LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice
부품 번호: LC4064B-75T44C ✗ 단종LC4064B-75T44C 개요
A complex programmable logic device, or CPLD, is a programmable digital logic IC that combines multiple sum-of-products logic blocks with a non-volatile configuration memory. A CPLD sits between simple fixed-function gates and FPGAs in the digital-logic hierarchy: it provides faster and more deterministic routing than many FPGAs, retains its configuration after power removal, and offers in-system programmability. The LC4064B-75T44C therefore suits control logic, bus arbitration, state machines, address decoding, interface bridging, and legacy peripheral replacement.
Key characteristics include 64 macrocells, a 168 MHz maximum operating frequency, and compatibility with 3.3 V, 2.5 V, and 1.8 V supply configurations in the 4000B family. The -75 speed designation identifies the 168 MHz performance grade, while T44 identifies the 44-pin TQFP package. The C suffix identifies the commercial temperature option. These distinctions make the complete MPN important when matching an existing design, since changing the speed grade, package, or temperature grade can alter board compatibility, timing, and sourcing requirements.
The ispMACH 4000 architecture blends the structures of the ispLSI 2000 and ispMACH 4A families. Its macrocell-based organization supports combinational and sequential logic, dedicated product-term logic, embedded memory resources, and clocked registers. Designers use the Lattice development environment and isp programmer cables or JT programming methods to create, verify, and download designs. Because the configuration is non-volatile, the device begins operating from its stored logic immediately after power-up without an external configuration PROM.
Typical uses include industrial control panels, data-acquisition modules, legacy peripheral controllers, communication-interface logic, instrumentation, test equipment, and embedded system glue logic. The 44-pin TQFP footprint also makes the device practical for designs that require more I/O than a very small package can offer while avoiding the larger footprint of a 100-pin device.
When planning a layout, assign every pin according to the manufacturer pin-description table and reserve routing space for programming signals, clock inputs, and configuration access. Decoupling requirements, operating-voltage limits, and unused-pin handling should be taken directly from the LC4064B datasheet. Timing closure must be checked against the selected -75 speed grade and the actual system clock rather than inferred only from the family headline frequency.
This page combines the device architecture, package and speed information, drop-in family options, application guidance, comparison parameters, and practical layout considerations in one engineering-focused reference. It also identifies where package, timing, and lifecycle information must be confirmed before an engineering release or production transition.
드롭인 대체품: LC4064B-75T44C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4064B-75T44C (동일 폼 팩터 및 풋프린트) — 차이점: Configuration Memory, Package, Product Family.
LC4064B-10T44C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LC4064B-25T44C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LC4064B-75T44I
✅ 드롭인가격 문의
데이터시트 보기 →LC4064V-75T44C
✅ 드롭인가격 문의
데이터시트 보기 →LC4064B-75T44C 최대 정격 & 전기적 특성
| Device Type | Complex Programmable Logic Device (CPLD) |
| Device Family | ispMACH 4000B |
| Architecture | SuperFAST high-density PLD |
| Macrocell Count | 64 macrocells |
| Maximum Operating Frequency | 168 MHz |
| Speed Grade | -75 |
| Supply Voltage Options | 3.3 V / 2.5 V / 1.8 V |
| Configuration Method | In-System Programmable (ISP) |
| Configuration Memory | Non-volatile |
| 패키지 | 44-pin TQFP |
| 실장 유형 | Surface Mount |
| Shipping Format | Tray |
| Temperature Grade | Commercial |
| Logic Resource Organization | Macrocell-based |
LC4064B-75T44C 44-pin tqfp 핀 구성 가이드
LC4064B-75T44C(44-pin tqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4064B-75T44C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4064B-75T44C 적합 용도: 6 애플리케이션s: Industrial Control and Data-Acquisition Logic, Legacy Peripheral and Bus Interface Bridging, Programmable Counter and Timing Control, Communication Interface and Protocol Control, Test and Measurement Instrumentation, Embedded System Glue Logic and Firmware Support.
Industrial Control and Data-Acquisition Logic
The LC4064B-75T44C fits compact control modules that combine sensor multiplexing, command decoding, counters, and peripheral interface logic in one programmable device. Its 64 macrocells provide enough logic density for state machines and bus control without moving to a larger FPGA, while non-volatile configuration lets the module begin operating immediately after power-up. The 168 MHz -75 grade supports clocked acquisition and control paths, and the 44-pin TQFP provides a practical balance between I/O access and board size. For extended-temperature installations, evaluate the LC4064B-75T44I industrial option and verify timing against the actual sensor and communication interfaces.
추천
Legacy Peripheral and Bus Interface Bridging
The LC4064B-75T44C is useful when an older processor must connect to mixed-voltage peripherals, address decoding, or a legacy parallel bus. Programmable macrocells can implement deterministic state machines, chip selects, bus arbitration, and protocol translation while retaining the design in non-volatile memory. The 44-pin package is especially helpful when the upgrade must preserve an existing board outline. Compared with a fixed-function glue-logic implementation, the CPLD allows timing and interface behavior to be revised by reprogramming. Validate every input threshold, output level, and bus timing value against the selected operating voltage and the manufacturer electrical characteristics before releasing the layout.
추천
Programmable Counter and Timing Control
Clocked counters, dividers, pulse generators, and sequencers can be implemented in the LC4064B-75T44C when deterministic behavior and compact logic density are priorities. The -75 grade supports a maximum operating frequency of 168 MHz, providing margin for timing-control logic that feeds slower industrial sensors or instrumentation. Non-volatile configuration ensures the timing behavior remains fixed after power cycles without an external PROM. Keep the counter implementation inside the timing constraints of the selected speed grade, and provide proper clock routing and decoupling on the board rather than relying on unsynchronized logic-generated waveforms.
추천
Communication Interface and Protocol Control
The LC4064B-75T44C can implement protocol framing, command filtering, status encoding, and interface isolation logic around microcontrollers or serial transceivers. Its in-system programmability allows revision without replacing the device, and its non-volatile configuration supports stable behavior across power cycles. The 44-pin TQFP package is appropriate for designs where the logic interface is modest but timing and state-machine density justify a CPLD rather than discrete gates. Verify input thresholds, output drive, and rise/fall times for the specific supply voltage, and keep programming or isolation requirements separate from the functional signal path during PCB layout.
추천
Test and Measurement Instrumentation
In test and measurement equipment, the LC4064B-75T44C can implement sequencing, address decoding, sample control, and status aggregation between an instrument controller and analog or mixed-signal front ends. The 168 MHz performance grade accommodates clocked control functions while the 64 macrocells allow multiple control paths to share one package. Non-volatile configuration preserves calibration and sequencing logic without relying on a separate boot PROM. For precision analog measurement systems, keep digital switching and control timing away from sensitive analog routing, and validate the complete design against the actual acquisition rate rather than the CPLD's maximum frequency.
추천
Embedded System Glue Logic and Firmware Support
The LC4064B-75T44C is appropriate when a microcontroller platform needs offload logic for address decoding, interrupt control, watchdog handling, or peripheral arbitration. Keeping these functions in a dedicated non-volatile CPLD can make system behavior more deterministic and provide a clear hardware partition between firmware and interface logic. The 44-pin TQFP footprint supports a moderate number of signals while avoiding a larger programmable-logic package. Define reset and startup behavior explicitly, account for programming-mode pin requirements in the layout, and use the manufacturer's pin table to ensure that no configuration signal is assigned incorrectly during boot.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4064B-75T44C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4064B-10T44C | LC4064B-25T44C | LC4064B-75T44I | LC4064V-75T44C |
|---|---|---|---|---|---|
| Package | 44-pin TQFP | 44-pin TQFP - same | 44-pin TQFP - same | 44-pin TQFP - same | 44-pin TQFP - same |
| Brand | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation |
| Device Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000 family |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| Speed Grade | -75 | -10 | -25 | -75 | -75 |
| Temperature Option | Commercial | Commercial | Commercial | Industrial | Commercial |
| Supply Voltage Configuration | 3.3 V / 2.5 V / 1.8 V family support | 3.3 V / 2.5 V / 1.8 V family support | 3.3 V / 2.5 V / 1.8 V family support | 3.3 V / 2.5 V / 1.8 V family support | 2.5 V configuration |
| Configuration Method | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
| Configuration Memory | Non-volatile | Non-volatile | Non-volatile | Non-volatile | Non-volatile |
주요 차별점
- Higher timing grade within the same land pattern (vs LC4064B-25T44C)
- Commercial-to-industrial transition without changing the footprint (vs LC4064B-75T44C)
- Broader family supply-voltage configuration (vs LC4064V-75T44C)
- Compact logic density in a 44-pin package (vs LC4064B-10T44C)
설계 노트
Assign the PCB footprint from the manufacturer package drawing for the 44-pin TQFP rather than from a generic TQFP library. In particular, verify the exposed or thermal pad arrangement if the selected family drawing includes one, the pin-1 orientation, and the programmed pin assignments. Configuration-programming signals should remain accessible for production programming, and clock inputs should be routed away from high-edge-rate programming or switching nodes.
Select the supply voltage only after checking every input threshold, output level, and internal operating requirement for the 4000B configuration being used. Place the required bypass capacitors at the device power pins with short, low-inductance connections, and route the ground return directly into the device ground-pad region. Avoid sharing a narrow return path between the CPLD and switching or high-current peripherals, because ground bounce can corrupt clock edges and configuration behavior.
Do not substitute a different speed or temperature suffix without checking timing and environmental requirements. A -10 or -25 grade keeps the same family package but can remove timing margin relative to the -75 part, while the -75T44I changes the temperature grade. The LC4064V-75T44C also requires careful supply-voltage review because the V suffix identifies a different voltage configuration. Re-run synthesis, place-and-route, and static timing analysis for every substitution.
Treat clock inputs as dedicated high-quality nets and avoid deriving them through long combinational logic near the clock pins. Use the fastest available clock-routing resources in the design tools, keep external clock drivers close to the device where practical, and check hold and setup requirements with real output and input delays. For slow legacy buses, use registered outputs only where the interface timing permits them so that added pipeline latency does not violate the external protocol.
규정 준수 정보
No definitive environmental or automotive-qualification statement was located for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status in the manufacturer declaration or the documentation associated with the production lot.