EP4CE15F23C8LN - 15K Logic FPGA, 484-BGA | Intel
MPN: EP4CE15F23C8LN ✓ פעילEP4CE15F23C8LN סקירה
A field-programmable gate array, or FPGA, is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, memory, signal paths, and I/O into a parallel implementation of digital functions. Compared with a fixed application-specific integrated circuit, an FPGA permits design changes, shorter development cycles, hardware customization, and field configurability.
The EP4CE15F23C8LN is identified as an EP4CE15 device in the F23 package configuration. The manufacturer product listing for the closely related EP4CE15F23C8N places it in the Cyclone IV E family and exposes ordering-specific electrical, packaging, and performance attributes. The verified distributor listing for the LN variant identifies 343 I/O in a 484-BGA package, while the device summary reports 15,408 logic elements.
The 1.2 V value identifies the device's stated supply specification, but it should not by itself be treated as a complete power-rail design instruction. Cyclone IV E devices normally require multiple power rails for core and I/O operation, so board designers should use the manufacturer datasheet and pin-connection guidelines to determine which supplies connect to each ball, including configuration, core, and I/O resources.
Typical uses include industrial control logic, protocol bridges, data-acquisition front ends, embedded communications, motor and motion-control systems, and general-purpose digital prototyping. Its 343 I/O provide substantial board-level connectivity, while 15,408 logic elements support parallel datapaths, state machines, control logic, and modest embedded processing arrangements.
Board planning requires careful treatment of the 484-ball BGA footprint, power delivery, decoupling, configuration support, and high-speed signal routing. Designers should preserve the manufacturer's ball-map assignments, provide all required power rails, follow recommended via-in-pad or escape-routing guidance, and validate signal integrity when differential or high-speed interfaces are used.
This page consolidates the confirmed device identifiers, package details, logic and I/O counts, sourcing facts, and engineering considerations around the EP4CE15F23C8LN. It also distinguishes direct order-code comparisons from broader FPGA alternatives so that PCB, configuration, software-tool, and qualification compatibility are reviewed before any replacement is approved.
חלופות תחליף ישיר עבור EP4CE15F23C8LN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EP4CE15F23C8LN (אותו גורם צורה וטביעת רגל) — שונים ב Logic Elements, Mounting Type, Device Type, Package, Process Technology.
EP4CE15F23C8N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE15F23C8LN דירוגים מרביים ומאפיינים חשמליים
| Device Type | Cyclone IV E field-programmable gate array |
| Logic Elements | 15,408 logic elements |
| Logic Blocks | 3,276 logic blocks |
| Embedded Memory | 516,096 bits |
| Multiplier Blocks | 343 multiplier blocks |
| User I/O | 343 I/O |
| מתח אספקה | 1.2 V |
| מארז | 484-ball BGA |
| Package Pin Count | 484 balls |
| Device Family | Cyclone IV E |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של EP4CE15F23C8LN 484 balls
תצורת פינים עבור EP4CE15F23C8LN (מארזת 484 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EP4CE15F23C8LN.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EP4CE15F23C8LN מתאים עבור 6 יישוםs: Industrial Control Logic, Communications and Protocol Bridge, Data Acquisition Front End, Motion and Motor Control, Test and Measurement Equipment, Embedded Communication Equipment.
Industrial Control Logic
The EP4CE15F23C8LN fits industrial control systems that combine machine sequencing, digital I/O, interlocks, counters, and communication bridges in one programmable device. Its 15,408 logic elements provide substantial parallel processing capacity, while 343 I/O support sensors, actuators, status indicators, and field-bus transceivers. The 484-ball BGA also leaves room for dedicated power, configuration, and high-speed interface connections. A design should use the exact manufacturer ball map, define each I/O voltage domain, and reserve decoupling and test access. Before production release, verify the required temperature grade, functional-safety obligations, electrical margins, and configuration behavior for the deployed environment.
Communications and Protocol Bridge
The EP4CE15F23C8LN can implement communication adaptation, framing, filtering, and protocol conversion between systems with incompatible interfaces. Its 3,276 logic blocks can support parallel datapaths and state-machine logic, while 343 I/O allow several serial or parallel links to be consolidated on one device. Engineers can implement clock-domain crossing, FIFO-based buffering, and low-latency packet handling within the available programmable resources. High-speed interfaces still require careful clock planning, controlled impedance routing, and verified I/O voltage standards. The Cyclone IV E architecture, configuration method, and intended clocking scheme should be validated with the relevant Intel design tools before schematic and layout release.
Data Acquisition Front End
The EP4CE15F23C8LN is relevant to data-acquisition front ends that require deterministic sampling control, channel multiplexing, digital filtering, and data formatting. The available 15,408 logic elements can implement parallel control and arithmetic functions, and the 343 I/O can connect converters, clocks, triggers, and status signals. Using the same programmable fabric for acquisition control and data reduction can reduce the number of discrete logic devices and simplify board partitioning. Analog front-end design remains separate, so engineers should define amplifier bandwidth, converter interface voltage, clock jitter, and channel count first. Power sequencing, ground partitioning, and analog-versus-digital isolation are essential because the 1.2 V device specification alone does not describe the complete board power architecture.
Motion and Motor Control
The EP4CE15F23C8LN can implement deterministic motor-control logic, including position counting, direction sequencing, step-command generation, fault capture, and supervisory interlocks. Its 15,408 logic elements are suitable for parallel control algorithms, while 343 I/O provide connectivity for encoder inputs, pulse-width-modulated outputs, brake signals, and status feedback. The device's BGA package permits dense routing among logic and external interface circuitry. For motor systems, the design must separate noisy power and switching paths from sensitive control signals and account for regenerative energy, ground offsets, and protection components. Confirm timing margins, I/O standards, and thermal performance with the actual motor driver, encoder, and power-conversion stage rather than relying on FPGA resource counts alone.
Test and Measurement Equipment
The EP4CE15F23C8LN suits programmable test and measurement systems requiring flexible sequencing, pattern generation, timing control, and result capture. Its 15,408 logic elements and 343 I/O can support parallel test channels, instrument control, and data-format conversion while a single programmable device adapts to different test sequences. The 484-ball BGA supports dense connections among control logic, memory interfaces, and external converters. A practical implementation should define acquisition timing, trigger latency, calibration paths, and synchronization before assigning pins. Clock jitter, output timing uncertainty, thermal behavior, and test-point access should be evaluated at system level. Configuration should also be designed to avoid disturbing measurement sequencing during startup or reload events.
Embedded Communication Equipment
The EP4CE15F23C8LN can support embedded network, security, and interface nodes that need programmable packet handling, local storage, and multiple peripheral connections. The 516,096-bit embedded-memory figure provides a defined resource baseline for buffers and control structures, while the 343 I/O can connect transceivers, memories, status interfaces, and management signals. Designers can implement custom framing, filtering, protocol conversion, or data pre-processing without committing to a fixed ASIC. In a communication chassis, maintain controlled clock distribution, isolate high-speed routes, and budget the device's core and I/O current under worst-case switching activity. Use the manufacturer power-estimation workflow and complete board validation because utilization-dependent activity can materially change system power and thermal performance.
נתוני עזר הנדסיים עבור EP4CE15F23C8LN — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EP4CE15F23C8N |
|---|---|---|
| Package | 484-ball BGA | 484-ball BGA |
| Brand | Intel | Intel |
| Device Family | Cyclone IV E | Cyclone IV E |
| Order Code | EP4CE15F23C8LN | EP4CE15F23C8N; final suffix differs |
מבדילים עיקריים
- Exact LN ordering identity (לעומתEP4CE15F23C8N)
- Substantial programmable logic capacity (לעומתEP4CE15F23C8N)
- High board-level connectivity (לעומתEP4CE15F23C8N)
הערות תכנון
Do not treat the listed 1.2 V supply specification as the complete power plan. Build the rail table from the Cyclone IV E device documentation, identify every core, I/O, and auxiliary supply, and include tolerance, sequencing, current, decoupling, and power-good requirements. Estimate worst-case consumption with realistic I/O switching and clock activity, then size the regulators and copper paths for the maximum operating condition.
Preserve the manufacturer 484-BGA footprint and assign every ball from the exact device ball map. Place local decoupling at the associated supply and ground balls, provide adequate plane connectivity, and follow the recommended escape-via arrangement. Because the BGA uses dense ball spacing, verify drill and pad dimensions with the assembly capability of the PCB supplier before fabrication and include thermal-relief or solid-plane patterns according to the power and ground assignments.
Separate configuration signals, high-speed interfaces, sensitive clock routing, and general user I/O according to their switching activity. Use a continuous clock or controlled clock distribution strategy, avoid unnecessary stubs, and apply impedance-controlled routing for external interfaces. Keep switching I/O and power-conversion return currents away from sensitive clock and reference paths, while preserving the ground-plane continuity required by the device's return-current requirements.
Do not substitute EP4CE15F23C8N solely because it shares the EP4CE15 F23 family designation. Review the complete ordering table for temperature grade, speed, qualification, and other suffix-dependent characteristics. Also avoid treating a generic FPGA schematic as a valid ball assignment; configuration pins, power balls, ground balls, and I/O assignments must be checked against the exact manufacturer documentation.
מידע על תאימות
The manufacturer ordering information for the EP4CE15 F23 device should be used to confirm package, environmental, and ordering-code qualifications. No explicit compliance declarations were available for the EP4CE15F23C8LN.