LFE2-50E-6F672C - 48K LUT 500-I/O ECP2 FPGA | Lattice
MPN: LFE2-50E-6F672C ✓ פעילLFE2-50E-6F672C סקירה
An FPGA is a programmable semiconductor categorized as a digital logic IC and a programmable logic device. By storing configuration data in on-chip memory, an FPGA can implement combinational and sequential logic after manufacture. Within the system hierarchy, the LFE2-50E-6F672C belongs to the ECP2 family of low-power FPGAs, combining configurable logic blocks, block RAM, programmable I/O, and DSP resources in one device.
The device provides 48,000 logic elements and 500 programmable I/O pins, allowing multiple external interfaces to be assigned as required by the design. Its 396,288 bits of RAM support buffering, data tables, packet storage, and general-purpose state. The -6 speed designation identifies the device performance grade, while the 1.2 V core voltage indicates the principal internal supply used by the ECP2 logic core.
Built using 90 nm FPGA technology, the LFE2-50E-6F672C integrates advanced DSP blocks for arithmetic and signal-processing workloads. The 672-ball BGA package offers a high pin count for demanding interface-rich designs, but it also requires a multilayer PCB with fine-pitch escape routing, careful ground distribution, and process-controlled assembly. The exact pin names and electrical limits should be assigned from the manufacturer pin-description table before layout release.
Typical applications include industrial control and factory automation, communication interfaces, instrumentation, embedded video or display control, and general-purpose digital signal processing. It is also suitable for prototype systems that require parallel data collection, protocol conversion, or deterministic control where multiple programmable interface channels and on-chip logic are more useful than a fixed application-specific controller.
The primary design trade-off is routing complexity. A 672-ball BGA offers substantial connectivity but demands accurate ball maps, via-in-pad or fan-out strategies, plane continuity, and assembly yield controls. Confirm power, clock, configuration, and I/O requirements against the manufacturer datasheet, and prototype the BGA footprint before committing a production board to the 672-ball package.
This page organizes the core ECP2 specifications, verified source links, drop-in replacement constraints, package considerations, and practical application guidance into an engineering-focused resource for FPGA selection and PCB planning.
חלופות תחליף ישיר עבור LFE2-50E-6F672C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LFE2-50E-6F672C (אותו גורם צורה וטביעת רגל) — שונים ב Speed Grade, DSP Support, Device Type, Package Type, Logic Elements.
LFE2-50E-6FN672C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LFE2-50SE-6FN672I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LFE2-50E-5F672C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←LFE2-50E-7F672C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←LFE2-50E-6F672I
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←LFE2-50E-6F672C דירוגים מרביים ומאפיינים חשמליים
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Elements | 48,000 logic elements |
| Look-Up Tables | 48K LUTs |
| Programmable I/O | 500 I/O |
| On-Chip RAM | 396,288 bits |
| Core Voltage | 1.2 V |
| Speed Grade | -6 speed grade |
| DSP Support | DSP blocks |
| Process Technology | 90 nm |
| Package Type | 672-ball BGA |
| Terminal Count | 672 balls |
| Package Shape | Square |
| Terminal Form | Ball |
| Shipping Package | Tray |
מדריך תצורת פינים של LFE2-50E-6F672C tray
תצורת פינים עבור LFE2-50E-6F672C (מארזת tray). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור LFE2-50E-6F672C.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LFE2-50E-6F672C מתאים עבור 6 יישוםs: Industrial Factory Automation, Communication and Protocol Conversion, Data Acquisition and Instrumentation, Video and Display Control, Embedded DSP and Signal Processing, Programmable Logic Prototyping.
Industrial Factory Automation
The LFE2-50E-6F672C fits factory automation because 48,000 logic elements can implement deterministic sequencing and machine-control logic while 500 programmable I/O connect sensors, actuators, encoders, and field buses. Its 396,288 RAM bits provide local buffering for data acquisition and protocol state. The 1.2 V core and -6 speed grade support compact high-performance control, although the exact temperature range must be checked for harsh production environments. A same-package ECP2 variant may simplify inventory consolidation, but pin mapping, timing, and qualification must remain unchanged across the selected device.
מומלץ
Communication and Protocol Conversion
The LFE2-50E-6F672C is suitable for communication-interface consolidation because 500 programmable I/O can support parallel buses, control signals, and multiple data paths in one programmable device. Its 48,000 logic elements support framing, state machines, buffering, and protocol adaptation, while 396,288 RAM bits can hold packet descriptors and receive queues. The 672-ball package provides extensive connectivity, but engineers must implement clocking, I/O standards, and timing constraints explicitly. The -6 grade supplies additional timing margin compared with a -5 candidate when interfaces operate at higher frequencies.
מומלץ
Data Acquisition and Instrumentation
The LFE2-50E-6F672C can implement acquisition timing, channel control, filtering, and data formatting in a compact instrument. Its 500 programmable I/O provide parallel connections to sensors, converters, memory, and calibration networks, while 396,288 RAM bits support sample buffering. The 48,000 logic elements leave room for digital signal processing and control logic without relying on a separate FPGA. For precision analog measurement systems, separate analog and digital grounding into the BGA power distribution network, and validate the exact I/O and supply requirements against the manufacturer documentation.
מומלץ
Video and Display Control
The LFE2-50E-6F672C can consolidate display timing, pixel-format handling, interface bridging, and control functions because it combines 48,000 logic elements with 500 programmable I/O. On-chip RAM can hold lookup data, line buffers, or control tables for selected display paths, while DSP resources can assist filtering and arithmetic. The 672-ball BGA offers enough connectivity for multi-interface systems but demands careful high-speed routing and display-clock routing. A -5 device may be acceptable for slower interfaces, while the -6 grade provides more margin for demanding pixel-clock timing.
מומלץ
Embedded DSP and Signal Processing
The LFE2-50E-6F672C is appropriate for fixed-function signal processing that benefits from parallel programmable logic, including filtering, waveform generation, and digital correction. Its DSP blocks handle arithmetic-intensive operations, while 48,000 logic elements support control, sequencing, and interface logic. The 396,288 RAM bits can hold coefficients and working data, reducing dependence on external memory for moderate workloads. Clocking strategy is critical because DSP chains can become timing-critical; use the -6 device when clock headroom is limited, and evaluate a -7 variant only when its power and thermal effects suit the enclosure.
מומלץ
Programmable Logic Prototyping
The LFE2-50E-6F672C is useful for prototyping fixed-function ASIC logic because it combines 48,000 logic elements, 500 I/O, RAM, and DSP resources in one reconfigurable package. Engineers can implement control blocks, interface bridges, test algorithms, and parallel datapaths without fabricating a custom ASIC. Its -6 speed grade supports meaningful timing analysis during development. For production transfers, verify pin assignments, supported I/O standards, clock architecture, and power budgets before treating the prototype behavior as final. A 672-ball BGA prototype board also exposes the assembly complexity expected in the end product.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LFE2-50E-6F672C — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LFE2-50E-6FN672C | LFE2-50SE-6FN672I | LFE2-50E-5F672C | LFE2-50E-7F672C | LFE2-50E-6F672I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-ball BGA | 672-ball BGA | 672-ball BGA | 672-ball BGA | 672-ball BGA | 672-ball BGA |
| Device Family | ECP2 | ECP2 | ECP2 SE | ECP2 | ECP2 | ECP2 |
| Logic Elements | 48,000 logic elements | 48K LUT class | Approximately 50K LUTs | 48K LUT class | 48K LUT class | 48K LUT class |
| Speed Grade | -6 | -6 | -6 | -5 | -7 | -6 |
מבדילים עיקריים
- Balanced logic and interface resources (לעומתLFE2-50SE-6FN672I)
- Established -6 performance grade (לעומתLFE2-50E-5F672C)
- Lower-latency timing option (לעומתLFE2-50E-7F672C)
- Directly documented near-order code (לעומתLFE2-50E-6F672I)
הערות תכנון
Design the 672-ball BGA escape layer from the manufacturer package drawing rather than estimating pitch or ball-map details. Preserve uninterrupted reference planes beneath the device, provide symmetric decoupling paths to the 1.2 V core, and account for assembly access, board warpage, and the BGA attach process. A prototype assembly should verify impedance, solder-joint reliability, and programming behavior before the layout is used for production quantities.
Use the manufacturer power-supply and decoupling recommendations for the ECP2 core and user I/O rails. Place the smallest suitable high-frequency bypass capacitors adjacent to their assigned BGA power balls, then add bulk capacitance near the regulator or supply entry point. Separate noisy switching supplies from sensitive FPGA rails where practical, and verify startup sequencing and configuration behavior when the board contains multiple voltage domains.
Treat configuration, clock, and high-speed user interfaces as separate layout concerns. Route clocks over continuous reference planes with matched return paths, keep configuration pins away from aggressive switching nodes, and apply the device's supported I/O standards to each external interface. Because the 672-ball package limits direct escape options, plan via transitions and signal-layer transitions early; changes to the ball map can otherwise create routing congestion around the device.
Do not assume that an LFE2-50E order code with a different speed, device-type, package, or temperature suffix is automatically interchangeable. Compare the manufacturer device table, ball map, supported I/O, electrical limits, configuration method, and temperature grade. In particular, validate the -5 and -7 alternatives with post-route timing analysis and validate the SE or industrial-marked candidates against every original requirement before approving a drop-in change.
מידע על תאימות
The technical product records do not establish material-compliance or automotive-qualification declarations. AEC-Q100 is recorded as not applicable because this exact order code is not identified as an automotive-qualified variant; an I-marked alternative is not automatically AEC-Q100 qualified.