Texas Instruments

DS90CF364AMTDX - 18-Bit 65MHz LVDS Receiver | Texas Instruments

MPN: DS90CF364AMTDX ✓ פעיל
3.3 V Vdss 48-pin TSSOP (DGG) Package 65 MHz Speed
כמות הזמנה מינימלית: 1 |

DS90CF364AMTDX סקירה

The Texas Instruments DS90CF364AMTDX is a 3.3 V LVDS flat-panel-display receiver supporting an 18-bit data interface at up to 65 MHz in a 48-pin TSSOP package. It is designed for systems that transfer display-related data across a noise-resistant differential link.

An LVDS receiver is an interface integrated circuit that converts low-voltage differential signaling into a logic-level digital signal. LVDS belongs to the broader differential-interface hierarchy and is commonly used where reliable data transfer, low electromagnetic interference, and scalable clock rates are important. The DS90CF364A family targets flat-panel-display links connecting a transmitter or display source to a receiver endpoint.

The key operating characteristics are a 3.3 V supply, an 18-bit FPD link, and a maximum signaling frequency of 65 MHz. The 48-pin TSSOP package provides a conventional surface-mount footprint suitable for multilayer PCB designs. The operating-temperature range shown on the manufacturer part-details page is -10 °C to 70 °C, making the device appropriate for commercial and industrial equipment with controlled ambient conditions.

The receiver architecture is intended to recover data from LVDS differential pairs and present compatible parallel digital signals to the connected display system. Its 65 MHz signaling rate establishes the timing envelope for the associated data lanes, while the 18-bit interface supports parallel display-related information. Designers must preserve controlled-impedance routing between the transmitter and receiver, maintain the required input termination, and observe the voltage and timing constraints defined by the manufacturer.

Typical uses include flat-panel display controllers, industrial display equipment, video timing interfaces, monitor electronics, and embedded human-machine-interface systems. In these applications, the DS90CF364AMTDX can serve as the receiving endpoint for an LVDS FPD link, reducing susceptibility to common-mode noise when compared with a single-ended transfer path.

PCB implementation should provide continuous ground planes, short differential traces, matched pair lengths, and proper LVDS input termination. The receiver should be placed according to the package and datasheet layout guidance, with supply decoupling and signal-return paths arranged to minimize switching noise. Component substitutions should be checked for identical pin functions, supply requirements, clock capability, and electrical timing rather than package name alone.

This product page combines the manufacturer's ordering information, interface specifications, package details, drop-in replacement references, application guidance, and a parameter-by-parameter comparison. It is intended to help engineers identify the correct receiver and verify PCB, timing, thermal, and sourcing constraints before committing a design to production.

חלופות תחליף ישיר עבור DS90CF364AMTDX — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

DS90CF364MTDX/NOPB

✅ Drop-In
📦 48-TSSOP (DGG)
Same 18-bit, 65 MHz receiver function and 48-pin TSSOP interface; no stated functional difference requiring PCB modification.

📋 חלופה להתייחסות (לא בקטלוג)

DS90CF364AMTDX/NOPB

✅ Drop-In
📦 48-TSSOP (DGG)
Same 3.3 V, 18-bit, 65 MHz receiver and identical 48-pin TSSOP footprint; differs only in the documented orderable suffix.

📋 חלופה להתייחסות (לא בקטלוג)

DS90CF364AMTDX מפרטים

Product Type LVDS FPD Receiver
מתח אספקה 3.3 V
Interface Width 18 bits
Maximum Signaling Frequency 65 MHz
Logic Standard LVDS
Application Flat Panel Display Link
מארז 48-pin TSSOP (DGG)
מספר פינים 48 pins
סוג הרכבה Surface Mount
טווח טמפרטורת פעולה -10 °C to 70 °C

מדריך תצורת פינים של DS90CF364AMTDX 48-pin tssop (dgg)

תצורת פינים עבור DS90CF364AMTDX (מארזת 48-pin tssop (dgg)). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 48-pin tssop (dgg) עבור DS90CF364AMTDX

אין נתוני פריסת פינים מפורטים עבור DS90CF364AMTDX.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

DS90CF364AMTDX מתאים עבור 6 יישוםs: Industrial Flat-Panel Display Receiver, Monitor Electronics, Video Timing Interface, Human-Machine Interface Display, Embedded Display Controller, Digital Signage Interface.

📺

Industrial Flat-Panel Display Receiver

The DS90CF364AMTDX fits the receiving end of an industrial flat-panel display link because it accepts an 18-bit differential FPD interface at up to 65 MHz using a 3.3 V supply. It can terminate an LVDS link from a display controller and present parallel data to downstream timing or pixel-processing circuitry. The differential receiver architecture is valuable around motors, switching supplies, and long internal cables where common-mode noise could affect a single-ended interface. Engineers should preserve controlled-impedance routing, terminate each LVDS pair as specified, and verify the transmitter's lane mapping against the DS90CF364A pin table.

🖥️

Monitor Electronics

The DS90CF364AMTDX is suitable for monitor electronics requiring a dedicated receiver for an 18-bit LVDS display link at 65 MHz. The receiver can connect a video timing controller to downstream display-processing logic while operating from 3.3 V. Its 48-pin TSSOP package supports dense board layouts, but routing quality remains critical because uneven differential impedance, excessive trace length, or improper termination can reduce timing margin. Layout should use uninterrupted ground planes, closely coupled LVDS pairs, short return paths, and the decoupling arrangement specified by the manufacturer datasheet.

🎥

Video Timing Interface

The DS90CF364AMTDX can terminate the receiver side of a video timing link when the system uses an 18-bit differential data bus at up to 65 MHz. This makes it appropriate for timing-controller and display-interface assemblies that require a fixed 3.3 V supply and a 48-pin TSSOP footprint. The design benefit is the combination of an 18-bit parallel data interface and LVDS transport in one receiver IC. Timing closure must be based on the manufacturer's propagation-delay and setup/hold information rather than clock frequency alone, particularly when the cable and connector add propagation delay.

🏭

Human-Machine Interface Display

The DS90CF364AMTDX is a practical receiver for human-machine-interface panels using an 18-bit LVDS FPD link at 65 MHz. It allows a graphics or timing source to communicate with a panel assembly over differential conductors, which can improve robustness in industrial cabinets containing variable-speed motors and switching power conversion. The -10 °C to 70 °C operating range suits many indoor industrial environments, but enclosure temperature and display timing must be checked at worst case. PCB routing should retain the differential geometry specified for the 48-pin TSSOP implementation.

🧩

Embedded Display Controller

The DS90CF364AMTDX can serve as the panel-side receiver in an embedded display controller architecture where the graphics engine outputs an 18-bit LVDS stream. Its 65 MHz maximum signaling frequency supports the stated FPD-link class, while the 3.3 V supply allows integration with digital display-processing logic operating on the same rail. Designers must confirm that the controller's output lane count, data polarity, clock phase, and connector wiring match the receiver's documented terminal functions. Keep the LVDS section physically separated from high-current switching paths where practical.

📱

Digital Signage Interface

The DS90CF364AMTDX is appropriate for digital-signage electronics that distribute an 18-bit display signal through an LVDS FPD link at up to 65 MHz. The receiver provides a defined integration point between a controller board and a display assembly while operating from 3.3 V. Since long cable connections and nearby power converters can introduce noise and impedance discontinuities, the implementation should use controlled-impedance board routing, appropriate connector transitions, and the receiver termination recommended by the manufacturer. Validate the complete channel across temperature because both the transmitter and display timing budget contribute to margin.

סיכום מוצרים מומלצים

DS90CF364AMTDX Texas Instruments בשימוש ב-: Industrial Flat-Panel Display Receiver, Monitor Electronics, Video Timing Interface, Human-Machine Interface Display, Embedded Display Controller, Digital Signage Interface DS90CF364MTDX/NOPB Documented 48-pin TSSOP replacement בשימוש ב-: Industrial Flat-Panel Display Receiver, Video Timing Interface, Embedded Display Controller DS90CF364AMTDX/NOPB Orderable lead-free configuration בשימוש ב-: Monitor Electronics, Human-Machine Interface Display, Digital Signage Interface
What is the DS90CF364AMTDX?
The DS90CF364AMTDX is a Texas Instruments 3.3 V LVDS receiver for an 18-bit Flat Panel Display link operating up to 65 MHz. According to the Texas Instruments product page, it is packaged in a 48-pin TSSOP with an operating-temperature range of -10 °C to 70 °C. The device is intended for receiving differential display data and converting it into a parallel digital interface for the connected display system.
What are the key specifications of DS90CF364AMTDX?
The DS90CF364AMTDX combines a 3.3 V supply, an 18-bit FPD interface, and a maximum signaling frequency of 65 MHz in a 48-pin TSSOP package. Texas Instruments identifies the operating-temperature range as -10 °C to 70 °C. These specifications define the device's principal use in noise-sensitive display links, while the manufacturer datasheet remains the controlling reference for electrical limits, timing, and pin functions.
Where can I download the DS90CF364AMTDX datasheet PDF?
The DS90CF364AMTDX datasheet and product information are available through the Texas Instruments DS90CF364A product page at https://www.ti.com/product/DS90CF364A. The ordering-information link for the exact device is https://www.ti.com/product/DS90CF364A/part-details/DS90CF364AMTDX/NOPB. Use the manufacturer document for pin descriptions, recommended application circuitry, timing limits, and electrical characteristics.
Where can I find the DS90CF364AMTDX pinout?
The DS90CF364AMTDX pinout is documented in the Texas Instruments DS90CF364A datasheet, with the package shown as 48-pin TSSOP code DGG. Assign individual PCB nets using the pin-description table and package drawing in that document. The web product summary confirms the 48-pin package, but it does not reproduce the complete terminal list, so the manufacturer pin table should govern layout and schematic review.
Is DS90CF364AMTDX suitable for flat-panel display systems?
The DS90CF364AMTDX is specifically intended for 18-bit Flat Panel Display links operating at up to 65 MHz. Its 3.3 V supply and LVDS receiver function suit display timing and data paths where differential signaling improves noise immunity. It is a strong fit when the transmitter interface, parallel data width, clocking, voltage levels, and 48-pin TSSOP layout match the receiver requirements.
Can DS90CF364AMTDX replace DS90CF364MTDX/NOPB?
DS90CF364MTDX/NOPB is identified as a complete replacement for DS90CF364AMTDX because the performance characteristics, terminals, and 48-pin TSSOP package are consistent. The comparison indicates that replacement does not require PCB modification. Final substitution approval should still confirm device revision, marking, supply voltage, and acquisition traceability against the manufacturer ordering information.
What can replace DS90CF364AMTDX?
The best directly documented replacement is DS90CF364MTDX/NOPB, which is described as a complete replacement with consistent terminals and package in a 48-pin TSSOP footprint. It requires no existing-circuit modification according to the published comparison. Other DS90CF-family devices should not be treated as drop-in substitutes unless their lane functions, pinout, supply requirements, and interface width are separately verified.
Is DS90CF364AMTDX the same as DS90CF364AMTD?
DS90CF364AMTDX and DS90CF364AMTD identify ordering forms associated with the same DS90CF364A receiver family and the same 48-pin TSSOP device, but the exact orderable part number must be used when checking package, tape-and-reel orientation, and marking. Purchasing by the shortened family name can create ambiguity. Compare the complete orderable code, including any lead-free or tape-and-reel suffix, before releasing components for assembly.
What is the best cross-brand equivalent for DS90CF364AMTDX?
No cross-brand drop-in equivalent is established for the DS90CF364AMTDX by the available manufacturer and cross-reference records. An equivalent must preserve the 48-pin TSSOP land pattern, 3.3 V operation, 18-bit interface function, 65 MHz clocking capability, and matching LVDS pin functions. Use the Texas Instruments cross-reference search for current manufacturer options, and require complete pinout and timing comparison before approving another brand.
DS90CF364AMTDX vs DS90CF562MTD - which is better for an 18-bit display link?
DS90CF364AMTDX is the more direct choice for an 18-bit, 65 MHz Flat Panel Display link because Texas Instruments identifies it explicitly as an 18-bit FPD receiver. DS90CF562MTD belongs to a different receiver series, so package similarity alone does not establish compatibility. Select DS90CF364AMTDX unless the replacement also has identical 48-pin assignments, supply requirements, interface width, clocking, and electrical timing.
When should I choose DS90CF364AMTDX over DS90CF562MTD?
Choose DS90CF364AMTDX when the existing display architecture specifically requires an 18-bit FPD receiver operating at up to 65 MHz in a 48-pin TSSOP package. DS90CF562MTD may belong to a different lane width and protocol family, so it should be selected only after its pinout and timing have been proven equivalent. The defining selection criterion is functional pin compatibility, not merely a shared package.
Is DS90CF364AMTDX in stock?
Current inventory should be confirmed through the Request a Quote form on this page because stock levels can change quickly and vary by order quantity. The manufacturer product-details listing includes DS90CF364AMTDX/NOPB ordering information, but availability is transaction-specific. Submit the required quantity, target date, and packaging preference with the quote request to obtain current availability and lead-time confirmation.
What is the price of DS90CF364AMTDX?
The current unit price for DS90CF364AMTDX should be requested through the Request a Quote form on this page. The structured listing records the latest reference price separately from live transactional pricing, and that reference is not a guaranteed quote. For design budgeting, include quantity, delivery location, required package form, and target date in the request so the commercial response reflects the actual order configuration.
What is the lead time for DS90CF364AMTDX?
The current lead time for DS90CF364AMTDX is confirmed through the Request a Quote form on this page. Lead time depends on quantity, device marking, packaging, and the requested delivery schedule. Provide those details with the request rather than relying on a generic catalog lead time. For production planning, also request confirmation that the quoted orderable code matches the required 48-pin TSSOP configuration.
Where can I buy DS90CF364AMTDX online?
Use the Request a Quote form on this page to request DS90CF364AMTDX with the required quantity, package, and delivery information. The form connects the request to the available component channel without embedding a static price that may become stale. Confirm the complete orderable MPN, lead time, and traceability requirements in the response before placing a production order.

נתוני עזר הנדסיים עבור DS90CF364AMTDX — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose DS90CF364AMTDX when the display system requires a 3.3 V, 18-bit LVDS FPD receiver operating at up to 65 MHz and using a 48-pin TSSOP footprint. Choose DS90CF364MTDX/NOPB when the manufacturer ordering information identifies that ordering form as the preferred directly replaceable option; the published comparison states that its terminals and package are consistent and that PCB changes are unnecessary. Choose DS90CF364AMTDX/NOPB when the specified /NOPB orderable configuration is required for procurement or assembly documentation. Do not choose DS90CF562MTD, DS90CF564MTD/NOPB, or another DS90CF-series receiver solely because its package appears similar. Those devices must pass a complete comparison of interface width, clock capability, lane assignments, electrical levels, timing, enable behavior, and power sequencing. For any second-source proposal, require manufacturer cross-reference confirmation and a board-level review rather than relying on package equivalence alone.

השוואה עם חלופות

פרמטר מוצר זה DS90CF364MTDX/NOPB DS90CF364AMTDX/NOPB
Package 48-TSSOP (DGG) 48-TSSOP 48-TSSOP (DGG)
Brand Texas Instruments Texas Instruments Texas Instruments
Product Function 3.3 V LVDS FPD Receiver LVDS FPD Receiver 3.3 V LVDS FPD Receiver
Interface Width 18 bits 18 bits 18 bits
Maximum Signaling Frequency 65 MHz 65 MHz 65 MHz
Supply Voltage 3.3 V 3.3 V 3.3 V
Pin Count 48 pins 48 pins 48 pins
Mounting Type Surface Mount Surface Mount Surface Mount

מבדילים עיקריים

  • Purpose-built 18-bit FPD receiver (לעומתDS90CF562MTD)
  • Direct documented replacement path (לעומתDS90CF364MTDX/NOPB)
  • Orderable 48-pin TSSOP configuration (לעומתDS90CF364AMTDX/NOPB)

הערות תכנון

Route each LVDS differential pair on a continuous reference plane with tightly coupled spacing, matched intra-pair geometry, and minimal vias. Avoid routing the display link beneath switching-power nodes or parallel to high-current conductors. The 48-pin TSSOP receiver requires the manufacturer pin assignments to be copied exactly into the schematic and PCB footprint before fabrication.

Apply the input termination and decoupling arrangement specified by the Texas Instruments datasheet rather than copying a generic LVDS receiver layout. Check the complete channel for differential impedance, connector transitions, pair-length balance, and clock/data timing at the 65 MHz operating limit. These checks matter because the receiver can be electrically correct while the assembled channel still consumes the available timing margin.

Do not substitute a receiver solely because it uses a 48-pin TSSOP package or belongs to the DS90CF family. Confirm that every terminal has the same function, that the interface width and clock rate are acceptable, and that supply and I/O levels match. A complete replacement must also preserve the footprint, board keepouts, thermal layout, and trace topology.

Place the receiver's supply bypass capacitors close to the appropriate power terminals and connect them to a low-impedance ground plane. Keep the LVDS return path continuous through every plane transition. Confirm the 3.3 V rail remains within the device limits at the receiver, particularly near a display timing controller or switching regulator operating under transient load.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product and ordering information identifies the device and package, but the available records do not explicitly state the requested compliance classifications. No compliance status has been inferred.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

DS90CF364AMTDX datasheet DS90CF364AMTDX pinout DS90CF364AMTDX datasheet pdf DS90CF364AMTDX replacement DS90CF364AMTDX equivalent DS90CF364AMTDX 48-TSSOP DS90CF364AMTDX LVDS receiver DS90CF364AMTDX 18-bit 65MHz DS90CF364AMTDX price DS90CF364AMTDX stock Texas Instruments DS90CF364AMTDX DS90CF364AMTDX vs DS90CF364MTDX/NOPB

רכיבים ומונחים קשורים

Texas Instruments DS90CF364AMTDX DS90CF364AMTDX/NOPB DS90CF364MTDX/NOPB DS90CF364A LVDS receiver interface IC Flat Panel Display Link FPD link low-voltage differential signaling parallel digital interface 3.3 V power supply 65 MHz signaling 18-bit data interface 48-pin TSSOP DGG package surface-mount package differential pair routing controlled impedance input termination industrial display monitor electronics video timing interface digital signage human-machine interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר