EFM32WG232F64-B-QFP64 - 48MHz 64KB Cortex-M4F MCU | Silicon Labs
MPN: EFM32WG232F64-B-QFP64 ✓ פעילEFM32WG232F64-B-QFP64 סקירה
A microcontroller is the central programmable controller in an embedded system. It executes application firmware, reads sensors, controls actuators, manages communications, and coordinates timing among peripherals. In the product hierarchy, this device is a 32-bit microcontroller based on an ARM Cortex-M4F core, with DSP and floating-point instruction support. The Cortex-M4F architecture sits between simpler Cortex-M3 controllers and higher-end application processors, making it suitable for connected products that require real-time control and efficient computation without an external microprocessor.
Key features include a 48 MHz Cortex-M4F core, 64 KB flash for firmware, 32 KB SRAM for working memory, and a 64-pin TQFP package. The microcontroller supports 1.98 V to 3.8 V operation according to the published product listing. Its digital peripherals can be assigned to configurable I/O locations, helping designers direct communications, timers, and general-purpose inputs and outputs to appropriate pins. The family also emphasizes fast wake-up behavior and low-power modes for systems that spend substantial time between user interactions or sensor readings.
The integrated radio makes the EFM32WG232F64-B-QFP64 especially useful for wireless sensor nodes, connected industrial instruments, and compact control products. Its 48 MHz core can handle protocol processing and real-time control while the wireless subsystem handles packet transmission. The Cortex-M4F floating-point and DSP capabilities also support signal conditioning and control loops that require more arithmetic performance than a basic Cortex-M3 device.
Typical applications include Zigbee and wireless sensor networks, industrial monitoring equipment, building automation, consumer accessories, and portable sensing products. Designers can use the microcontroller as the central system controller rather than combining a discrete MCU and radio. When planning the PCB, preserve the exposed programming and debug interface, route the RF section according to the reference layout, and place decoupling and RF-support components close to their associated pins.
This page combines the manufacturer data-sheet identity, verified distributor specifications, engineering application guidance, and a conservative drop-in assessment. It distinguishes an electrically and pin-compatible orderable alternative from merely similar wireless microcontrollers, helping purchasing and hardware teams compare options without overlooking firmware, package, or RF-layout constraints.
חלופות תחליף ישיר עבור EFM32WG232F64-B-QFP64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EFM32WG232F64-B-QFP64 (אותו גורם צורה וטביעת רגל) — שונים ב Maximum CPU Frequency, Architecture, DSP Support, Flash Memory, Floating-Point Unit.
EFM32WG232F64-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32G232F64-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32WG232F64-B-QFP64 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit wireless microcontroller |
| Processor Core | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| RAM Memory | 32 KB |
| Architecture | 32-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Core Count | 1 core |
| מארז | 64-TQFP (10 mm x 10 mm) |
| סוג הרכבה | Surface mount |
| Product Family | EFM32 Wonder Gecko |
| Program Memory Type | Flash |
| DSP Support | Yes |
| Floating-Point Unit | Yes |
| I/O Configuration | Configurable peripheral I/O locations |
| Low-Power Modes | Supported |
| Fast Wake-Up | Supported |
מדריך תצורת פינים של EFM32WG232F64-B-QFP64 64-tqfp (10 mm x 10 mm)
תצורת פינים עבור EFM32WG232F64-B-QFP64 (מארזת 64-tqfp (10 mm x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EFM32WG232F64-B-QFP64.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EFM32WG232F64-B-QFP64 מתאים עבור 6 יישוםs: Wireless Sensor Nodes, Industrial Monitoring Equipment, Building Automation, Portable Medical Accessories, Smart Home Control Modules, Connected Consumer Accessories.
Wireless Sensor Nodes
The EFM32WG232F64-B-QFP64 fits wireless sensor nodes that must gather local measurements, filter data, and transmit it over a Wonder Gecko radio link. Its 48 MHz Cortex-M4F core provides more arithmetic capability than a basic Cortex-M3 controller, while 64 KB of flash holds application firmware and 32 KB of SRAM supports working state and protocol buffers. Fast wake-up and low-power operation are particularly useful in devices that sleep between measurement cycles. Place the radio-support network and decoupling components according to the manufacturer reference layout, and validate wake-state current against the required battery life.
מומלץ
Industrial Monitoring Equipment
For industrial monitoring equipment, the EFM32WG232F64-B-QFP64 can supervise sensors and forward measurements without a separate communications processor. The 48 MHz Cortex-M4F core is suitable for control loops, scaling calculations, and filtering, and its configurable peripheral I/O allows communication, timer, and general-purpose signals to be assigned to suitable pins. Wireless connectivity also reduces cabling in distributed installations. Confirm the device's temperature grade, isolation needs, antenna design, and applicable industrial requirements before deployment, while using the family reference circuit and PCB layout as the starting point for EMC performance.
מומלץ
Building Automation
The EFM32WG232F64-B-QFP64 is appropriate for wireless building-automation endpoints that monitor occupancy, temperature, or equipment state and report over a low-power network. Its Cortex-M4F processor can execute local control and debounce logic while its low-power modes limit energy use between network events. Thirty-two kilobytes of SRAM is useful for protocol state and short message buffers, and 64 KB of flash accommodates a compact application. Deployment planning should account for radio coexistence, antenna placement inside the enclosure, and firmware updates, all of which can affect both field performance and maintenance requirements.
מומלץ
Portable Medical Accessories
The EFM32WG232F64-B-QFP64 can serve as the control and communications platform in compact medical accessories when the system requires local signal processing and wireless connectivity. The Cortex-M4F core supports DSP and floating-point operations, making it more capable than a Cortex-M3 for filtering, scaling, and control tasks. Its low-power behavior can benefit battery-powered operation, although medical-system suitability depends on the complete accessory design, not the MCU alone. Validate electrical safety, regulatory requirements, radio coexistence, and the manufacturer's specified operating limits before clinical use.
מומלץ
Smart Home Control Modules
For smart-home control modules, the EFM32WG232F64-B-QFP64 combines application control, low-power operation, and wireless communication in a single 64-pin device. A 48 MHz core can coordinate inputs, actuator commands, indicator updates, and network messaging, while the 32 KB RAM avoids requiring a separate communications processor for compact designs. The 64 KB flash supports a focused control application. Because the QFP package exposes many signals, pay close attention to the exposed pad and pin-assignment table, and follow the manufacturer layout for the radio section to minimize RF coupling and antenna detuning.
מומלץ
Connected Consumer Accessories
The EFM32WG232F64-B-QFP64 fits connected consumer accessories that combine local control with wireless communication and need a compact embedded footprint. Its Cortex-M4F core supports responsive user-interface logic and DSP-assisted signal processing, while the Wonder Gecko platform provides a direct path to wireless networking. The 64 KB flash and 32 KB SRAM are appropriate for focused firmware rather than heavy graphical workloads. Product designers should evaluate boot behavior, firmware update strategy, radio certification, and antenna placement, particularly when the device is expected to operate for long periods between user interactions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EFM32WG232F64-B-QFP64 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EFM32WG232F64-QFP64 | EFM32G232F64-QFP64 |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP | 64-QFP |
| Product Family | EFM32 Wonder Gecko | EFM32 Wonder Gecko | EFM32 Gecko |
מבדילים עיקריים
- Higher Cortex processing performance (לעומתEFM32G232F64-QFP64)
- More SRAM for connected firmware (לעומתEFM32G232F64-QFP64)
- Closest ordering configuration (לעומתEFM32WG232F64-QFP64)
הערות תכנון
Follow the Silicon Labs EFM32WG reference layout for the radio-support network, antenna connection, crystal circuitry, and decoupling. Preserve the exposed-pad thermal and electrical connection exactly as specified in the package drawing. Place input and bulk-decoupling capacitors adjacent to their associated supply pins and route critical traces away from the antenna feed to reduce RF coupling, supply noise, and unintended startup or reset behavior.
Budget the power rail for the actual processor and radio activity instead of using a single nominal current value. The device operates from 1.98 V to 3.8 V, and battery life depends on sleep current, wake frequency, transmit power, and supply efficiency. Estimated: if the average current is divided by the rail efficiency, required source capacity equals average input current divided by efficiency; add design margin for RF peak load and transient response.
Do not treat a matching package and flash size as sufficient proof of a drop-in substitution. Verify every power, ground, reset, programming, antenna, and peripheral connection in the manufacturer's pin table, then review startup and radio initialization in firmware. This is particularly important for EFM32G232F64-QFP64 because its Cortex-M3 core and 32 MHz maximum frequency differ materially from the Cortex-M4F target.
Assign communication and timer signals with the configurable peripheral-I/O feature early in the PCB layout, then confirm that the selected alternate-function pins do not conflict with programming, debug, or RF functions. Maintain short return paths for sensitive signals and use solid grounding around the MCU. If an external antenna is used, reproduce the manufacturer-recommended matching and feed geometry before making enclosure-level RF tuning assumptions.
מידע על תאימות
The retrieved product and data-sheet listings do not explicitly state the requested compliance statuses, so each field remains unknown rather than assumed.