ICS527R-02 - 160MHz Zero-Delay Clock Slicer | Renesas
MPN: ICS527R-02 ✓ פעילICS527R-02 סקירה
A clock slicer is a specialized timing IC that divides and recombines clock signals to provide adjustable phase relationships. Clock slicers sit within the clock and timing hierarchy as clock buffers and fanout devices, where low skew and predictable edge alignment are more important than simply regenerating a clock. The ICS527-02 family uses a PLL-based architecture to create zero-skew PECL-to-CMOS clocking relationships for communications, processor, and data-conversion systems.
The ICS527R-02 supports a maximum operating frequency of 160 MHz and has one clock circuit. Its user-configurable reference and feedback dividers allow multiplication or division of the input clock, while the zero-delay architecture minimizes the skew between the relevant rising edges. PECL input support is useful in high-speed telecommunications and industrial clocking systems where the source clock is already distributed using ECL-family logic levels.
Operationally, the device accepts a PECL reference clock and returns related CMOS clock outputs. The two CMOS outputs support fanout and clock distribution, reducing the need for separate logic buffers when several domains require the same derived timing signal. Zero-delay operation is intended for systems in which source and feedback clocks must be phase-aligned with very little edge displacement.
Typical uses include telecom line-card clocking, data-converter clock generation, processor reference-clock distribution, network-interface timing, and industrial control systems. The 160 MHz ceiling makes the ICS527R-02 most appropriate for designs operating below that limit, while the 28-SSOP package supports compact, surface-mounted assemblies.
PCB implementation requires careful treatment of high-speed clock inputs and outputs. Keep PECL traces short, provide a continuous reference plane, avoid stubs, and place termination and decoupling components close to the device. Confirm input/output timing, divider ratios, and supply sequencing against the manufacturer datasheet before releasing production artwork.
This product page combines the manufacturer function description with package, frequency, interface, and architecture details, then adds application guidance, drop-in replacement limits, comparison parameters, and practical layout considerations. These engineering-oriented notes help distinguish a true PCB-compatible replacement from a merely similar clock-buffer product.
חלופות תחליף ישיר עבור ICS527R-02 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
527R-02LF
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS527R-02T
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS527R-01I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS527R-02 מפרטים
| Product Type | User-configurable clock slicer and zero-delay buffer |
| Maximum Frequency | 160 MHz |
| Number of Circuits | 1 circuit |
| Input Logic Type | PECL |
| Output Logic Type | CMOS |
| Input-to-Output Ratio | 1:2 |
| PLL | Yes |
| Architecture | PLL-based clock slicer with zero-skew alignment |
| מספר יציאות | 2 true outputs |
| Number of Inverted Outputs | 0 inverted outputs |
| מארז | 28-SSOP, 0.154 inch width, 3.90 mm width |
| סוג הרכבה | Surface mount |
| Edge Alignment | Rising edges aligned on PECLIN and FBIN |
| תצורת מוצא | Multiplied or divided from the PECL input clock |
מדריך תצורת פינים של ICS527R-02 28-ssop, 0.154 inch width, 3.90 mm width
תצורת פינים עבור ICS527R-02 (מארזת 28-ssop, 0.154 inch width, 3.90 mm width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ICS527R-02.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ICS527R-02 מתאים עבור 6 יישוםs: Telecommunications Clock Distribution, Data Converter Clocking, Processor Reference Clock, Industrial Control Timing, Audio Converter Clocking, Network Interface Timing.
Telecommunications Clock Distribution
The ICS527R-02 fits telecom clocking systems that receive a PECL reference and require related CMOS clocks with controlled edge relationships. Its maximum frequency of 160 MHz supports high-speed line-card, framer, and serial-interface timing, while two true outputs can distribute the derived clock within one subsystem. Configure the reference and feedback dividers for the required relationship, then keep PECLIN and FBIN routes short over a continuous ground plane. The main engineering trade-off is that a multiplier or divider must remain within the 160 MHz operating ceiling.
מומלץ
Data Converter Clocking
Use the ICS527R-02 when an ADC or DAC system needs a configurable CMOS clock derived from a PECL source. The zero-delay slicer architecture can align PECLIN and FBIN rising edges, helping create the exact related clock needed by sampling or conversion timing. Its 160 MHz maximum frequency covers many moderate- and high-speed converters, and the two outputs can feed converter and supporting digital logic. Select divider values that keep every derived clock below the operating limit and preserve the required conversion sampling relationship.
מומלץ
Processor Reference Clock
The ICS527R-02 can derive and distribute a processor-related clock from a PECL-compatible source. Two true CMOS outputs allow a single device to feed related clock domains, reducing the number of separate buffers when the timing relationship must be controlled. The PLL-based divider arrangement is valuable when the downstream processor requires a ratio other than 1:1. Verify acquisition and hold requirements at the receiver, maintain continuous return paths, and ensure the selected output ratio does not exceed the 160 MHz device limit.
מומלץ
Industrial Control Timing
Industrial control modules can use the ICS527R-02 when multiple subsystems require related clock outputs and the source interface is PECL. The configurable divider ratios help adapt one incoming clock to several timing domains, while the zero-skew architecture supports predictable alignment. Operating below 160 MHz provides suitable performance for many control, monitoring, and communication subsystems. In factory equipment, isolate clock routing from noisy power stages, provide local decoupling, and validate timing margins over temperature and process variations.
מומלץ
Audio Converter Clocking
The ICS527R-02 is appropriate for audio systems that require a CMOS clock with a controlled relationship to a PECL-derived reference. Its two outputs can feed related converter and digital sections, and its user-configurable dividers support clock-ratio selection where a simple fanout is insufficient. For audio converters, keep the clock source and return path compact, minimize coupling from switching regulators and digital clocks, and verify the required sampling ratio. Confirm jitter performance for the complete clock-generation path rather than relying only on the 160 MHz frequency rating.
מומלץ
Network Interface Timing
The ICS527R-02 can support network-interface subsystems that need a PECL input converted into related CMOS clocks for controller, transceiver, or serializer logic. The maximum 160 MHz operating frequency is suitable for many interface clock trees, and two outputs reduce fanout complexity when the destinations must remain phase-related. Control impedance, avoid unnecessary vias, and separate the clock route from high-energy switching nodes. Validate setup and hold at each receiver because device skew and board routing contribute to the total timing margin.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ICS527R-02 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | 527R-02LF | ICS527R-02T | ICS527R-01I |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 28-SSOP | 28-SSOP - same package | 28-SSOP - same package | 28-SSOP - same package |
| Product Type | Clock slicer and zero-delay buffer | Clock slicer and zero-delay buffer | Clock slicer and zero-delay buffer | Clock slicer and zero-delay buffer |
| Divider Configuration | -02 family configuration | -02 family configuration | -02 family configuration | -01 family configuration |
מבדילים עיקריים
- Higher documented maximum frequency than 527R-02LF (לעומת527R-02LF)
- Direct ordering within the same -02 configuration (לעומתICS527R-02T)
- Same package and core clock-slicer architecture as the -01 family (לעומתICS527R-01I)
הערות תכנון
Treat PECLIN, FBIN, and the CMOS clock outputs as high-speed nets. Route them over a continuous ground plane, minimize vias and stubs, and keep input termination close to the receiving pin. Place the PLL support and bypass components according to the manufacturer reference design. The zero-delay relationship is measured at the device pins, so asymmetric traces can reintroduce board skew even when the chip is configured correctly.
Use the manufacturer's recommended supply topology and place local high-frequency bypass capacitance immediately across the appropriate supply and ground pins. Keep switching-regulator routing and magnetic fields away from FBIN because feedback-edge displacement can affect divider operation and alignment. Confirm capacitor voltage rating, DC-bias behavior, and stability requirements using the datasheet rather than substituting ceramic types by capacitance alone.
Do not interpret the 160 MHz rating as permission to drive every divider configuration at 160 MHz. Calculate the highest internal or output frequency from the selected reference and feedback ratios and compare it with all timing and operating limits. Also verify that the chosen suffix matches the required temperature grade, packing, and qualification. Reordering rules and suffix meanings must be checked in the current manufacturer ordering information.
מידע על תאימות
The verified records do not include definitive environmental or automotive qualification declarations for this exact orderable part. Request the current manufacturer product-compliance documents before production release.