onsemi

CD4060BCN - 14-Stage Counter and Oscillator | onsemi

MPN: CD4060BCN ✓ פעיל
3.0 V to 15 V Vdss 16-lead PDIP Package Negative-edge triggered Speed
כמות הזמנה מינימלית: 1 |

CD4060BCN סקירה

The onsemi CD4060BCN is a 14-stage ripple-carry binary counter and oscillator integrated circuit operating from 3.0 V to 15 V, with 14 counter stages, negative-edge clocking, and a 16-lead PDIP package. It combines an internal oscillator, asynchronous reset, and multiple frequency-division outputs in one CMOS logic device.

A binary counter is a sequential digital circuit that records a number of clock events as binary bits. The CD4060BCN belongs to the CD4000 CMOS logic family and advances on each negative transition of its clock input. Its oscillator can use an external resistor-capacitor network or crystal, while the counter stages provide divided clock outputs for timing and frequency-generation circuits.

The device operates across a 3.0 V to 15 V supply range and features high noise immunity of 0.45 VDD typical. Its asynchronous reset is independent of the clock and returns the counter to zero when the reset input is driven to a logical 1. The integrated oscillator and divider architecture reduce the number of external components required in timer, pulse-generator, and low-frequency clock circuits.

The CD4060BCN uses a ripple-carry implementation, so each internal stage transitions after the preceding stage. This structure is useful when multiple divided frequencies are required, but timing edges at the higher-count outputs include accumulated propagation delay. Clock-driven designs benefit from a clean negative edge at the clock input. When oscillator accuracy or stability is important, component tolerances and parasitic capacitance must be considered alongside the external RC or crystal network.

Typical uses include RC or crystal oscillators, binary frequency dividers, periodic pulse generators, interval timers, low-frequency clock sources, and sequential control systems. The 16-lead PDIP package supports through-hole assembly and prototyping, while its 3.0 V to 15 V operating range accommodates legacy CMOS logic systems operating at 5 V or 15 V.

When designing a divider, confirm that the selected output frequency meets the required timing accuracy and that the reset pulse is clean. Decoupling capacitors should be placed close to the supply pins, and unused counter outputs should remain properly terminated. This page consolidates operating characteristics, drop-in alternatives, comparison data, and application-focused design guidance for CD4060BCN selection.

חלופות תחליף ישיר עבור CD4060BCN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם CD4060BCN (אותו גורם צורה וטביעת רגל) — שונים ב Logic Family, Supply Voltage Range.

Texas Instruments
Logic Family: CMOS
Supply Voltage Range: 3 V to 18 V
השווה עם CD4060BCN →

CD4060BC

✅ Drop-In
📦 16-lead PDIP
Same 14-stage counter function and 16-pin footprint; package qualification and temperature grade require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

HCF4060BEY

✅ Drop-In
📦 16-lead PDIP
Same 14-stage counter/divider function; supply range extends to 20 V versus the CD4060BCN's 15 V maximum.

📋 חלופה להתייחסות (לא בקטלוג)

HEF4060BP

✅ Drop-In
📦 16-lead PDIP
Same 14-stage 4000-series counter function and 16-pin DIP footprint; timing and temperature limits require comparison.

📋 חלופה להתייחסות (לא בקטלוג)

CD4060BEX

✅ Drop-In
📦 16-lead PDIP
Same 14-stage binary-counter category and PDIP-16 footprint; electrical limits and availability require final qualification.

📋 חלופה להתייחסות (לא בקטלוג)

CD4060BCN דירוגים מרביים ומאפיינים חשמליים

Counter Type 14-stage ripple-carry binary counter
Supply Voltage Range 3.0 V to 15 V
Clock Edge Negative-edge triggered
Reset Type Asynchronous, active-high
Noise Immunity 0.45 VDD typical
Counter Output Count 14 stages
Oscillator On-chip RC or crystal oscillator
Logic Family CD4000 CMOS series
מארז 16-lead PDIP
Package Width 0.300 in
Package Standard JEDEC MS-001
סוג הרכבה Through-hole

תצורת פינים של CD4060BCN

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
פין 1 OSC1 — Oscillator input and external timing-network connection
פין 2 OSC2 — Oscillator output and external timing-network connection
פין 3 MR — Asynchronous master reset input
פין 4 Q4 — Divided counter output
פין 5 Q5 — Divided counter output
פין 6 Q6 — Divided counter output
פין 7 Q7 — Divided counter output
פין 8 Q8 — Divided counter output
פין 9 Q9 — Divided counter output
פין 10 Q10 — Divided counter output
פין 11 Q11 — Divided counter output
פין 12 Q12 — Divided counter output
פין 13 Q13 — Divided counter output
פין 14 Q14 — Divided counter output
פין 15 VSS — Ground reference
פין 16 VDD — Positive supply input

יישומים טיפוסיים

CD4060BCN מתאים עבור 6 יישוםs: Low-Frequency RC Oscillator, Crystal-Based Clock Source, Frequency Divider, Periodic Pulse Generator, Asynchronous System Timer, Legacy CMOS Control Logic.

⚡

Low-Frequency RC Oscillator

The CD4060BCN suits low-frequency oscillator designs because it combines an internal oscillator section with a 14-stage counter. An external resistor-capacitor network establishes the nominal oscillation frequency, while the divided outputs provide several lower-frequency signals from the same source. Because the device operates from 3.0 V to 15 V and offers 0.45 VDD typical noise immunity, it is useful for legacy CMOS timer and clock circuits. During component selection, account for resistor and capacitor tolerances, parasitic capacitance, temperature drift, and oscillator startup. Select the output stage according to the required frequency and acceptable divider delay rather than assuming every output has identical timing accuracy.

🌐

Crystal-Based Clock Source

The CD4060BCN can operate as a crystal-based clock generator when the oscillator section is connected to the appropriate crystal and supporting network. The divided counter outputs then supply lower-frequency timing references for digital control, communication, or sequencing systems. Its 3.0 V to 15 V supply range permits operation in conventional CMOS environments, while the 16-lead PDIP package makes the circuit straightforward to prototype and service. Because the counter advances on each negative clock transition, the input clock edge quality directly affects the stability and jitter of divided outputs. Validate crystal startup across temperature and supply voltage, confirm the manufacturer's recommended load capacitance, and check timing margins for the selected divider stage.

🖥️

Frequency Divider

The CD4060BCN provides 14 ripple-carry stages for dividing an input frequency into lower, selectable rates. This makes it useful for clock division, pulse-rate reduction, and periodic event generation in legacy CMOS logic systems. The output taps allow a designer to choose a division factor that fits the required timing without adding a separate counter for every ratio. Since the implementation is ripple carry, later stages accumulate the propagation delay of preceding stages. Use the earliest divider output that meets the frequency requirement, allow sufficient edge settling time, and verify the maximum operating frequency of the selected source when the clock is supplied externally rather than generated internally.

🏭

Periodic Pulse Generator

A CD4060BCN oscillator can generate a continuous reference that is divided into periodic pulses for timers, indicators, sampling triggers, and basic sequencing systems. The internal oscillator reduces the component count compared with a discrete RC oscillator followed by a separate divider, while the 16-lead PDIP package provides a practical through-hole implementation. The asynchronous reset offers a way to force the counter to a known state when a system event occurs. Design the reset pulse to satisfy the device's logic and timing requirements, avoid retriggering during normal operation, and account for RC tolerances if multiple devices must operate at matching frequencies. Select an output stage based on pulse-width and edge-timing requirements.

🔧

Asynchronous System Timer

The asynchronous reset of the CD4060BCN is useful in timer and event systems that must return to a known count immediately rather than waiting for a clock edge. A logical 1 at the reset input clears the counter regardless of oscillator state, allowing an external event, supervisor, or controller to establish a defined starting point. The device's 3.0 V to 15 V operating range supports common industrial CMOS control voltages, while typical noise immunity of 0.45 VDD assists with electrically noisy environments. Keep reset traces short, provide a defined inactive level, and ensure that the reset source does not introduce excessive leakage or timing skew. Verify the complete timing budget against the highest counter stage used by the system.

🛠️

Legacy CMOS Control Logic

The CD4060BCN is appropriate for maintenance and modernization of legacy CMOS systems that use 4000-series counter functions around 5 V or 15 V supplies. Its 16-lead PDIP footprint supports through-hole replacement and reduces the effort required to preserve existing board layouts. The 14-stage architecture offers multiple division taps, while the internal oscillator supports standalone timing where an external clock is unnecessary. Before fitting a replacement, compare reset behavior, clock polarity, maximum frequency, output timing, temperature grade, and oscillator recommendations with the incumbent device. For long-term production, qualify the selected source and verify regulatory declarations for the target equipment rather than assuming identical lifecycle or environmental status.

סיכום מוצרים מומלצים

CD4060BC Pin-compatible oscillator and counter alternative בשימוש ב-: Low-Frequency RC Oscillator, Frequency Divider, Asynchronous System Timer HCF4060BEY 14-stage oscillator and divider alternative בשימוש ב-: Low-Frequency RC Oscillator, Frequency Divider, Asynchronous System Timer, Legacy CMOS Control Logic HEF4060BP Pin-compatible crystal oscillator and divider alternative בשימוש ב-: Crystal-Based Clock Source, Periodic Pulse Generator, Legacy CMOS Control Logic CD4060BEX Same-package binary oscillator alternative בשימוש ב-: Crystal-Based Clock Source, Periodic Pulse Generator, Legacy CMOS Control Logic
What is the CD4060BCN and what does it do?
The CD4060BCN is a 14-stage ripple-carry binary counter with an internal oscillator and asynchronous reset. According to the manufacturer datasheet, the counter advances on each negative transition of the clock pulse and provides divided outputs for timer, oscillator, and frequency-divider circuits. The device operates from 3.0 V to 15 V and is packaged in a 16-lead PDIP.
What is the supply voltage range of CD4060BCN?
The CD4060BCN operates from 3.0 V to 15 V. This wide CMOS supply range supports both 5 V and 15 V legacy logic systems, as well as lower-voltage designs where appropriate. The manufacturer datasheet also identifies a typical noise-immunity rating of 0.45 VDD, which helps the counter tolerate a significant portion of the supply voltage as noise on its digital inputs.
How many counter stages does CD4060BCN contain?
The CD4060BCN contains 14 ripple-carry counter stages. Its internal counter advances on the negative transition of each clock pulse, and the available divided outputs support a broad division range. The manufacturer datasheet identifies the CD4060BC as a 14-stage binary counter, distinguishing it from the related CD4040BC, which uses a 12-stage counter implementation.
Where can I download the CD4060BCN datasheet PDF?
The CD4060BCN manufacturer datasheet is available through the official datasheet link on this page. It documents the 3.0 V to 15 V supply range, 14-stage counter, negative-edge operation, asynchronous reset, oscillator connections, electrical characteristics, and the 16-lead PDIP physical dimensions. Use the pin-description table and package drawing when assigning PCB connections or selecting external oscillator components.
Where is the CD4060BCN pinout and pin 1 location?
The CD4060BCN uses a standard 16-lead PDIP pin arrangement. The manufacturer datasheet identifies pin 1 as OSC1, pin 2 as OSC2, pin 3 as the master reset, pins 4 through 14 as divided outputs, pin 15 as VSS, and pin 16 as VDD. The physical drawing identifies the pin-1 end of the package, allowing the PCB footprint to be aligned without relying on pin numbering alone.
How does the CD4060BCN reset input work?
A logical 1 at the CD4060BCN reset input returns the counter to its zero state independently of the clock signal. The manufacturer datasheet describes this as an asynchronous reset, meaning the reset action does not wait for a clock transition. When resetting is generated asynchronously, keep the pulse clean and avoid leaving the reset input floating, particularly in environments with substantial electrical noise.
Can CD4060BCN replace CD4060BC without changing the PCB?
The CD4060BC is identified as a pin-compatible version of the CD4060BCN in the available cross-reference information. Both devices use the 16-lead PDIP configuration and implement the same 14-stage binary-counter function. Final qualification should still confirm supply limits, temperature grade, oscillator startup behavior, and production status for the specific source selected for the replacement.
What is the best STMicroelectronics equivalent for CD4060BCN?
The HCF4060BEY from STMicroelectronics is the closest listed alternative because it is a 14-stage counter/divider in a 16-lead DIP configuration. Its wider 3 V to 20 V operating capability provides additional supply headroom compared with the CD4060BCN's 3.0 V to 15 V range. Verify oscillator-component recommendations, output timing, and temperature limits against the HCF4060BEY datasheet before approving the substitution.
Can HEF4060BP replace CD4060BCN in a 16-pin DIP design?
The HEF4060BP can be considered as a drop-in candidate because it is listed as a 14-stage 4000-series counter in a 16-lead DIP package. It is functionally close to the CD4060BCN, but engineers should compare supply voltage, noise immunity, timing, temperature range, and oscillator startup requirements in the relevant manufacturer datasheets. The pin-compatible package alone does not guarantee identical timing margins in every design.
When should I choose CD4060BCN instead of HCF4060BEY?
Choose the CD4060BCN when the design is constrained to the familiar 3.0 V to 15 V operating range and has an established 16-lead CD4000-series footprint. Choose the HCF4060BEY when its wider 3 V to 20 V operating capability is beneficial and the associated timing and component-selection requirements have been validated. Both provide a 14-stage ripple-carry counter/divider function in a 16-lead DIP.
Is CD4060BCN suitable for an RC oscillator application?
Yes, the CD4060BCN is suitable for an RC oscillator because it includes an internal oscillator section that can be connected to external timing components. The manufacturer datasheet identifies external RC or crystal oscillator options. Component tolerance, parasitic capacitance, temperature coefficient, and startup behavior determine the practical frequency accuracy, so the timing network should be evaluated across its intended voltage and temperature range.
What are the trade-offs of using a ripple-carry counter?
A ripple counter provides multiple divided outputs with a straightforward implementation, but each stage changes only after the preceding stage. The manufacturer identifies CD4060BCN as a 14-stage ripple-carry counter, so accumulated propagation delay can affect timing at later outputs. For a fixed-frequency reference, use the lowest-numbered suitable output; for multiphase or precisely timed outputs, verify skew and rise-time requirements.
Where can I request a quote and current lead time for CD4060BCN?
Use the Request a Quote form on this page to request the current CD4060BCN price, stock position, minimum order quantity, and lead time. The form is the appropriate route for a transaction based on current production status, package quantity, and delivery requirements. It also allows the requested quantity and target shipment information to be communicated without relying on a static price or stock statement.
Is CD4060BCN in stock and how long is the lead time?
Current CD4060BCN stock and lead time should be confirmed through the Request a Quote form on this page. Availability can vary with the exact manufacturer, packaging quantity, and order volume, while lead time depends on supplier inventory and production scheduling. Include the required quantity, target delivery date, and acceptable tube or reel packaging details in the request.
What are the key CD4060BCN specifications engineers should know?
The key CD4060BCN specifications are a 3.0 V to 15 V supply range, 14 ripple-carry counter stages, negative-edge clock operation, asynchronous active-high reset, internal RC or crystal oscillator capability, and a 16-lead PDIP package. The manufacturer datasheet also states typical noise immunity of 0.45 VDD. These parameters define its suitability for CMOS timers, dividers, oscillators, and pulse-generation circuits.

נתוני עזר הנדסיים עבור CD4060BCN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose CD4060BCN for a 16-pin CD4000-series oscillator or counter design that operates within 3.0 V to 15 V and needs negative-edge counting with asynchronous reset. Choose CD4060BC when an identical onsemi-family footprint and function are required, subject to confirmation of package qualification and operating limits. Choose HCF4060BEY when the broader 3 V to 20 V supply range provides useful design headroom. Choose HEF4060BP for a 14-stage 4000-series counter/divider in a 16-pin DIP when its timing and temperature characteristics better match the application. Choose CD4060BEX when its particular source qualification and availability satisfy the production program. Because these parts are ripple counters, later outputs accumulate stage delay; select the earliest divider output that meets the required timing and verify oscillator startup, maximum frequency, reset behavior, temperature range, and lifecycle status before releasing a design.

השוואה עם חלופות

פרמטר מוצר זה CD4060BC HCF4060BEY HEF4060BP CD4060BEX
Brand onsemi onsemi STMicroelectronics NXP Semiconductors Harris
Package 16-lead PDIP 16-lead PDIP 16-lead PDIP 16-lead PDIP 16-lead PDIP
Counter Stages 14 stages 14 stages 14 stages 14 stages 14 stages
Counter Architecture Ripple-carry binary counter Ripple-carry binary counter Counter/divider 14-stage counter Binary counter
Oscillator On-chip RC or crystal oscillator On-chip RC or crystal oscillator Oscillator/counter Oscillator/counter Oscillator/counter
Logic Family CD4000 CMOS CD4000 CMOS 4000 series CMOS 4000 series CMOS 4000 series CMOS

מבדילים עיקריים

  • Direct same-footprint replacement path (לעומתCD4060BC)
  • Higher maximum supply voltage (לעומתHCF4060BEY)
  • Established CD4000-series oscillator and divider architecture (לעומתHEF4060BP)

הערות תכנון

Place the decoupling capacitor between pins 16 and 15 with its ground end connected to the nearest solid ground reference. Keep the oscillator timing network at pins 1 and 2 short and away from high-current switching nodes. For a crystal oscillator, route the oscillator path away from digital output and reset traces, and follow the manufacturer's recommended grounding and load-capacitance arrangement. This separation reduces clock jitter, unintended oscillator feedback, and sensitivity to board-level electrical noise.

Use a clean low-jitter external clock when accurate division is required. The CD4060BCN advances on the negative clock transition, so crossing the threshold with excessive noise or slow edges can cause inconsistent counting. Select the earliest divided output that satisfies the required frequency, provide adequate settling time after reset, and verify the timing of the final output stage. This is particularly important for the highest-order outputs because ripple delay accumulates through successive stages.

Do not leave the oscillator, clock, or asynchronous reset inputs floating. The master reset at pin 3 must be returned to a defined inactive level, while oscillator pins 1 and 2 must have a complete timing network. Also confirm that the chosen CD4060BCN source operates at the voltage, temperature, and frequency required by the design. A 16-pin package match alone does not resolve timing-grade or environmental qualification requirements.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the manufacturer information.

חיפושים קשורים

CD4060BCN datasheet CD4060BCN pinout CD4060BCN datasheet pdf CD4060BCN equivalent CD4060BCN replacement CD4060BCN cross reference CD4060BCN vs HCF4060BEY CD4060BCN 16-pin DIP footprint CD4060BCN application circuit CD4060BCN price CD4060BCN stock onsemi CD4060BCN

רכיבים ומונחים קשורים

onsemi Fairchild Semiconductor CD4060BCN CD4060BC HCF4060BEY HEF4060BP CD4060BEX binary counter ripple-carry counter counter divider CMOS logic CD4000 series logic IC integrated circuit semiconductor 14-stage counter negative-edge triggered asynchronous reset RC oscillator crystal oscillator frequency divider timer pulse generator 16-lead PDIP DIP package through-hole mounting 3.0 V to 15 V 0.45 VDD noise immunity
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר