DS90LV001TLD-NS - 800 Mbps LVDS Buffer | Texas Instruments
MPN: DS90LV001TLD-NS ✗ סוף ייצורDS90LV001TLD-NS סקירה
An LVDS buffer is a high-speed interface IC that regenerates a low-voltage differential signaling signal while preserving the logic state and differential signaling characteristics required by the receiver. In the electronics hierarchy, the DS90LV001 belongs to the LVDS interface-buffer class, interface IC category, and broader signal-integrity and data-communication semiconductor family. Its primary role is to isolate and restore signals traveling through controlled-impedance board traces, especially when long traces, connectors, or backplane stubs create loading and reflections.
The device provides an 800 Mbps data rate, 1.4 ns typical propagation delay, and 100 ps typical peak-to-peak jitter when tested with a 2^23 - 1 pseudo-random binary sequence. It is compatible with the ANSI/TIA/EIA-644-A LVDS standard. The manufacturer also specifies an industrial temperature range of -40 °C to +85 °C and offers both 8-pin SOIC and space-saving 8-WSON options, with the WSON body saving approximately 70% of board area relative to the SOIC option.
The fully differential input-to-output architecture helps maintain common-mode control and rejects noise that is common to both conductors. Because the DS90LV001 is designed for 800 Mbps operation, PCB layout remains a critical part of the design. Differential impedance, component placement, return paths, connector geometry, and transmission-line termination must be evaluated together to preserve signal integrity at the intended data rate.
Typical applications include LVDS clock distribution, backplane signal conditioning, point-to-point links between industrial controllers, high-speed instrumentation, test and measurement equipment, and communication systems that distribute differential signals over controlled-impedance interconnect. The buffer is particularly useful when the source and destination are not close enough for a clean direct connection or when a transmission-line segment needs regeneration before another receiver stage.
Use the manufacturer's pin-description table and recommended-layout guidance when assigning PCB tracks. Keep the differential pair continuous with matched geometry, place termination components close to the receiving device, and route over a continuous reference plane. Avoid adding unterminated stubs because they can create reflections that degrade the 800 Mbps edge rate.
This page combines the manufacturer specifications, replacement information, package details, and application-oriented design guidance in one engineering reference. It also distinguishes the exact orderable MPN from other DS90LV001 ordering codes so procurement, footprint review, and signal-integrity validation can be completed against the correct device.
חלופות תחליף ישיר עבור DS90LV001TLD-NS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
DS90LV001TLD/NOPB
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
DS90LV001TLD-NS מפרטים
| פונקציה | Single-channel LVDS-to-LVDS buffer |
| Maximum Data Rate | 800 Mbps |
| Propagation Delay | 1.4 ns typical |
| Peak-to-Peak Jitter | 100 ps typical with PRBS = 2^23 - 1 at 800 Mbps |
| מתח אספקה | 3.3 V single supply |
| Signal Path | Fully differential |
| LVDS Standard | ANSI/TIA/EIA-644-A |
| Channel Count | 1 channel |
| טווח טמפרטורת פעולה | -40 °C to +85 °C |
| מארז | 8-WSON, 3 x 3 mm |
| סוג הרכבה | Surface mount |
| Space Saving Versus SOIC | Approximately 70% smaller |
| Alternative Package | 8-pin SOIC |
מדריך תצורת פינים של DS90LV001TLD-NS 8-pin soic
תצורת פינים עבור DS90LV001TLD-NS (מארזת 8-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור DS90LV001TLD-NS.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
DS90LV001TLD-NS מתאים עבור 6 יישוםs: LVDS Backplane Signal Conditioning, High-Speed LVDS Clock Distribution, Industrial Controller Point-to-Point Links, Test and Measurement Equipment, High-Speed Instrumentation Interconnect, Communication Equipment Signal Distribution.
LVDS Backplane Signal Conditioning
The DS90LV001TLD-NS is suitable for regenerating an 800 Mbps LVDS signal across a backplane segment where trace loading, connector transitions, or receiver stubs could otherwise degrade edge quality. Its fully differential path preserves the encoded logic state while presenting a new LVDS output to the next controlled-impedance segment. The 1.4 ns typical propagation delay and 100 ps typical peak-to-peak jitter provide useful timing margins for properly terminated links. Place the buffer close to the source or split point, maintain continuous differential geometry over a reference plane, and avoid unterminated branches because those discontinuities create reflections that can become significant at an 800 Mbps edge rate.
מומלץ
High-Speed LVDS Clock Distribution
The DS90LV001TLD-NS can distribute a differential clock at rates up to 800 Mbps when the source must drive a remote receiver through a board or cable transition. Regenerating the clock provides a cleaner output than relying on the original source across a long or loaded trace. Its typical 1.4 ns propagation delay must be included in clock-budget analysis, while the 100 ps typical peak-to-peak jitter helps characterize timing margin. Keep the clock pair closely coupled, provide the required LVDS termination at the receiver, and use matched connectors and reference planes so the clock sees a controlled-impedance path.
מומלץ
Industrial Controller Point-to-Point Links
The DS90LV001TLD-NS supports industrial point-to-point communication where a controller and peripheral must exchange an 800 Mbps LVDS signal across a routed board region. Its -40 °C to +85 °C industrial temperature range covers factory equipment, instrumentation, and industrial automation environments. The buffer isolates the transmitting stage from downstream loading and produces a restored differential output for the receiving device. Use it only when the connected devices implement compatible LVDS electrical signaling, and observe the manufacturer's recommended termination arrangement at both ends of the transmission line.
מומלץ
Test and Measurement Equipment
The DS90LV001TLD-NS fits high-speed test and measurement systems that distribute differential stimulus, trigger, or measurement-clock signals. At 800 Mbps, the buffer can regenerate a signal before it enters a longer instrument interconnect, reducing sensitivity to source loading. The 1.4 ns typical propagation delay should be calibrated out of time-domain measurements, and the 100 ps typical jitter figure provides a reference for edge-quality assessment. Controlled-impedance routing, nearby termination, and careful grounding are essential because laboratory cables and connectors can introduce additional reflections not represented by the IC specifications.
מומלץ
High-Speed Instrumentation Interconnect
The DS90LV001TLD-NS can isolate an instrumentation signal path when a front-end ASIC, converter, or data-capture device drives a remote circuit through a long board trace. The 800 Mbps operation preserves high data-rate capability, while the fully differential topology helps reject common-mode noise and maintain a defined differential output. Use it as a regeneration point rather than as a protocol translator: input encoding, output encoding, clocking, and termination must remain compatible with the rest of the link. Decoupling and return-path continuity should follow the manufacturer layout guidance to prevent supply or reference-plane discontinuities from appearing on the data path.
מומלץ
Communication Equipment Signal Distribution
The DS90LV001TLD-NS is applicable in communication equipment that sends one LVDS signal between subsystems separated by a connector or extended controlled-impedance trace. Its 800 Mbps data-rate capability and typical 1.4 ns delay suit many internal serial links, and its surface-mount 8-WSON 3 x 3 mm package supports compact boards. The package saves approximately 70% of the area associated with the 8-pin SOIC option according to the manufacturer. The trade-off is tighter layout sensitivity: the compact body requires short capacitor connections, uninterrupted ground reference, and differential routing that maintains consistent spacing throughout the escape and routing regions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור DS90LV001TLD-NS — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | DS90LV001TLD/NOPB |
|---|---|---|
| Package | 8-WSON (3 x 3 mm) | 8-WSON (3 x 3 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Function | Single-channel LVDS-to-LVDS buffer | Single-channel LVDS-to-LVDS buffer |
| Maximum Data Rate | 800 Mbps | 800 Mbps |
| Propagation Delay | 1.4 ns typical | 1.4 ns typical |
| Peak-to-Peak Jitter | 100 ps typical with PRBS = 2^23 - 1 at 800 Mbps | 100 ps typical with PRBS = 2^23 - 1 at 800 Mbps |
| Supply Voltage | 3.3 V single supply | 3.3 V single supply |
| Signal Path | Fully differential | Fully differential |
| LVDS Standard | ANSI/TIA/EIA-644-A compatible | ANSI/TIA/EIA-644-A compatible |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C |
מבדילים עיקריים
- Exact same-family sourcing path for an obsolete-ordering-code transition (לעומתDS90LV001TLD/NOPB)
- High-speed timing with a compact footprint (לעומתDS90LV001TLD/NOPB)
- Direct compatibility with standard LVDS interconnects (לעומתDS90LV001TLD/NOPB)
הערות תכנון
Route the LVDS input and output as a tightly coupled differential pair over a continuous reference plane. Maintain uniform spacing and avoid plane changes, vias, and split-plane transitions wherever possible. Because the device supports 800 Mbps, even a small impedance discontinuity can create a reflected edge. Keep the pair away from noisy switching paths and preserve a continuous return-current path beneath both conductors.
Do not add unterminated stubs to an LVDS trace. The DS90LV001 is intended to regenerate signals for controlled-impedance transmission lines, not to compensate for arbitrary branch geometry. Follow the manufacturer termination recommendations at the receiver and ensure that connector or test-point branches are properly terminated. Otherwise, reflected signals can overlap the next bit and degrade jitter or produce data errors.
Use the manufacturer’s recommended decoupling arrangement and place the input, output, and supply connections as short as practical. The compact 8-WSON body saves approximately 70% of the board area of the SOIC option, but that same compactness requires disciplined escape routing. Check the package drawing for the exposed-pad connection and ensure its thermal and electrical treatment matches the official land pattern.
Budget the 1.4 ns typical propagation delay when assessing source-to-destination timing, especially in clocked or round-trip systems. The 100 ps typical peak-to-peak jitter specification was measured with a 2^23 - 1 PRBS pattern at 800 Mbps; actual board jitter can be higher because of reflections, loss, connector transitions, and power-supply noise. Validate the complete channel with representative termination and enclosure conditions.
מידע על תאימות
The manufacturer material explicitly identifies ANSI/TIA/EIA-644-A LVDS compatibility and an industrial temperature range. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for the exact -NS orderable MPN.