ATXMEGA64A4U-CU - 32MHz 64KB AVR Microcontroller | Microchip
MPN: ATXMEGA64A4U-CU ✓ Hoạt độngATXMEGA64A4U-CU Tóm tắt
An 8/16-bit AVR microcontroller is a compact embedded-control semiconductor that combines a processor core, programmable Flash memory, data memory, peripherals, and communication interfaces on one die. The ATXMEGA64A4U-CU belongs to the hierarchy of 8-bit MCU, embedded microcontroller, and semiconductor, combining deterministic 8-bit processing with a 16-bit instruction architecture and higher-performance peripherals for control-oriented embedded systems.
Key features include 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM for persistent configuration data. The 32 MHz operating speed supports responsive control loops, while the four-channel DMA controller reduces CPU intervention during data transfers. The eight-channel event system can route events between peripherals, helping implement timing-sensitive control sequences without relying entirely on software polling.
The device also supports up to 32 general-purpose I/O pins according to the manufacturer product description, enabling dense interface designs without external logic. Its 49-VFBGA package is only 5x5 mm, making it suitable for space-constrained products, although its fine-pitch ball array requires careful PCB layout, assembly, and inspection. The -CU ordering code identifies the green, industrial-temperature device variant listed for a 1.6 V to 3.6 V supply range.
Typical uses include industrial sensor controllers, compact motor-control modules, low-power embedded instruments, communication equipment, and portable measurement products. The combination of internal DMA, an event system, EEPROM, and self-programming Flash is especially useful when data must be transferred or stored locally while the CPU handles control and communications. Developers can update firmware through the supported programming workflow and retain configuration parameters across power cycles.
PCB design should prioritize clean supply distribution and correct ball-grid layout. Place decoupling capacitors close to the supply balls, route sensitive signals away from fast-switching nodes, and follow the manufacturer footprint and assembly guidelines exactly. Firmware replacement should be planned around Flash endurance, bootloader behavior, and the device's supported programming tools.
This product page combines the manufacturer's device capabilities, package and memory details, drop-in family alternatives, comparison data, and practical PCB guidance. It is intended to help engineers confirm footprint compatibility, memory requirements, operating voltage, and migration options before incorporating the ATXMEGA64A4U-CU into a compact embedded-control design.
Bộ thay thế dễ dàng lắp đặt cho ATXMEGA64A4U-CU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATXMEGA64A4U-CU (cùng hình factor và footprint) — khác nhau ở DMA Channels, Event System Channels, External Bus Interface, Package.
ATXMEGA64A4U-AU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATXMEGA64A3U-CU
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A3U-AU
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA32A4U-CU
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATXMEGA32A4U-AU
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATXMEGA64A4U-CU Tỷ lệ tối đa & tính chất điện
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Tần số xung maksimum | 32 MHz |
| Flash Program Memory | 64 KB |
| Flash Organization | 32K x 16 |
| Boot Loader Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Điện áp cung cấp hoạt động | 1.6 V to 3.6 V |
| Hộp | 49-VFBGA, 5x5 mm |
| Kiểu lắp đặt | Surface mount |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| General-Purpose I/O | Up to 32 pins |
| External Bus Interface | 1 interface |
| Self-Programming Flash | Supported |
| Temperature Grade | Industrial temperature grade |
| Environmental Status | Green device |
Hướng dẫn cấu hình chân ATXMEGA64A4U-CU 49-vfbga, 5x5 mm
Cấu hình chân cho ATXMEGA64A4U-CU (49-vfbga, 5x5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATXMEGA64A4U-CU.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATXMEGA64A4U-CU phù hợp cho 6 Áp dụngs: Industrial Sensor and Data-Acquisition Controller, Compact Motor-Control Module, Low-Power Portable Measurement Device, Communication and Protocol Gateway, Self-Programmable Embedded Control Product, Embedded Audio and Interface Controller.
Industrial Sensor and Data-Acquisition Controller
The ATXMEGA64A4U-CU is suitable for compact industrial measurement modules that must collect sensor data, apply calibration, and communicate results over a limited interface. Its four-channel DMA controller can move sampled data without involving the CPU during each transfer, while the eight-channel event system helps coordinate timing-sensitive peripheral events. With 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM, firmware can combine acquisition routines, protocol handling, and persistent calibration parameters. The 1.6 V to 3.6 V operating range also supports low-voltage sensor rails. In a production design, use the manufacturer 49-VFBGA footprint, place decoupling capacitance near the supply balls, and validate interrupt latency under the highest expected acquisition rate.
Được đề xuất
Compact Motor-Control Module
The ATXMEGA64A4U-CU can serve as the command processor in a compact stepper, brushless-DC, or actuator-control module where board area is limited. Its 32 MHz clock supports responsive execution of motion routines, and the event system can coordinate timer, DMA, and communication events when deterministic sequencing is required. The 64 KB Flash region accommodates a boot section plus application code, while EEPROM can retain motor settings or calibration values. Four DMA channels can offload data movement between memory and peripherals. The design trade-off is the fine-pitch 49-VFBGA package, which reduces board area but complicates hand rework and inspection. Validate the completed board for motor-generated EMI, thermal conditions, and brownout behavior across the full 1.6 V to 3.6 V supply range.
Được đề xuất
Low-Power Portable Measurement Device
The ATXMEGA64A4U-CU fits portable instruments that combine a low-power operating rail, local data storage, and a compact display or wired communication interface. Its 1.6 V minimum supply voltage permits operation from low-voltage energy sources, while 4 KB of SRAM and 2 KB of EEPROM provide working and persistent storage for calibration, setup, and measurement history. The self-programming Flash architecture supports field-update workflows when the update mechanism and bootloader are implemented correctly. Low-power operation requires configuring unused pins, clock sources, and peripheral activity deliberately rather than relying only on the controller's sleep modes. Because the package is a 5x5 mm 49-VFBGA, the final assembly should use the exact manufacturer land pattern, controlled soldering profiles, and adequate copper and thermal paths under expected enclosure temperatures.
Được đề xuất
Communication and Protocol Gateway
The ATXMEGA64A4U-CU is appropriate for a small protocol gateway that must translate between embedded serial interfaces and manage buffered traffic. The four-channel DMA controller can service independent data streams, reducing the processing burden associated with repeated interrupt-driven transfers. Its eight-channel event system supports event routing among timers, communication peripherals, and DMA channels, while 64 KB of Flash provides room for multiple protocol handlers. The 49-VFBGA package supports dense implementations where connector space is constrained. Engineering attention should focus on deterministic buffer sizing, interrupt priority, and the relationship between DMA activity and the 4 KB SRAM limit. Confirm that the chosen transceiver operates at the same voltage level as the controller or add suitable level translation, and test the completed assembly for conducted and radiated emissions.
Được đề xuất
Self-Programmable Embedded Control Product
The ATXMEGA64A4U-CU supports products that need field-updateable firmware without an external programmable Flash device. Its 64 KB self-programming Flash includes a 4 KB boot-code section, allowing a controlled bootloader to verify and install an application update while the 4 KB SRAM supports transient working data and 2 KB of EEPROM stores configuration that must survive power loss. A robust update design must protect bootloader access, manage Flash endurance, recover safely from interrupted writes, and verify the application before activation. The 5x5 mm 49-VFBGA package helps reduce product size but makes programming fixture access and production rework more demanding than a leaded package. Use the exact manufacturer footprint and inspect solder joints carefully after repeated programming or field-return cycles.
Được đề xuất
Embedded Audio and Interface Controller
The ATXMEGA64A4U-CU can manage auxiliary control and interface functions in a compact multimedia product, provided its external interface requirements are compatible with the available I/O. Its up to 32 general-purpose pins allow multiple digital controls to be consolidated, and the event system can coordinate timing between timers, DMA channels, and communication peripherals. The 32 MHz operating rate provides a practical balance between control responsiveness and low-power operation, while 64 KB of Flash holds device-specific control code. For an audio-adjacent design, isolate analog and high-current paths from the MCU supply network and use the four-channel DMA feature to buffer data without unnecessary CPU activity. Validate clocking, bus timing, EMI, and enclosure heat because the fine-pitch package has limited thermal and assembly margin compared with larger leaded devices.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATXMEGA64A4U-CU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATXMEGA64A4U-AU | ATXMEGA64A3U-CU | ATXMEGA64A3U-AU | ATXMEGA32A4U-CU | ATXMEGA32A4U-AU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 49-VFBGA (5x5 mm) | 49-VFBGA (5x5 mm) | 49-VFBGA (5x5 mm) | 49-VFBGA (5x5 mm) | 49-VFBGA (5x5 mm) | 49-VFBGA (5x5 mm) |
| Architecture | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA | 8/16-bit AVR XMEGA |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB | 32 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 1 KB | 1 KB | 2 KB | 2 KB |
| Operating Supply Voltage | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
Bảo phân biệt quan trọng
- Higher Flash capacity within the same 49-VFBGA family footprint (vsATXMEGA32A4U-CU)
- Twice the EEPROM capacity of the A3U alternatives (vsATXMEGA64A3U-CU)
- Direct suffix alternative preserves all headline resources (vsATXMEGA64A4U-AU)
- Four-channel DMA reduces CPU data-movement overhead (vsATXMEGA64A4U-AU)
Ghi chú thiết kế
Use the manufacturer 49-VFBGA land pattern without substituting a generic BGA footprint. Keep the 1.6 V to 3.6 V supply distribution path short, place local decoupling capacitance directly beside the supply and ground balls, and provide adequate via access around the array. Confirm ball assignments and keep-out requirements against the package drawing before releasing artwork. Fine-pitch assembly also requires compatible stencil, inspection, and rework processes.
Route clocks, high-speed serial interfaces, and event-system signals away from motor-drive nodes, switching regulators, and other likely noise sources. Provide a continuous ground reference beneath signal paths and use the four-channel DMA controller to reduce periodic interrupt-driven I/O activity. For interfaces operating above the MCU's 1.6 V to 3.6 V range, use appropriate level translation and validate setup, hold, and signal-integrity margins at the target clock.
Design the supply rail to remain between 1.6 V and 3.6 V under startup, load transients, and brownout conditions. Account for the controller's active, idle, and sleep consumption rather than assuming one operating condition represents the complete product. Keep analog or external-interface supply branches separated from noisy loads, and confirm that the regulator can start the 49-VFBGA device without violating its specified supply ramp requirements.
Do not assume that suffix-only alternatives have identical temperature grade, packing, or orderable configuration. Check the Microchip ordering-information table for ATXMEGA64A4U-CU, ATXMEGA64A4U-AU, and A3U or A4 family candidates. Firmware written for a 64 KB part may not fit a 32 KB variant, and reducing EEPROM can break calibration or configuration storage. Validate the complete application before approving a substitution.
Although the controller is a low-power device, package temperature depends on the surrounding PCB, airflow, and nearby converters. Provide as much uninterrupted ground copper as the manufacturer footprint permits and avoid placing heat sources directly beneath the fine-pitch array. Validate temperature rise under maximum clock and peripheral activity in the final enclosure. If self-heating or adjacent-source temperature is marginal, derate the design rather than relying only on the ambient rating.
Thông tin tuân thủ
The exact ordering code is described as a green industrial-temperature device, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product information. AEC-Q100 is not applicable because this is an industrial MCU rather than an automotive-qualified device.