA, 5x5 mm Package 32 MHz Speed 64 KB Memory
כמות הזמנה מינימלית: 1 |

ATXMEGA64A4U-CU סקירה

The Microchip Technology ATXMEGA64A4U-CU is a low-power 8/16-bit AVR XMEGA A4U microcontroller operating up to 32 MHz with 64 KB of self-programming Flash memory, 4 KB SRAM, and 2 KB EEPROM in a 49-VFBGA 5x5 mm package. Its operating supply range is 1.6 V to 3.6 V, and the device includes an external bus interface, four-channel DMA controller, and eight-channel event system.

An 8/16-bit AVR microcontroller is a compact embedded-control semiconductor that combines a processor core, programmable Flash memory, data memory, peripherals, and communication interfaces on one die. The ATXMEGA64A4U-CU belongs to the hierarchy of 8-bit MCU, embedded microcontroller, and semiconductor, combining deterministic 8-bit processing with a 16-bit instruction architecture and higher-performance peripherals for control-oriented embedded systems.

Key features include 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM for persistent configuration data. The 32 MHz operating speed supports responsive control loops, while the four-channel DMA controller reduces CPU intervention during data transfers. The eight-channel event system can route events between peripherals, helping implement timing-sensitive control sequences without relying entirely on software polling.

The device also supports up to 32 general-purpose I/O pins according to the manufacturer product description, enabling dense interface designs without external logic. Its 49-VFBGA package is only 5x5 mm, making it suitable for space-constrained products, although its fine-pitch ball array requires careful PCB layout, assembly, and inspection. The -CU ordering code identifies the green, industrial-temperature device variant listed for a 1.6 V to 3.6 V supply range.

Typical uses include industrial sensor controllers, compact motor-control modules, low-power embedded instruments, communication equipment, and portable measurement products. The combination of internal DMA, an event system, EEPROM, and self-programming Flash is especially useful when data must be transferred or stored locally while the CPU handles control and communications. Developers can update firmware through the supported programming workflow and retain configuration parameters across power cycles.

PCB design should prioritize clean supply distribution and correct ball-grid layout. Place decoupling capacitors close to the supply balls, route sensitive signals away from fast-switching nodes, and follow the manufacturer footprint and assembly guidelines exactly. Firmware replacement should be planned around Flash endurance, bootloader behavior, and the device's supported programming tools.

This product page combines the manufacturer's device capabilities, package and memory details, drop-in family alternatives, comparison data, and practical PCB guidance. It is intended to help engineers confirm footprint compatibility, memory requirements, operating voltage, and migration options before incorporating the ATXMEGA64A4U-CU into a compact embedded-control design.

חלופות תחליף ישיר עבור ATXMEGA64A4U-CU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATXMEGA64A4U-CU (אותו גורם צורה וטביעת רגל) — שונים ב DMA Channels, Event System Channels, External Bus Interface, Package.

Microchip Technology
DMA Channels: 4
Event System Channels: 8
External Bus Interface: Yes
השווה עם ATXMEGA64A4U-CU →

ATXMEGA64A4U-AU

✅ Drop-In
Microchip Technology
📦 49-VFBGA (5x5 mm)
AVR 8/16-bit RISC · AVR XMEGA A4U · 32 MHz (32 MIPS) · 64 KB (32K x 16) · 4 KB · 2 KB · 4 KB · 1.6 V to 3.6 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA64A3U-CU

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 49-VFBGA (5x5 mm)
Same 64 KB Flash class and 49-VFBGA footprint; A3U has 1 KB EEPROM versus 2 KB, a 50% reduction

📋 חלופה להתייחסות (לא בקטלוג)

ATXMEGA64A3U-AU

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 49-VFBGA (5x5 mm)
Same 64 KB Flash class and 49-VFBGA footprint; A3U has 1 KB EEPROM versus 2 KB, a 50% reduction

📋 חלופה להתייחסות (לא בקטלוג)

ATXMEGA32A4U-CU

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 49-VFBGA (5x5 mm)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 32 KB (16K x 16) · Yes · 4 KB · 4 KB · 1 KB · 4 channels

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA32A4U-AU

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 49-VFBGA (5x5 mm)
8/16-bit RISC Flash Microcontroller · AVR enhanced RISC · 32 MHz · 32 KB Flash (16K x 16) · 4 KB Flash · 4 KB · 1 KB · 34

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATXMEGA64A4U-CU דירוגים מרביים ומאפיינים חשמליים

Product Type 8/16-bit AVR XMEGA microcontroller
תדר שעון מקסימלי 32 MHz
Flash Program Memory 64 KB
Flash Organization 32K x 16
Boot Loader Section 4 KB
SRAM 4 KB
EEPROM 2 KB
מתח אספקה פעיל 1.6 V to 3.6 V
מארז 49-VFBGA, 5x5 mm
סוג הרכבה Surface mount
DMA Channels 4 channels
Event System Channels 8 channels
General-Purpose I/O Up to 32 pins
External Bus Interface 1 interface
Self-Programming Flash Supported
Temperature Grade Industrial temperature grade
Environmental Status Green device

מדריך תצורת פינים של ATXMEGA64A4U-CU 49-vfbga, 5x5 mm

תצורת פינים עבור ATXMEGA64A4U-CU (מארזת 49-vfbga, 5x5 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 49-vfbga, 5x5 mm עבור ATXMEGA64A4U-CU

אין נתוני פריסת פינים מפורטים עבור ATXMEGA64A4U-CU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATXMEGA64A4U-CU מתאים עבור 6 יישוםs: Industrial Sensor and Data-Acquisition Controller, Compact Motor-Control Module, Low-Power Portable Measurement Device, Communication and Protocol Gateway, Self-Programmable Embedded Control Product, Embedded Audio and Interface Controller.

🏭

Industrial Sensor and Data-Acquisition Controller

The ATXMEGA64A4U-CU is suitable for compact industrial measurement modules that must collect sensor data, apply calibration, and communicate results over a limited interface. Its four-channel DMA controller can move sampled data without involving the CPU during each transfer, while the eight-channel event system helps coordinate timing-sensitive peripheral events. With 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM, firmware can combine acquisition routines, protocol handling, and persistent calibration parameters. The 1.6 V to 3.6 V operating range also supports low-voltage sensor rails. In a production design, use the manufacturer 49-VFBGA footprint, place decoupling capacitance near the supply balls, and validate interrupt latency under the highest expected acquisition rate.

⚡

Compact Motor-Control Module

The ATXMEGA64A4U-CU can serve as the command processor in a compact stepper, brushless-DC, or actuator-control module where board area is limited. Its 32 MHz clock supports responsive execution of motion routines, and the event system can coordinate timer, DMA, and communication events when deterministic sequencing is required. The 64 KB Flash region accommodates a boot section plus application code, while EEPROM can retain motor settings or calibration values. Four DMA channels can offload data movement between memory and peripherals. The design trade-off is the fine-pitch 49-VFBGA package, which reduces board area but complicates hand rework and inspection. Validate the completed board for motor-generated EMI, thermal conditions, and brownout behavior across the full 1.6 V to 3.6 V supply range.

📱

Low-Power Portable Measurement Device

The ATXMEGA64A4U-CU fits portable instruments that combine a low-power operating rail, local data storage, and a compact display or wired communication interface. Its 1.6 V minimum supply voltage permits operation from low-voltage energy sources, while 4 KB of SRAM and 2 KB of EEPROM provide working and persistent storage for calibration, setup, and measurement history. The self-programming Flash architecture supports field-update workflows when the update mechanism and bootloader are implemented correctly. Low-power operation requires configuring unused pins, clock sources, and peripheral activity deliberately rather than relying only on the controller's sleep modes. Because the package is a 5x5 mm 49-VFBGA, the final assembly should use the exact manufacturer land pattern, controlled soldering profiles, and adequate copper and thermal paths under expected enclosure temperatures.

🌐

Communication and Protocol Gateway

The ATXMEGA64A4U-CU is appropriate for a small protocol gateway that must translate between embedded serial interfaces and manage buffered traffic. The four-channel DMA controller can service independent data streams, reducing the processing burden associated with repeated interrupt-driven transfers. Its eight-channel event system supports event routing among timers, communication peripherals, and DMA channels, while 64 KB of Flash provides room for multiple protocol handlers. The 49-VFBGA package supports dense implementations where connector space is constrained. Engineering attention should focus on deterministic buffer sizing, interrupt priority, and the relationship between DMA activity and the 4 KB SRAM limit. Confirm that the chosen transceiver operates at the same voltage level as the controller or add suitable level translation, and test the completed assembly for conducted and radiated emissions.

