Renesas Electronics

ISL8483CPZ - 5V RS-485/RS-422 Transceiver | Renesas

MPN: ISL8483CPZ ✓ פעיל
5 V Vdss RS-485 and RS-422 Rds(on) 8-PDIP, 0.300 in (7.62 mm) width Package
כמות הזמנה מינימלית: 1 |

ISL8483CPZ סקירה

The Renesas Electronics ISL8483CPZ is a 5 V, low-power RS-485/RS-422 interface transceiver with one transmitter and one receiver in an 8-pin through-hole plastic DIP package. It supports balanced differential communications, with a listed operating temperature range of -40°C to +85°C and configurable high-speed or slew-rate-limited operation for communication links where signal integrity and control over edge rates are important.

An RS-485/RS-422 transceiver is a differential interface IC used to connect a host controller or programmable logic device to a balanced communication bus. The transceiver converts a logic-level signal into a differential bus signal and receives a differential bus signal into logic. It belongs to the interface IC hierarchy, which connects embedded controllers, sensors, industrial equipment, and communications infrastructure while electrically isolating the logic side from common-mode bus noise.

The principal feature of the ISL8483CPZ is its combination of one transmitter and one receiver in a compact 8-PDIP package. Its 5 V supply operation suits conventional embedded and industrial logic systems. The manufacturer describes the family as low power, with high-speed and slew-rate-limited operating choices intended for different bus lengths, endpoint arrangements, and electromagnetic-interference requirements.

Technically, the part operates as a balanced line-interface solution for RS-422 point-to-point links and multidrop RS-485 networks. The high-speed mode supports maximum communication throughput, while slew-rate limiting reduces the bandwidth of transition edges and can help control radiated emissions in longer or noisier installations. Designers must still verify termination, biasing, grounding, and common-mode limits against the complete bus topology.

Typical uses include industrial sensor networks, factory automation equipment, building-control nodes, remote telemetry links, and embedded measurement systems. The device is especially appropriate where a 5 V controller requires a wired differential connection but a surface-mount package is unnecessary. Its through-hole DIP format can simplify prototype assembly and inspection.

A critical design consideration is the bus network configuration. Use a termination resistor only where the signal topology requires it, and avoid placing excessive termination across every node. Maintain a common reference between communicating equipment, provide a suitable return path, and verify maximum cable length, node count, and driver loading before release.

This page combines the exact package, interface, voltage, temperature, and transceiver information with drop-in replacement analysis, comparison parameters, and practical bus-layout guidance. It is intended to help engineers evaluate the ISL8483CPZ against equivalent 8-PDIP interface choices before committing a PCB or production BOM.

חלופות תחליף ישיר עבור ISL8483CPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ISL8483CPZ (אותו גורם צורה וטביעת רגל) — שונים ב Mounting Type, Operating Temperature Range, Package, Product Type, Receiver Count.

Renesas Electronics
Mounting Type: Through-hole
Operating Temperature Range: 0 °C to 70 °C
Package: 8-pin PDIP
השווה עם ISL8483CPZ →

ISL8483IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-PDIP (0.300 in, 7.62 mm)
RS-485/RS-422 single transceiver · 1 transmitter · 1 receiver · 5 V · RS-422 and RS-485 · BiCMOS · 0 °C to 70 °C · 8-pin PDIP

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8483CPZ מפרטים

Product Type RS-485/RS-422 transceiver
מתח אספקה 5 V
Transmitter Count 1
Receiver Count 1
Supported Standards RS-485 and RS-422
טווח טמפרטורת פעולה -40°C to +85°C
מארז 8-PDIP, 0.300 in (7.62 mm) width
סוג הרכבה Through hole
Signal Mode Balanced differential
Operating Mode High speed or slew-rate limited
Power Class Low power

מדריך תצורת פינים של ISL8483CPZ 8-pdip, 0.300 in (7.62 mm) width

תצורת פינים עבור ISL8483CPZ (מארזת 8-pdip, 0.300 in (7.62 mm) width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 8-pdip, 0.300 in (7.62 mm) width עבור ISL8483CPZ

אין נתוני פריסת פינים מפורטים עבור ISL8483CPZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ISL8483CPZ מתאים עבור 6 יישוםs: Industrial Sensor Networks, Building Control Networks, Remote Telemetry Equipment, Factory Automation Controllers, Test and Measurement Systems, Embedded Equipment Communication.

