EP20K100EQI240-2X - APEX 20KE 100K Gates FPGA 240-PQFP | Intel
부품 번호: EP20K100EQI240-2X ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $145 | $145.00 |
| 10 | $132 | $1,320.00 |
| 100 | $118 | $11,800.00 |
| 500 | $105 | $52,500.00 |
| 1,000 | $95 | $95,000.00 |
EP20K100EQI240-2X 개요
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that combines lookup-table (LUT) logic, product-term logic, and embedded memory blocks on a single die, enabling system-on-a-programmable-chip (SOPC) integration. APEX-20KE belongs to the broader PLD taxonomy: PLD -> FPGA -> SRAM-based FPGA -> APEX-20KE family. This hierarchical integration is critical for high-density, register-intensive designs such as custom datapaths, glue logic, and DSP pre/post-processing.
Key features include the MultiCore architecture combining embedded array blocks (EABs), logic array blocks (LABs), and FastTrack interconnect, LVDS I/O support for high-speed differential signaling, and built-in boundary-scan (JTAG/IEEE 1149.1) for board-level testability. The device is specified for industrial temperature range (–40 °C to +85 °C) and supports in-system programmability via the serial configuration scheme.
The APEX-20KE architecture integrates look-up table logic with product-term logic and dedicated embedded memory, providing a flexible platform for designs that mix glue logic with on-chip buffering. The 0.22 µm process combined with the FastTrack continuous routing fabric enables predictable timing closure at clock frequencies up to the datasheet-rated maximum.
Typical applications include telecommunications line cards, industrial motor control pre-processing, custom glue logic between microprocessors and peripherals, and bridge/controller interfaces. It is widely used in legacy systems that require LVDS signaling alongside a large general-purpose logic fabric.
When designing with this device, ensure the configuration scheme (typically serial or parallel) and clock-distribution strategy align with the Quartus II design flow. The I/O banks must be powered with voltages compatible with downstream devices, and JTAG pins should be reserved for in-system programming and board-test access.
드롭인 대체품: EP20K100EQI240-2X — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP20K100EQI240-2X (동일 폼 팩터 및 풋프린트) — 차이점: Core Supply Voltage, Package, Process Technology, Device Type, Maximum Internal Frequency.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP20K100EQC240-2X
✅ 드롭인✓ 재고 있음
$39.8 / 개
데이터시트 보기 →EP20K100EQC240-3N
✅ 드롭인✓ 재고 있음
$51.84 / 개
데이터시트 보기 →EP20K100EQC240-1X
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP20K100EQI240
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP20K100EQC240-2N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP20K100EQI240-2X 최대 정격 & 전기적 특성
| Series | APEX-20KE |
| Family | APEX 20K |
| System Gates | 100,000 |
| Logic Elements / Cells | 4,160 |
| Total RAM Bits | 53,248 |
| Number of I/O | 183 |
| Core Supply Voltage | 1.8 V (1.71 V to 1.89 V) |
| Process Technology | 0.22 µm CMOS |
| Maximum Operating Frequency | 250 MHz |
| 패키지 | 240-BFQFP / 240-PQFP (32x32 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40 °C to +85 °C (Industrial) |
| I/O Standards | LVTTL, LVCMOS, LVDS, PCI, GTL+ |
| Configuration Method | Serial / Passive Parallel |
EP20K100EQI240-2X 240-bfqfp / 240-pqfp (32x32 mm) 핀 구성 가이드
EP20K100EQI240-2X(240-bfqfp / 240-pqfp (32x32 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP20K100EQI240-2X.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP20K100EQI240-2X 적합 용도: 6 애플리케이션s: Telecommunications Line Cards, Industrial Motor Control Pre-Processing, Glue Logic Between Microprocessor and Peripherals, Custom Bridge and Controller Interfaces, Legacy PCI Card Designs, Test and Measurement Instrumentation.
Telecommunications Line Cards
The EP20K100EQI240-2X suits telecom line cards thanks to its 100K system gates, 53,248 bits of embedded memory, and LVDS I/O support. Its 183 user I/O pins handle multiple backplane interfaces in parallel, while the FastTrack interconnect fabric ensures predictable timing for serializer/deserializer glue logic and framing controllers. Industrial temperature grade (-40 C to +85 C) makes it suitable for outdoor-mounted DSLAMs and central-office equipment.
추천
Industrial Motor Control Pre-Processing
The EP20K100EQI240-2X is well-matched to industrial motor-control pre-processing boards where it generates PWM timing, decodes encoder feedback, and conditions Hall-effect sensor inputs before handing off to a DSP or microcontroller. Its 1.8 V core consumes modest power while the LVCMOS I/O banks drive 3.3 V gate drivers directly. Industrial temperature grade ensures reliable operation across factory-floor ambient conditions.
추천
Glue Logic Between Microprocessor and Peripherals
The EP20K100EQI240-2X excels at custom glue-logic integration between a host microprocessor and mixed-voltage peripherals. With 183 I/O supporting LVTTL, LVCMOS, PCI, and GTL+ simultaneously, it can bridge a 3.3 V CPU bus to 5 V legacy peripherals without external level shifters. The 4,160 logic cells comfortably accommodate wide decode, handshake, and bus-arbitration functions on a single die.
추천
Custom Bridge and Controller Interfaces
The EP20K100EQI240-2X is ideal for custom bridge and controller interface designs where protocol translation is required. Its MultiCore architecture combines lookup-table logic, product-term logic, and embedded memory blocks, allowing state-machine implementations, FIFO buffering, and protocol conversion to coexist on the same die. The 250 MHz internal clock supports high-speed serial bridge channels.
추천
Legacy PCI Card Designs
The EP20K100EQI240-2X includes dedicated PCI-compatible I/O, making it an excellent choice for legacy PCI add-in card designs in industrial PCs, test instruments, and data-acquisition boards. Its 183 I/O comfortably handle a 32-bit/33 MHz PCI bus plus auxiliary peripheral interfaces, while the 53,248 bits of embedded memory provide bus-master DMA buffering without external SRAM.
추천
Test and Measurement Instrumentation
The EP20K100EQI240-2X is a strong fit for test and measurement instruments such as logic analyzers, protocol analyzers, and ATE pin-electronics where custom timing generators and pattern sequencers must coexist with high-speed I/O. Its 250 MHz internal frequency and LVDS support enable fine-grained timing control for stimulus generation and response capture. Industrial operating range suits laboratory and field-test environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP20K100EQI240-2X — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP20K100EQC240-2X | EP20K100EQC240-3N | EP20K100EQC240-1X | EP20K100EQI240 | EP20K100EQC240-2N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 240-PQFP | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same |
| System Gates | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 |
| Logic Cells | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 |
| Total RAM Bits | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 |
| User I/O | 183 | 183 | 183 | 183 | 183 | 183 |
| Temperature Grade | Industrial (-40 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Industrial (-40 C to +85 C) | Commercial (0 C to +85 C) |
| Speed Grade | -2X | -2X | -3N (slower) | -1X (slower) | no speed suffix (slower) | -2N |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
주요 차별점
- Industrial temperature grade (-40 C to +85 C) versus commercial alternatives (vs EP20K100EQC240-2X)
- Higher speed grade -2X for tighter timing margins (vs EP20K100EQC240-3N)
- 183 user I/O plus LVDS support in a single 240-PQFP package (vs EP20K100EFC324-1N)
설계 노트
The EP20K100EQI240-2X requires a regulated 1.8 V core supply within 1.71 V to 1.89 V. Estimated: at typical dynamic utilization of 50 percent toggle rate and 25 percent logic, core current can approach 200-400 mA depending on clock frequency and embedded array block (EAB) usage. Use a low-dropout regulator with at least 10 percent headroom margin and place decoupling capacitors (0.1 µF and 10 µF bulk) close to every VCCINT pin to suppress switching noise on the core rail.
The 240-pin PQFP package has a 32x32 mm body with 0.5 mm pitch gull-wing leads. Use at least 4-layer PCB stackup with dedicated ground and power planes. All VCCINT and GND pins must be connected; missing power pins cause logic errors and may damage the device during configuration. Route JTAG signals (TCK, TMS, TDI, TDO) with 4-8 mil traces and series-termination near the FPGA to prevent configuration failures.
A common pitfall is assuming LVDS support is automatic across all I/O banks - confirm each I/O bank voltage (VCCIO) matches the downstream device supply before assigning LVDS pairs. Another frequent error is leaving MSEL pins floating; MSEL0/MSEL1 must be tied high or low to select the configuration mode (serial, parallel, or passive). Also ensure nCONFIG is held low during power-up until the 1.8 V rail stabilizes, otherwise the device may enter an undefined configuration state.
The 183 user I/O pins route through the FastTrack continuous interconnect; for LVDS signaling, keep trace lengths matched within 150 mil and use 100 ohm differential termination at the receiver. For 33 MHz PCI interfaces, observe the 32-bit bus length-matching rules and source-termination on clock lines. Always simulate signal integrity with the IBIS model provided in the Quartus II library before final layout.
규정 준수 정보
RoHS/REACH compliance not stated in distributor listings; APEX-20KE family predates widespread RoHS adoption. Not AEC-Q100 qualified - this part targets industrial/communications markets, not automotive safety.