🧩

Self-Programmable Embedded Control Product

The ATXMEGA64A4U-CU supports products that need field-updateable firmware without an external programmable Flash device. Its 64 KB self-programming Flash includes a 4 KB boot-code section, allowing a controlled bootloader to verify and install an application update while the 4 KB SRAM supports transient working data and 2 KB of EEPROM stores configuration that must survive power loss. A robust update design must protect bootloader access, manage Flash endurance, recover safely from interrupted writes, and verify the application before activation. The 5x5 mm 49-VFBGA package helps reduce product size but makes programming fixture access and production rework more demanding than a leaded package. Use the exact manufacturer footprint and inspect solder joints carefully after repeated programming or field-return cycles.

🎧

Embedded Audio and Interface Controller

The ATXMEGA64A4U-CU can manage auxiliary control and interface functions in a compact multimedia product, provided its external interface requirements are compatible with the available I/O. Its up to 32 general-purpose pins allow multiple digital controls to be consolidated, and the event system can coordinate timing between timers, DMA channels, and communication peripherals. The 32 MHz operating rate provides a practical balance between control responsiveness and low-power operation, while 64 KB of Flash holds device-specific control code. For an audio-adjacent design, isolate analog and high-current paths from the MCU supply network and use the four-channel DMA feature to buffer data without unnecessary CPU activity. Validate clocking, bus timing, EMI, and enclosure heat because the fine-pitch package has limited thermal and assembly margin compared with larger leaded devices.

What are the key specifications of ATXMEGA64A4U-CU that engineers should know?
The ATXMEGA64A4U-CU is a 32 MHz 8/16-bit AVR XMEGA microcontroller with 64 KB of self-programming Flash, 4 KB of SRAM, 2 KB of EEPROM, and a 1.6 V to 3.6 V supply range. The Microchip product page also identifies a four-channel DMA controller, an eight-channel event system, an external bus interface, and up to 32 general-purpose I/O pins in a 49-VFBGA 5x5 mm package.
Where can I download the ATXMEGA64A4U-CU datasheet PDF?
The official ATXMEGA64A4U datasheet PDF is available from Microchip's device-document server, and the ATXMEGA64A4U product page provides the device overview. The datasheet contains the 49-VFBGA footprint, pin descriptions, electrical characteristics, memory organization, peripheral details, and recommended operating conditions for the A4U family.
Where can I find the ATXMEGA64A4U-CU pinout and package footprint?
The ATXMEGA64A4U-CU pinout is documented in the manufacturer's A4-family datasheet, while the exact ordering code is identified on the ATXMEGA64A4U manufacturer product page. The device uses a 49-VFBGA package with a 5x5 mm footprint. Use the manufacturer land pattern and pin-description table when assigning PCB tracks because the fine-pitch ball-array layout is not represented in a standard package-diagram library.
What memory resources does the ATXMEGA64A4U-CU provide?
The ATXMEGA64A4U-CU provides 64 KB of self-programming Flash organized as 32K x 16, including a 4 KB boot-code section, plus 4 KB of SRAM and 2 KB of EEPROM. According to the Microchip ATXMEGA64A4U product page, the boot section supports protected boot-code organization, while EEPROM retains configuration and calibration information when power is removed.
What is the ATXMEGA64A4U-CU operating voltage range?
The ATXMEGA64A4U-CU operates from 1.6 V to 3.6 V. This range is confirmed by the Mouser listing for the exact ordering code and the manufacturer product family description. The 3.6 V maximum must be observed during design, especially when an external interface or regulator introduces transient overshoot above the nominal rail.
What peripherals are integrated into the ATXMEGA64A4U-CU?
The ATXMEGA64A4U-CU includes a four-channel DMA controller, an eight-channel event system, and an external bus interface, according to the Microchip product page. Its 8/16-bit AVR architecture runs at up to 32 MHz and provides up to 32 general-purpose I/O pins. These resources support responsive acquisition, peripheral event routing, and memory-intensive embedded control without an external coprocessor.
Is ATXMEGA64A4U-CU suitable for low-power embedded products?
Yes, the ATXMEGA64A4U-CU is designed for low-power, high-performance embedded control and accepts a 1.6 V minimum supply. Its sleep and power-management capabilities should be selected through the device's clock, sleep-mode, and peripheral controls in the manufacturer datasheet. Actual product-level consumption depends on the selected clock source, active peripherals, GPIO state, and the percentage of time the application spends in sleep.
Where to buy ATXMEGA64A4U-CU online and how do I request a quote?
Use the Request a Quote form on this page to request ATXMEGA64A4U-CU supply, commercial terms, current lead time, and a volume quotation. Confirm the exact 49-VFBGA package code and industrial-temperature requirements in the request. The form is the appropriate channel for current transaction details rather than relying on a static price table.
What is the price of ATXMEGA64A4U-CU?
The current commercial price for ATXMEGA64A4U-CU should be obtained through the Request a Quote form on this page. A quote should specify the required quantity, 49-VFBGA package, target delivery date, and whether the order must be delivered as trays or another agreed shipment format. This ensures that the quotation applies to the exact ordering code.
What is the lead time and stock status for ATXMEGA64A4U-CU?
Request the current lead time, minimum order quantity, and stock allocation for ATXMEGA64A4U-CU through the Request a Quote form on this page. Lead time can vary with order quantity and manufacturing allocation, so it should be confirmed for each planned build rather than inferred from historical catalog information. Include the production schedule and required quantity in the request.
What is the best drop-in replacement for ATXMEGA64A4U-CU?
ATXMEGA64A4U-AU is the closest same-family drop-in candidate because it retains the 64 KB Flash configuration and 49-VFBGA 5x5 mm footprint while changing the ordering suffix. Before substitution, verify the manufacturer ordering-information table for temperature grade, packing, and exposed-ball details. Firmware and peripheral compatibility must also be checked, and a PCB change is not acceptable for a true drop-in replacement.
What can replace ATXMEGA64A4U-CU without changing the PCB?
A PCB-compatible replacement must use the same 49-VFBGA 5x5 mm footprint, provide compatible power and I/O connections, and offer equivalent memory and peripheral resources. ATXMEGA64A4U-AU, ATXMEGA64A3U-CU, and ATXMEGA64A3U-AU are same-brand family candidates, while ATXMEGA32A4U-CU offers reduced Flash capacity. Confirm each candidate against the manufacturer ordering table and validate the existing firmware before production use.
ATXMEGA64A4U-CU vs ATXMEGA64A4U-AU — which is better for a new design?
ATXMEGA64A4U-CU and ATXMEGA64A4U-AU both belong to the 64 KB A4U family and use the 49-VFBGA 5x5 mm package. The principal distinction is contained in the ordering suffix, so selection should follow the manufacturer ordering-information table for temperature, packing, and shipment requirements. For PCB reuse, ATXMEGA64A4U-AU is the direct family comparison, subject to confirming those suffix-specific attributes.
When should I choose ATXMEGA64A4U-CU over a smaller XMEGA device?
Choose the ATXMEGA64A4U-CU when a design benefits from 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM without moving to a larger package. It also provides a four-channel DMA controller, an eight-channel event system, and up to 32 I/O pins. Select a smaller-memory family member only when its Flash, SRAM, EEPROM, and peripheral requirements remain sufficient for the complete firmware and data workload.
Is ATXMEGA64A4U-CU suitable for industrial control and communication equipment?
Yes, the ATXMEGA64A4U-CU fits compact industrial control, sensor, and communication products because it combines a 1.6 V to 3.6 V supply range, industrial-temperature ordering, 64 KB Flash, four-channel DMA, and an eight-channel event system. The 49-VFBGA footprint saves board area, but designers must use the exact manufacturer land pattern, preserve assembly clearances, and validate EMC and thermal performance in the finished enclosure.
Is ATXMEGA64A4U-CU the same as ATXMEGA64A4U-M7?
No. ATXMEGA64A4U-CU is specified in a 49-VFBGA 5x5 mm package, while the comparison result for ATXMEGA64A4U-M7 does not establish a matching 49-VFBGA footprint. The two ordering codes must not be treated as interchangeable without the manufacturer pin and package tables. Use ATXMEGA64A4U-CU only where a 49-VFBGA land pattern and compatible pin assignment are required.

נתוני עזר הנדסיים עבור ATXMEGA64A4U-CU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATXMEGA64A4U-CU when a compact 5x5 mm industrial design needs 64 KB of self-programming Flash, 4 KB of SRAM, 2 KB of EEPROM, a 32 MHz clock, four DMA channels, and an eight-channel event system. ATXMEGA64A4U-AU is the closest ordering-code alternative and is preferred when its suffix-specific temperature, packing, or shipment configuration better fits the production plan. Use ATXMEGA64A3U-CU or ATXMEGA64A3U-AU only when 1 KB of EEPROM is sufficient; their reduced nonvolatile storage can change the calibration architecture. ATXMEGA32A4U-CU and ATXMEGA32A4U-AU fit the same compact footprint class but halve Flash capacity, so they should be selected only after confirming that the complete firmware, bootloader, and update image fit within 32 KB. For every alternative, verify the manufacturer ordering table, pin mapping, PCB land pattern, boot configuration, and existing firmware compatibility.

השוואה עם חלופות

פרמטר מוצר זה ATXMEGA64A4U-AU ATXMEGA64A3U-CU ATXMEGA64A3U-AU ATXMEGA32A4U-CU ATXMEGA32A4U-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 49-VFBGA (5x5 mm) 49-VFBGA (5x5 mm) 49-VFBGA (5x5 mm) 49-VFBGA (5x5 mm) 49-VFBGA (5x5 mm) 49-VFBGA (5x5 mm)
Architecture 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA 8/16-bit AVR XMEGA
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Program Memory 64 KB 64 KB 64 KB 64 KB 32 KB 32 KB
SRAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
EEPROM 2 KB 2 KB 1 KB 1 KB 2 KB 2 KB
Operating Supply Voltage 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
DMA Controller 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Event System 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels

מבדילים עיקריים

  • Higher Flash capacity within the same 49-VFBGA family footprint (לעומתATXMEGA32A4U-CU)
  • Twice the EEPROM capacity of the A3U alternatives (לעומתATXMEGA64A3U-CU)
  • Direct suffix alternative preserves all headline resources (לעומתATXMEGA64A4U-AU)
  • Four-channel DMA reduces CPU data-movement overhead (לעומתATXMEGA64A4U-AU)

הערות תכנון

Use the manufacturer 49-VFBGA land pattern without substituting a generic BGA footprint. Keep the 1.6 V to 3.6 V supply distribution path short, place local decoupling capacitance directly beside the supply and ground balls, and provide adequate via access around the array. Confirm ball assignments and keep-out requirements against the package drawing before releasing artwork. Fine-pitch assembly also requires compatible stencil, inspection, and rework processes.

Route clocks, high-speed serial interfaces, and event-system signals away from motor-drive nodes, switching regulators, and other likely noise sources. Provide a continuous ground reference beneath signal paths and use the four-channel DMA controller to reduce periodic interrupt-driven I/O activity. For interfaces operating above the MCU's 1.6 V to 3.6 V range, use appropriate level translation and validate setup, hold, and signal-integrity margins at the target clock.

Design the supply rail to remain between 1.6 V and 3.6 V under startup, load transients, and brownout conditions. Account for the controller's active, idle, and sleep consumption rather than assuming one operating condition represents the complete product. Keep analog or external-interface supply branches separated from noisy loads, and confirm that the regulator can start the 49-VFBGA device without violating its specified supply ramp requirements.

Do not assume that suffix-only alternatives have identical temperature grade, packing, or orderable configuration. Check the Microchip ordering-information table for ATXMEGA64A4U-CU, ATXMEGA64A4U-AU, and A3U or A4 family candidates. Firmware written for a 64 KB part may not fit a 32 KB variant, and reducing EEPROM can break calibration or configuration storage. Validate the complete application before approving a substitution.

Although the controller is a low-power device, package temperature depends on the surrounding PCB, airflow, and nearby converters. Provide as much uninterrupted ground copper as the manufacturer footprint permits and avoid placing heat sources directly beneath the fine-pitch array. Validate temperature rise under maximum clock and peripheral activity in the final enclosure. If self-heating or adjacent-source temperature is marginal, derate the design rather than relying only on the ambient rating.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact ordering code is described as a green industrial-temperature device, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product information. AEC-Q100 is not applicable because this is an industrial MCU rather than an automotive-qualified device.

חיפושים קשורים

atxmega64a4u mhr atxmega64a4u datasheet ATXMEGA64A4U-CU datasheet pdf ATXMEGA64A4U-CU pinout ATXMEGA64A4U-CU 49-VFBGA ATXMEGA64A4U-CU replacement ATXMEGA64A4U-CU equivalent ATXMEGA64A4U-CU vs ATXMEGA64A4U-AU ATXMEGA64A4U-CU price ATXMEGA64A4U-CU stock Microchip ATXMEGA64A4U-CU ATXMEGA64A4U 64KB 32MHz ATXMEGA64A4U-CU industrial controller ATXMEGA64A4U-CU footprint

רכיבים ומונחים קשורים

Microchip Technology ATXMEGA64A4U-CU ATXMEGA64A4U ATXMEGA64A4U-AU ATXMEGA64A3U-CU ATXMEGA32A4U-CU AVR AVR XMEGA 8/16-bit microcontroller 8-bit MCU embedded microcontroller semiconductor self-programming Flash boot code section SRAM EEPROM DMA controller event system external bus interface general-purpose I/O 49-VFBGA VFBGA package family surface mount SMD package industrial control sensor acquisition motor control low-power embedded control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר