Microchip Technology

KSZ8775CLXIC 5-Port 10/100 Ethernet Switch | Microchip

MPN: KSZ8775CLXIC ✓ פעיל
3.3 V Vdss 80-pin LQFP, 10 mm x 10 mm Package
כמות הזמנה מינימלית: 1 |

KSZ8775CLXIC סקירה

The Microchip Technology KSZ8775CLXIC is a highly integrated, Layer 2-managed, five-port 10/100 Ethernet switch with a 3.3 V supply and an 80-pin LQFP package measuring 10 mm by 10 mm. It combines three 10/100 Mbps copper ports, an RMII Port 4 interface, and a flexible Port 5 interface supporting RGMII, GMII, or RMII operation. The switch also provides automatic power saving, wake-up support, and configuration through power-up and reset pins.

An Ethernet switch is a network-interface integrated circuit that forwards Ethernet frames between a processor, network interface controllers, and physical-layer devices. The KSZ8775 belongs to the managed-switch hierarchy within Ethernet controllers, interface ICs, and broader networking semiconductors. Its Layer 2 architecture reduces the need for discrete switching components while supporting cost-sensitive embedded, industrial, and communications equipment.

The KSZ8775CLXIC's principal advantages include five integrated ports, support for copper links at 10/100 Mbps, and flexible host-facing interfaces on the two upper ports. Its automatic power-saving function helps reduce unnecessary activity in embedded systems, while the wake-up function supports designs that must resume network operation on demand. Power-up and reset configuration provides a deterministic hardware initialization path for systems without a complex manager-boot sequence.

Port 4 is identified as an RMII interface, while Port 5 can use RGMII, GMII, or RMII. These selectable interfaces make the device adaptable to processors, FPGAs, and communication controllers with different host-bus requirements. The combination of three copper-facing ports and two configurable upper-port interfaces creates a compact Ethernet switching hub around a single 3.3 V device.

Typical applications include industrial Ethernet gateways, embedded control systems, factory equipment, network adapters, communications appliances, and compact embedded Ethernet hubs. The device is especially useful when a design needs several 10/100 copper connections plus one or two processor-facing interfaces without implementing a discrete switching layer.

PCB design should preserve pin-compatible placement of the 80-pin LQFP footprint and route each copper-port differential pair according to the manufacturer's layout guidance. Keep the 3.3 V supply and decoupling network close to the device, and provide clean interfaces to the selected processor or FPGA. Because an Ethernet switch integrates high-speed digital links and magnetics-facing circuitry, controlled return paths and disciplined differential-pair routing are central to reliable operation.

This page consolidates the device's port configuration, interface options, sourcing information, practical design guidance, and verified drop-in comparison. The 80-pin LQFP outline and 3.3 V operation make the KSZ8775CLXIC a focused choice for compact Layer 2 switching designs that need multiple 10/100 Mbps copper ports and flexible host connectivity.

חלופות תחליף ישיר עבור KSZ8775CLXIC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

KSZ8775CLXCC

✅ Drop-In
Microchip Technology
📦 80-LQFP (10 mm x 10 mm)
Layer 2-managed Ethernet switch · 5 ports · 3 ports · RMII · MII, RMII, RGMII, and GMII · 10/100 Mbps · 10/100/1000 Mbps · Layer 2

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

KSZ8775CLXIC דירוגים מרביים ומאפיינים חשמליים

Device Type Layer 2-managed Ethernet switch
Total Port Count 5 ports
Copper Port Data Rate 10/100 Mbps
Dedicated 10/100 Mbps Copper Ports 3 ports
Port 4 Interface RMII
Port 5 Interfaces RGMII, GMII, or RMII
מתח אספקה 3.3 V
Wake-Up Function Supported
Automatic Power Saving Supported
Configuration Method Power-up and reset configuration
Switching Layer Layer 2
מארז 80-pin LQFP, 10 mm x 10 mm
סוג הרכבה Surface mount
Ethernet Standard Support 10/100 Base-T/TX
סטטוס RoHS Compliant

מדריך תצורת פינים של KSZ8775CLXIC 80-pin lqfp, 10 mm x 10 mm

תצורת פינים עבור KSZ8775CLXIC (מארזת 80-pin lqfp, 10 mm x 10 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 80-pin lqfp, 10 mm x 10 mm עבור KSZ8775CLXIC

אין נתוני פריסת פינים מפורטים עבור KSZ8775CLXIC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

KSZ8775CLXIC מתאים עבור 6 יישוםs: Industrial Ethernet Gateway, Embedded Ethernet Hub, Factory Equipment Network Controller, Network Appliance Front Panel, FPGA-Based Communication System, Low-Power Embedded Network Node.

🏭

Industrial Ethernet Gateway

The KSZ8775CLXIC fits an industrial Ethernet gateway that must combine three 10/100 Mbps copper links with a processor-facing data path. The three integrated copper ports can connect field equipment, a local controller, or diagnostic equipment, while Port 4 RMII provides a compact connection to a host processor. Port 5 can select RGMII, GMII, or RMII to accommodate a different host or FPGA interface. Operating from 3.3 V simplifies integration with contemporary embedded processors. The 80-pin LQFP package keeps the switching section compact, but designers should implement the manufacturer's differential-pair and decoupling layout, verify startup behavior, and confirm that the exact temperature and qualification grade covers the industrial environment.

🧩

Embedded Ethernet Hub

The KSZ8775CLXIC supports a compact embedded Ethernet hub in which multiple 10/100 Mbps endpoints share access to a host processor. Three copper ports can serve sensors, programmable controllers, or service interfaces, while the configurable upper ports provide the required host bandwidth and electrical interface. RMII is useful where a low-pin-count host connection is preferred, whereas RGMII or GMII can serve designs requiring a wider parallel interface. The device's Layer 2-managed architecture reduces the external switching component count. Designers should account for endpoint cable reach, magnetics requirements, firmware-based configuration, and wake-up behavior. The automatic power-saving and wake-up functions are particularly valuable in embedded systems that spend substantial time idle but must reconnect reliably after a network service event.

🏭

Factory Equipment Network Controller

The KSZ8775CLXIC is useful in factory equipment that needs a compact Ethernet connection hub for machine control, diagnostics, and service access. Three 10/100 Mbps copper ports can connect a controller, engineering workstation, and remote I/O device without adding a separate switching chipset. A host processor can attach through the Port 4 RMII interface, while Port 5 can be configured for RGMII, GMII, or RMII according to the processor interface architecture. Because the KSZ8775 operates from 3.3 V, it can share a conventional embedded supply rail with supporting digital devices. The design must provide suitable copper magnetics, robust grounding, controlled differential routing, and correct power-up configuration. Confirm the industrial temperature grade and qualification requirements before deployment in a factory environment.

🌐

Network Appliance Front Panel

The KSZ8775CLXIC can organize front-panel Ethernet connections in a compact network appliance, communications controller, or service gateway. Three copper ports provide links to a management network, an upstream equipment connection, and a local service interface, while Port 4 RMII and configurable Port 5 connectivity link the switch to an embedded host. The Layer 2-managed five-port architecture supports cost-conscious systems that need centralized switching without a complex multi-gigabit PHY arrangement. Automatic power saving can reduce link activity during idle periods, while wake-up supports recovery from low-power states. Firmware should initialize the device through the documented power-up and reset configuration path and verify interface timing after wake-up. The 80-pin LQFP footprint requires careful fanout and differential-pair routing in compact appliance designs.

📡

FPGA-Based Communication System

The KSZ8775CLXIC fits an FPGA-based communication system where an FPGA needs both network-facing copper links and a flexible processor-side interface. The three 10/100 Mbps copper ports serve external links, while Port 4 RMII offers a straightforward low-pin-count host connection and Port 5 can be selected among RGMII, GMII, or RMII. This allows the design to reserve the upper-port interface that best matches the FPGA logic and clocking resources. The 3.3 V device operates from the same supply class commonly used by embedded communication equipment. Designers should use the manufacturer's pin and timing documentation to constrain interfaces, preserve a continuous ground plane, and implement the recommended Ethernet trace geometry. Startup configuration should be coordinated with FPGA initialization so that attached PHY or processor interfaces begin in a controlled state.

🔧

Low-Power Embedded Network Node

The KSZ8775CLXIC supports low-power embedded network nodes that need several 10/100 Mbps links but cannot justify a large discrete switching design. Three copper ports can support local service, control, and monitoring connections, while Port 4 RMII offers an efficient path to a low-power microcontroller or application processor. Port 5 can use RMII, RGMII, or GMII when a host requires a wider interface. Automatic power saving reduces activity on unused links, and the wake-up function allows the system to reactivate network communication after an idle event. The correct power-management policy must be coordinated with the host and attached PHYs to avoid link flapping or interface synchronization errors. Decoupling placement, return-path continuity, and magnetics implementation remain critical to reliable Ethernet performance.

Where can I download the KSZ8775CLXIC datasheet PDF?
The KSZ8775CLXIC datasheet is available from Microchip Technology through the official KSZ8775 product page at https://www.microchip.com/en-us/product/KSZ8775. The manufacturer documentation provides the authoritative electrical characteristics, register map, interface details, package drawings, and layout guidance. Use the document associated with the KSZ8775 family and confirm that the ordering information includes the CLXIC suffix before approving a design.
What are the key specifications of KSZ8775CLXIC that engineers should know?
The KSZ8775CLXIC is a 3.3 V, Layer 2-managed five-port Ethernet switch in an 80-pin LQFP package measuring 10 mm by 10 mm. It provides three 10/100 Mbps copper ports, an RMII interface on Port 4, and selectable RGMII, GMII, or RMII operation on Port 5. The device also supports wake-up, automatic power saving, and power-up and reset configuration.
How many Ethernet ports does the KSZ8775CLXIC provide?
The KSZ8775CLXIC provides five Ethernet ports in total. Three are dedicated 10/100 Mbps copper ports, while Port 4 supports RMII and Port 5 supports RGMII, GMII, or RMII. This arrangement allows the switch to combine multiple physical copper connections with one or two host-facing digital interfaces on a single integrated circuit.
Which host interfaces are supported by the KSZ8775CLXIC?
The KSZ8775CLXIC supports RMII on Port 4 and RGMII, GMII, or RMII on Port 5, according to the Microchip KSZ8775 product documentation. RMII is useful for parallel processor interfaces, while RGMII and GMII offer additional high-bandwidth interface choices. The correct configuration must match the connected processor, FPGA, or communication controller.
Is the KSZ8775CLXIC suitable for industrial Ethernet equipment?
The KSZ8775CLXIC is suitable for industrial and embedded Ethernet equipment when its electrical, thermal, and environmental limits fit the design. Its five-port Layer 2 architecture, 3.3 V operation, automatic power saving, and wake-up function are useful for compact gateways and controllers. Confirm the device's exact temperature limits and qualification status in the manufacturer documentation before releasing an industrial design.
What can replace the KSZ8775CLXIC on the same PCB?
The KSZ8775CLXCC is the closest documented same-package candidate because it belongs to the KSZ8775 family and uses an 80-pin LQFP package. It should be treated as a conditional drop-in option only after checking temperature grade, qualification, configuration, and interface behavior in the manufacturer documentation. No cross-brand pin-compatible replacement could be confirmed, so an unqualified substitution should not be assumed.
What is the best Microchip equivalent for the KSZ8775CLXIC?
The KSZ8775CLXCC is the closest Microchip family alternative identified for the KSZ8775CLXIC because both are KSZ8775CLX devices in an 80-pin LQFP package. Compatibility still depends on matching the industrial temperature grade, qualification requirements, register configuration, and startup behavior. The KSZ8795 and KSZ8863 families have different interface or package arrangements and are not presented as direct drop-in replacements.
Where can I buy KSZ8775CLXIC and check current availability?
Use the Request a Quote form on this page to request KSZ8775CLXIC availability, current commercial terms, and a lead-time quotation for the required quantity. The form is the appropriate sourcing path for this order-on-request product, and it lets the quote reflect the exact MPN, package, and quantity rather than a family-level listing.
What is the price of the KSZ8775CLXIC?
The current commercial price for the KSZ8775CLXIC should be obtained through the Request a Quote form on this page. The quote can reflect the exact 80-pin LQFP ordering code, required quantity, and delivery expectations. Submit the target quantity and destination so the commercial response can be evaluated against the complete switching design.
What is the lead time for the KSZ8775CLXIC?
The KSZ8775CLXIC lead time depends on factory availability and the quantity requested. Use the Request a Quote form on this page with your required quantity and production schedule. Manufacturer Direct listing information indicates that standard-order timing can extend to approximately 12 weeks in one shown availability scenario, so production planning should avoid assuming immediate replenishment.
Is the KSZ8775CLXIC currently in stock?
Availability for the KSZ8775CLXIC can change with factory inventory and order quantity, so the current status should be confirmed through the Request a Quote form on this page. Manufacturer Direct listing information has shown partial-tray inventory, while other channel information describes varying stock levels. Treat those listings as time-sensitive and request a confirmed allocation for production use.
When should I choose the KSZ8775CLXIC over a discrete Ethernet switch design?
Choose the KSZ8775CLXIC when a compact system needs three 10/100 Mbps copper ports plus RMII or RGMII/GMII/RMII host connectivity in one 3.3 V device. It can reduce board area, component count, and interface duplication compared with a discrete switching implementation. A discrete design may remain preferable when the product needs different port counts, protocols, media types, or application-specific switch features.
Is the KSZ8775CLXIC suitable for an embedded Ethernet hub?
Yes, the KSZ8775CLXIC fits an embedded Ethernet hub that combines several 10/100 Mbps copper links with a processor-facing interface. Port 4 RMII and configurable Port 5 RGMII, GMII, or RMII connectivity allow the hub to align with different embedded hosts. Validate the selected interface timing, magnetics integration approach, thermal margin, and startup configuration in the final reference design.
How do power saving and wake-up functions help in KSZ8775CLXIC designs?
The KSZ8775CLXIC combines automatic power saving with a wake-up function, allowing network hardware to reduce activity when links are inactive and resume operation when required. These features are useful in embedded and industrial systems where continuous full-power operation is unnecessary. Firmware and hardware should define the wake conditions and verify that the selected Port 4 or Port 5 interface remains synchronized after reactivation.
Where is the KSZ8775CLXIC pinout and 80-pin LQFP footprint documented?
The KSZ8775CLXIC pinout, package outline, and land pattern are documented in the manufacturer KSZ8775 documentation and package drawings. The device uses an 80-pin LQFP package measuring 10 mm by 10 mm. Use those manufacturer drawings for PCB footprint creation and pin assignment rather than relying on third-party board-layout images, because exposed or no-connect details must match the selected ordering code.
What PCB layout practices are important for the KSZ8775CLXIC?
Place the KSZ8775CLXIC so that copper-port differential pairs follow the manufacturer's Ethernet layout guidance, maintain a continuous ground reference, and place the 3.3 V decoupling capacitors close to the relevant supply pins. Route RGMII, GMII, or RMII signals as a controlled interface group appropriate to their clocking requirements. Confirm line spacing, return paths, and magnetics or PHY integration using the manufacturer's reference layout.

נתוני עזר הנדסיים עבור KSZ8775CLXIC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the KSZ8775CLXIC for a compact 3.3 V design requiring three 10/100 Mbps copper ports and two host-facing switch interfaces. It is particularly suitable when Port 4 RMII and Port 5 RGMII, GMII, or RMII flexibility match a processor, FPGA, or communications controller. The integrated Layer 2-managed architecture can reduce component count and board area compared with a discrete switching implementation. Consider the KSZ8775CLXCC when its ordering attributes satisfy the temperature, qualification, and lifecycle requirements, but verify those attributes before approving a substitution. The KSZ8795 and KSZ8863 families are appropriate only when a redesign or interface change is acceptable; they should not be treated as direct drop-ins for the KSZ8775CLXIC. For systems requiring media other than 10/100 Mbps copper, substantially more ports, or application-specific switching features, evaluate a different switch architecture.

השוואה עם חלופות

פרמטר מוצר זה KSZ8775CLXCC
Brand Microchip Technology Microchip Technology
Package 80-LQFP (10 mm x 10 mm) 80-LQFP (10 mm x 10 mm)
Device Type Layer 2-managed Ethernet switch Layer 2-managed Ethernet switch
Total Port Count 5 ports 5 ports
Copper Port Data Rate 10/100 Mbps 10/100 Mbps
Dedicated 10/100 Mbps Copper Ports 3 ports 3 ports
Port 4 Interface RMII RMII
Port 5 Interfaces RGMII, GMII, or RMII RGMII, GMII, or RMII
Supply Voltage 3.3 V 3.3 V
Wake-Up Function Supported Supported
Automatic Power Saving Supported Supported
Power-Up and Reset Configuration Supported Supported

מבדילים עיקריים

  • Five-port integration in one 80-pin LQFP device (לעומתKSZ8775CLXCC)
  • Flexible upper-port host connectivity (לעומתKSZ8775CLXCC)
  • Embedded power-state support (לעומתKSZ8775CLXCC)

הערות תכנון

Create the PCB land pattern from the manufacturer's 80-pin LQFP drawing and verify it against the 10 mm by 10 mm body size and stated lead pitch. Place input and output decoupling capacitors adjacent to their corresponding supply pins, provide a continuous ground reference beneath the switching section, and preserve the manufacturer-recommended geometry for all 10/100 Mbps differential pairs. Check the copper-port and host-interface layout together rather than optimizing either group independently.

RGMII, GMII, and RMII have different clocking and timing requirements, so select one Port 5 configuration early in the architecture. Route the selected interface as a coordinated signal group, maintain the required return path, and apply the manufacturer's interface timing and layout constraints. Coordinate reset and power-up configuration with the host or FPGA so that all connected interfaces begin from a defined state and recover coherently after wake-up.

The device operates from 3.3 V, so the supply network must remain within the electrical limits documented by Microchip while providing low-impedance decoupling for switching activity. Use separate local bypass paths where recommended and keep high-current Ethernet connections away from sensitive host-interface routing. Validate startup current and worst-case activity in the complete system, then confirm that the chosen temperature grade and package dissipation capability suit the enclosure temperature.

Do not treat the I and C ordering suffixes as automatically interchangeable. Before substituting KSZ8775CLXCC for KSZ8775CLXIC, compare the manufacturer ordering table for temperature range, qualification, lifecycle, and configuration differences. Also verify that the attached magnetics or PHYs match the port arrangement and that Port 4 and Port 5 are assigned to interfaces supported by the host processor. A matching package alone does not establish complete system compatibility.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The 80-pin LQFP listing identifies the device as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified, so those fields remain unknown.

חיפושים קשורים

ksz8775clxic datasheet KSZ8775CLXIC datasheet pdf KSZ8775CLXIC pinout KSZ8775CLXIC 80-LQFP footprint KSZ8775CLXIC Ethernet switch KSZ8775CLXIC 5-port specifications KSZ8775CLXIC RMII RGMII GMII KSZ8775CLXIC equivalent KSZ8775CLXIC replacement KSZ8775CLXIC vs KSZ8775CLXCC KSZ8775CLXIC price KSZ8775CLXIC stock Microchip KSZ8775CLXIC KSZ8775CLXIC industrial Ethernet

רכיבים ומונחים קשורים

Microchip Technology KSZ8775CLXIC KSZ8775CLXCC KSZ8775 KSZ8795CLXIC KSZ8863RLLI Ethernet switch Layer 2-managed switch Ethernet controller interface IC 10/100 Mbps Ethernet 10/100 Base-T/TX RMII RGMII GMII MII 80-LQFP LQFP family surface mount SMD 3.3 V power supply wake-up function automatic power saving power-up and reset configuration industrial Ethernet gateway
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר