Texas Instruments

INA129SHKQ - ±18V Precision Instrumentation Amplifier | TI

MPN: INA129SHKQ ✓ פעיל
±18 V Vdss 50 nA typical Id 8-pin ceramic SOIC, 0.220-inch body width Package
כמות הזמנה מינימלית: 1 |

INA129SHKQ סקירה

The Texas Instruments INA129SHKQ is a precision, low-power instrumentation amplifier with a gain of 10 V/V, a 1.3 MHz gain-bandwidth product, and a 4 V/µs slew rate, packaged in an 8-pin ceramic SOIC. It operates from a wide ±18 V supply and provides a military temperature range of -55°C to 210°C for precision signal-chain applications requiring elevated-temperature operation.

An instrumentation amplifier is a specialized differential-input amplifier optimized for measuring small signals superimposed on large common-mode voltages. Its internal gain-setting architecture, high input impedance, and common-mode rejection distinguish it from general-purpose operational amplifiers. The INA129 belongs to the instrumentation-amplifier hierarchy within signal-chain ICs and analog measurement systems, where it converts low-level sensor outputs into a robust differential signal suitable for analog-to-digital conversion.

Key characteristics include 25 µV typical offset voltage, 50 nA typical input bias current, and 95 dB typical common-mode rejection. The gain equation is compatible with the AD620, with a single external resistor setting gain from 1 to 10000. Input protection extends to ±40 V, while the wide ±18 V supply range supports industrial, military, and high-voltage measurement systems. A low 2 mA typical quiescent current also limits power consumption in portable or distributed instrumentation.

Internally, the INA129 combines a precision input stage, difference amplifier, gain-setting network, and laser-trimmed offset compensation. Its common-mode rejection of 93 dB at gains of 100 or higher helps suppress supply noise and unwanted common-mode signals. The 1.3 MHz bandwidth supports moderately fast measurements while the 4 V/µs slew rate preserves large-signal response through the output stage.

Typical uses include bridge-transducer amplification, current-shunt measurement, precision pressure sensing, ECG instrumentation, and high-voltage sensor interfaces. The ceramic SOIC package supports controlled thermal and environmental performance where an extended -55°C to 210°C operating range is required. Applications requiring only industrial-temperature grades should evaluate lower-cost standard-package variants before releasing a production design.

PCB design should use short differential input traces, solid grounding around the gain resistor, and decoupling close to the supply pins. Input filtering must preserve the sensor bandwidth while limiting high-frequency noise. Because the INA129SHKQ is a high-temperature military-grade option, designers should verify thermal margins, solder assembly constraints, sourcing requirements, and all operating conditions against the Texas Instruments INA129-HT documentation.

This product overview combines the device function, electrical limits, environmental ratings, replacement considerations, and application-level guidance into a practical engineering reference for instrumentation-amplifier design.

חלופות תחליף ישיר עבור INA129SHKQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם INA129SHKQ (אותו גורם צורה וטביעת רגל) — שונים ב Input Bias Current, Mounting Type, Operating Temperature Range, Package.

Texas Instruments
Input Bias Current: 5 nA maximum
Mounting Type: Surface mount
Operating Temperature Range: -40 °C to +125 °C
השווה עם INA129SHKQ →

INA129UA

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 8-pin SOIC
Precision instrumentation amplifier · 1 circuit · 50 µV maximum · 0.5 µV/°C maximum · 5 nA maximum · 120 dB minimum · ±40 V · ±18 V maximum

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

INA128SHKQ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-pin ceramic SOIC
Gain range differs by 0, but the external gain equation differs from the AD620-compatible equation used by INA129SHKQ.

📋 חלופה להתייחסות (לא בקטלוג)

INA129SHKQ דירוגים מרביים ומאפיינים חשמליים

Product Type Precision, low-power instrumentation amplifier
Number of Channels 1 channel
Closed-Loop Gain 10 V/V
Programmable Gain Range 1 to 10000 V/V
Gain-Bandwidth Product 1.3 MHz
Slew Rate 4 V/µs
מתח אספקה ±18 V
טווח טמפרטורת פעולה -55°C to 210°C
Offset Voltage 25 µV typical
Input Bias Current 50 nA typical
Common-Mode Rejection 95 dB typical
Common-Mode Rejection at Gain ≥100 93 dB
Input Protection Range ±40 V
זרם מנוחה 2 mA typical
מארז 8-pin ceramic SOIC, 0.220-inch body width
Terminal Count 8 terminals
סוג הרכבה Gull-wing surface mount
Temperature Grade Military high-temperature grade
Gain Equation Compatibility Compatible with AD620 gain equation

מדריך תצורת פינים של INA129SHKQ 8-pin ceramic soic, 0.220-inch body width

תצורת פינים עבור INA129SHKQ (מארזת 8-pin ceramic soic, 0.220-inch body width). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin ceramic soic, 0.220-inch body width עבור INA129SHKQ

אין נתוני פריסת פינים מפורטים עבור INA129SHKQ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

INA129SHKQ מתאים עבור 6 יישוםs: Bridge Transducer Amplification, High-Side Current-Shunt Measurement, Precision Pressure Sensor Interface, High-Temperature Process Measurement, Medical and Biopotential Front End, Aerospace Sensor and Telemetry Interface.

🏭

Bridge Transducer Amplification

The INA129SHKQ suits Wheatstone bridge sensing because its 95 dB typical common-mode rejection reduces the influence of large common-mode excitation while the 25 µV typical offset preserves small differential outputs. A single resistor establishes the programmed gain, and the AD620-compatible equation simplifies gain calculation. Designers should balance the two input paths, place the gain resistor close to the device, and verify output swing across the bridge range. The -55°C to 210°C rating is valuable where the bridge or transmitter operates in a high-temperature industrial or aerospace environment.

⚡

High-Side Current-Shunt Measurement

For current-shunt monitoring, the INA129SHKQ amplifies a small differential voltage while rejecting voltage common to both shunt terminals. Its 50 nA typical input bias current limits the error introduced by high-impedance sensor wiring, while the ±40 V protected-input range adds tolerance for transients. The 4 V/µs slew rate permits response to faster current changes than the 1.3 MHz gain-bandwidth product alone would suggest. Layout must minimize differential-loop area and keep return-current paths away from the input traces.

🖥️

Precision Pressure Sensor Interface

The INA129SHKQ can condition a low-level differential pressure-sensor output before an external ADC. Its 10 V/V closed-loop gain amplifies millivolt-scale signals, while 95 dB typical common-mode rejection helps isolate the measurement from sensor excitation noise and ground offsets. The 25 µV typical offset is meaningful relative to small bridge outputs, and the 2 mA typical quiescent current supports power-conscious instrumentation. Engineers should calculate the actual closed-loop bandwidth at the selected gain and include anti-alias filtering ahead of the converter.

🏭

High-Temperature Process Measurement

The INA129SHKQ is appropriate for process-control channels that operate from -55°C to 210°C because that extended range is a defining feature of the ordering option. The 1.3 MHz gain-bandwidth product supports sensor signals from moderately fast processes, while the ceramic-SOIC package matches high-reliability assembly requirements. At elevated temperature, verify offset behavior, input bias current, resistor drift, and thermal gradients across the board. Gain-setting components should use suitable temperature coefficients so they do not negate the amplifier's low offset.

💊

Medical and Biopotential Front End

The INA129SHKQ can serve as the differential input stage of a biopotential or diagnostic-signal amplifier when the system operates across the device's extended temperature range. The instrumentation-amplifier architecture provides high input impedance and 95 dB typical common-mode rejection, helping reject mains-coupled common-mode interference before further gain stages. Its 4 V/µs slew rate supports higher-frequency physiological waveforms within the 1.3 MHz bandwidth limit. Patient-safety, isolation, dielectric requirements, and applicable medical standards must be evaluated separately from electrical performance.

✈️

Aerospace Sensor and Telemetry Interface

The INA129SHKQ suits aerospace sensor interfaces where extended-temperature operation and a protected differential input are valuable. Its 95 dB typical common-mode rejection improves signal integrity when the sensor returns share ground with switching or high-energy systems, and the 25 µV typical offset supports precision telemetry channels. The 50 nA typical input bias current minimizes sensor-loading error. System integrators should still verify vibration packaging, solder-joint reliability, radiation requirements, and qualification documentation separately from the device's electrical ratings.

What is the INA129SHKQ?
The INA129SHKQ is a single-channel, precision, low-power instrumentation amplifier from Texas Instruments. According to the Texas Instruments INA129-HT datasheet, it provides a 10 V/V closed-loop gain, 1.3 MHz gain-bandwidth product, 4 V/µs slew rate, and operation from -55°C to 210°C in an 8-pin ceramic SOIC package. It is intended for differential sensor measurements where high common-mode rejection and input protection are important.
What is the operating voltage of INA129SHKQ?
The INA129SHKQ operates from a wide ±18 V supply. The Texas Instruments INA129-HT datasheet also identifies protected inputs extending to ±40 V, allowing the amplifier to tolerate transient or fault voltage at its input nodes. The ±18 V rating refers to the power-supply range, whereas the ±40 V figure describes input protection. External current limiting or series resistance may still be required when the signal source can exceed that protection range.
Where to buy INA129SHKQ online?
Use the Request a Quote form on this XAIPART page to request INA129SHKQ availability, order quantities, and current commercial terms. The part is a military high-temperature ceramic-SOIC instrumentation amplifier, so assembly configuration, screened grade, tube packaging, and procurement documentation can affect fulfillment. Submit the required quantity, target date, and delivery location with the request so the exact INA129SHKQ configuration can be quoted.
What is the price of INA129SHKQ?
The current price of INA129SHKQ is not stated in this page because commercial pricing changes with quantity and order conditions. Use the Request a Quote form on this XAIPART page for a current unit and volume quote. For engineering comparison, the device is a precision instrumentation amplifier with a 10 V/V closed-loop gain, 1.3 MHz bandwidth, and -55°C to 210°C operating range rather than a general-purpose operational amplifier.
What is the lead time for INA129SHKQ?
The current lead time for INA129SHKQ must be confirmed for the requested quantity through the Request a Quote form on this page. Availability can vary with ceramic-SOIC assembly, screening, and tube-packaging requirements. Engineers should include the required delivery date and certification documents in the request. The product is listed with a -55°C to 210°C military temperature range, so assembly traceability may also be needed for the intended program.
Is INA129SHKQ in stock?
Current INA129SHKQ stock is confirmed through the Request a Quote form on this page rather than through a static stock statement. Submit the required quantity, packaging preference, and shipment destination, and the supplier will respond with availability for the exact ordering code. Because INA129SHKQ uses an 8-pin ceramic SOIC package and a military temperature grade, users should specify whether tube packaging or screened assembly is required.
How do I set the gain of INA129SHKQ?
A single external resistor sets the INA129SHKQ gain from 1 to 10000 V/V. According to the Texas Instruments INA129-HT product information, its gain equation is compatible with the AD620, which simplifies resistor selection when moving between compatible instrumentation-amplifier designs. The stated closed-loop gain of the INA129SHKQ ordering option is 10 V/V, and its 1.3 MHz gain-bandwidth product must be considered when choosing a higher external gain.
What is the pinout of INA129SHKQ?
The INA129SHKQ uses an 8-pin ceramic SOIC footprint, but the complete numbered pin-description table is not reproduced on this page. Use the package drawing and pin-description table in the Texas Instruments INA129-HT datasheet before assigning PCB tracks. Pay particular attention to supply pins, input terminals, reference input, feedback resistor, and output because incorrect placement of the gain resistor or reference connection can invalidate the selected gain or create an unsafe bias condition.
Where to download the INA129SHKQ datasheet PDF?
The official INA129SHKQ documentation begins on the Texas Instruments INA129-HT product-details page at https://www.ti.com/product/INA129-HT/part-details/INA129SHKQ. From that page, open the device data sheet for the complete electrical characteristics, pin configuration, gain equations, typical performance curves, and recommended application circuit. Engineers should use the manufacturer document rather than a distributor summary when defining the PCB footprint, derating limits, or production test limits.
INA129SHKQ vs INA129UA - which is better for high-temperature use?
The INA129SHKQ is the better choice when the design requires the stated -55°C to 210°C operating range and a ceramic-SOIC assembly. INA129UA belongs to the same INA129 instrumentation-amplifier family and uses a compatible 8-pin SOIC footprint, but its temperature grade must be confirmed against the application requirement. Choose INA129SHKQ when the high-temperature rating, environmental reliability, and military-grade assembly outweigh the considerations associated with a standard commercial package.
What is the difference between INA129SHKQ and INA128SHKQ?
Both devices are precision instrumentation amplifiers in the TI INA12x family, but their external gain equations differ. The INA129 family uses an AD620-compatible gain equation, whereas INA128 follows the industry-standard INA128 equation. The INA129SHKQ is specified for a 10 V/V closed-loop gain, 1.3 MHz bandwidth, and 4 V/µs slew rate. Verify the required gain resistor value and confirm all pin functions in the device datasheet before treating either device as a replacement.
When should I choose INA129SHKQ over a standard INA129 variant?
Choose INA129SHKQ when the operating environment can reach -55°C to 210°C or the design requires its high-temperature ceramic-SOIC assembly. A standard INA129 variant is appropriate when its documented temperature range comfortably covers the application and lower assembly cost is more important. In either case, evaluate input bias current, offset voltage, common-mode rejection at the selected gain, output swing, supply noise, and the sensor source impedance before fixing the design.
Is INA129SHKQ suitable for bridge and current-shunt measurements?
The INA129SHKQ is suitable for differential bridge and current-shunt measurements because its 95 dB typical common-mode rejection suppresses common-mode noise, and its inputs are protected to ±40 V. The 25 µV typical offset and 50 nA typical input bias current support precision measurements of low-level signals. The external gain resistor should be placed close to the device, and source resistance on both inputs should be balanced to preserve common-mode performance.
What can replace INA129SHKQ?
The closest same-family choice is a standard INA129 8-pin SOIC ordering variant when the required temperature grade remains satisfied; however, it is not an automatic high-temperature replacement. INA128-family parts require recalculation of the gain resistor because the gain equations differ. Cross-brand substitutions must also be checked for pin functions, supply range, input protection, bandwidth, offset, bias current, common-mode rejection, package dimensions, and qualification requirements before approval.
Is there an AD620-compatible drop-in alternative for INA129SHKQ?
The INA129SHKQ gain equation is explicitly compatible with the AD620, which makes AD620-family devices relevant candidates when the package and electrical requirements also match. Compatibility of the resistor equation alone does not prove a drop-in replacement for the high-temperature ceramic-SOIC INA129SHKQ. Confirm pin assignments, temperature rating, supply limits, gain accuracy, offset, bandwidth, input protection, package dimensions, and procurement qualification using each candidate's manufacturer documentation.
What are the key specifications of INA129SHKQ that engineers should know?
The INA129SHKQ combines a 10 V/V closed-loop gain with a 1.3 MHz gain-bandwidth product and 4 V/µs slew rate. It accepts ±18 V supplies, provides 95 dB typical common-mode rejection, 25 µV typical offset voltage, 50 nA typical input bias current, 2 mA typical quiescent current, and protected inputs to ±40 V. Its defining environmental feature is the -55°C to 210°C operating range in an 8-pin ceramic SOIC package.

נתוני עזר הנדסיים עבור INA129SHKQ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose INA129SHKQ when the measurement system requires a differential instrumentation amplifier with a 10 V/V closed-loop gain, 1.3 MHz gain-bandwidth product, 4 V/µs slew rate, protected inputs, and an extended -55°C to 210°C operating range. Its ceramic-SOIC construction is particularly relevant to high-temperature and controlled-reliability programs. INA129UA is the more practical same-family choice when its temperature rating covers the application and a standard SOIC package is acceptable. INA128SHKQ retains the high-temperature package concept but uses a different gain equation, so the external resistor must be recalculated and every function checked. No cross-brand part should be approved solely because its gain equation resembles AD620; package dimensions, temperature grade, pin functions, bandwidth, offset, bias current, protection, and qualification requirements must all match the target design.

השוואה עם חלופות

פרמטר מוצר זה INA129UA INA128SHKQ
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin ceramic SOIC 8-pin SOIC 8-pin ceramic SOIC
Product Type Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier
Gain Equation AD620-compatible AD620-compatible INA128 industry-standard equation

מבדילים עיקריים

  • Extended high-temperature operating range (לעומתINA129UA)
  • AD620-compatible gain calculation (לעומתINA128SHKQ)
  • Precision input-stage characteristics (לעומתINA129UA)

הערות תכנון

Route the two input signals as a close-coupled differential pair and keep the INA129SHKQ gain resistor close to its package pins. Place input filtering symmetrically to avoid converting common-mode noise into differential error. Connect a solid ground reference beneath the device and keep switching-converter and digital return currents away from the input and feedback nodes.

Do not assume that an AD620-compatible gain equation makes every INA12x device interchangeable. INA128 and INA129 use different external resistor equations, so changing family requires recalculating the gain-setting resistor. Also verify the reference-pin voltage, output-swing limits, supply polarity, and all pin names in the device pin-description table before fabrication.

Use the -55°C to 210°C rating as an environmental operating limit, not a thermal design target. At the upper temperature extreme, check offset drift, bias-current behavior, resistor tolerances and temperature coefficients, and board gradients. The 2 mA typical quiescent current is generally modest, but nearby regulators and high-impedance source nodes still require normal thermal and layout analysis.

Calculate the usable closed-loop bandwidth at the programmed gain rather than treating the 1.3 MHz gain-bandwidth product as a constant signal bandwidth. At a gain of 10, the approximate gain-bandwidth relationship indicates substantially less bandwidth than the amplifier's small-signal gain-bandwidth product. Place anti-alias filters before the amplifier where excessive bandwidth could increase noise or move the signal toward the ADC sampling spectrum.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The INA129SHKQ is identified as a military high-temperature instrumentation amplifier. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or project-specific procurement records.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

INA129SHKQ datasheet INA129SHKQ pinout INA129SHKQ datasheet pdf Texas Instruments INA129SHKQ INA129SHKQ specifications INA129SHKQ ceramic SOIC INA129SHKQ replacement INA129SHKQ equivalent INA129SHKQ vs INA129UA INA129SHKQ vs INA128SHKQ INA129SHKQ bridge amplifier INA129SHKQ current shunt INA129SHKQ price INA129SHKQ stock what is INA129SHKQ

רכיבים ומונחים קשורים

Texas Instruments INA129SHKQ INA129UA INA128SHKQ INA129 INA128 AD620 precision instrumentation amplifier differential amplifier analog measurement IC semiconductor closed-loop gain gain-bandwidth product common-mode rejection ratio input bias current offset voltage slew rate quiescent current protected input 8-pin ceramic SOIC SOIC family surface-mount package bridge transducer current-shunt measurement military high-temperature grade
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר