Renesas Electronics

ISL8488IPZ - 5V RS-485/RS-422 Transceiver | Renesas

MPN: ISL8488IPZ ✗ סוף ייצור
5 V Vdss RS-422 and RS-485 Rds(on) 8-PDIP Package
כמות הזמנה מינימלית: 1 |

ISL8488IPZ סקירה

The Renesas ISL8488IPZ is a 5 V differential line transceiver with one transmitter and one receiver, supplied in an 8-pin plastic DIP package. It supports RS-485 and RS-422 balanced data transmission, providing a single transceiver for point-to-point RS-422 links and multidrop RS-485 networks. The 8-PDIP construction also permits through-hole assembly where leaded packaging is preferred.

A differential transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable transmission over cables. An RS-422 interface generally supports a driver-to-receiver topology, while RS-485 allows multiple drivers and receivers to share a bus when only one device drives at a time. The ISL8488IPZ belongs to the broader hierarchy of interface IC, communication transceiver, line transceiver, and data-conversion semiconductor.

The ISL8488IPZ is identified as a low-power, high-speed or slew-rate-limited RS-485/RS-422 transceiver. These features suit industrial equipment, instrumentation, data acquisition, and embedded systems that require balanced differential signaling over cable distances. Its single-driver, single-receiver organization also allows one transceiver to provide both transmit and receive paths within a communications interface.

The 5 V supply operation integrates with conventional embedded and industrial control systems. Differential signaling improves noise immunity by receiving the difference between two conductors rather than relying on a single signal referenced to ground. This characteristic is valuable in environments containing motors, relays, switching converters, and other sources of electrical interference.

Typical applications include industrial monitoring, test equipment, remote sensor interfaces, building controls, factory automation, and embedded serial links. In a multidrop RS-485 installation, the transceiver can communicate over a shared pair of wires when the system controls which node transmits. In RS-422 installations, separate differential pairs are commonly used for full-duplex communication.

When laying out the board, keep the transceiver close to the connector and cable interface, provide a solid ground reference, and follow the manufacturer datasheet for termination and biasing arrangements. The exact drive-strength, receive-threshold, slew-rate, and temperature limits should be confirmed from the device electrical characteristics before fixing maximum bus length or data rate.

This page organizes the ISL8488IPZ product information with interface-specific application guidance, package details, sourcing questions, and verified drop-in comparison candidates. It also highlights the design checks that matter when replacing a transceiver in an existing RS-485 or RS-422 PCB.

חלופות תחליף ישיר עבור ISL8488IPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ISL8488IPZ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, Supported Standards, Mounting Type, Maximum Data Rate.

Analog Devices
Package: 8-pin SOIC
Product Type: Full-duplex differential line transceiver
Supported Standards: EIA RS-485 and RS-422
השווה עם ISL8488IPZ →
Renesas Electronics
Package: 8-pin PDIP
Product Type: RS-485/RS-422 half-duplex transceiver
Supported Standards: RS-485 and RS-422
השווה עם ISL8488IPZ →

ISL8487IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-PDIP
RS-485/RS-422 half-duplex transceiver · BiCMOS · 5 V · 4.5 V to 5.5 V · 1 driver · 1 receiver · RS-422 and RS-485 · Half duplex

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8486IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-PDIP
Same Renesas transceiver family and 8-PDIP footprint, with slower edge-rate or data-rate performance than ISL8488IPZ; timing margin is the primary difference.

📋 חלופה להתייחסות (לא בקטלוג)

ISL8489IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-PDIP
Same Renesas transceiver family and 8-PDIP footprint, with different slew-rate or data-rate limits; verify the lower-speed direction against the original bus timing.

📋 חלופה להתייחסות (לא בקטלוג)

ISL8485IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-PDIP
RS-485/RS-422 half-duplex transceiver · 4.5 V to 5.5 V · 5 V · 5 Mbps · 1 transmitter and 1 receiver · Half-duplex · RS-485 and RS-422 · 1 unit load

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8488IPZ מפרטים

Product Type RS-485/RS-422 differential line transceiver
מתח אספקה 5 V
Transmitter Count 1
Receiver Count 1
Supported Standards RS-422 and RS-485
מארז 8-PDIP
מספר פינים 8 pins
סוג הרכבה Through-hole
Power Class Low-power
Signal Type Differential balanced

תצורת פינים של ISL8488IPZ

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
פין 1 RO — Receiver output
פין 2 /RE — Active-low receiver enable input
פין 3 DE — Driver enable input
פין 4 DI — Driver data input
פין 5 GND — Ground reference
פין 6 A — Non-inverting differential bus terminal
פין 7 B — Inverting differential bus terminal
פין 8 VCC — 5 V supply connection

יישומים טיפוסיים

ISL8488IPZ מתאים עבור 6 יישוםs: Industrial Sensor Networking, Factory Automation Equipment, Test and Measurement Instruments, Building and HVAC Controls, Data Acquisition Systems, Embedded Communication Port.

🏭

Industrial Sensor Networking

The ISL8488IPZ fits industrial sensor networks that use a 5 V RS-485 bus for remote measurements. Its differential receiver rejects common-mode noise picked up between field wiring and the controller enclosure, while one transmitter and one receiver support a compact half-duplex interface. The device is placed between the host UART or processor I/O and a protected connector-side transceiver path. Designers should confirm data rate, common-mode limits, and thermal performance against the cable length and environmental conditions before using the ISL8488IPZ in a new controller.

🏭

Factory Automation Equipment

The ISL8488IPZ is useful in factory automation equipment that must exchange commands and status data with remote actuators, motion controllers, or operator panels. The 5 V supply supports conventional embedded power systems, and the RS-485/RS-422 interface provides a balanced path that is less susceptible to electrical noise than a single-ended serial link. One driver and one receiver can serve a multidrop half-duplex bus or separate full-duplex RS-422 pairs. The implementation must preserve the enable-control timing and manufacturer-recommended bus termination.

🔧

Test and Measurement Instruments

The ISL8488IPZ can connect laboratory and field-test instruments to remote fixtures over an RS-485 or RS-422 differential bus. The balanced interface reduces susceptibility to noise generated by adjacent test equipment, while the single-transmitter, single-receiver organization gives a straightforward way to implement half-duplex command and response traffic. Use the transceiver near the external connector to minimize exposed high-impedance paths, and verify that the selected slew rate and bus timing remain valid over the intended cable distance.

🏭

Building and HVAC Controls

The ISL8488IPZ is appropriate for building-control networks carrying sensor readings and actuator commands between distributed controllers. A 5 V RS-485 interface supports a balanced connection that is useful in buildings containing fluorescent lighting, motor drives, switching supplies, and long cable runs. The transceiver’s one-driver, one-receiver arrangement can support a multidrop bus when only one controller transmits at a time. Board designers should add the required protection network, maintain a continuous reference ground, and observe the manufacturer's enable and termination guidance.

📊

Data Acquisition Systems

The ISL8488IPZ supports distributed data-acquisition systems where multiple measurement stations must forward results over a shared cable. Its differential RS-485 operation is well suited to electrically noisy environments because the receiver responds to the voltage difference across a pair rather than to a single conductor referenced to ground. A single transceiver pair provides both transmit and receive functions for half-duplex traffic. The bus should include the correct termination and biasing arrangement, and the selected data rate should be derated for cable length and node count.

🧩

Embedded Communication Port

The ISL8488IPZ provides a compact physical layer between an embedded processor UART and a balanced external bus. The 8-PDIP package is convenient for leaded industrial controller boards and legacy equipment where a surface-mount transceiver is not required. Driver-enable and receiver-enable inputs allow firmware or hardware to control bus direction, supporting half-duplex communication over one RS-485 pair. Because the transceiver is not a complete protocol controller, the embedded system must also handle framing, addressing, collision avoidance, and bus timing.

What is the operating voltage of ISL8488IPZ?
The ISL8488IPZ operates from a 5 V supply. The manufacturer identifies the device as a 5 V, low-power RS-485/RS-422 transceiver in an 8-pin DIP package. Confirm the permitted supply tolerance and operating temperature range in the Renesas or Intersil device datasheet before finalizing a power rail or industrial temperature design.
Is ISL8488IPZ an RS-485 or RS-422 transceiver?
The ISL8488IPZ supports both RS-485 and RS-422 differential interfaces. It contains one transmitter and one receiver, allowing one package to handle both directions of a half-duplex link or to support separate point-to-point paths in an RS-422 system. The relevant driver-enable and receiver-enable controls are listed in the 8-PDIP pinout.
What package does the ISL8488IPZ use?
The ISL8488IPZ is supplied in an 8-pin plastic DIP, or 8-PDIP, package. It is a through-hole device rather than a surface-mount package. The DIP footprint has eight pins with a 0.300-inch row spacing, and the package drawing in the manufacturer datasheet should be used when creating a replacement PCB.
Where can I download the ISL8488IPZ datasheet PDF?
The ISL8488IPZ datasheet PDF is available through the Renesas product documentation path and the indexed manufacturer copies linked on this page. Use the manufacturer datasheet to verify pin functions, electrical limits, recommended application circuits, and package dimensions. The indexed document is titled “5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers.”
Where can I find the ISL8488IPZ pinout?
The ISL8488IPZ pinout appears in the manufacturer datasheet’s pin-description and connection-diagram sections. The 8-PDIP arrangement provides the receiver output, receiver-enable input, driver-enable input, driver input, ground, differential A and B terminals, and supply connection. Follow the numbered package drawing when assigning tracks rather than relying only on a generic transceiver layout.
What can replace the ISL8488IPZ?
The closest replacement should use the same 8-PDIP footprint, one driver, one receiver, 5 V operation, and compatible RS-485/RS-422 electrical behavior. ISL8487IPZ and ISL8486IPZ are the closest same-family Renesas options, but their slew-rate and data-rate characteristics must be checked against the original design. A replacement is suitable only after comparing enable logic, thresholds, bus loading, and temperature limits.
Is the ISL8488IPZ the same as MAX488ESA+?
The ISL8488IPZ and MAX488ESA+ perform similar single-driver, single-receiver RS-485/RS-422 functions, but they are not automatically interchangeable. The package suffix, pin arrangement, supply limits, slew rate, receiver thresholds, and timing must match the target PCB. MAX488ESA+ is a surface-mount-class alternative rather than a confirmed 8-PDIP drop-in replacement.
IS ISL8488IPZ versus ISL8487IPZ — which is better for a faster bus?
The ISL8488IPZ is the better starting point when the original design depends on its higher-speed or slew-rate-limited behavior. ISL8487IPZ belongs to the same Renesas family and 8-PDIP format, but its data-rate and edge-rate limits may reduce margin in a timing-critical link. Compare the two datasheets’ maximum data rate and slew-rate tables before making a production substitution.
When should I choose ISL8488IPZ over ISL8486IPZ?
Choose ISL8488IPZ when the interface requires the higher-speed capability associated with the device family. ISL8486IPZ may be adequate for slower RS-485 links, but its slower switching behavior can increase transition-time and timing margins relative to ISL8488IPZ. Cable length, topology, node count, and termination requirements should also be evaluated when selecting between them.
What is the best Renesas equivalent for ISL8488IPZ?
The best Renesas equivalent depends on the exact performance target. ISL8487IPZ and ISL8486IPZ are the closest same-family 8-PDIP candidates, while ISL8489IPZ represents another potential member of the broader transceiver range. Use ISL8488IPZ when its specified operating behavior is required, and select a lower-numbered family member only after confirming that the reduced data rate or slew rate is acceptable.
Is ISL8488IPZ suitable for an industrial RS-485 bus?
The ISL8488IPZ is suitable for industrial RS-485 designs when its supply voltage, temperature range, common-mode limits, and data rate meet the system requirements. Its differential signaling supports noise-resistant communication over cable. Verify the exact environmental ratings and transient immunity in the manufacturer datasheet because those limits are not summarized by the catalog listing.
What are the key specifications of ISL8488IPZ that engineers should know?
The key ISL8488IPZ specifications are 5 V operation, one transmitter, one receiver, support for both RS-485 and RS-422, low-power operation, and an 8-PDIP package. The part is described as a high-speed or slew-rate-limited differential transceiver. Its maximum data rate, supply current, receiver threshold, driver current, and temperature range are defined in the manufacturer electrical-characteristics tables.
Where to buy ISL8488IPZ online?
Use the “Request a Quote” form on this page to ask for ISL8488IPZ availability, order quantity, and delivery information. The form is the appropriate route for a quotation because market availability and lead time can change independently of the technical specifications. Provide the exact ISL8488IPZ suffix when requesting a quotation to avoid confusion with other package variants.
What is the price of ISL8488IPZ?
The current commercial price for ISL8488IPZ should be obtained through the “Request a Quote” form on this page. Pricing can vary with quantity, package suffix, stock position, and delivery requirements. Submit the exact MPN and required quantity so the quotation reflects the correct 8-PDIP device rather than a related family member.
Is ISL8488IPZ in stock, and what is its lead time?
Request current ISL8488IPZ stock status and lead time through the “Request a Quote” form on this page. Inventory and production timing can change, so neither quantity nor delivery should be inferred from the product category or lifecycle field. State the required shipment date and target quantity in the request to obtain an actionable supply commitment.

נתוני עזר הנדסיים עבור ISL8488IPZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ISL8488IPZ when rebuilding a leaded RS-485 or RS-422 interface that requires a 5 V, one-driver, one-receiver transceiver in an 8-PDIP footprint. It is particularly appropriate when the original design depends on the higher-speed or slew-rate-limited behavior of the ISL8488 family. ISL8487IPZ, ISL8486IPZ, ISL8489IPZ, and ISL8485IPZ are same-family candidates for an existing leaded PCB, but each may change edge rate or maximum data rate, so the original timing budget must be recalculated. A MAX488ESA+ or similar device should be selected only when the board can change to a compatible surface-mount footprint and the electrical characteristics have been checked. For a new multidrop bus, prioritize validated data rate, common-mode range, enable polarity, protection requirements, and cable topology over nominal transceiver equivalence.

השוואה עם חלופות

פרמטר מוצר זה ISL8487IPZ ISL8486IPZ ISL8489IPZ ISL8485IPZ
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-PDIP 8-PDIP - same 8-PDIP - same 8-PDIP - same 8-PDIP - same
Transmitter Count 1 1 1 1 1
Receiver Count 1 1 1 1 1
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Supported Interfaces RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422
Power Class Low-power Low-power Low-power Low-power Low-power
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole

מבדילים עיקריים

  • Combines RS-485 and RS-422 operation in one transceiver (לעומתMAX488ESA+)
  • Through-hole package supports leaded industrial board layouts (לעומתMAX488ESA+)
  • Same-family option retains 5 V single-driver, single-receiver organization (לעומתISL8486IPZ)

הערות תכנון

Place the ISL8488IPZ close to the external connector and route the A and B differential pair as a tight, matched pair. Keep the transceiver-side ground reference continuous and return it through the cable shield or connector ground according to the installation architecture. Avoid sharing wide ground-current paths between the transceiver and switching circuitry because those currents can create differential noise even when the bus itself is balanced.

Do not substitute a family member solely because it has an 8-pin DIP outline. Compare data rate, slew rate, receiver thresholds, driver output limits, enable polarity, and common-mode range in the manufacturer electrical tables. The ISL8487IPZ, ISL8486IPZ, ISL8489IPZ, and ISL8485IPZ alternatives may change edge-rate or timing margins, which can invalidate a previously validated cable and topology.

Apply termination and fail-safe biasing at the physical ends of the bus rather than at every node. A multidrop RS-485 network normally uses termination at the two remote ends, while bias resistors establish the idle state at one suitable location. Confirm resistor values and enable polarity in the datasheet application circuit before applying them because incorrect biasing can increase common-mode current or prevent a receiver from detecting the idle state.

Decouple the 5 V transceiver supply locally with the capacitance and placement specified by the manufacturer application circuit. Keep switching-regulator and high-current return paths away from the A and B traces, and provide controlled rise time at enable pins to avoid unwanted bus transitions. These practices reduce false receiver activity and improve interoperability in systems where multiple nodes share the same cable.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available catalog information identifies the device as a 5 V RS-485/RS-422 transceiver in an 8-PDIP package but does not state environmental or substance-compliance status.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ISL8488IPZ datasheet ISL8488IPZ pinout ISL8488IPZ datasheet pdf Renesas ISL8488IPZ ISL8488IPZ 8-PDIP pinout ISL8488IPZ RS-485 transceiver ISL8488IPZ RS-422 interface ISL8488IPZ replacement ISL8488IPZ equivalent ISL8488IPZ vs MAX488ESA+ ISL8488IPZ price ISL8488IPZ stock ISL8488IPZ industrial bus

רכיבים ומונחים קשורים

Renesas Electronics Intersil ISL8488IPZ ISL8487IPZ ISL8486IPZ ISL8489IPZ ISL8485IPZ MAX488ESA+ RS-485 RS-422 differential line transceiver interface IC communication transceiver balanced differential signaling 5 V transceiver 8-PDIP DIP package through-hole package half-duplex communication multidrop bus industrial automation data acquisition slew rate common-mode rejection
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר