ICS570AIT - 170MHz Zero-Delay Clock Buffer | Renesas
MPN: ICS570AIT ✓ פעילICS570AIT סקירה
A zero-delay buffer is a clock-management IC that reproduces an input clock at its outputs while compensating for internal propagation delay through a phase-locked loop. Positioned within the hierarchy of clock and timing ICs, a ZDB complements ordinary clock buffers by allowing a system to obtain several low-skew copies of a reference clock. Fanout distribution expands one source into multiple synchronized loads for processors, memory interfaces, communications equipment, and embedded control systems.
The ICS570AIT supports clock frequencies up to 170 MHz and includes spread-spectrum clock generation for reducing narrowband EMI emissions in sensitive equipment. Its four CMOS outputs provide one-to-four fanout capability, while the PLL-based zero-delay architecture supports predictable clock relationships between distributed loads. The 8-pin SOIC package measures approximately 3.90 mm in width and accepts a 0.154-inch lead pitch.
The A-version supply recommendation distinguishes ICS570AIT from the 3.3 V B-version. Designers must therefore verify supply rails, input levels, output loading, and downstream input thresholds before applying the device. Because the part distributes rather than originates the reference clock, input slew rate, return path, and output termination remain important aspects of the implementation.
Typical applications include processor and memory clock distribution, communications-interface clock fanout, embedded system clock trees, and EMI-sensitive digital equipment. Spread-spectrum operation is particularly relevant when the reference clock feeds high-speed digital circuitry and reduced spectral concentration is desirable without eliminating the fundamental clock.
For reliable implementation, use the pin-description table and typical application circuit in the manufacturer datasheet when assigning PCB tracks. Keep the reference clock and output routes short, provide a continuous return plane, and validate timing at the actual device pins because package and trace delay can affect a nominal zero-delay design.
This product reference combines the device architecture, operating limits, package information, sourcing guidance, and design considerations needed to evaluate the ICS570AIT. It also distinguishes verified drop-in alternatives from related clock devices that require different voltage, pinout, output-count, or circuit arrangements.
חלופות תחליף ישיר עבור ICS570AIT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותICS570AIT מפרטים
| תדר שעון מקסימלי | 170 MHz |
| Device Type | PLL-based zero-delay buffer and fanout clock distributor |
| Architecture | Proprietary analog/digital phase-locked-loop technique |
| Output Technology | CMOS |
| Output Count | 4 outputs |
| Inverted Output Count | 0 outputs |
| Recommended Supply Voltage for A Version | 5 V |
| Clock Features | Zero-delay buffering, fanout distribution, and spread-spectrum clock generation |
| מארז | 8-pin SOIC, 3.90 mm body width |
| Package Lead Pitch | 0.154 inch (3.90 mm) |
| סוג הרכבה | Surface-mount |
מדריך תצורת פינים של ICS570AIT 0.154 inch (3.90 mm)
תצורת פינים עבור ICS570AIT (מארזת 0.154 inch (3.90 mm)). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ICS570AIT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ICS570AIT מתאים עבור 6 יישוםs: Processor Clock Fanout, Memory Interface Clock Distribution, Communications Equipment Clock Tree, EMI-Sensitive Digital Systems, Embedded Control Clock Fanout, Industrial Control Module Clocking.
Processor Clock Fanout
The ICS570AIT fits processor clock-distribution designs that need up to four related CMOS clock outputs from one reference signal. Its PLL-based zero-delay-buffer architecture compensates for internal propagation delay, while the 170 MHz maximum operating frequency provides ample range for many digital processor and controller clock trees. The device is placed between the system oscillator or oscillator buffer and the clock receivers, with short output routes to minimize board-level skew. Its spread-spectrum capability can also reduce narrowband EMI concentration. The principal design check is that the A-version is intended for 5 V operation and that all downstream inputs tolerate the resulting CMOS levels.
מומלץ
Memory Interface Clock Distribution
The ICS570AIT is useful when a memory subsystem requires multiple clock destinations derived from one low-skew source. Four non-inverted CMOS outputs allow separate routing to memory devices or interface blocks, and the zero-delay-buffer function compensates for the IC's internal propagation delay. At frequencies up to 170 MHz, the architecture supports demanding digital clock trees, but the engineer must confirm receiver thresholds, load capacitance, and timing margins on the assembled PCB. Short, impedance-controlled routes and a continuous reference plane are important because package and trace delay can exceed the nominal device compensation.
מומלץ
Communications Equipment Clock Tree
The ICS570AIT can provide clock fanout in communications equipment where several digital subsystems need closely related timing signals. One reference clock is distributed through four CMOS outputs, reducing the number of separate buffering stages and helping maintain consistent phase relationships across the design. The device operates up to 170 MHz and supports spread-spectrum clock generation, which can reduce narrowband EMI in equipment that must meet emission constraints. Deployment should be based on the 5 V A-version supply recommendation, with output loading and receiver bandwidth checked against the manufacturer electrical tables.
מומלץ
EMI-Sensitive Digital Systems
Spread-spectrum operation makes the ICS570AIT relevant to digital systems in which a fixed-frequency reference could create a concentrated EMI peak. The device distributes the clock to four CMOS outputs while modulating the spectrum to reduce energy at one narrow frequency. It can therefore serve clock trees in industrial controllers, communications modules, and embedded platforms that require deterministic fanout plus improved emissions behavior. The allowable modulation range and any timing effect must be taken from the manufacturer datasheet. Board-level testing remains necessary because cable, connector, and enclosure resonances can influence the final radiated or conducted emissions result.
מומלץ
Embedded Control Clock Fanout
The ICS570AIT can expand a single oscillator reference into four clock destinations for embedded controllers, serial transceivers, and supporting digital logic. Its zero-delay-buffer function is valuable where several branches must retain predictable relationships, while the 8-pin SOIC package supports compact implementation. The 170 MHz frequency capability accommodates many control, networking, and peripheral clock requirements. Designers should use the official pin diagram, provide a stable reference-clock slew rate, and keep each output route short enough to meet the timing requirements of its receiver.
מומלץ
Industrial Control Module Clocking
The ICS570AIT is suitable for clock distribution inside industrial control modules that combine processors, memory, communication interfaces, and mixed-signal peripherals. Four CMOS outputs allow one reference to feed several timing domains, while spread-spectrum operation can assist with EMI control in compact equipment. The 5 V A-version supply recommendation fits systems with a compatible 5 V power architecture, but every connected receiver must be checked for valid input levels. Place the buffer near the clock-source branch point and keep sensitive routes away from switching power stages to preserve predictable timing.
מומלץ
נתוני עזר הנדסיים עבור ICS570AIT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 8-pin SOIC, 3.90 mm width |
| Brand | Renesas Electronics |
| Device Function | PLL-based zero-delay buffer and fanout distributor |
| Maximum Clock Frequency | 170 MHz |
| Output Count | 4 non-inverted CMOS outputs |
| Recommended Supply | 5 V for A-version |
| Clock Features | Zero-delay buffering, fanout distribution, spread-spectrum clock generation |
| Architecture | Proprietary analog/digital phase-locked-loop technique |
| Lead Pitch | 0.154 inch (3.90 mm) |
מבדילים עיקריים
- Combines four-output fanout with zero-delay buffering (לעומת570AILFT)
- Designed for 5 V systems (לעומתICS570 B-version)
- Includes spread-spectrum clock generation (לעומת570AILFT)
הערות תכנון
Use the manufacturer's 8-pin SOIC land pattern and confirm pin-1 orientation against the PCB footprint before fabrication. Place the ICS570AIT near the reference-clock source and the loads it serves, and route each clock output directly to its destination where possible. A continuous ground plane beneath the package provides a stable return path and helps limit crosstalk between the four clock outputs.
Treat zero delay as compensation for internal propagation, not as permission for unlimited trace length. Validate timing at the receiver pins with the intended load, PCB stack-up, and clock slope. Keep output traces short, avoid splitting a clock into multiple unmodeled branches, and use the reference termination guidance in the manufacturer application circuit when the board requires controlled impedance.
Use spread-spectrum operation when reducing narrowband clock emissions is beneficial, but verify the approved modulation range and clock-jitter implications in the manufacturer datasheet. Place the device and its reference clock away from high-current switching nodes and keep the ground return path short. Final EMI performance must be measured because enclosure, cable, connector, and board resonances can dominate the result.
Do not treat the 3.3 V B-version as an automatic substitute for the 5 V A-version. Confirm input thresholds, output levels, timing limits, and supply tolerances before using any related 570 device. Also verify the reference-clock slew rate and output loading, because a nominal zero-delay buffer cannot compensate for an unsuitable source waveform or an overloaded output.
מידע על תאימות
No definitive compliance declaration for the exact ICS570AIT ordering code appears in the retrieved technical summaries. Confirm the current material and environmental declarations with the manufacturer before using the component in a regulated production program.