EP20K100EQI240-2X - APEX 20KE 100K Gates FPGA 240-PQFP | Intel
MPN: EP20K100EQI240-2X ✗ סוף ייצורEP20K100EQI240-2X סקירה
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that combines lookup-table (LUT) logic, product-term logic, and embedded memory blocks on a single die, enabling system-on-a-programmable-chip (SOPC) integration. APEX-20KE belongs to the broader PLD taxonomy: PLD -> FPGA -> SRAM-based FPGA -> APEX-20KE family. This hierarchical integration is critical for high-density, register-intensive designs such as custom datapaths, glue logic, and DSP pre/post-processing.
Key features include the MultiCore architecture combining embedded array blocks (EABs), logic array blocks (LABs), and FastTrack interconnect, LVDS I/O support for high-speed differential signaling, and built-in boundary-scan (JTAG/IEEE 1149.1) for board-level testability. The device is specified for industrial temperature range (–40 °C to +85 °C) and supports in-system programmability via the serial configuration scheme.
The APEX-20KE architecture integrates look-up table logic with product-term logic and dedicated embedded memory, providing a flexible platform for designs that mix glue logic with on-chip buffering. The 0.22 µm process combined with the FastTrack continuous routing fabric enables predictable timing closure at clock frequencies up to the datasheet-rated maximum.
Typical applications include telecommunications line cards, industrial motor control pre-processing, custom glue logic between microprocessors and peripherals, and bridge/controller interfaces. It is widely used in legacy systems that require LVDS signaling alongside a large general-purpose logic fabric.
When designing with this device, ensure the configuration scheme (typically serial or parallel) and clock-distribution strategy align with the Quartus II design flow. The I/O banks must be powered with voltages compatible with downstream devices, and JTAG pins should be reserved for in-system programming and board-test access.
חלופות תחליף ישיר עבור EP20K100EQI240-2X — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EP20K100EQI240-2X (אותו גורם צורה וטביעת רגל) — שונים ב Core Supply Voltage, Package, Process Technology, Device Type, Maximum Internal Frequency.
EP20K100EQC240-2X
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP20K100EQC240-3N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP20K100EQC240-1X
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EP20K100EQI240
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EP20K100EQC240-2N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
EP20K100EQI240-2X דירוגים מרביים ומאפיינים חשמליים
| Series | APEX-20KE |
| Family | APEX 20K |
| System Gates | 100,000 |
| Logic Elements / Cells | 4,160 |
| Total RAM Bits | 53,248 |
| Number of I/O | 183 |
| Core Supply Voltage | 1.8 V (1.71 V to 1.89 V) |
| Process Technology | 0.22 µm CMOS |
| Maximum Operating Frequency | 250 MHz |
| מארז | 240-BFQFP / 240-PQFP (32x32 mm) |
| סוג הרכבה | Surface Mount |
| טווח טמפרטורת פעולה | -40 °C to +85 °C (Industrial) |
| I/O Standards | LVTTL, LVCMOS, LVDS, PCI, GTL+ |
| Configuration Method | Serial / Passive Parallel |
מדריך תצורת פינים של EP20K100EQI240-2X 240-bfqfp / 240-pqfp (32x32 mm)
תצורת פינים עבור EP20K100EQI240-2X (מארזת 240-bfqfp / 240-pqfp (32x32 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EP20K100EQI240-2X.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EP20K100EQI240-2X מתאים עבור 6 יישוםs: Telecommunications Line Cards, Industrial Motor Control Pre-Processing, Glue Logic Between Microprocessor and Peripherals, Custom Bridge and Controller Interfaces, Legacy PCI Card Designs, Test and Measurement Instrumentation.
Telecommunications Line Cards
The EP20K100EQI240-2X suits telecom line cards thanks to its 100K system gates, 53,248 bits of embedded memory, and LVDS I/O support. Its 183 user I/O pins handle multiple backplane interfaces in parallel, while the FastTrack interconnect fabric ensures predictable timing for serializer/deserializer glue logic and framing controllers. Industrial temperature grade (-40 C to +85 C) makes it suitable for outdoor-mounted DSLAMs and central-office equipment.
מומלץ
Industrial Motor Control Pre-Processing
The EP20K100EQI240-2X is well-matched to industrial motor-control pre-processing boards where it generates PWM timing, decodes encoder feedback, and conditions Hall-effect sensor inputs before handing off to a DSP or microcontroller. Its 1.8 V core consumes modest power while the LVCMOS I/O banks drive 3.3 V gate drivers directly. Industrial temperature grade ensures reliable operation across factory-floor ambient conditions.
מומלץ
Glue Logic Between Microprocessor and Peripherals
The EP20K100EQI240-2X excels at custom glue-logic integration between a host microprocessor and mixed-voltage peripherals. With 183 I/O supporting LVTTL, LVCMOS, PCI, and GTL+ simultaneously, it can bridge a 3.3 V CPU bus to 5 V legacy peripherals without external level shifters. The 4,160 logic cells comfortably accommodate wide decode, handshake, and bus-arbitration functions on a single die.
מומלץ
Custom Bridge and Controller Interfaces
The EP20K100EQI240-2X is ideal for custom bridge and controller interface designs where protocol translation is required. Its MultiCore architecture combines lookup-table logic, product-term logic, and embedded memory blocks, allowing state-machine implementations, FIFO buffering, and protocol conversion to coexist on the same die. The 250 MHz internal clock supports high-speed serial bridge channels.
מומלץ
Legacy PCI Card Designs
The EP20K100EQI240-2X includes dedicated PCI-compatible I/O, making it an excellent choice for legacy PCI add-in card designs in industrial PCs, test instruments, and data-acquisition boards. Its 183 I/O comfortably handle a 32-bit/33 MHz PCI bus plus auxiliary peripheral interfaces, while the 53,248 bits of embedded memory provide bus-master DMA buffering without external SRAM.
מומלץ
Test and Measurement Instrumentation
The EP20K100EQI240-2X is a strong fit for test and measurement instruments such as logic analyzers, protocol analyzers, and ATE pin-electronics where custom timing generators and pattern sequencers must coexist with high-speed I/O. Its 250 MHz internal frequency and LVDS support enable fine-grained timing control for stimulus generation and response capture. Industrial operating range suits laboratory and field-test environments.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EP20K100EQI240-2X — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EP20K100EQC240-2X | EP20K100EQC240-3N | EP20K100EQC240-1X | EP20K100EQI240 | EP20K100EQC240-2N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 240-PQFP | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same |
| System Gates | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 |
| Logic Cells | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 |
| Total RAM Bits | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 |
| User I/O | 183 | 183 | 183 | 183 | 183 | 183 |
| Temperature Grade | Industrial (-40 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Industrial (-40 C to +85 C) | Commercial (0 C to +85 C) |
| Speed Grade | -2X | -2X | -3N (slower) | -1X (slower) | no speed suffix (slower) | -2N |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
מבדילים עיקריים
- Industrial temperature grade (-40 C to +85 C) versus commercial alternatives (לעומתEP20K100EQC240-2X)
- Higher speed grade -2X for tighter timing margins (לעומתEP20K100EQC240-3N)
- 183 user I/O plus LVDS support in a single 240-PQFP package (לעומתEP20K100EFC324-1N)
הערות תכנון
The EP20K100EQI240-2X requires a regulated 1.8 V core supply within 1.71 V to 1.89 V. Estimated: at typical dynamic utilization of 50 percent toggle rate and 25 percent logic, core current can approach 200-400 mA depending on clock frequency and embedded array block (EAB) usage. Use a low-dropout regulator with at least 10 percent headroom margin and place decoupling capacitors (0.1 µF and 10 µF bulk) close to every VCCINT pin to suppress switching noise on the core rail.
The 240-pin PQFP package has a 32x32 mm body with 0.5 mm pitch gull-wing leads. Use at least 4-layer PCB stackup with dedicated ground and power planes. All VCCINT and GND pins must be connected; missing power pins cause logic errors and may damage the device during configuration. Route JTAG signals (TCK, TMS, TDI, TDO) with 4-8 mil traces and series-termination near the FPGA to prevent configuration failures.
A common pitfall is assuming LVDS support is automatic across all I/O banks - confirm each I/O bank voltage (VCCIO) matches the downstream device supply before assigning LVDS pairs. Another frequent error is leaving MSEL pins floating; MSEL0/MSEL1 must be tied high or low to select the configuration mode (serial, parallel, or passive). Also ensure nCONFIG is held low during power-up until the 1.8 V rail stabilizes, otherwise the device may enter an undefined configuration state.
The 183 user I/O pins route through the FastTrack continuous interconnect; for LVDS signaling, keep trace lengths matched within 150 mil and use 100 ohm differential termination at the receiver. For 33 MHz PCI interfaces, observe the 32-bit bus length-matching rules and source-termination on clock lines. Always simulate signal integrity with the IBIS model provided in the Quartus II library before final layout.
מידע על תאימות
RoHS/REACH compliance not stated in distributor listings; APEX-20KE family predates widespread RoHS adoption. Not AEC-Q100 qualified - this part targets industrial/communications markets, not automotive safety.
