Harris Corporation

ISL83385CA - Single RS-232 Transceiver | Harris Corporation

MPN: ISL83385CA ✗ סוף ייצור
כמות הזמנה מינימלית: 1 |

ISL83385CA סקירה

The Harris Corporation ISL83385CA is a single-channel RS-232 transmitter/receiver interface IC intended for serial communication links that require one driver and one receiver in the same package. The component is listed as a UART IC channel and an RS-232 transmitter/receiver, placing it within the interface-IC hierarchy as a signal-conditioning device between a digital UART or controller and an RS-232 physical connection. Its key role is to translate digital logic levels into RS-232-compatible levels in one direction and convert incoming RS-232 signals back to logic levels in the other direction.

The ISL83385CA is associated with the 20-SSOP package family according to closely related manufacturer listing data for ISL83385ECA. The package is a surface-mount SOIC-family implementation with leads on two opposing sides, making it practical for compact industrial, communications, and embedded-control equipment. Exact pin assignments, electrical limits, and charge-pump details should be confirmed in the manufacturer datasheet before a new layout is released.

An RS-232 transceiver combines functions that are normally separated in older interface designs. The transmitter converts CMOS/TTL-level inputs into the bipolar voltage range used by RS-232, while the receiver provides noise-tolerant logic-level output. Combining both directions in one IC reduces board area and component count, but it does not eliminate the need for correct interface protection, grounding, cable routing, and logic-level compatibility checks.

The most relevant application areas are point-to-point serial links, industrial control panels, test equipment, data acquisition systems, and embedded systems that communicate with legacy RS-232 peripherals. A designer should pay particular attention to the number of data and control lines, the available package footprint, the required logic thresholds, and the maximum data rate. Because the target package and pin functions are not fully stated in the available manufacturer listing text, the footprint and signal assignments should be checked against the official ISL83385CA documentation.

This page combines the target part identity with a practical RS-232 design perspective, including selection criteria, interface considerations, and a comparison framework for evaluating compatible RS-232 transceiver options. The specific electrical ratings and lifecycle details should be confirmed against the current Harris Corporation product documentation before procurement or PCB release.

חלופות תחליף ישיר עבור ISL83385CA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

ISL83385CA מפרטים

Product Type RS-232 transmitter/receiver interface IC
Channel Count 1 channel
Directional Capability Bidirectional transmitter and receiver
Interface Category RS-232
Logic Interface CMOS/TTL-level digital signaling
סוג הרכבה Surface mount
סטטוס RoHS unknown
REACH Status unknown
Automotive Qualification unknown

מדריך תצורת פינים של ISL83385CA standard

תצורת פינים עבור ISL83385CA (מארזת standard). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת standard עבור ISL83385CA

אין נתוני פריסת פינים מפורטים עבור ISL83385CA.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ISL83385CA מתאים עבור 6 יישוםs: Industrial Controller RS-232 Port, Test and Measurement Console, Data Acquisition Interface, Service and Configuration Port, Communications Equipment, Embedded Control Systems.

🏭

Industrial Controller RS-232 Port

The ISL83385CA fits a point-to-point industrial controller that must communicate with a legacy RS-232 peripheral. Combining one transmitter and one receiver in a single interface IC reduces the number of discrete interface components and simplifies firmware ownership of the UART connection. The design should confirm the device's supply voltage, maximum data rate, logic thresholds, and exact package footprint against the controller requirements. RS-232 is not a balanced differential standard, so grounding, cable routing, connector selection, and transient protection remain important even when the signal path is short. Use the manufacturer datasheet to assign every transceiver pin and to determine whether charge-pump capacitors or other external components are required.

🔧

Test and Measurement Console

The ISL83385CA can provide a compact RS-232 link between a test instrument or service console and a host controller. Its single bidirectional channel suits equipment that exchanges commands and measurements through one serial port without needing multiple independently selectable receivers. Designers should verify the supported data rate before selecting it for automated laboratory control, then account for the connector's unbalanced signaling and susceptibility to industrial noise. A firm ground reference, short organized cable, and appropriate protection network improve reliability. The exact pin arrangement and external capacitor requirements should follow the manufacturer documentation rather than a generic RS-232 reference design.

📊

Data Acquisition Interface

The ISL83385CA is suitable for a data-acquisition unit that must translate a controller UART into an RS-232 connection for an external instrument or legacy data source. Integrating the driver and receiver in one IC reduces board area and avoids coordinating separate enable controls. The implementation must preserve signal levels expected by both sides of the interface, observe the device's maximum data rate, and confirm its operating-temperature range for the measurement environment. Because RS-232 uses a single-ended signal referenced to ground, a common ground and controlled cable route are required. Review the exact pin and package information in the manufacturer datasheet before laying out the acquisition board.

🖥️

Service and Configuration Port

The ISL83385CA fits embedded equipment that exposes a service port for configuration, firmware loading, or diagnostic commands. One transmitter and one receiver provide the required bidirectional command path while keeping the interface compact. Firmware should define a robust framing and timeout protocol because the physical RS-232 link alone provides no handshaking or error recovery. Hardware designers should use the exact ordering-code pinout, provide the specified bypass and charge-pump components, and add connector-side protection where cables can be exposed to user contact. The part is a strong fit when a legacy host computer is the intended counterpart.

🌐

Communications Equipment

The ISL83385CA can be used in communications equipment that bridges a modern UART controller to a single RS-232 port. This arrangement is common in legacy network-management equipment, terminal adapters, and diagnostic modules where the RS-232 endpoint remains established but board area is constrained. The integration saves the footprint of separate transmit and receive interface devices, provided the package and pinout are verified correctly. Engineers should examine receiver noise margin, transmitter slew behavior, grounding, and any requirement for an external modem-control or hardware-handshake path. A multi-channel transceiver should be selected instead when several ports or switchable routes are required.

🔧

Embedded Control Systems

The ISL83385CA provides a practical RS-232 interface for embedded control systems that must connect a microcontroller or programmable controller to legacy equipment. Its integrated driver and receiver simplify the hardware boundary between the controller and the RS-232 connector, while the one-channel topology avoids unnecessary multiplexing. Firmware must still implement the UART protocol and line-level timing expected by the connected device. Layout should keep high-level switching and connector transients away from sensitive control circuitry, and the system must confirm the package pin count and land pattern before release. Use the manufacturer documentation to validate supply, bypass, capacitor, and temperature requirements.

What is the ISL83385CA used for?
The ISL83385CA is a single-channel RS-232 transmitter/receiver interface IC for bidirectional serial communication. It combines one RS-232 line driver and one receiver in one package, allowing a UART controller to connect to a legacy RS-232 peripheral. The manufacturer listing identifies the device as an RS-232 transmitter/receiver, while the distributor categorization identifies it as a UART IC channel. Its exact logic thresholds, supply limits, and timing ratings should be confirmed in the manufacturer datasheet.
How many RS-232 channels does ISL83385CA provide?
The ISL83385CA provides one UART communication channel with both transmit and receive functions. A single-channel device is generally used where one point-to-point RS-232 port is sufficient, such as connecting a controller to a peripheral, service console, or test instrument. The available distributor listing identifies the part as a UART IC channel and as an RS-232 transmitter/receiver. Confirm the complete channel and pin configuration in the manufacturer pin-description table before assigning PCB signals.
Where can I download the ISL83385CA datasheet PDF?
The ISL83385CA datasheet should be obtained from the current Harris Corporation or Renesas Electronics product documentation because the legacy Intersil part remains associated with that product family. The verified manufacturer cross-reference page is available at https://www.renesas.com/en/support/cross-reference, while the target listing is available at https://www.digikey.com/en/products/detail/rochester-electronics-llc/ISL83385CA/12605802. Search the exact ISL83385CA ordering code when requesting documentation so that the package, grade, and pinout match the assembled board.
Where can I find the ISL83385CA pinout?
The ISL83385CA pinout should be located in the pin-description table of the manufacturer datasheet for the exact package suffix. The verified distributor record confirms the target MPN but does not expose the complete numbered pin list, so assigning pins from a generic RS-232 diagram would be unsafe. Use the manufacturer document to identify the supply pins, receiver input, transmitter output, ground connections, enable functions, and any charge-pump capacitor terminals.
Is ISL83385CA suitable for industrial serial communication?
The ISL83385CA can suit industrial serial communication when the design stays within its specified supply voltage, temperature range, data rate, and RS-232 reach. Because it combines a transmitter and receiver in one IC, it can simplify a point-to-point industrial control or service interface while reducing board area. Industrial suitability must still be assessed against transient immunity, grounding, cable length, connector selection, and the operating-temperature ratings listed in the manufacturer datasheet.
Can ISL83385CA replace a discrete RS-232 transmitter and receiver?
The ISL83385CA can replace separate RS-232 transmitter and receiver ICs when the original design used one driver and one receiver and the replacement matches the same package, pinout, supply voltage, and logic levels. Pin compatibility must be checked at the individual pin level because package similarity alone does not establish interchangeability. Verify the exact footprint, exposed or non-exposed pad arrangement, charge-pump capacitor connections, and shutdown behavior in the manufacturer documentation before substitution.
Is ISL83385CA the same as ISL83385ECA?
ISL83385CA and ISL83385ECA are closely related Harris Corporation RS-232 transceiver order codes, but they should not be treated as identical without checking the suffix-specific package and pin information. The verified ISL83385ECA listing specifies a 20-SSOP package, while the complete ISL83385CA package designation is not printed in the target listing text. Treat the two as a potential replacement only after comparing their manufacturer pin tables, electrical ratings, and land patterns.
What is the best drop-in replacement for ISL83385CA?
No drop-in replacement for ISL83385CA can be established from the available cross-reference results because they identify search tools but do not name a candidate with a verified identical package and pinout. The related ISL83385ECA part is a logical first comparison target because it is the same manufacturer family, but it is not listed as a drop-in alternative until its 20-SSOP package and pin mapping are confirmed against the target. Use the manufacturer cross-reference tool and compare the exact ordering codes before approving a replacement.
When should I choose ISL83385CA over a multi-channel RS-232 transceiver?
Choose ISL83385CA when the system needs only one bidirectional RS-232 connection and a single integrated transmitter/receiver is preferable to separate interface devices. A multi-channel transceiver becomes more appropriate when several ports must share a board or when software-selectable channel routing is required. The ISL83385CA should be selected only after confirming its single-channel architecture, package footprint, data rate, and operating limits against the system requirements.
What are the key specifications of ISL83385CA that engineers should know?
The central engineering facts are that ISL83385CA is a one-channel, bidirectional RS-232 transmitter/receiver interface IC from Harris Corporation. The target distributor listing categorizes it as a UART IC channel, while a related family listing identifies the family in a 20-SSOP package. Supply voltage, maximum data rate, logic thresholds, temperature range, exact target package, and complete pin assignments remain the critical release-review items and must be taken from the manufacturer datasheet.
How do I design the ISL83385CA RS-232 interface?
Design the ISL83385CA interface by assigning the UART or controller pins to the receiver and transmitter functions, connecting the required supply and ground pins, and following the manufacturer charge-pump capacitor recommendations where applicable. Keep the RS-232 connector side physically separated from sensitive digital circuitry, use the specified protection strategy, and maintain a common ground reference between connected equipment. Validate the final design against the datasheet pin table and interface timing requirements.
Does ISL83385CA need external charge-pump capacitors?
The ISL83385CA may require external charge-pump capacitors because many integrated RS-232 transceivers generate the bipolar transmitter voltage with an internal voltage doubler, but the exact requirement must be verified in the manufacturer datasheet. Do not infer capacitor values or connection order from generic RS-232 circuits. Confirm whether the capacitors are required, their voltage rating, tolerance, placement, and connection pins for the exact ISL83385CA suffix.
What is the price of ISL83385CA?
Current commercial availability and pricing for ISL83385CA should be requested through the Request a Quote form on this page. The verified LCSC result identifies the exact MPN as in stock, but its displayed amount is a starting reference rather than a qualifying quantity-break schedule, so it is retained only as last-known pricing information. The form is the appropriate route for current pricing, minimum order quantity, stock confirmation, and lead time.
Is ISL83385CA in stock and what is its lead time?
The verified LCSC listing describes ISL83385CA as in stock, but it does not provide a structured quantity-break schedule or a guaranteed lead time. Use the Request a Quote form on this page for current stock, minimum order quantity, and lead-time confirmation. Engineers should not treat a distributor landing-page availability statement as a production allocation guarantee, particularly for legacy interface components that may have constrained channel inventory.
Where can I buy ISL83385CA online?
Use the Request a Quote form on this page to inquire about ISL83385CA availability, current commercial terms, and order routing for the exact ordering code. The verified target listing is hosted by DigiKey under Rochester Electronics, but this page routes procurement through XAIPART so that package suffix, condition, quantity, and delivery requirements can be confirmed together. The request should specify the required quantity and target delivery schedule.
Is there a Renesas equivalent for ISL83385CA?
A Renesas Electronics equivalent may exist within the legacy Intersil ISL83385 family, but no specific cross-brand drop-in candidate is identified by the available cross-reference results. The same-family ISL83385ECA order code is the most relevant documented comparison point, yet the available listing does not prove that its package and pinout match ISL83385CA exactly. Use the Renesas Electronics cross-reference service at https://www.renesas.com/en/support/cross-reference and compare the exact suffix-specific datasheets before release.

נתוני עזר הנדסיים עבור ISL83385CA — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ISL83385CA for a compact point-to-point RS-232 interface that requires one transmitter and one receiver but does not need multiple switchable channels. Its integrated bidirectional structure can simplify board area and firmware ownership compared with separate driver and receiver ICs. Before selecting it, confirm the exact package footprint, pin assignment, supply voltage, logic thresholds, maximum data rate, temperature range, and external capacitor requirements in the manufacturer datasheet. Consider the related ISL83385ECA order code when reviewing legacy inventory, but do not treat it as a drop-in replacement until its package and pinout are proven equivalent to ISL83385CA. For systems requiring several ports, choose a multi-channel RS-232 transceiver instead. For new point-to-point products, also evaluate whether the required protocol still justifies an RS-232 physical interface.

הערות תכנון

Verify the exact ISL83385CA footprint against the suffix-specific manufacturer drawing before routing. The target listing does not expose a complete package designation, while a related ISL83385ECA listing identifies a 20-SSOP package. Confirm body width, lead pitch, lead span, and pin numbering rather than assuming that all family suffixes use the same land pattern. Place the required bypass and charge-pump components close to their associated pins using the shortest possible traces.

Do not approve a replacement based only on the ISL83385 family name or package family. Compare the exact supply pins, transmitter and receiver pins, charge-pump terminals, shutdown behavior, and exposed-pad requirements in each manufacturer datasheet. A device with the same body outline can still be non-pin-compatible if its pin numbering, thermal pad, or electrical limits differ. Record the approved alternate part number against the specific schematic and board revision.

Treat the RS-232 connector side as a potentially noisy single-ended interface. Route it away from clocks, sensor inputs, and sensitive analog traces; use a stable common ground between connected equipment; and place connector-side protection close to the entry point. Confirm the receiver's noise tolerance and the transmitter's supported slew behavior in the datasheet. Avoid long unprotected traces or unnecessary stubs between the transceiver and connector.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements appear in the verified target records. Confirm current compliance documentation with Harris Corporation or the authorized product-continuity organization.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ISL83385CA datasheet ISL83385CA datasheet pdf ISL83385CA pinout ISL83385CA specifications ISL83385CA RS-232 transceiver ISL83385CA equivalent ISL83385CA replacement ISL83385CA cross reference ISL83385CA vs ISL83385ECA ISL83385CA footprint ISL83385CA price ISL83385CA stock Harris Corporation ISL83385CA ISL83385CA schematic ISL83385CA application circuit

רכיבים ומונחים קשורים

Harris Corporation ISL83385CA ISL83385ECA Renesas Electronics Intersil RS-232 UART RS-232 transceiver line driver receiver interface IC mixed-signal IC semiconductor CMOS TTL charge-pump capacitor single-ended signaling surface mount SSOP SOIC package family industrial control data acquisition test equipment service port
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר