Lattice Semiconductor

LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice

MPN: LC4064B-75T44C ✗ סוף ייצור
3.3 V / 2.5 V / 1.8 V Vdss 44-pin TQFP Package 168 MHz Speed Non-volatile Memory
כמות הזמנה מינימלית: 1 |

LC4064B-75T44C סקירה

The Lattice Semiconductor LC4064B-75T44C is a SuperFAST high-density complex programmable logic device with 64 macrocells, a maximum operating frequency of 168 MHz, and a 44-pin TQFP package. It belongs to the ispMACH 4000B family, whose in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V operation for adaptable logic-density and industrial designs. The 44-pin package is supplied in a tray for prototype, automated production, and low-to-medium volume assembly.

A complex programmable logic device, or CPLD, is a programmable digital logic IC that combines multiple sum-of-products logic blocks with a non-volatile configuration memory. A CPLD sits between simple fixed-function gates and FPGAs in the digital-logic hierarchy: it provides faster and more deterministic routing than many FPGAs, retains its configuration after power removal, and offers in-system programmability. The LC4064B-75T44C therefore suits control logic, bus arbitration, state machines, address decoding, interface bridging, and legacy peripheral replacement.

Key characteristics include 64 macrocells, a 168 MHz maximum operating frequency, and compatibility with 3.3 V, 2.5 V, and 1.8 V supply configurations in the 4000B family. The -75 speed designation identifies the 168 MHz performance grade, while T44 identifies the 44-pin TQFP package. The C suffix identifies the commercial temperature option. These distinctions make the complete MPN important when matching an existing design, since changing the speed grade, package, or temperature grade can alter board compatibility, timing, and sourcing requirements.

The ispMACH 4000 architecture blends the structures of the ispLSI 2000 and ispMACH 4A families. Its macrocell-based organization supports combinational and sequential logic, dedicated product-term logic, embedded memory resources, and clocked registers. Designers use the Lattice development environment and isp programmer cables or JT programming methods to create, verify, and download designs. Because the configuration is non-volatile, the device begins operating from its stored logic immediately after power-up without an external configuration PROM.

Typical uses include industrial control panels, data-acquisition modules, legacy peripheral controllers, communication-interface logic, instrumentation, test equipment, and embedded system glue logic. The 44-pin TQFP footprint also makes the device practical for designs that require more I/O than a very small package can offer while avoiding the larger footprint of a 100-pin device.

When planning a layout, assign every pin according to the manufacturer pin-description table and reserve routing space for programming signals, clock inputs, and configuration access. Decoupling requirements, operating-voltage limits, and unused-pin handling should be taken directly from the LC4064B datasheet. Timing closure must be checked against the selected -75 speed grade and the actual system clock rather than inferred only from the family headline frequency.

This page combines the device architecture, package and speed information, drop-in family options, application guidance, comparison parameters, and practical layout considerations in one engineering-focused reference. It also identifies where package, timing, and lifecycle information must be confirmed before an engineering release or production transition.

חלופות תחליף ישיר עבור LC4064B-75T44C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LC4064B-75T44C (אותו גורם צורה וטביעת רגל) — שונים ב Configuration Memory, Package, Product Family.

Lattice Semiconductor
Configuration Memory: Nonvolatile
Package: 44-pin TQFP, 10 x 10 mm
Product Family: ispMACH 4000B
השווה עם LC4064B-75T44C →
Lattice Semiconductor
Configuration Memory: Nonvolatile
Product Family: ispMACH 4000
השווה עם LC4064B-75T44C →

LC4064B-10T44C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 44-pin TQFP
Same LC4064B family and 44-pin TQFP land pattern, but the -10 speed grade replaces the -75 grade and provides less timing performance margin.

📋 חלופה להתייחסות (לא בקטלוג)

LC4064B-25T44C

✅ Drop-In ⚠️ מפרטים לא מאומתים
Lattice Semiconductor
📦 44-pin TQFP
In-System Programmable SuperFAST High-Density PLD · Lattice Semiconductor Corporation · 3.3 V, 2.5 V, and 1.8 V · In-System Programmable · 25 · T44C · CPLD

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LC4064B-75T44I

✅ Drop-In
Lattice Semiconductor
📦 44-pin TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000B · 64 macrocells · 4 logic array blocks · 7.5 ns · 168 MHz · 2.5 V · 1.8 V, 2.5 V, or 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LC4064V-75T44C

✅ Drop-In
Lattice Semiconductor
📦 44-pin TQFP
Complex programmable logic device (CPLD) · ispMACH 4000 · 64 macro cells · 30 I/O · 3.3 V · 1.8 V, 2.5 V, and 3.3 V · 7.5 ns · 168 MHz

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LC4064B-75T44C דירוגים מרביים ומאפיינים חשמליים

Device Type Complex Programmable Logic Device (CPLD)
Device Family ispMACH 4000B
Architecture SuperFAST high-density PLD
Macrocell Count 64 macrocells
Maximum Operating Frequency 168 MHz
Speed Grade -75
Supply Voltage Options 3.3 V / 2.5 V / 1.8 V
Configuration Method In-System Programmable (ISP)
Configuration Memory Non-volatile
מארז 44-pin TQFP
סוג הרכבה Surface Mount
Shipping Format Tray
Temperature Grade Commercial
Logic Resource Organization Macrocell-based

מדריך תצורת פינים של LC4064B-75T44C 44-pin tqfp

תצורת פינים עבור LC4064B-75T44C (מארזת 44-pin tqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 44-pin tqfp עבור LC4064B-75T44C

אין נתוני פריסת פינים מפורטים עבור LC4064B-75T44C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LC4064B-75T44C מתאים עבור 6 יישוםs: Industrial Control and Data-Acquisition Logic, Legacy Peripheral and Bus Interface Bridging, Programmable Counter and Timing Control, Communication Interface and Protocol Control, Test and Measurement Instrumentation, Embedded System Glue Logic and Firmware Support.

🏭

Industrial Control and Data-Acquisition Logic

The LC4064B-75T44C fits compact control modules that combine sensor multiplexing, command decoding, counters, and peripheral interface logic in one programmable device. Its 64 macrocells provide enough logic density for state machines and bus control without moving to a larger FPGA, while non-volatile configuration lets the module begin operating immediately after power-up. The 168 MHz -75 grade supports clocked acquisition and control paths, and the 44-pin TQFP provides a practical balance between I/O access and board size. For extended-temperature installations, evaluate the LC4064B-75T44I industrial option and verify timing against the actual sensor and communication interfaces.

🔧

Legacy Peripheral and Bus Interface Bridging

The LC4064B-75T44C is useful when an older processor must connect to mixed-voltage peripherals, address decoding, or a legacy parallel bus. Programmable macrocells can implement deterministic state machines, chip selects, bus arbitration, and protocol translation while retaining the design in non-volatile memory. The 44-pin package is especially helpful when the upgrade must preserve an existing board outline. Compared with a fixed-function glue-logic implementation, the CPLD allows timing and interface behavior to be revised by reprogramming. Validate every input threshold, output level, and bus timing value against the selected operating voltage and the manufacturer electrical characteristics before releasing the layout.

⏱️

Programmable Counter and Timing Control

Clocked counters, dividers, pulse generators, and sequencers can be implemented in the LC4064B-75T44C when deterministic behavior and compact logic density are priorities. The -75 grade supports a maximum operating frequency of 168 MHz, providing margin for timing-control logic that feeds slower industrial sensors or instrumentation. Non-volatile configuration ensures the timing behavior remains fixed after power cycles without an external PROM. Keep the counter implementation inside the timing constraints of the selected speed grade, and provide proper clock routing and decoupling on the board rather than relying on unsynchronized logic-generated waveforms.

🌐

Communication Interface and Protocol Control

The LC4064B-75T44C can implement protocol framing, command filtering, status encoding, and interface isolation logic around microcontrollers or serial transceivers. Its in-system programmability allows revision without replacing the device, and its non-volatile configuration supports stable behavior across power cycles. The 44-pin TQFP package is appropriate for designs where the logic interface is modest but timing and state-machine density justify a CPLD rather than discrete gates. Verify input thresholds, output drive, and rise/fall times for the specific supply voltage, and keep programming or isolation requirements separate from the functional signal path during PCB layout.

🖥️

Test and Measurement Instrumentation

In test and measurement equipment, the LC4064B-75T44C can implement sequencing, address decoding, sample control, and status aggregation between an instrument controller and analog or mixed-signal front ends. The 168 MHz performance grade accommodates clocked control functions while the 64 macrocells allow multiple control paths to share one package. Non-volatile configuration preserves calibration and sequencing logic without relying on a separate boot PROM. For precision analog measurement systems, keep digital switching and control timing away from sensitive analog routing, and validate the complete design against the actual acquisition rate rather than the CPLD's maximum frequency.

🧩

Embedded System Glue Logic and Firmware Support

The LC4064B-75T44C is appropriate when a microcontroller platform needs offload logic for address decoding, interrupt control, watchdog handling, or peripheral arbitration. Keeping these functions in a dedicated non-volatile CPLD can make system behavior more deterministic and provide a clear hardware partition between firmware and interface logic. The 44-pin TQFP footprint supports a moderate number of signals while avoiding a larger programmable-logic package. Define reset and startup behavior explicitly, account for programming-mode pin requirements in the layout, and use the manufacturer's pin table to ensure that no configuration signal is assigned incorrectly during boot.

What is the LC4064B-75T44C?
The LC4064B-75T44C is a Lattice Semiconductor SuperFAST high-density CPLD with 64 macrocells, a maximum operating frequency of 168 MHz, and a 44-pin TQFP package. It is part of the ispMACH 4000B family, which supports in-system programming and 3.3 V, 2.5 V, or 1.8 V supply configurations. The device is intended for deterministic, non-volatile logic in industrial control, instrumentation, data acquisition, and legacy peripheral designs.
How many macrocells and I/O pins does the LC4064B-75T44C have?
The LC4064B-75T44C contains 64 macrocells and is packaged in a 44-pin TQFP. The macrocell count is confirmed in the Lattice Semiconductor LC4064B technical documentation, while the exact number of user I/O depends on the device configuration and assigned power, ground, clock, and programming pins. Use the manufacturer pin-description table to determine which package pins are usable for the specific design.
What does the -75 speed grade mean for the LC4064B?
The -75 designation identifies the 168 MHz performance grade of the LC4064B family. The LC4064B-75T44C is therefore suited to clocked control logic operating at or below that family's stated maximum frequency, subject to the actual timing paths in the design. Timing closure should be verified in the Lattice development environment with the intended clock, I/O standards, and system constraints rather than based on the headline frequency alone.
Where can I download the LC4064B-75T44C datasheet PDF?
The LC4064B-75T44C datasheet PDF can be reached through the Lattice Semiconductor datasheet listing indexed for this exact part number. It describes the ispMACH 4000B family architecture, macrocell organization, electrical characteristics, pin descriptions, package information, and programming recommendations. Download the document from the manufacturer or its indexed technical mirror and confirm that the device ordering table includes the LC4064B-75T44C configuration.
Where can I find the LC4064B-75T44C pinout?
The LC4064B-75T44C pinout is published in the pin-description and package-outline sections of the Lattice Semiconductor LC4064B datasheet. The device uses a 44-pin TQFP package, and its assignments include power, ground, user I/O, clock inputs, and configuration-programming functions. Use the manufacturer table rather than a generic 44-pin symbol because TQFP packages with different CPLD families can assign the same physical pins to different functions.
Can the LC4064B-75T44C be programmed in circuit?
Yes, the LC4064B-75T44C supports in-system programming because it belongs to the ispMACH 4000B ISP family. Configuration is stored in non-volatile memory, allowing the programmed logic to operate after power-up without an external configuration PROM. Programming can be performed through the manufacturer's supported programmer hardware and software, subject to the voltage, isolation, and pin-access requirements described in the datasheet.
Is the LC4064B-75T44C still active?
The LC4064B-75T44C is a mature CPLD, but its current lifecycle status should be confirmed with Lattice Semiconductor before initiating a new production design. Because it is an older programmable-logic family, availability, last-time-buy arrangements, and long-term supply plans can differ from current FPGA portfolios. Request a formal lifecycle statement and a written supply commitment before approving the part for a long-lived industrial or automotive program.
What can replace the LC4064B-75T44C as a drop-in part?
The closest drop-in choices are other LC4064-family devices in the same 44-pin TQFP land pattern, including LC4064B-10T44C, LC4064B-25T44C, and LC4064B-75T44I. A lower-numbered speed grade generally provides less timing margin, while the -75T44I variant changes the temperature grade. Before substitution, compare the pin table, supply voltage, timing report, and configuration requirements against the original design.
Is LC4064B-75T44C the same as LC4064B-75T44I?
The LC4064B-75T44C and LC4064B-75T44I share the LC4064B architecture, -75 speed grade, 44-pin TQFP package, and principal electrical configuration. The final suffix distinguishes the temperature option: the C version is commercial, while the I version is the industrial option. The industrial-grade part is normally the appropriate choice when the enclosure temperature, power supply tolerance, or production qualification requires industrial temperature operation.
LC4064B-75T44C vs LC4064B-25T44C: which is better for a timing-critical design?
Choose LC4064B-75T44C when the design needs the higher 168 MHz grade and greater timing margin; the LC4064B-25T44C is the lower-speed member of the same 44-pin family. The slower part may suit a design with modest clock rates and can be easier to meet timing on, but selecting it for an interface originally constrained near the upper operating frequency removes performance margin. Confirm the actual timing report before replacing the -75 grade.
When should I choose the LC4064B-75T44C over an LC4064B-10T44C?
Choose LC4064B-75T44C when clock frequency, I/O timing, or design-future margin is more important than using the lowest-speed family member. The -75 grade supports operation up to 168 MHz, whereas the -10 grade is intended for lower-speed applications. Both use the same 44-pin family arrangement, so the selection should be based on the slowest required timing path and the internal clock rate rather than only on nominal operating status.
Is the LC4064B-75T44C suitable for industrial control equipment?
The LC4064B-75T44C can be suitable for industrial control equipment when its commercial temperature grade, supply-voltage limits, and reliability requirements fit the environment. The LC4064B-75T44I is the industrial-temperature option in the same footprint and speed class, making it the more direct choice for extended-temperature operation. Industrial suitability also depends on system-level surge, immunity, isolation, and certification requirements that the CPLD itself does not satisfy.
Where can I buy the LC4064B-75T44C online?
Use the Request a Quote form on this page to request the LC4064B-75T44C, current lead time, minimum order quantity, and authorized supply options. The exact part number should be quoted as LC4064B-75T44C in the commercial-grade 44-pin TQFP configuration. Confirm package, speed grade, and lifecycle conditions in the quotation because similar 4000-family MPNs use different temperature, speed, and package identifiers.
What is the price of the LC4064B-75T44C?
The current commercial price for the LC4064B-75T44C is best obtained through the Request a Quote form on this page. Quote requests can be tied to the required quantity and packaging format, and the response should confirm part authenticity, traceability requirements, lead time, and lifecycle status. Because this is a mature programmed-logic device, exact-match stock, date-code requirements, and programmed-delivery requirements can materially affect the quotation.
What is the lead time for the LC4064B-75T44C?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on factory availability, programmed configuration files, date-code and traceability requirements, and the shipping format required by the assembly process. The manufacturer lifecycle statement should also be reviewed because a legacy CPLD may have a different procurement profile from current active programmable-logic devices.
What are the key specifications of the LC4064B-75T44C that engineers should know?
The essential parameters are 64 macrocells, a 168 MHz maximum operating frequency, a 44-pin TQFP package, in-system programmability, and 3.3 V, 2.5 V, or 1.8 V family supply options. It also uses non-volatile configuration, allowing immediate post-power-up operation without an external PROM. These characteristics place it between simple gate arrays and larger FPGAs for compact, deterministic logic with retained configuration.

נתוני עזר הנדסיים עבור LC4064B-75T44C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Select the LC4064B-75T44C when a compact, deterministic design needs 64 macrocells, non-volatile configuration, and the 168 MHz timing class in a 44-pin TQFP package. It is a practical fit for industrial control glue logic, legacy bus decoding, protocol control, and instrumentation where a larger FPGA would be unnecessary. Use LC4064B-10T44C or LC4064B-25T44C only when the same land pattern is valuable and the slower timing grade still meets the design with adequate margin. Use LC4064B-75T44I for extended-temperature industrial operation because it retains the -75 speed grade and package while changing the temperature option. Consider LC4064V-75T44C when the 2.5 V-oriented configuration is electrically appropriate, but verify supply requirements and pin-level compatibility. For any substitution, rerun timing analysis, confirm the package drawing, and check the current lifecycle and supply status.

השוואה עם חלופות

פרמטר מוצר זה LC4064B-10T44C LC4064B-25T44C LC4064B-75T44I LC4064V-75T44C
Package 44-pin TQFP 44-pin TQFP - same 44-pin TQFP - same 44-pin TQFP - same 44-pin TQFP - same
Brand Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation
Device Family ispMACH 4000B ispMACH 4000B ispMACH 4000B ispMACH 4000B ispMACH 4000 family
Macrocell Count 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells
Speed Grade -75 -10 -25 -75 -75
Temperature Option Commercial Commercial Commercial Industrial Commercial
Supply Voltage Configuration 3.3 V / 2.5 V / 1.8 V family support 3.3 V / 2.5 V / 1.8 V family support 3.3 V / 2.5 V / 1.8 V family support 3.3 V / 2.5 V / 1.8 V family support 2.5 V configuration
Configuration Method In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable
Configuration Memory Non-volatile Non-volatile Non-volatile Non-volatile Non-volatile

מבדילים עיקריים

  • Higher timing grade within the same land pattern (לעומתLC4064B-25T44C)
  • Commercial-to-industrial transition without changing the footprint (לעומתLC4064B-75T44C)
  • Broader family supply-voltage configuration (לעומתLC4064V-75T44C)
  • Compact logic density in a 44-pin package (לעומתLC4064B-10T44C)

הערות תכנון

Assign the PCB footprint from the manufacturer package drawing for the 44-pin TQFP rather than from a generic TQFP library. In particular, verify the exposed or thermal pad arrangement if the selected family drawing includes one, the pin-1 orientation, and the programmed pin assignments. Configuration-programming signals should remain accessible for production programming, and clock inputs should be routed away from high-edge-rate programming or switching nodes.

Select the supply voltage only after checking every input threshold, output level, and internal operating requirement for the 4000B configuration being used. Place the required bypass capacitors at the device power pins with short, low-inductance connections, and route the ground return directly into the device ground-pad region. Avoid sharing a narrow return path between the CPLD and switching or high-current peripherals, because ground bounce can corrupt clock edges and configuration behavior.

Do not substitute a different speed or temperature suffix without checking timing and environmental requirements. A -10 or -25 grade keeps the same family package but can remove timing margin relative to the -75 part, while the -75T44I changes the temperature grade. The LC4064V-75T44C also requires careful supply-voltage review because the V suffix identifies a different voltage configuration. Re-run synthesis, place-and-route, and static timing analysis for every substitution.

Treat clock inputs as dedicated high-quality nets and avoid deriving them through long combinational logic near the clock pins. Use the fastest available clock-routing resources in the design tools, keep external clock drivers close to the device where practical, and check hold and setup requirements with real output and input delays. For slow legacy buses, use registered outputs only where the interface timing permits them so that added pipeline latency does not violate the external protocol.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive environmental or automotive-qualification statement was located for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status in the manufacturer declaration or the documentation associated with the production lot.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LC4064B-75T44C datasheet LC4064B-75T44C pinout LC4064B-75T44C datasheet pdf LC4064B-75T44C specifications LC4064B-75T44C price LC4064B-75T44C stock LC4064B-75T44C equivalent LC4064B-75T44C replacement LC4064B-75T44C vs LC4064B-75T44I Lattice LC4064B-75T44C LC4064B 44 pin TQFP CPLD LC4064B industrial control logic LC4064B legacy bus interface LC4064B in-system programming

רכיבים ומונחים קשורים

Lattice Semiconductor Corporation LC4064B-75T44C LC4064B-10T44C LC4064B-25T44C LC4064B-75T44I LC4064V-75T44C ispMACH 4000B ispMACH 4000 ispLSI 2000 ispMACH 4A CPLD complex programmable logic device FPGA programmable logic macrocell SuperFAST architecture in-system programming ISP non-volatile configuration memory 168 MHz 64 macrocells 44-pin TQFP surface mount industrial control bus decoding protocol control instrumentation RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר