LAN9255-V/ZMX018 EtherCAT Controller | Microchip Technology
MPN: LAN9255-V/ZMX018 ✓ פעילLAN9255-V/ZMX018 סקירה
An EtherCAT device controller is an integrated circuit used to connect automation equipment to an EtherCAT industrial Ethernet network. It processes EtherCAT frames, provides real-time fieldbus connectivity, and supervises physical-layer communication. Within the product hierarchy, the LAN9255 is a network controller, EtherCAT device controller, Ethernet controller, and industrial communications IC with integrated MCU and dual PHYs.
The integrated Cortex-M4F processor gives the design direct access to EtherCAT processing and application-control functions rather than requiring a separate host microcontroller. Its 256K programmable memory supports firmware and protocol tasks, while the dual PHYs each support full-duplex 100BASE-TX operation at 100 Mbps. The integrated architecture reduces inter-device data paths and supports compact industrial slave-controller implementations.
The -V ordering option is specified for an extended-industrial temperature range of -40°C to +105°C. The ZMX package designation identifies a 128-pin TQFP configuration, while 018 identifies the 256K programmable-memory configuration. The package exposes the signals of the EtherCAT controller and microcontroller sections and uses an exposed pad for improved package-level heat spreading.
Typical applications include EtherCAT slave modules, industrial I/O devices, motion-control equipment, servo-drive interfaces, PLC expansion modules, and factory-automation controllers. The dual 100BASE-TX PHYs suit EtherCAT line topology implementations in which devices forward frames through successive Ethernet ports. The integrated microcontroller also enables application logic, diagnostics, and EtherCAT stack execution in a single device.
Hardware design should follow the Microchip LAN9255 Hardware Design Checklist, including correct exposed-pad soldering, multilayer board construction, controlled-impedance Ethernet routing, suitable decoupling, and isolation between PHY and digital sections. Confirm the required EtherCAT topology, cable characteristics, termination strategy, firmware configuration, and thermal performance before releasing a production PCB.
This product overview combines the manufacturer specifications, ordering-code structure, application guidance, drop-in configuration alternatives, and practical PCB considerations into one engineering reference for EtherCAT controller selection and implementation.
חלופות תחליף ישיר עבור LAN9255-V/ZMX018 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LAN9255-V/ZMX018 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Operating Temperature, Integrated MCU, Supply Voltage, EtherCAT Port Configuration.
LAN9255-V/ZMX019
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LAN9255-V/ZMX020
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LAN9255-I/ZMX019
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LAN9255-I/ZMX020
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←LAN9255-I/ZMX018
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LAN9255-V/ZMX018 מפרטים
| Product Type | EtherCAT device controller with integrated microcontroller |
| EtherCAT Port Configuration | 2/3-port |
| Integrated MCU Core | 32-bit Arm Cortex-M4F |
| Programmable Memory | 256K |
| מתח אספקה | 3.3 V |
| Ethernet Data Rate | 100 Mbps |
| Integrated PHY Count | 2 |
| PHY Standard | IEEE 802.3 100BASE-TX |
| PHY Duplex Mode | Full duplex |
| Host Interface | RMII |
| USB Interface Standard | USB 2.0 |
| טמפרטורת פעולה | -40°C to +105°C |
| מארז | 128-pin TQFP with exposed pad |
| Package Body Size | 14 mm x 14 mm |
| סוג הרכבה | Surface mount |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Export Control Classification | EAR99 |
מדריך תצורת פינים של LAN9255-V/ZMX018 14 mm x 14 mm
תצורת פינים עבור LAN9255-V/ZMX018 (מארזת 14 mm x 14 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור LAN9255-V/ZMX018.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LAN9255-V/ZMX018 מתאים עבור 6 יישוםs: EtherCAT Industrial I/O Module, Servo Drive EtherCAT Interface, PLC Communication Gateway, Motion-Control Terminal, Machine Vision Network Interface, Industrial Sensor Network Controller.
EtherCAT Industrial I/O Module
The LAN9255-V/ZMX018 fits distributed industrial I/O modules because it combines an EtherCAT device controller, Cortex-M4F processor, and two 100Mbps full-duplex PHYs in one 128-pin TQFP device. The processor can run the EtherCAT stack and channel-control firmware, while 256K of programmable memory supports configuration, diagnostics, and application logic. Its -40°C to +105°C rating suits factory-floor equipment. Place the Ethernet pairs on controlled-impedance routing and follow the manufacturer exposed-pad and decoupling guidance.
מומלץ
Servo Drive EtherCAT Interface
For compact servo-drive controllers, the LAN9255-V/ZMX018 provides the real-time EtherCAT endpoint and application-control core in one package. Its dual 100BASE-TX PHYs support the line-oriented Ethernet connections used in multi-axis systems, and the 3.3 V supply integrates with low-voltage digital power domains. The 256K memory configuration is useful for motion-control firmware when final code size remains comfortably below capacity. Validate deterministic timing, thermal rise, and Ethernet signal integrity during axis-drive qualification.
מומלץ
PLC Communication Gateway
The LAN9255-V/ZMX018 can implement a dedicated PLC-to-EtherCAT gateway because its Cortex-M4F executes protocol conversion while the EtherCAT controller handles distributed-network communication. Two integrated 100Mbps PHYs reduce the need for additional Ethernet components, and the 256K memory capacity accommodates firmware, mapping tables, and diagnostics. RMII and USB 2.0 connectivity provide additional host-facing options. Confirm the required gateway topology, watchdog strategy, and recovery behavior during system validation.
מומלץ
Motion-Control Terminal
The LAN9255-V/ZMX018 supports compact motion-control terminals that need deterministic EtherCAT participation close to the application processor. Its Cortex-M4F handles stack tasks and local control functions, while the dual PHYs provide 100Mbps full-duplex links over industrial Ethernet cabling. The integrated architecture reduces board area compared with separate controller and MCU implementations. Use the 1024K memory variant when diagnostics, coordinate tables, or update buffers exceed the 256K target's comfortable code and data capacity.
מומלץ
Machine Vision Network Interface
The LAN9255-V/ZMX018 can serve as the EtherCAT and Ethernet coordination element in a machine-vision interface, combining real-time device control with local Cortex-M4F processing. Its two 100BASE-TX PHYs support industrial cable connections at 100Mbps, and the 256K memory configuration supports protocol firmware and local status management. The -40°C to +105°C range is appropriate for enclosure temperatures encountered near industrial machinery. Maintain controlled-impedance Ethernet routing and validate EMI behavior alongside the imaging subsystem.
מומלץ
Industrial Sensor Network Controller
For distributed sensor networks, the LAN9255-V/ZMX018 combines EtherCAT slave-controller behavior with an application microcontroller and dual integrated Ethernet PHYs. The Cortex-M4F can collect measurements, maintain device state, and execute the EtherCAT stack without requiring a separate host MCU. The 100Mbps PHY rate is suitable for standard 100BASE-TX industrial Ethernet segments, while the 128-pin TQFP keeps the controller footprint compact. Confirm cable length, grounding, isolation, and thermal conditions for the installed sensor topology.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LAN9255-V/ZMX018 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LAN9255-V/ZMX019 | LAN9255-V/ZMX020 | LAN9255-I/ZMX019 | LAN9255-I/ZMX020 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-TQFP (14x14) | 128-TQFP (14x14) | 128-TQFP (14x14) | 128-TQFP (14x14) | 128-TQFP (14x14) |
| Programmable Memory | 256K | 512K | 1024K | 512K | 1024K |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Ethernet Data Rate | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps |
| Integrated PHY Count | 2 | 2 | 2 | 2 | 2 |
| Integrated MCU Core | 32-bit Arm Cortex-M4F | 32-bit Arm Cortex-M4F | 32-bit Arm Cortex-M4F | 32-bit Arm Cortex-M4F | 32-bit Arm Cortex-M4F |
| Host Interface | RMII and USB 2.0 | RMII and USB 2.0 | RMII and USB 2.0 | RMII and USB 2.0 | RMII and USB 2.0 |
| Ethernet Standard | IEEE 802.3 100BASE-TX | IEEE 802.3 100BASE-TX | IEEE 802.3 100BASE-TX | IEEE 802.3 100BASE-TX | IEEE 802.3 100BASE-TX |
| EtherCAT Configuration | 2/3-port | 2/3-port | 2/3-port | 2/3-port | 2/3-port |
מבדילים עיקריים
- Lower memory option within the same pin-compatible family (לעומתLAN9255-V/ZMX020)
- Integrated EtherCAT controller and Cortex-M4F reduce component count (לעומתLAN9255-V/ZMX019)
- Extended-industrial ordering option (לעומתLAN9255-I/ZMX018)
- More storage headroom is available without changing the footprint (לעומתLAN9255-V/ZMX018)
הערות תכנון
Follow the LAN9255 Hardware Design Checklist for the 128-pin TQFP land pattern, including the exposed-pad connection and solder-mask definition. Use a multilayer PCB with a continuous ground reference, place local 3.3 V decoupling close to the supply pins, and verify that the assembly process develops a reliable exposed-pad solder fillet. Inspect both lead solder joints and exposed-pad wetting during first-article validation.
Route each 100BASE-TX differential pair as a controlled-impedance structure with closely matched length and geometry, continuous reference planes, and minimal stubs or test-point discontinuities. Keep the Ethernet PHY section physically separated from noisy switching and high-current paths. Review the completed layout against the manufacturer's hardware checklist and validate eye quality, link establishment, and error-free operation with the intended industrial cable.
Build the 3.3 V rail with low-impedance supply distribution and place the capacitance values required by the manufacturer close to the relevant device pins. Account for combined controller, microcontroller, and dual-PHY current when sizing the regulator and copper paths. Keep analog, digital, and I/O return currents controlled so that Ethernet transceiver performance is not degraded by shared high-di/dt loops.
The 128-pin TQFP uses an exposed pad for package-level heat spreading, but thermal performance still depends on the PCB copper area, stack-up, and enclosure airflow. Conduct a board-level thermal analysis using the final layout and worst-case operating conditions. Verify the exposed-pad soldering and temperature rise at the -40°C to +105°C rating limit before approving the assembly process.
Do not substitute a device solely because it uses a 128-pin TQFP; confirm that the EtherCAT controller, dual 100BASE-TX PHYs, Cortex-M4F functions, memory option, and exposed-pad footprint match the PCB. Moving from ZMX018 to ZMX019 or ZMX020 changes available memory but can affect linker usage and firmware planning. Validate the complete ordering code and thermal option before release.
מידע על תאימות
The listing identifies the part under EAR99 export classification and shows a REACH-status field, but no explicit compliance conclusion is present. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations against current Microchip documentation.