ISL8483CPZ - 5V RS-485/RS-422 Transceiver | Renesas
MPN: ISL8483CPZ ✓ 啟用中ISL8483CPZ 概覽
An RS-485/RS-422 transceiver is a differential interface IC used to connect a host controller or programmable logic device to a balanced communication bus. The transceiver converts a logic-level signal into a differential bus signal and receives a differential bus signal into logic. It belongs to the interface IC hierarchy, which connects embedded controllers, sensors, industrial equipment, and communications infrastructure while electrically isolating the logic side from common-mode bus noise.
The principal feature of the ISL8483CPZ is its combination of one transmitter and one receiver in a compact 8-PDIP package. Its 5 V supply operation suits conventional embedded and industrial logic systems. The manufacturer describes the family as low power, with high-speed and slew-rate-limited operating choices intended for different bus lengths, endpoint arrangements, and electromagnetic-interference requirements.
Technically, the part operates as a balanced line-interface solution for RS-422 point-to-point links and multidrop RS-485 networks. The high-speed mode supports maximum communication throughput, while slew-rate limiting reduces the bandwidth of transition edges and can help control radiated emissions in longer or noisier installations. Designers must still verify termination, biasing, grounding, and common-mode limits against the complete bus topology.
Typical uses include industrial sensor networks, factory automation equipment, building-control nodes, remote telemetry links, and embedded measurement systems. The device is especially appropriate where a 5 V controller requires a wired differential connection but a surface-mount package is unnecessary. Its through-hole DIP format can simplify prototype assembly and inspection.
A critical design consideration is the bus network configuration. Use a termination resistor only where the signal topology requires it, and avoid placing excessive termination across every node. Maintain a common reference between communicating equipment, provide a suitable return path, and verify maximum cable length, node count, and driver loading before release.
This page combines the exact package, interface, voltage, temperature, and transceiver information with drop-in replacement analysis, comparison parameters, and practical bus-layout guidance. It is intended to help engineers evaluate the ISL8483CPZ against equivalent 8-PDIP interface choices before committing a PCB or production BOM.
直接替換替代品,適用於 ISL8483CPZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ISL8483CPZ (相同外形與佔位) — 差異在於 Mounting Type, Operating Temperature Range, Package, Product Type, Receiver Count.
ISL8483IPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ISL8483CPZ 規格
| Product Type | RS-485/RS-422 transceiver |
| 供應電壓 | 5 V |
| Transmitter Count | 1 |
| Receiver Count | 1 |
| Supported Standards | RS-485 and RS-422 |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 8-PDIP, 0.300 in (7.62 mm) width |
| 安裝類型 | Through hole |
| Signal Mode | Balanced differential |
| Operating Mode | High speed or slew-rate limited |
| Power Class | Low power |
ISL8483CPZ 8-pdip, 0.300 in (7.62 mm) width 腳位配置指南
ISL8483CPZ(8-pdip, 0.300 in (7.62 mm) width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ISL8483CPZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
ISL8483CPZ 適用於 6 應用s: Industrial Sensor Networks, Building Control Networks, Remote Telemetry Equipment, Factory Automation Controllers, Test and Measurement Systems, Embedded Equipment Communication.
Industrial Sensor Networks
The ISL8483CPZ fits 5 V industrial sensor nodes that connect remote sensors to a controller over a balanced RS-485 bus. Its one-transmitter, one-receiver arrangement provides a compact interface for a half-duplex multidrop network, while the -40°C to +85°C rating supports equipment operating across typical industrial temperature ranges. The differential bus helps reject common-mode noise present near motors, relays, and switching power supplies. Designers should control bus edge rates when emissions are critical and verify the longest cable, highest node count, and worst-case common-mode voltage before production release.
推薦
Building Control Networks
The ISL8483CPZ is suitable for building-control units that distribute commands and collect measurements across RS-485 wiring. A 5 V system can use the transceiver to connect a microcontroller to sensors, actuators, or remote I/O modules without converting the balanced bus to a single-ended logic signal. The 8-PDIP package simplifies through-hole assembly and prototype inspection, while the -40°C to +85°C range covers many equipment rooms and control cabinets. Confirm ground-reference strategy, cable length, protective grounding, and termination placement for the installed building topology.
推薦
Remote Telemetry Equipment
The ISL8483CPZ can connect a low-power telemetry controller to a field station over a balanced differential link. Its single transmitter and single receiver support half-duplex RS-485 communication, allowing a compact endpoint to exchange commands and measurement data with a central collector. The 5 V supply requirement aligns with many embedded control boards, and the low-power transceiver family supports space- and energy-conscious designs. At the system level, use a controlled bus topology, suitable cable routing, and verified surge protection for installations exposed to outdoor or industrial transients.
推薦
Factory Automation Controllers
The ISL8483CPZ fits factory automation controllers that must exchange reliable data with distributed drives, test stations, or operator panels. Differential signaling reduces susceptibility to the common-mode noise commonly present near industrial motors and power converters. The device operates from 5 V and includes one transmitter and one receiver in an 8-PDIP package, making it practical for through-hole control boards and prototypes. Engineers should choose high-speed or slew-rate-limited operation according to cable length and emissions requirements, while validating grounding, common-mode margin, termination, and node loading.
推薦
Test and Measurement Systems
The ISL8483CPZ can serve as the communication interface in distributed test and measurement equipment where a controller gathers readings from remote instrument modules. The balanced RS-485/RS-422 capability provides a robust wired connection over distances greater than typical single-ended links, while the 8-PDIP format simplifies assembly of laboratory controller boards. Select slew-rate-limited operation when lower transition rates improve signal integrity on longer cables. Validate the complete network with the intended instruments attached, including grounds, cable length, shielding strategy, and the maximum number of connected receivers.
推薦
Embedded Equipment Communication
The ISL8483CPZ is appropriate for embedded equipment that exchanges data between a main controller and a peripheral instrument using RS-485. Its one-transmitter, one-receiver configuration avoids the space associated with a multi-channel interface, while the 5 V operating requirement supports conventional embedded logic. The 8-PDIP package is useful during development or in products assembled with through-hole processes. Confirm the driver-enable strategy to prevent bus contention and use a termination scheme matched to the physical topology rather than placing a resistor on every node.
推薦
推薦產品摘要
工程參考資料,適用於 ISL8483CPZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ISL8483IPZ |
|---|---|---|
| Package | 8-PDIP (0.300 in, 7.62 mm) | 8-PDIP (0.300 in, 7.62 mm) |
| Brand | Renesas Electronics | Renesas Electronics |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Supply Voltage | 5 V | 5 V |
| Transmitter Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Operating Mode | High speed or slew-rate limited | High speed or slew-rate limited |
| Mounting Type | Through hole | Through hole |
| Special Features | Low power | Low power |
主要差異化特點
- Through-hole integration in a compact 8-PDIP package (對比ISL8483IBZ)
- Broad industrial temperature coverage (對比ISL8483IPZ)
- One-transmitter and one-receiver integration (對比ISL8483IPZ)
設計說明
Route the two differential bus conductors as a closely coupled pair with continuous ground reference, minimize branch stubs, and keep the transceiver away from switching nodes. Differential impedance continuity and symmetric routing improve noise immunity, while a common-reference conductor helps constrain the receiver's common-mode range. Use the manufacturer pin-description table to assign the exact driver-enable and bus terminals before laying out the 8-PDIP footprint.
Do not install termination resistors at every RS-485 node. A resistor commonly belongs at each physical end of the main trunk, with topology-specific consideration for stub branches. Multiple parallel terminations can over-damp the bus and reduce usable signal amplitude. Also ensure only one driver actively asserts the bus at a time, because simultaneous transmission from multiple nodes can produce high current and unreliable data.
Choose high-speed operation for maximum data throughput, but evaluate slew-rate-limited operation when long cables, adjacent cables, or sensitive neighboring circuits make fast edge transitions undesirable. Control the edge rate in the driver and verify radiated emissions with the final cable, connectors, enclosure, and grounding arrangement. Slowing the edge may reduce EMI but can reduce the usable bit rate, so validate both timing margin and emissions on production hardware.
合規資訊
The available technical information identifies the interface function, package, voltage, temperature range, and mounting method but does not state compliance declarations.