🏭

Industrial Sensor Networks

The ISL8483CPZ fits 5 V industrial sensor nodes that connect remote sensors to a controller over a balanced RS-485 bus. Its one-transmitter, one-receiver arrangement provides a compact interface for a half-duplex multidrop network, while the -40°C to +85°C rating supports equipment operating across typical industrial temperature ranges. The differential bus helps reject common-mode noise present near motors, relays, and switching power supplies. Designers should control bus edge rates when emissions are critical and verify the longest cable, highest node count, and worst-case common-mode voltage before production release.

🏠

Building Control Networks

The ISL8483CPZ is suitable for building-control units that distribute commands and collect measurements across RS-485 wiring. A 5 V system can use the transceiver to connect a microcontroller to sensors, actuators, or remote I/O modules without converting the balanced bus to a single-ended logic signal. The 8-PDIP package simplifies through-hole assembly and prototype inspection, while the -40°C to +85°C range covers many equipment rooms and control cabinets. Confirm ground-reference strategy, cable length, protective grounding, and termination placement for the installed building topology.

🌐

Remote Telemetry Equipment

The ISL8483CPZ can connect a low-power telemetry controller to a field station over a balanced differential link. Its single transmitter and single receiver support half-duplex RS-485 communication, allowing a compact endpoint to exchange commands and measurement data with a central collector. The 5 V supply requirement aligns with many embedded control boards, and the low-power transceiver family supports space- and energy-conscious designs. At the system level, use a controlled bus topology, suitable cable routing, and verified surge protection for installations exposed to outdoor or industrial transients.

🤖

Factory Automation Controllers

The ISL8483CPZ fits factory automation controllers that must exchange reliable data with distributed drives, test stations, or operator panels. Differential signaling reduces susceptibility to the common-mode noise commonly present near industrial motors and power converters. The device operates from 5 V and includes one transmitter and one receiver in an 8-PDIP package, making it practical for through-hole control boards and prototypes. Engineers should choose high-speed or slew-rate-limited operation according to cable length and emissions requirements, while validating grounding, common-mode margin, termination, and node loading.

🔧

Test and Measurement Systems

The ISL8483CPZ can serve as the communication interface in distributed test and measurement equipment where a controller gathers readings from remote instrument modules. The balanced RS-485/RS-422 capability provides a robust wired connection over distances greater than typical single-ended links, while the 8-PDIP format simplifies assembly of laboratory controller boards. Select slew-rate-limited operation when lower transition rates improve signal integrity on longer cables. Validate the complete network with the intended instruments attached, including grounds, cable length, shielding strategy, and the maximum number of connected receivers.

📡

Embedded Equipment Communication

The ISL8483CPZ is appropriate for embedded equipment that exchanges data between a main controller and a peripheral instrument using RS-485. Its one-transmitter, one-receiver configuration avoids the space associated with a multi-channel interface, while the 5 V operating requirement supports conventional embedded logic. The 8-PDIP package is useful during development or in products assembled with through-hole processes. Confirm the driver-enable strategy to prevent bus contention and use a termination scheme matched to the physical topology rather than placing a resistor on every node.

What is the ISL8483CPZ?
The ISL8483CPZ is a Renesas Electronics 5 V, low-power differential transceiver containing one RS-485/RS-422 transmitter and one receiver in an 8-PDIP package. According to the manufacturer datasheet, the device supports both RS-485 and RS-422 balanced communication and offers high-speed or slew-rate-limited operation. The 8-PDIP package is 0.300 inches, or 7.62 mm, wide and uses through-hole mounting.
What are the key specifications of ISL8483CPZ that engineers should know?
The key ISL8483CPZ specifications are a 5 V supply, one transmitter, one receiver, RS-485/RS-422 operation, and a -40°C to +85°C operating range. The manufacturer datasheet identifies the device as a low-power, BiCMOS-family interface transceiver with selectable high-speed or slew-rate-limited behavior. The device is packaged in an 8-PDIP measuring 0.300 inches, or 7.62 mm, across.
Where can I download the ISL8483CPZ datasheet PDF?
The ISL8483CPZ datasheet PDF is available through Renesas Electronics and the linked manufacturer product documentation on this page. The datasheet is the controlling document for the pin-description table, electrical characteristics, recommended application circuit, and package drawings. Use it to verify signal names and connection details before assigning PCB tracks, especially for the enable, driver-enable, ground, and differential bus nodes.
Where can I find the ISL8483CPZ pinout?
The ISL8483CPZ pinout is shown in the pin-description table and package drawing in the manufacturer datasheet. The component uses an 8-PDIP package, so the drawing contains eight numbered positions. Use the table to identify the supply, ground, logic-side inputs and outputs, driver-enable control, and differential bus terminals instead of relying on visually similar RS-485 devices.
Where to buy ISL8483CPZ online?
Use the Request a Quote form on this page to request ISL8483CPZ availability, order quantities, and current commercial terms. The exact device is an 8-PDIP, one-transmitter and one-receiver RS-485/RS-422 transceiver from Renesas Electronics. The form allows engineers to specify quantity and packaging requirements without relying on a static price that may not reflect current supply.
What is the price of ISL8483CPZ?
Current pricing for the ISL8483CPZ should be requested through the Request a Quote form on this page. The part is the exact 8-PDIP Renesas device with one RS-485/RS-422 transmitter and one receiver. A quotation should reflect the requested quantity, tube packaging, delivery schedule, and any traceability or inspection requirements specified for the production build.
What is the lead time for ISL8483CPZ?
The current lead time for ISL8483CPZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and required tube packaging. For production planning, include the firmware and hardware qualification schedule as well as the component delivery window so an incoming inspection or line requalification does not become the schedule-limiting activity.
Is ISL8483CPZ in stock?
Request current ISL8483CPZ stock status through the Request a Quote form on this page. The exact ordering code is the 8-PDIP package rather than the surface-mount ISL8483IBZ or ISL8483EIBZ-T7A versions. State the required quantity and tube-packaging preference in the request so the returned supply information can be evaluated against the intended assembly process.
ISL8483CPZ vs ISL8483IPZ - which is better for a through-hole design?
Both ISL8483CPZ and ISL8483IPZ belong to the Renesas ISL8483 family, but a final selection requires checking the ordering table for package, temperature grade, and production-status differences. The ISL8483CPZ is confirmed as an 8-PDIP device with a -40°C to +85°C operating range. Verify the exact suffix and electrical limits in the manufacturer datasheet before treating either ordering code as a drop-in substitution.
What is the difference between ISL8483CPZ and ISL8483IBZ?
The principal confirmed difference is physical mounting: ISL8483CPZ is an 8-PDIP through-hole device, while ISL8483IBZ is an 8-SOIC surface-mount device. A surface-mount package cannot be installed on an existing 8-PDIP footprint without a PCB redesign or an adapter assembly. The package choice also changes assembly method, mechanical clearance, and thermal behavior even if the underlying transceiver functions are related.
When should I choose ISL8483CPZ over another RS-485 transceiver?
Choose the ISL8483CPZ when the design specifically uses a 5 V supply, one balanced transmitter and receiver, an 8-PDIP footprint, and an operating range extending to +85°C. It is particularly useful for prototypes and through-hole industrial boards where surface-mount assembly is unnecessary. For a high-volume surface-mount design, a package-matched surface-mount alternative is generally easier to assemble and inspect.
Is ISL8483CPZ suitable for industrial automation and sensor networks?
Yes, the ISL8483CPZ is suitable for many 5 V industrial automation, sensor-network, building-control, and telemetry interfaces when its differential bus limits meet the application. Its -40°C to +85°C range and selectable high-speed or slew-rate-limited behavior support demanding wired links. The complete system must still pass common-mode, surge, ESD, grounding, and cable-length verification.
What can replace ISL8483CPZ?
The closest same-family replacement to evaluate is the Renesas ISL8483IPZ, provided its ordering table confirms an 8-PDIP package, matching pin arrangement, and compatible electrical limits. The ISL8483IBZ and ISL8483EIBZ-T7A are surface-mount versions and are not direct replacements for a 2.54 mm-pitch through-hole footprint. Check driver enable behavior, temperature grade, bus loading, and propagation timing before production release.
What is the best Renesas equivalent for ISL8483CPZ?
The best same-manufacturer candidate is the Renesas ISL8483IPZ because it belongs to the ISL8483 transceiver family and may support the same 8-PDIP mechanical format. The available part information does not establish every electrical equality, so the manufacturer ordering table and datasheet must confirm pinout, temperature grade, propagation delay, and supply compatibility. A cross-brand substitute requires the same verification.
How do you design an RS-485 bus around ISL8483CPZ?
Design the ISL8483CPZ bus as a balanced differential network with an appropriate common reference, driver-enable control, and topology-specific termination. Avoid placing termination at every node, because parallel termination can over-damp the bus. Keep differential routing symmetrical, minimize stubs, control the transition rate when emissions are sensitive, and verify operation with the longest cable and maximum planned node count.

נתוני עזר הנדסיים עבור ISL8483CPZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ISL8483CPZ when the board already uses an 8-PDIP footprint, the system operates from 5 V, and one RS-485/RS-422 transmitter and receiver are required. Its -40°C to +85°C range suits industrial and telemetry equipment, while the through-hole format is convenient for prototypes and low-to-medium-volume through-hole assemblies. The Renesas ISL8483IPZ is the closest same-family candidate, but confirm its exact suffix rating, pinout, lifecycle status, and electrical limits before substituting it. Do not use ISL8483IBZ or ISL8483EIBZ-T7A on the original PCB because their 8-SOIC packages require a different footprint. For a new high-volume surface-mount design, prioritize a package-matched surface-mount transceiver rather than adapting the DIP device.

השוואה עם חלופות

פרמטר מוצר זה ISL8483IPZ
Package 8-PDIP (0.300 in, 7.62 mm) 8-PDIP (0.300 in, 7.62 mm)
Brand Renesas Electronics Renesas Electronics
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage 5 V 5 V
Transmitter Count 1 1
Receiver Count 1 1
Operating Mode High speed or slew-rate limited High speed or slew-rate limited
Mounting Type Through hole Through hole
Special Features Low power Low power

מבדילים עיקריים

  • Through-hole integration in a compact 8-PDIP package (לעומתISL8483IBZ)
  • Broad industrial temperature coverage (לעומתISL8483IPZ)
  • One-transmitter and one-receiver integration (לעומתISL8483IPZ)

הערות תכנון

Route the two differential bus conductors as a closely coupled pair with continuous ground reference, minimize branch stubs, and keep the transceiver away from switching nodes. Differential impedance continuity and symmetric routing improve noise immunity, while a common-reference conductor helps constrain the receiver's common-mode range. Use the manufacturer pin-description table to assign the exact driver-enable and bus terminals before laying out the 8-PDIP footprint.

Do not install termination resistors at every RS-485 node. A resistor commonly belongs at each physical end of the main trunk, with topology-specific consideration for stub branches. Multiple parallel terminations can over-damp the bus and reduce usable signal amplitude. Also ensure only one driver actively asserts the bus at a time, because simultaneous transmission from multiple nodes can produce high current and unreliable data.

Choose high-speed operation for maximum data throughput, but evaluate slew-rate-limited operation when long cables, adjacent cables, or sensitive neighboring circuits make fast edge transitions undesirable. Control the edge rate in the driver and verify radiated emissions with the final cable, connectors, enclosure, and grounding arrangement. Slowing the edge may reduce EMI but can reduce the usable bit rate, so validate both timing margin and emissions on production hardware.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available technical information identifies the interface function, package, voltage, temperature range, and mounting method but does not state compliance declarations.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ISL8483CPZ datasheet ISL8483CPZ datasheet pdf ISL8483CPZ pinout ISL8483CPZ equivalent ISL8483CPZ replacement ISL8483CPZ cross reference ISL8483CPZ vs ISL8483IPZ ISL8483CPZ vs ISL8483IBZ Renesas ISL8483CPZ ISL8483CPZ 5V RS-485 transceiver ISL8483CPZ 8-PDIP footprint ISL8483CPZ industrial sensor network ISL8483CPZ price ISL8483CPZ stock

רכיבים ומונחים קשורים

Renesas Electronics ISL8483CPZ ISL8483IPZ ISL8483IBZ ISL8483EIBZ-T7A RS-485 transceiver RS-422 transceiver differential interface IC interface IC balanced differential signaling half-duplex communication 8-PDIP DIP package through-hole technology surface-mount technology 5 V power supply operating temperature common-mode voltage driver enable bus termination slew-rate limiting electromagnetic interference industrial automation sensor network building control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר