Maxim Integrated

ICL7652CWE+ - Zero-Drift 450kHz Amplifier | Maxim Integrated

MPN: ICL7652CWE+ ✓ פעיל
16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ICL7652CWE+ סקירה

The Maxim Integrated ICL7652CWE+ is a zero-drift operational amplifier with one amplifier circuit, a gain-bandwidth product of 450 kHz, and a slew rate of 500 mV/µs, packaged in a 16-pin SOIC. The chopper-stabilized architecture is intended for precision analog signal chains that require low offset and low drift while operating from a single supply.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. A precision operational amplifier adds low input offset, low bias current, stable bias behavior, and predictable operation over temperature. Within the broader semiconductor hierarchy, the ICL7652CWE+ belongs to the precision-amplifier family, where chopper stabilization reduces low-frequency error that can dominate slow measurement and control systems.

The zero-drift architecture is the principal feature of this device. Chopper stabilization continuously corrects offset voltage and drift errors that would otherwise change with time and temperature. The 450 kHz gain-bandwidth product provides useful bandwidth for low-frequency precision loops, while the 500 mV/µs slew rate supports faster signal transitions. The single-amplifier configuration reduces package count when one precision channel is required rather than a matched dual or quad device.

The ICL7652CWE+ operates as a general-purpose precision amplifier around a single supply, making it suitable for sensor interfaces, current-sense amplifiers, bridge amplifiers, and instrumentation stages. Its SOIC-16 surface-mount package also supports automated assembly and compact analog boards. Designers should evaluate input common-mode range, output swing, offset specifications, noise behavior, and stability against the operating signal before finalizing a high-precision application.

Typical uses include low-level sensor signal conditioning, precision current measurement, strain-gauge and bridge excitation systems, low-frequency active filters, and laboratory instrumentation. In a current-sense design, the amplifier can amplify the small voltage generated across a shunt resistor while its low-drift behavior helps preserve measurement accuracy as temperature changes. In a bridge circuit, the same approach supports accurate conditioning of small differential signals.

A key design consideration is chopper-related switching energy at the amplifier output. Although the architecture improves DC precision, the output may contain narrow ripple components that should be filtered when the downstream circuit requires a spectrally quiet analog rail. Decoupling, grounding, and feedback-network layout remain important for maintaining low offset and stable closed-loop behavior.

This page combines the ICL7652CWE+ package and performance information with drop-in comparison candidates, precision-amplifier application guidance, and practical design notes. The ICL7652CWE+ is a 16-SOIC precision amplifier for engineers designing compact, low-frequency, high-accuracy analog signal-conditioning systems.

חלופות תחליף ישיר עבור ICL7652CWE+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ICL7652CWE

✅ Drop-In
📦 16-pin SOIC
Uses the same 16-SOIC footprint and zero-drift amplifier function; the base suffix differs from the target plus designation, with commercial and environmental attributes requiring final ordering-guide confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

ICL7652CWE+ דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Zero-drift chopper-stabilized operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 450 kHz
Slew Rate 500 mV/µs
מארז 16-pin SOIC
Slew Rate 500 mV/µs
סוג הרכבה Surface mount

מדריך תצורת פינים של ICL7652CWE+ 16-pin soic

תצורת פינים עבור ICL7652CWE+ (מארזת 16-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 16-pin soic עבור ICL7652CWE+

אין נתוני פריסת פינים מפורטים עבור ICL7652CWE+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ICL7652CWE+ מתאים עבור 6 יישוםs: Precision Current Sensing, Strain Gauge Bridge Signal Conditioning, Low-Level Sensor Instrumentation, Precision Active Filtering, Laboratory Measurement Front End, Precision Control Feedback Loop.

⚡

Precision Current Sensing

The ICL7652CWE+ suits low-level current measurement when a shunt resistor produces only a small differential voltage. Its zero-drift chopper-stabilized architecture is intended to reduce offset error that would otherwise change with time and temperature, while the 450 kHz gain-bandwidth product supports closed-loop gain at typical low-frequency sensing rates. Place the amplifier across the shunt in a differential configuration and keep input and return paths short. The 500 mV/µs slew rate allows the output to respond to current steps, but the final gain must preserve common-mode and output-swing margins. System accuracy also depends on shunt tolerance, amplifier offset, bias current, and post-amplifier filtering.

🏭

Strain Gauge Bridge Signal Conditioning

The ICL7652CWE+ is appropriate for amplifying the small differential output of a strain-gauge or resistive bridge. Zero-drift stabilization helps maintain accuracy in slow mechanical measurements where temperature variation could otherwise shift the amplifier's operating point. The 450 kHz gain-bandwidth product is suitable for typical low-frequency bridge dynamics, while the 500 mV/µs slew rate helps minimize settling after range changes. Circuit design should account for excitation drift, bridge common-mode voltage, input bias current, and output range. A low-pass filter may be added after the amplifier to remove chopping ripple when the measurement bandwidth is much lower than the amplifier bandwidth.

🧩

Low-Level Sensor Instrumentation

The ICL7652CWE+ can serve as the first gain stage for slow sensors that generate millivolt-level signals, including temperature, pressure, and chemical sensors with resistive outputs. Its zero-drift architecture targets the offset stability needed for measurements taken over long intervals, and its single-amplifier 16-SOIC format keeps the circuit compact. The 450 kHz gain-bandwidth product supports moderate closed-loop bandwidth without requiring a high-speed amplifier. Designers should verify that the sensor output remains inside the amplifier's input common-mode range and that the selected gain does not exceed output-swing limits. Guard traces, grounded returns, and short feedback paths are particularly important when input signals approach the measurement floor.

🔧

Precision Active Filtering

The ICL7652CWE+ is suitable for low-frequency active filters where low offset and low drift help preserve the filter's DC operating point. Its 450 kHz gain-bandwidth product permits useful closed-loop bandwidth for cutoff frequencies below the amplifier's unity-gain frequency, and the 500 mV/µs slew rate reduces distortion during moderate signal transitions. Component tolerances should be considered because they can dominate filter accuracy, and the amplifier must remain stable with the selected feedback network and capacitive loading. A common application is filtering the output of a slow sensor before digitization. Chopper ripple at the output may require additional filtering when the downstream converter has a narrow noise band.

📊

Laboratory Measurement Front End

The ICL7652CWE+ fits laboratory instruments that amplify small dc or low-frequency signals while requiring stable gain over time. Zero-drift operation can reduce calibration drift in bridge, potentiometer, and reference-voltage measurements, while the 450 kHz gain-bandwidth product gives sufficient bandwidth for many general-purpose measurement channels. The design should compare its offset and drift requirements with broadband noise and settling behavior. Use a shielded PCB section for high-impedance inputs, provide local decoupling, and account for parasitic capacitance around high-gain feedback nodes. A following filter or ADC driver may be needed when the instrument requires a particularly quiet output spectrum.

⚙️

Precision Control Feedback Loop

The ICL7652CWE+ can be evaluated for slow closed-loop control paths where the controller compares a small error signal against a reference. The zero-drift architecture helps minimize input-offset movement, which can appear as steady-state error in an integrator or high-gain controller. The 450 kHz gain-bandwidth product provides useful loop bandwidth for slow actuator or plant dynamics, while the 500 mV/µs slew rate supports changes in controller output. Stability must be checked with the actual feedback network, sensor capacitance, and actuator loading. Designers should also include a recovery path for power-up transients and ensure that the output cannot exceed the actuator's allowed voltage range.

סיכום מוצרים מומלצים

ICL7653 Nearby Maxim Integrated precision-amplifier family member בשימוש ב-: Precision Current Sensing, Strain Gauge Bridge Signal Conditioning, Low-Level Sensor Instrumentation, Precision Active Filtering, Laboratory Measurement Front End, Precision Control Feedback Loop ICL7652CWE Closely related single zero-drift amplifier בשימוש ב-: Precision Current Sensing, Strain Gauge Bridge Signal Conditioning, Low-Level Sensor Instrumentation, Precision Active Filtering, Laboratory Measurement Front End, Precision Control Feedback Loop
What is the ICL7652CWE+?
The ICL7652CWE+ is a single-circuit, zero-drift operational amplifier from Maxim Integrated with a 450 kHz gain-bandwidth product and a 500 mV/µs slew rate. According to the manufacturer datasheet, it uses a chopper-stabilized architecture for reducing offset voltage and drift. The device is offered in a 16-pin SOIC package and is intended for precision low-frequency analog signal-conditioning applications.
Where can I download the ICL7652CWE+ datasheet PDF?
The ICL7652CWE+ datasheet PDF can be downloaded through the Maxim Integrated datasheet link on this page. The document covers the chopper-stabilized operational amplifier, electrical characteristics, application information, and pin descriptions for the 16-SOIC package. Confirm the operating limits, supply range, common-mode range, and recommended application circuit against the manufacturer document before final PCB release.
Where can I find the ICL7652CWE+ pinout?
The ICL7652CWE+ pinout is defined in the manufacturer datasheet under the pin-description and package-information sections. This 16-pin SOIC device includes power, ground, input, output, and configuration connections described by Maxim Integrated. Use the datasheet pin table when assigning PCB nets because a complete pin-by-pin transcription is not maintained on this page.
What are the key specifications of ICL7652CWE+ that engineers should know?
The ICL7652CWE+ is a single zero-drift operational amplifier with a 450 kHz gain-bandwidth product, a 500 mV/µs slew rate, and a 16-pin SOIC package. According to the Maxim Integrated datasheet, its chopper-stabilized architecture targets low input offset voltage and low drift. Designers should also review supply voltage, common-mode range, output swing, input bias current, and noise specifications for their exact operating condition.
Is ICL7652CWE+ suitable for precision sensor measurement?
The ICL7652CWE+ is suitable for many low-level precision sensor measurements because its zero-drift architecture reduces time- and temperature-dependent offset error. With a 450 kHz gain-bandwidth product, it can process slow sensor signals while providing useful loop bandwidth for filtering and gain stages. The final design must also satisfy the sensor output range, amplifier supply limits, input common-mode range, and required settling time.
How does ICL7652CWE+ compare with ICL7652CWE?
ICL7652CWE+ and ICL7652CWE are both listed as single zero-drift amplifiers in the 16-SOIC package, and a technical comparison identifies their terminals, packages, and principal performance characteristics as consistent. The most important procurement difference is the exact orderable suffix. Engineers should verify the lead-free, environmental, and packaging attributes for the specific suffix rather than assuming that every commercial detail is identical.
ICL7652CWE+ vs ICL7652CWE+T - which should I select?
ICL7652CWE+ and ICL7652CWE+T refer to closely related orderable variants, with the suffix indicating a commercial or packaging distinction. For PCB compatibility, both use the same 16-SOIC device family, but the assembly method and ordering requirements may differ. Choose the suffix that matches the required production packing and environmental specification, and verify the complete ordering guide before substitution.
When should I choose ICL7652CWE+ over another precision amplifier?
Choose the ICL7652CWE+ when the design needs a single zero-drift amplifier in a 16-SOIC package and can operate within its voltage, common-mode, output-swing, and frequency limits. It is especially appropriate for slow precision measurements where reducing offset drift is more important than minimizing broadband noise. A wider-bandwidth low-noise amplifier may be preferable for faster signals or applications dominated by broadband noise.
What can replace the ICL7652CWE+?
The closest drop-in candidate is the ICL7652CWE, which uses the same 16-SOIC footprint and closely matches the target's zero-drift electrical function. The ICL7652CWE+T is also a closely related orderable variant, although it differs in packaging notation. No additional verified cross-brand drop-in replacements were identified, so any substitution must be checked against pin functions, supply range, common-mode range, offset, drift, and stability.
Is ICL7652CWE+ the same as ICL7652CWE?
The ICL7652CWE+ is closely related to the ICL7652CWE and is listed with the same 16-SOIC zero-drift amplifier configuration. The plus designation identifies an orderable variant with potentially different environmental or terminal-finish attributes, while the base MPN does not carry that designation. Use the manufacturer ordering information to confirm regulatory, lead-free, and packaging requirements before treating them as interchangeable.
Where can I buy ICL7652CWE+ online?
Use the Request a Quote form on this page to request ICL7652CWE+ availability, lot-size requirements, and a formal quotation. The form is the preferred route for checking current inventory, minimum order quantity, and delivery scheduling. Provide the exact ICL7652CWE+ suffix and your required production quantity so the quotation matches the intended device and packaging.
What is the price of ICL7652CWE+?
Submit the ICL7652CWE+ quantity and required shipping destination through the Request a Quote form on this page for a current quotation. The form supports direct commercial review without embedding a potentially stale price into the technical page. Include production volume, target date, and packaging requirements so the quotation reflects the actual order rather than a generic single-unit evaluation.
What is the lead time for ICL7652CWE+?
The current lead time for ICL7652CWE+ should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, scheduled production, package configuration, and inventory position, so a generic timing statement would not represent a committed delivery date. Include your required quantity, delivery location, and target date in the request for a responsive answer.
Is ICL7652CWE+ in stock?
Current ICL7652CWE+ inventory should be checked through the Request a Quote form on this page. Availability can change with order size and purchasing activity, and a quote request provides confirmation against the exact suffix and quantity you need. If a large production order is planned, request a supply schedule in addition to the immediate availability confirmation.
What is the best Maxim Integrated equivalent for ICL7652CWE+?
The ICL7652CWE is the closest verified Maxim Integrated alternative because it retains the same 16-SOIC footprint and single zero-drift amplifier configuration. The ICL7652CWE+T provides another closely related orderable option when its production packing matches the design. No verified cross-brand equivalent was identified, so engineers should not assume a competing amplifier is a true drop-in replacement without checking every electrical and pin function.

נתוני עזר הנדסיים עבור ICL7652CWE+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ICL7652CWE+ for precision low-frequency analog measurements where offset drift is a major concern and a single amplifier in a 16-SOIC package is sufficient. Its 450 kHz gain-bandwidth product and 500 mV/µs slew rate make it suitable for sensor fronts ends, bridge amplifiers, current measurement, active filtering, and slow control loops. The ICL7652CWE is the closest same-package option when the base suffix meets the required commercial and environmental configuration. Verify common-mode range, output swing, bias current, offset, drift, and stability for any candidate. A low-noise amplifier may be better when fast signals or broadband noise dominate, while a dual or quad device may be preferable when board area favors consolidating multiple amplifier channels. Do not treat differently packaged amplifier families as drop-in replacements without a complete electrical and pin-level review.

השוואה עם חלופות

פרמטר מוצר זה ICL7652CWE
Brand Maxim Integrated Maxim Integrated
Package 16-pin SOIC 16-pin SOIC
Amplifier Type Zero-drift chopper-stabilized operational amplifier Zero-drift operational amplifier
Number of Circuits 1 circuit 1 circuit
Mounting Type Surface mount Surface mount

מבדילים עיקריים

  • Zero-drift precision architecture in a single-amplifier package (לעומתICL7652CWE)
  • Useful precision-stage bandwidth (לעומתICL7652CWE)
  • Single-circuit package reduces board area (לעומתICL7652CWE)

הערות תכנון

Treat the zero-drift amplifier as both a precision DC stage and a wideband signal path. Keep the feedback loop compact, avoid long high-impedance input traces, and use a quiet ground reference. Chopper-stabilized devices can produce narrow-band ripple near their chopping frequency, so verify the downstream bandwidth with an oscilloscope and spectrum measurement rather than assuming that low offset also means low output noise.

Place the bypass capacitor directly between the power and ground pins, and provide a low-impedance return from the capacitor to the device ground. High-gain precision stages are sensitive to parasitic capacitance and leakage, so avoid routing input and feedback nets beneath noisy switching nodes. If the input source has high source impedance, include guarding or shielding and verify that board contamination does not dominate the offset error.

Do not select the amplifier from bandwidth alone. Verify supply voltage, input common-mode range, output swing, input bias current, offset, drift, noise, and stability with the intended feedback network. The 450 kHz gain-bandwidth product does not guarantee usable closed-loop bandwidth at every gain. Likewise, confirm that any output filtering for chopping ripple does not add unacceptable phase shift to a feedback loop.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes are not explicitly stated in the available manufacturer and distributor information. The plus suffix should be checked against the Maxim Integrated ordering information before making a lead-free or environmental-compliance claim.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ICL7652CWE+ datasheet ICL7652CWE+ pinout ICL7652CWE+ datasheet pdf ICL7652CWE+ equivalent ICL7652CWE+ replacement ICL7652CWE+ vs ICL7652CWE ICL7652CWE+ price ICL7652CWE+ stock Maxim Integrated ICL7652CWE+ ICL7652 zero drift amplifier ICL7652 450kHz 16-SOIC ICL7652CWE+ precision sensor ICL7652CWE+ current sensing ICL7652CWE+ amplifier schematic

רכיבים ומונחים קשורים

Maxim Integrated ICL7652CWE+ ICL7652CWE ICL7652CWE+T ICL7653 zero-drift amplifier chopper-stabilized operational amplifier precision amplifier operational amplifier analog integrated circuit semiconductor input offset voltage input offset drift gain-bandwidth product slew rate input common-mode range output voltage swing 16-pin SOIC SOIC package family surface mount SMD current sensing strain-gauge bridge sensor signal conditioning active filter
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר