Microchip Technology

KSZ8081MLXCA - 3.3V 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8081MLXCA ✓ פעיל
Single supply Vdss 48-LQFP, 7 mm × 7 mm Package 10 Mbps and 100 Mbps Speed
כמות הזמנה מינימלית: 1 |

KSZ8081MLXCA סקירה

The Microchip Technology KSZ8081MLXCA is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with a 100 Mbps data rate, a 3.135 V to 3.465 V operating-voltage range, and a 48-LQFP 7 mm × 7 mm package. It transmits and receives Ethernet data over standard Category 5 unshielded twisted-pair cable.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signals suitable for twisted-pair networking and converts incoming signals back into digital data. In the network hierarchy, the KSZ8081 belongs to Ethernet interface ICs, where it provides the physical-layer function between a media-access controller and a network cable.

The KSZ8081 supports both 10BASE-T and 100BASE-TX operation from one integrated PHY. Its single-supply 3.3 V architecture reduces the number of external supply rails required in compact equipment, while the 48-LQFP package provides 48 electrical and thermal-pad-related package positions for a conventional surface-mount PCB layout. The device is intended for 10/100 Ethernet rather than gigabit Ethernet.

Microchip describes the KSZ8081 as a highly integrated PHY that reduces board cost and simplifies implementation of 10BASE-T/100BASE-TX network ports. This integration is valuable in industrial controllers, embedded systems, access equipment, and communication products where an Ethernet connection must coexist with a digital host controller over a compact board area.

Typical uses include industrial Ethernet control systems, embedded gateways, serial-to-Ethernet equipment, network-connected test instruments, building-control interfaces, and compact communication modules. The PHY can be paired with a suitable Ethernet media-access controller, and its CAT-5 UTP compatibility supports conventional copper Ethernet infrastructure.

PCB design should follow the pin-description and layout guidance in the manufacturer datasheet, particularly for the differential TX and RX pairs, crystal or clock circuitry, decoupling, and the exposed thermal pad. Maintain controlled-impedance routing for the 100BASE-TX differential pairs and provide low-impedance power and ground planes around the transceiver.

This product page combines the manufacturer’s PHY description with package, voltage, temperature, and cross-reference details, then organizes the engineering trade-offs around PCB layout, network compatibility, documentation, and genuine same-footprint alternatives. These practical considerations help shorten component-selection and hardware-validation work.

חלופות תחליף ישיר עבור KSZ8081MLXCA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

KSZ8081MLIA

✅ Drop-In
📦 48-LQFP
Operating-temperature range changes from 0 °C to 70 °C to -40 °C to 85 °C, while the PHY and LQFP package family remain the same

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8081MLXCC

✅ Drop-In
📦 48-LQFP
Same-brand KSZ8081 ordering variant; key electrical and temperature differences are not quantified in the available cross-reference listing

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8081MLXCA-TR

✅ Drop-In
📦 48-LQFP
Same electrical device with a tape-and-reel order suffix; core electrical ratings and 48-LQFP footprint are unchanged

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8081MLICA

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 48-LQFP
Same-family industrial-temperature ordering variant, typically differing from the commercial-temperature ordering code by temperature grade

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8081MLCC

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 48-LQFP
Same-family commercial-temperature ordering variant with the 48-LQFP footprint retained; exact suffix differences require ordering-code verification

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8081MLXCA מפרטים

Device Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Ethernet Speeds 10 Mbps and 100 Mbps
Data Channels 1 channel
Supply Type Single supply
Operating Voltage Range 3.135 V to 3.465 V
Nominal Supply Voltage 3.3 V
Cable Compatibility CAT-5 unshielded twisted-pair cable
מארז 48-LQFP, 7 mm × 7 mm
מספר פינים 48 pins
סוג הרכבה Surface-mount
Minimum Operating Temperature 0 °C
Maximum Operating Temperature 70 °C
Ethernet Interface Class Full Ethernet
טווח טמפרטורת פעולה 0 °C to 70 °C
סטטוס RoHS unknown

מדריך תצורת פינים של KSZ8081MLXCA 48-lqfp, 7 mm × 7 mm

תצורת פינים עבור KSZ8081MLXCA (מארזת 48-lqfp, 7 mm × 7 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 48-lqfp, 7 mm × 7 mm עבור KSZ8081MLXCA

אין נתוני פריסת פינים מפורטים עבור KSZ8081MLXCA.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

KSZ8081MLXCA מתאים עבור 6 יישוםs: Industrial Ethernet Control Equipment, Embedded Network Gateways, Serial-to-Ethernet Communication Modules, Networked Test and Measurement Instruments, Building-Control and Automation Interfaces, Compact Communication and Access Equipment.

🏭

Industrial Ethernet Control Equipment

The KSZ8081MLXCA suits compact industrial controllers that require a 10/100 Ethernet physical layer without a separate multi-rail PHY design. Its 3.135 V to 3.465 V operating range is centered on a 3.3 V system supply, while the 100BASE-TX capability supports faster traffic than 10BASE-T on suitable CAT-5 UTP networks. Place the PHY beside the host media-access controller and route its differential TX and RX pairs as controlled-impedance nets. The principal design trade-off is its 0 °C to 70 °C rating, which suits controlled indoor equipment but requires an extended-temperature alternative for harsher enclosures.

🌐

Embedded Network Gateways

The KSZ8081MLXCA provides the copper-network interface in an embedded gateway that bridges a local processor or microcontroller to a 10/100 Ethernet network. Its single-supply 3.3 V operation reduces power-tree complexity, and the 48-LQFP package supports a conventional surface-mount layout with direct access to the Ethernet differential pairs. The PHY must be paired with a compatible media-access controller and an appropriate clock source. Compared with adding a discrete magnetics-based Ethernet interface, the integrated PHY can reduce board area, although designers must still implement the required external network components and controlled-impedance routing.

📡

Serial-to-Ethernet Communication Modules

A serial-to-Ethernet module can use the KSZ8081MLXCA to add a 10/100 copper-network port to an embedded serial platform. The PHY supports both 10BASE-T and 100BASE-TX, allowing the host controller to negotiate the appropriate rate on the connected network. The 3.3 V single-supply architecture is useful in compact modules where supply rails and board area are constrained. Designers should reserve the manufacturer-recommended clock, decoupling, and magnetics support networks and route the differential pairs away from switching nodes and high-current paths. The part’s 0 °C to 70 °C range limits its use in unheated outdoor enclosures.

🖥️

Networked Test and Measurement Instruments

The KSZ8081MLXCA can provide the 10/100 Ethernet link for laboratory instruments that exchange commands and measurement data with a host computer. A 100BASE-TX-capable PHY supports responsive transfers over switched office networks, while 10BASE-T compatibility allows operation on older infrastructure. The 48-LQFP package is practical for multilayer PCBs where the PHY can be placed near the RJ45 connector and network magnetics to shorten sensitive differential traces. Keep the TX and RX pairs impedance controlled, provide a clean 3.3 V supply, and isolate analog or high-speed measurement circuitry from the Ethernet section to avoid coupling.

🏠

Building-Control and Automation Interfaces

The KSZ8081MLXCA is appropriate for building-control modules that need reliable 10/100 Ethernet communication within an indoor automation network. Its integrated PHY supports CAT-5 UTP cabling and a single 3.3 V supply, simplifying integration with embedded controllers and communications processors. The commercial temperature range of 0 °C to 70 °C covers many conditioned rooms but may not cover unheated equipment cabinets. Select the extended-temperature KSZ8081MLIA when enclosure temperatures can fall below 0 °C. PCB implementation should follow the manufacturer’s differential-pair and power-layout guidance to maintain reliable network performance.

🔧

Compact Communication and Access Equipment

The KSZ8081MLXCA can add a standard copper-Ethernet port to compact access equipment such as protocol converters, terminal servers, and network supervisory modules. Supporting both 10BASE-T and 100BASE-TX gives the host controller link flexibility across modern and legacy networks. The single-supply 3.3 V design and 48-LQFP package allow the PHY to be placed near the connector and isolation components while keeping the layout manageable. Designers should verify the complete pin assignment, clock requirements, external magnetics network, and impedance-controlled pair geometry from the manufacturer datasheet before releasing the PCB.

What is the KSZ8081MLXCA?
The KSZ8081MLXCA is a single-supply Ethernet physical-layer transceiver for 10BASE-T and 100BASE-TX networks. According to the Microchip Technology datasheet, it transmits and receives data over standard CAT-5 unshielded twisted-pair cable, supports one 100 Mbps channel, and operates from a 3.3 V supply in a 48-LQFP package.
What is the operating voltage of the KSZ8081MLXCA?
The KSZ8081MLXCA operates from 3.135 V to 3.465 V around its nominal 3.3 V supply. The Microchip Technology product documentation identifies the device as a single-supply PHY, so the design should maintain its 3.3 V rail within the specified operating range while supporting Ethernet clocking and communication functions.
Where can I download the KSZ8081MLXCA datasheet PDF?
The manufacturer-hosted KSZ8081MLXCA datasheet PDF is available from Microchip Technology’s DeviceDoc download address. It is the primary source for the complete pin-description table, electrical characteristics, reference circuitry, timing information, and PCB-layout guidance. Use the manufacturer document rather than relying on a secondary summary when assigning pins or checking absolute maximum ratings.
Where can I find the KSZ8081MLXCA pinout?
The KSZ8081MLXCA pinout is documented in the Microchip Technology manufacturer datasheet, beginning with the package pin-description and connection tables. The device uses a 48-LQFP package, so verify all 48 positions against the diagram and pin table before fabrication. In particular, assign power, ground, clock, management-interface, and differential Ethernet signals directly from the datasheet.
Is the KSZ8081MLXCA suitable for 100 Mbps Ethernet?
Yes, the KSZ8081MLXCA supports 100BASE-TX operation at 100 Mbps as well as 10BASE-T at 10 Mbps. According to the Microchip Technology datasheet, the PHY communicates over standard CAT-5 unshielded twisted-pair cable. It is appropriate for 10/100 networks, but it is not a gigabit Ethernet transceiver.
What is the difference between KSZ8081MLXCA and KSZ8081MLIA?
The principal reported difference is the temperature grade: KSZ8081MLXCA is specified from 0 °C to 70 °C, while KSZ8081MLIA is specified from -40 °C to 85 °C. Both provide a single-channel 100 Mbps PHY in the same LQFP family. Choose MLIA when the enclosure can reach below 0 °C or operate above 70 °C.
What is the best drop-in replacement for KSZ8081MLXCA?
KSZ8081MLIA is the closest temperature-grade alternative because it retains the 48-LQFP family and Ethernet PHY function while extending the operating range to -40 °C to 85 °C. Other KSZ8081 suffix variants can differ in temperature grade, packing, or ordering code, so confirm the manufacturer pin table and ordering information before treating any variant as a drop-in replacement.
What can replace the KSZ8081MLXCA?
KSZ8081MLIA can replace the KSZ8081MLXCA when its wider -40 °C to 85 °C temperature rating is acceptable and the 48-LQFP pin assignment matches. KSZ8081MLXCA-TR provides the same device ordering in a tape-and-reel presentation, but packing alone does not change the electrical design. Cross-brand PHYs require separate pin, timing, and layout validation.
When should I choose KSZ8081MLXCA over KSZ8081MLIA?
Choose KSZ8081MLXCA when the product operates only within 0 °C to 70 °C and a commercial-temperature PHY is sufficient. Choose KSZ8081MLIA when the assembly may encounter subzero or hotter conditions, because its stated -40 °C to 85 °C range provides additional environmental margin. The electrical decision should still confirm that both devices use the same 48-LQFP pin configuration.
Is KSZ8081MLXCA suitable for industrial Ethernet equipment?
The KSZ8081MLXCA is suitable for industrial equipment whose guaranteed internal operating range remains within 0 °C to 70 °C. It integrates a 10/100 Ethernet PHY in a 48-LQFP package and supports CAT-5 UTP cabling. For installations exposed to temperatures outside that range, an extended-temperature variant such as KSZ8081MLIA is more appropriate.
Where to buy KSZ8081MLXCA online?
Use the Request a Quote form on this page to request KSZ8081MLXCA availability, order quantity, and current commercial terms. The manufacturer part number identifies the specific 48-LQFP Ethernet PHY configuration, so include the required quantity, packaging preference, and destination country when submitting the request.
What is the price of KSZ8081MLXCA?
The current commercial price for KSZ8081MLXCA is obtained through the Request a Quote form on this page. Quote requests can reflect quantity, packaging, shipment destination, and current component availability. The exact MPN and requested quantity should appear in the request so the returned commercial proposal matches the 48-LQFP Ethernet PHY configuration.
What is the lead time and stock status for KSZ8081MLXCA?
Current lead time, minimum order quantity, and stock status should be requested through the Request a Quote form on this page. Include the target quantity and required delivery date in the request. These commercial conditions can change with production schedules and component availability, so they should be confirmed for the specific order rather than treated as a fixed catalog attribute.
What are the key specifications of KSZ8081MLXCA that engineers should know?
The KSZ8081MLXCA is a single-supply, one-channel 10BASE-T/100BASE-TX PHY with a 100 Mbps maximum data rate. According to the Microchip Technology datasheet, it supports CAT-5 UTP cabling, operates from 3.135 V to 3.465 V, and uses a 48-LQFP 7 mm × 7 mm package rated from 0 °C to 70 °C for this ordering code.
Can a Microchip KSZ8081 variant replace the KSZ8081MLXCA?
A Microchip KSZ8081 variant can serve as a candidate only after its temperature grade, package, pin assignment, supply voltage, and ordering suffix are checked. KSZ8081MLIA is the relevant extended-temperature option, while KSZ8081MLXCA-TR changes the order presentation. Confirm these details in the manufacturer datasheet and product documentation before approving a substitution.

נתוני עזר הנדסיים עבור KSZ8081MLXCA — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose KSZ8081MLXCA for a 10/100 Ethernet design that operates from a 3.3 V supply and remains between 0 °C and 70 °C. Its 48-LQFP package, single-supply architecture, and support for CAT-5 UTP make it suitable for embedded gateways, industrial controls, access equipment, and networked instrumentation. Select KSZ8081MLIA when the same PHY family and footprint are needed in an extended-temperature environment from -40 °C to 85 °C. KSZ8081MLXCA-TR is appropriate when the core device is unchanged but automated assembly requires tape-and-reel presentation. The alternate MLXCC, MLICA, and MLCC ordering codes should be selected only after their exact temperature and ordering characteristics are confirmed. For any alternative, verify the complete 48-pin assignment, clock implementation, electrical characteristics, and reference layout before releasing a replacement PCB.

השוואה עם חלופות

פרמטר מוצר זה KSZ8081MLIA KSZ8081MLXCC KSZ8081MLXCA-TR KSZ8081MLICA KSZ8081MLCC
Package 48-LQFP, 7 mm × 7 mm 48-LQFP 48-LQFP 48-LQFP 48-LQFP 48-LQFP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Type 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY KSZ8081 Ethernet PHY family 10BASE-T/100BASE-TX Ethernet PHY KSZ8081 Ethernet PHY family KSZ8081 Ethernet PHY family
Order Presentation Standard KSZ8081MLXCA ordering code Extended-temperature ordering code Alternate ordering code Tape-and-reel ordering code Extended-temperature ordering code Alternate ordering code

מבדילים עיקריים

  • Commercial-temperature ordering option (לעומתKSZ8081MLIA)
  • Single-supply 10/100 Ethernet integration (לעומתKSZ8081MLXCA-TR)
  • Direct use in 48-LQFP network designs (לעומתKSZ8081MLXCC)

הערות תכנון

Route the Ethernet TX and RX differential pairs as controlled-impedance traces referenced to a continuous ground plane. Match differential impedance and pair length according to the manufacturer’s PCB-layout guidance, and keep the PHY close to the external isolation and magnetics components. Avoid placing switching-power nodes, high-speed clocks, or other high-current paths beneath or immediately beside the differential pairs.

Use the datasheet-recommended supply decoupling and placement arrangement. The PHY operates in a narrow 3.135 V to 3.465 V range around 3.3 V, so the local rail must remain within limits across temperature, tolerance, and load transients. Place bypass capacitors at the appropriate supply pins with short ground returns, and avoid sharing high-current return paths between the PHY and noisy digital or power-conversion circuitry.

Do not select an alternative from the base family name alone. Confirm the exact ordering suffix, temperature range, package drawing, pin assignments, clock requirements, and Ethernet reference circuitry against the manufacturer datasheet. The KSZ8081MLIA extends the temperature range from 0 °C–70 °C to -40 °C–85 °C, while KSZ8081MLXCA-TR changes the order presentation. Both distinctions affect sourcing or mechanical planning.

Pay particular attention to clock-source implementation and startup behavior because the PHY must communicate reliably with the host media-access controller. Follow the manufacturer’s reference schematic for crystal, oscillator, termination, and bias components, and maintain the specified trace geometry. Validate startup with the intended host controller because seemingly interchangeable family variants can differ in clock or reset implementation even when they use the same package.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations were not identified in the product documentation reviewed for this ordering code. The Ethernet PHY is not an automotive-qualified ordering variant on the basis of the available information.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

KSZ8081MLXCA datasheet KSZ8081MLXCA pinout KSZ8081MLXCA datasheet pdf KSZ8081MLXCA equivalent KSZ8081MLXCA replacement KSZ8081MLXCA price KSZ8081MLXCA stock Microchip KSZ8081MLXCA KSZ8081MLXCA 48-LQFP pinout KSZ8081MLXCA application circuit KSZ8081MLXCA vs KSZ8081MLIA KSZ8081 10/100 Ethernet PHY

רכיבים ומונחים קשורים

Microchip Technology KSZ8081MLXCA KSZ8081MLIA KSZ8081MLXCC KSZ8081MLXCA-TR KSZ8081MLICA KSZ8081MLCC Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX 10/100 Ethernet Ethernet interface IC CAT-5 UTP 3.3 V single-supply operation 48-LQFP LQFP package family surface-mount package differential pair routing controlled impedance media-access controller industrial Ethernet embedded networking Ethernet magnetics RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר