EP1C3T144I7N - Cyclone FPGA, 2910 LEs, 144-LQFP | Intel
MPN: EP1C3T144I7N ⚠ רכישה אחרונהEP1C3T144I7N סקירה
What is an FPGA? A Field Programmable Gate Array is a semiconductor device built from an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated I/O cells that allow hardware designers to implement custom digital logic after manufacturing. In the broader taxonomy, FPGAs sit between general-purpose CPUs and fixed-function ASICs: they offer ASIC-level parallelism and deterministic timing while preserving the flexibility of software-programmable logic. FPGAs belong to the programmable logic device (PLD) family, alongside CPLDs and older PAL/GAL devices.
Key differentiating specifications of the EP1C3T144I7N include 2,910 logic elements (LEs), 13 embedded M4K RAM blocks totaling 59,904 bits (13,824 bytes), 104 maximum user I/O pins, and a single enhanced PLL supporting clock multiplication, division, and phase shifting. The device also integrates embedded multipliers suited for basic DSP workloads. Compared with modern FPGAs it is small, but its low unit cost and 144-LQFP ease-of-assembly footprint make it attractive for legacy designs.
Architecturally, the EP1C3T144I7N uses an SRAM-based configuration cell, requiring an external configuration memory (typically a serial EPCS device) or JTAG programming on every power-up. The 144-LQFP package supports hand-soldering and standard SMT assembly without BGA rework, simplifying prototyping and repair. Quartus II software (legacy versions) is required for design entry, synthesis, place-and-route, and bitstream generation.
Typical applications include industrial motor control glue logic, legacy communication protocol bridges (UART, SPI, I2C, custom parallel buses), low-volume custom peripheral controllers, educational digital design platforms, and FPGA-based prototyping where a low pin-count and simple assembly process are priorities. The industrial temperature grade extends usability into factory automation and outdoor enclosures.
When designing with the EP1C3T144I7N, allocate sufficient decoupling capacitance near each VCCINT and VCCIO supply pin (typically 0.1 uF ceramic plus a bulk capacitor), and respect I/O bank voltage grouping since the device supports multiple I/O standards (LVTTL, LVCMOS, PCI, SSTL) only when VCCIO of each bank is set accordingly.
This page synthesizes distributor pricing from LCSC, DigiKey, and Octopart alongside same-brand and cross-brand drop-in Cyclone alternatives, practical Quartus II design notes, and a parametric comparison not found on any single manufacturer page.
חלופות תחליף ישיר עבור EP1C3T144I7N — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EP1C3T144I7N (אותו גורם צורה וטביעת רגל) — שונים ב Speed Grade, Process Technology, Package, Operating Temperature, RoHS Status.
EP1C3T144C7N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP1C3T144I7
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP1C4T144I7N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EP1C6T144I7N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP1C3T144I7N דירוגים מרביים ומאפיינים חשמליים
| Family | Cyclone |
| Logic Elements | 2910 |
| Total RAM Bits | 59904 |
| Number of LABs | 291 |
| Number of I/Os | 104 |
| Number of M4K RAM Blocks | 13 |
| Number of PLLs | 1 |
| Core Voltage | 1.5 V |
| טמפרטורת פעולה | -40C to +100C (Industrial) |
| מארז | 144-LQFP (TQFP-144) |
| סוג הרכבה | Surface Mount |
| Process Technology | 0.13 um SRAM |
| Configuration Mode | AS / PS / JTAG |
| Speed Grade | 7 |
| Temperature Grade | Industrial (I) |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של EP1C3T144I7N 144-lqfp (tqfp-144)
תצורת פינים עבור EP1C3T144I7N (מארזת 144-lqfp (tqfp-144)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EP1C3T144I7N.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EP1C3T144I7N מתאים עבור 6 יישוםs: Industrial Motor Control, Legacy Communication Protocol Bridge, Educational Digital Design Platform, FPGA-Based Prototyping, Custom Peripheral Controller, Glue Logic Replacement.
Industrial Motor Control
The EP1C3T144I7N's 2910 logic elements and 104 user I/Os provide sufficient capacity for BLDC and servo motor control glue logic including PWM generation, quadrature encoder interfacing, and Hall sensor decoding. Its industrial -40C to +100C temperature grade allows deployment in factory automation cabinets and outdoor motor housings. According to the manufacturer datasheet, the single PLL generates the precise switching frequencies required for field-oriented control loops, while the 13 M4K RAM blocks buffer position lookup tables.
מומלץ
Legacy Communication Protocol Bridge
The EP1C3T144I7N fits legacy UART-to-SPI, I2C-to-parallel, or custom industrial bus bridges where protocol translation between heterogeneous microcontrollers is required. Its 59,904 RAM bits accommodate FIFOs for baud-rate mismatches, while the 144-LQFP package allows straightforward 4-layer PCB routing for high-speed signals. According to typical Cyclone reference designs, the embedded multiplier supports Manchester or 8b/10b encoding without external logic.
מומלץ
Educational Digital Design Platform
The EP1C3T144I7N is widely used in university FPGA labs because its 144-LQFP package supports hand-soldering and standard breakout PCBs, eliminating BGA rework challenges for student projects. The 2910 LEs are large enough for a RISC-V soft core, custom state machines, and DSP exercises. According to Intel/Altera university program materials, Quartus II Web Edition is free for academic use, making the total platform cost accessible.
מומלץ
FPGA-Based Prototyping
The EP1C3T144I7N is used as a prototype target for ASIC and custom silicon validation, providing a low-cost, accessible platform with sufficient logic capacity for medium-complexity designs. The 13 M4K RAM blocks emulate SRAM interfaces while the single PLL synthesizes test clocks. According to industry prototyping guides, the 104 I/Os support LVCMOS 3.3V, LVTTL, and PCI signaling for broad peripheral compatibility during validation campaigns.
מומלץ
Custom Peripheral Controller
Low-volume custom peripheral controllers benefit from the EP1C3T144I7N's combination of low unit cost, 104 user I/Os, and SRAM-based reconfigurability that allows field firmware updates without hardware changes. The device can implement custom register maps, interrupt controllers, and DMA engines that would be impractical in discrete logic. According to the manufacturer datasheet, configuration via JTAG enables rapid in-system programming during production testing.
מומלץ
Glue Logic Replacement
The EP1C3T144I7N consolidates dozens of legacy 74-series TTL glue logic chips into a single reconfigurable device, reducing PCB area and BOM cost for legacy system revivals. Its 144-LQFP package is footprint-compatible with older through-hole designs when adapter boards are used. According to industry migration guides, integrating address decoding, chip-select generation, and timing adjustment in one device simplifies obsolete-component management.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EP1C3T144I7N — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EP1C3T144C7N | EP1C3T144I7 | EP1C4T144I7N | EP1C6T144I7N | EP1C3T100C7N |
|---|---|---|---|---|---|---|
| Package | 144-LQFP | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 2910 | 2910 | 2910 | 4000 | 5980 | 2910 |
| RAM Bits | 59904 | 59904 | 59904 | 78336 | 92160 | 59904 |
| User I/Os | 104 | 104 | 104 | 104 | 104 | 65 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +70C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +70C) |
| Number of PLLs | 1 | 1 | 1 | 2 | 2 | 1 |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
מבדילים עיקריים
- Industrial temperature grade with 144-LQFP ease-of-assembly (לעומתEP1C3T144C7N)
- Upward capacity headroom with same footprint (לעומתEP1C4T144I7N)
- Lead-free (Pb-free) lead finish with N suffix (לעומתEP1C3T144I7 (without N))
הערות תכנון
Estimated: the EP1C3T144I7N core draws approximately 50 mA quiescent at 1.5V (75 mW). Decouple each VCCINT pin with a 0.1 uF ceramic capacitor plus a 10 uF bulk capacitor placed within 5 mm of the package. Each VCCIO bank should have its own 0.1 uF + bulk capacitor pair. According to the manufacturer datasheet, separate analog and digital ground planes are not required but star-grounding at the FPGA improves PLL jitter.
Route all clock signals on the inner PCB layers with ground reference and keep clock trace lengths matched within 1 mm if used as differential pairs. The 144-LQFP package has 0.5 mm pitch - use 0.15 mm/0.15 mm trace/space rules and escape fanout on inner layers. According to the Cyclone Device Handbook pin information document, dedicate one PCB layer as a continuous ground plane directly beneath the FPGA to minimize return-current loop area.
Configuration mode selection via MSEL0/MSEL1 pins is critical - AS mode requires an EPCS configuration memory, PS mode requires an external master, and JTAG mode uses the 10-pin header. According to the manufacturer datasheet, leaving MSEL pins floating can result in configuration failures. Additionally, ensure nCONFIG is pulled high with a 10 kohm resistor and the JTAG chain is properly terminated with TCK pull-down and TMS pull-up resistors.
מידע על תאימות
N suffix indicates Pb-free lead finish per RoHS directive. Industrial temperature grade qualifies for factory automation but is NOT AEC-Q100 automotive-qualified. Halogen-free status not explicitly stated in the verified web data.