Lattice Semiconductor

LFE2-50E-6F672C - 48K LUT 500-I/O ECP2 FPGA | Lattice

MPN: LFE2-50E-6F672C ✓ 啟用中
1.2 V Vdss 672-ball BGA Package -6 speed grade Speed
MOQ: 1 |

LFE2-50E-6F672C 概覽

Lattice Semiconductor LFE2-50E-6F672C is an ECP2 field-programmable gate array with 48,000 logic elements, 500 programmable I/O, 396,288 RAM bits, and a 1.2 V core voltage in a 672-ball BGA package. It is positioned for embedded systems requiring programmable logic, parallel interfaces, control functions, and dedicated DSP operations without a mask change.

An FPGA is a programmable semiconductor categorized as a digital logic IC and a programmable logic device. By storing configuration data in on-chip memory, an FPGA can implement combinational and sequential logic after manufacture. Within the system hierarchy, the LFE2-50E-6F672C belongs to the ECP2 family of low-power FPGAs, combining configurable logic blocks, block RAM, programmable I/O, and DSP resources in one device.

The device provides 48,000 logic elements and 500 programmable I/O pins, allowing multiple external interfaces to be assigned as required by the design. Its 396,288 bits of RAM support buffering, data tables, packet storage, and general-purpose state. The -6 speed designation identifies the device performance grade, while the 1.2 V core voltage indicates the principal internal supply used by the ECP2 logic core.

Built using 90 nm FPGA technology, the LFE2-50E-6F672C integrates advanced DSP blocks for arithmetic and signal-processing workloads. The 672-ball BGA package offers a high pin count for demanding interface-rich designs, but it also requires a multilayer PCB with fine-pitch escape routing, careful ground distribution, and process-controlled assembly. The exact pin names and electrical limits should be assigned from the manufacturer pin-description table before layout release.

Typical applications include industrial control and factory automation, communication interfaces, instrumentation, embedded video or display control, and general-purpose digital signal processing. It is also suitable for prototype systems that require parallel data collection, protocol conversion, or deterministic control where multiple programmable interface channels and on-chip logic are more useful than a fixed application-specific controller.

The primary design trade-off is routing complexity. A 672-ball BGA offers substantial connectivity but demands accurate ball maps, via-in-pad or fan-out strategies, plane continuity, and assembly yield controls. Confirm power, clock, configuration, and I/O requirements against the manufacturer datasheet, and prototype the BGA footprint before committing a production board to the 672-ball package.

This page organizes the core ECP2 specifications, verified source links, drop-in replacement constraints, package considerations, and practical application guidance into an engineering-focused resource for FPGA selection and PCB planning.

直接替換替代品,適用於 LFE2-50E-6F672C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LFE2-50E-6F672C (相同外形與佔位) — 差異在於 Speed Grade, DSP Support, Device Type, Package Type, Logic Elements.

Lattice Semiconductor
Speed Grade: -5
DSP Support: DSP resources supported
Device Type: ECP2 Field-Programmable Gate Array
比較對象 LFE2-50E-6F672C →
Lattice Semiconductor
Speed Grade: -6
Device Type: ECP2 Field-Programmable Gate Array (FPGA)
Logic Elements: 48,000
比較對象 LFE2-50E-6F672C →
Lattice Semiconductor
Speed Grade: -7 speed grade
DSP Support: DSP
Package Type: Fine-pitch ball grid array (FPBGA)
比較對象 LFE2-50E-6F672C →

LFE2-50E-6FN672C

✅ 直接替換
📦 672-ball BGA
Retains the 48K-LUT ECP2 resource level and -6 speed grade; the N-marked ordering code requires confirmation of any package or commercial-grade differences

📋 參考替代品(不在目錄中)

LFE2-50SE-6FN672I

✅ 直接替換
📦 672-ball BGA
Approximately 50K LUTs versus 48K LUTs, a 4.2% increase, with an industrial temperature suffix and a different ECP2 SE device type

📋 參考替代品(不在目錄中)

LFE2-50E-5F672C

✅ 直接替換 ⚠️ 規格未經驗證
Lattice Semiconductor
📦 672-ball BGA
ECP2 Field-Programmable Gate Array · 48,000 LUTs · 50,000 cells · 500 I/O · 1.2 V · -5 · 357 MHz · 90 nm CMOS

聯絡詢價

查看資料表 →

LFE2-50E-7F672C

✅ 直接替換 ⚠️ 規格未經驗證
Lattice Semiconductor
📦 672-ball BGA
ECP2 field-programmable gate array (FPGA) · 48,000 logic elements · 500 user I/Os · 396,288 bits · 1.2 V · -7 speed grade · 672-FPBGA, 27 mm x 27 mm · Surface mount

聯絡詢價

查看資料表 →

LFE2-50E-6F672I

✅ 直接替換 ⚠️ 規格未經驗證
Lattice Semiconductor
📦 672-ball BGA
ECP2 Field-Programmable Gate Array (FPGA) · 48,000 · 6,000 · 396,288 bits · 500 pins · 672-FPBGA · 1.2 V · -6

聯絡詢價

查看資料表 →

LFE2-50E-6F672C 最大額定值與電氣特性

Device Type ECP2 Field Programmable Gate Array (FPGA)
Logic Elements 48,000 logic elements
Look-Up Tables 48K LUTs
Programmable I/O 500 I/O
On-Chip RAM 396,288 bits
Core Voltage 1.2 V
Speed Grade -6 speed grade
DSP Support DSP blocks
Process Technology 90 nm
Package Type 672-ball BGA
Terminal Count 672 balls
Package Shape Square
Terminal Form Ball
Shipping Package Tray

LFE2-50E-6F672C tray 腳位配置指南

LFE2-50E-6F672C(tray 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LFE2-50E-6F672C 的 tray 封裝腳位圖

無詳細腳位定義資料: LFE2-50E-6F672C.

請參閱 資料表 以查看完整腳位配置。

典型應用

LFE2-50E-6F672C 適用於 6 應用s: Industrial Factory Automation, Communication and Protocol Conversion, Data Acquisition and Instrumentation, Video and Display Control, Embedded DSP and Signal Processing, Programmable Logic Prototyping.

🏭

Industrial Factory Automation

The LFE2-50E-6F672C fits factory automation because 48,000 logic elements can implement deterministic sequencing and machine-control logic while 500 programmable I/O connect sensors, actuators, encoders, and field buses. Its 396,288 RAM bits provide local buffering for data acquisition and protocol state. The 1.2 V core and -6 speed grade support compact high-performance control, although the exact temperature range must be checked for harsh production environments. A same-package ECP2 variant may simplify inventory consolidation, but pin mapping, timing, and qualification must remain unchanged across the selected device.

🌐

Communication and Protocol Conversion

The LFE2-50E-6F672C is suitable for communication-interface consolidation because 500 programmable I/O can support parallel buses, control signals, and multiple data paths in one programmable device. Its 48,000 logic elements support framing, state machines, buffering, and protocol adaptation, while 396,288 RAM bits can hold packet descriptors and receive queues. The 672-ball package provides extensive connectivity, but engineers must implement clocking, I/O standards, and timing constraints explicitly. The -6 grade supplies additional timing margin compared with a -5 candidate when interfaces operate at higher frequencies.

🔧

Data Acquisition and Instrumentation

The LFE2-50E-6F672C can implement acquisition timing, channel control, filtering, and data formatting in a compact instrument. Its 500 programmable I/O provide parallel connections to sensors, converters, memory, and calibration networks, while 396,288 RAM bits support sample buffering. The 48,000 logic elements leave room for digital signal processing and control logic without relying on a separate FPGA. For precision analog measurement systems, separate analog and digital grounding into the BGA power distribution network, and validate the exact I/O and supply requirements against the manufacturer documentation.

📺

Video and Display Control

The LFE2-50E-6F672C can consolidate display timing, pixel-format handling, interface bridging, and control functions because it combines 48,000 logic elements with 500 programmable I/O. On-chip RAM can hold lookup data, line buffers, or control tables for selected display paths, while DSP resources can assist filtering and arithmetic. The 672-ball BGA offers enough connectivity for multi-interface systems but demands careful high-speed routing and display-clock routing. A -5 device may be acceptable for slower interfaces, while the -6 grade provides more margin for demanding pixel-clock timing.

⚡

Embedded DSP and Signal Processing

The LFE2-50E-6F672C is appropriate for fixed-function signal processing that benefits from parallel programmable logic, including filtering, waveform generation, and digital correction. Its DSP blocks handle arithmetic-intensive operations, while 48,000 logic elements support control, sequencing, and interface logic. The 396,288 RAM bits can hold coefficients and working data, reducing dependence on external memory for moderate workloads. Clocking strategy is critical because DSP chains can become timing-critical; use the -6 device when clock headroom is limited, and evaluate a -7 variant only when its power and thermal effects suit the enclosure.

🖥️

Programmable Logic Prototyping

The LFE2-50E-6F672C is useful for prototyping fixed-function ASIC logic because it combines 48,000 logic elements, 500 I/O, RAM, and DSP resources in one reconfigurable package. Engineers can implement control blocks, interface bridges, test algorithms, and parallel datapaths without fabricating a custom ASIC. Its -6 speed grade supports meaningful timing analysis during development. For production transfers, verify pin assignments, supported I/O standards, clock architecture, and power budgets before treating the prototype behavior as final. A 672-ball BGA prototype board also exposes the assembly complexity expected in the end product.

推薦產品摘要

LFE2-50E-6FN672C Same-family 672-ball ECP2 candidate for factory control 用於: Industrial Factory Automation, Data Acquisition and Instrumentation, Embedded DSP and Signal Processing LFE2-50SE-6FN672I Industrial-marked 672-ball ECP2 candidate for qualification review 用於: Industrial Factory Automation, Embedded DSP and Signal Processing LFE2-50E-7F672C Lattice Semiconductor 用於: Communication and Protocol Conversion, Video and Display Control, Programmable Logic Prototyping LFE2-50E-5F672C Lattice Semiconductor 用於: Communication and Protocol Conversion, Video and Display Control, Programmable Logic Prototyping LFE2-50E-6F672I Lattice Semiconductor 用於: Data Acquisition and Instrumentation
What are the key specifications of LFE2-50E-6F672C that engineers should know?
The LFE2-50E-6F672C combines 48,000 logic elements, 48K LUTs, 396,288 bits of RAM, and 500 programmable I/O in a 672-ball BGA package. According to the Lattice Semiconductor manufacturer datasheet and product listings, the device operates from a 1.2 V core using 90 nm FPGA technology and is offered in the -6 speed grade. It also includes DSP resources for arithmetic and signal-processing functions. These figures make it suitable for interface-rich industrial, communications, instrumentation, control, and embedded signal-processing designs.
Where can I download the LFE2-50E-6F672C datasheet PDF?
The LFE2-50E-6F672C datasheet PDF can be reached through the October page linked on this product page and through the Lattice Semiconductor ECP2 documentation. According to the Lattice Semiconductor manufacturer datasheet, the document describes the ECP2 family architecture, device tables, electrical characteristics, configuration methods, pin descriptions, package information, and application guidance. Use the 672-ball package section and pinout tables for PCB design, and confirm all voltage, current, and timing limits against the latest manufacturer revision before fabrication.
Where can I find the LFE2-50E-6F672C pinout and 672-BBGA footprint?
The LFE2-50E-6F672C pinout is found in the pin-description and package tables of the Lattice Semiconductor manufacturer datasheet. The device uses 672 BGA balls in a square package, and the manufacturer documentation also identifies the associated 672-FBGA footprint for board design. Because the package is not represented by a complete pin-by-pin diagram here, use the manufacturer ball-map table to define every power, ground, configuration, clock, and user I/O assignment before releasing the PCB netlist and gerber files.
What can replace the LFE2-50E-6F672C on the same PCB footprint?
The closest documented drop-in candidate is the Lattice Semiconductor LFE2-50E-6FN672C, which uses the 672-ball package and preserves the -6 speed grade. The LFE2-50SE-6FN672I is another same-family 672-ball candidate with approximately 50K LUTs, but its industrial temperature marking and SE device type must be checked against the original requirements. No cross-brand drop-in replacement was established. Confirm pinout, voltage, timing, configuration, and temperature requirements before approving any substitution.
Is LFE2-50E-6F672C the same as LFE2-50E-6FN672C?
The LFE2-50E-6F672C and LFE2-50E-6FN672C are closely related Lattice ECP2 devices in the same 672-ball package and -6 speed class. The N-marked ordering code appears in direct product records, but the manufacturer ordering information should be used to determine whether it changes package construction, temperature grade, or another commercial attribute. For a production replacement, compare the manufacturer device tables, pin descriptions, electrical limits, and qualification markings rather than relying only on the shortened order codes.
What is the best Lattice Semiconductor equivalent for LFE2-50E-6F672C?
The best documented Lattice Semiconductor equivalent is the LFE2-50E-6FN672C because it retains the ECP2 architecture, 48K-LUT-class resource level, -6 speed designation, and 672-ball package. A speed-grade alternative such as LFE2-50E-5F672C or LFE2-50E-7F672C may fit electrically, but timing closure and system performance can change with the speed grade. The LFE2-50SE-6FN672I offers a larger device variant with an industrial marking, so verify temperature, pin, and application requirements before substitution.
LFE2-50E-6F672C vs LFE2-50SE-6FN672I - which is better for industrial control?
The LFE2-50E-6F672C is preferable when the design is already qualified around the 48K-LUT ECP2 device and its documented timing and temperature limits. The LFE2-50SE-6FN672I is a stronger candidate for an industrial redesign because its comparison record identifies an approximately 50K-LUT SE device with an industrial temperature suffix, while retaining the 672-ball package class. It can still change pin mapping or device-specific features. Use the manufacturer device comparison and pin tables to make the final choice.
What is the difference between LFE2-50E-6F672C and LFE2-50E-5F672C?
The primary documented difference is the FPGA speed grade: the LFE2-50E-6F672C is rated -6, while the LFE2-50E-5F672C is rated -5. Both belong to the same 50K ECP2 resource class and can use the 672-ball package, making the -5 device a possible timing-conservative drop-in candidate. The slower grade may reduce achievable clock or timing margin, while the -6 device offers more performance headroom. Validate the design with the manufacturer timing models and complete tool-supported timing analysis.
When should I choose LFE2-50E-6F672C over a -5 or -7 speed-grade alternative?
Choose the LFE2-50E-6F672C when its -6 performance grade provides the required timing margin without changing an already validated design. A -5 alternative can be useful when timing closure is comfortable and a lower-cost or otherwise preferable supply position is needed, but it may require additional margin. A -7 alternative may improve timing performance while potentially changing power and cost characteristics. The correct decision depends on post-route timing, power, thermal results, tool support, and the exact package suffix of the replacement.
Is LFE2-50E-6F672C suitable for industrial automation and factory control?
The LFE2-50E-6F672C is functionally suitable for industrial automation when its specified temperature range and interface requirements satisfy the system. Its 48,000 logic elements, 500 programmable I/O, 396,288 RAM bits, and DSP resources support control logic, signal conditioning, parallel interfaces, and machine communication. Because the exact operating-temperature limits were not stated in the product records, use the Lattice Semiconductor manufacturer datasheet to confirm the grade. For newly released industrial equipment, an explicitly industrial-marked family member may simplify qualification.
Where to buy LFE2-50E-6F672C online?
Use the Request a Quote form on this page to ask about LFE2-50E-6F672C availability, lot traceability, and the 672-ball tray packaging. The manufacturer product records identify the exact device as an active ECP2 FPGA with 48K LUTs, 500 I/O, 396,288 RAM bits, and a 1.2 V core. A formal quote allows the purchasing team to confirm current stock, lead time, authorized sourcing, date codes, and quantity breaks without relying on an outdated listing.
What is the price of LFE2-50E-6F672C?
Current pricing for the LFE2-50E-6F672C should be requested through the Request a Quote form on this page because prices and availability change with quantity, sourcing channel, and lead time. The part is identified as an ECP2 FPGA with 48K LUTs, 500 I/O, and a 672-ball BGA package. The quote can also confirm tray availability, minimum order quantity, authorized supply, and date-code requirements for production procurement.
What is the lead time for LFE2-50E-6F672C?
Request the current LFE2-50E-6F672C lead time through the Request a Quote form on this page. Lead time depends on factory inventory, allocated production capacity, package volume, date-code requirements, and the number of trays ordered. The device is listed in tray packaging, so include the required tray quantity in the inquiry. A quotation response can provide the most reliable schedule and any available allocation for the exact 672-ball order code.
Is LFE2-50E-6F672C in stock?
The current LFE2-50E-6F672C stock position should be confirmed through the Request a Quote form on this page rather than inferred from a product listing. Availability can vary by lot, tray quantity, date code, and regional supply conditions. Include the required quantity and production schedule in the request so the commercial response reflects usable inventory rather than a generic catalog status.
What design considerations matter for the LFE2-50E-6F672C 672-BBGA package?
The LFE2-50E-6F672C 672-BBGA package requires careful PCB escape routing, continuous power and ground planes, controlled-impedance routing where applicable, and assembly support appropriate for a fine-pitch BGA. The high ball count increases via and fan-out complexity, while the 1.2 V core rail requires a low-noise supply arrangement. Follow the Lattice Semiconductor manufacturer package drawing and recommended land pattern, and prototype the assembly process before high-volume production.
Does the LFE2-50E-6F672C support RoHS, REACH, or automotive qualification?
The RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status of LFE2-50E-6F672C must be confirmed from the current Lattice Semiconductor manufacturer product documentation or declaration. The technical device records establish the ECP2 function, 48K LUT count, 500 I/O, 396,288 RAM bits, 1.2 V core, -6 speed grade, and 672-ball package, but they do not establish every compliance declaration. For automotive or regulated production use, request the exact material and qualification records for the ordered part.

工程參考資料,適用於 LFE2-50E-6F672C — 比較、設計指引及合規資訊。

選型指南

Choose the LFE2-50E-6F672C when a design requires the established ECP2 48,000-logic-element device with 48K LUTs, 500 programmable I/O, 396,288 RAM bits, a 1.2 V core, -6 timing, and a 672-ball BGA. The LFE2-50E-6FN672C is the closest documented same-package candidate, but its N-marked code must be checked for any package, grade, or commercial distinction. Use LFE2-50E-5F672C only when the slower grade still closes timing, and use LFE2-50E-7F672C when additional performance justifies evaluating its power and thermal behavior. Consider LFE2-50SE-6FN672I for an industrial redesign requiring a different ECP2 device type and temperature class. Finally, consider LFE2-50E-6F672I when an industrial suffix is needed. In every case, verify the manufacturer pin map, electrical characteristics, configuration method, and qualification before approving a same-footprint substitution.

與替代品比較

參數 本產品 LFE2-50E-6FN672C LFE2-50SE-6FN672I LFE2-50E-5F672C LFE2-50E-7F672C LFE2-50E-6F672I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 672-ball BGA 672-ball BGA 672-ball BGA 672-ball BGA 672-ball BGA 672-ball BGA
Device Family ECP2 ECP2 ECP2 SE ECP2 ECP2 ECP2
Logic Elements 48,000 logic elements 48K LUT class Approximately 50K LUTs 48K LUT class 48K LUT class 48K LUT class
Speed Grade -6 -6 -6 -5 -7 -6

主要差異化特點

  • Balanced logic and interface resources (對比LFE2-50SE-6FN672I)
  • Established -6 performance grade (對比LFE2-50E-5F672C)
  • Lower-latency timing option (對比LFE2-50E-7F672C)
  • Directly documented near-order code (對比LFE2-50E-6F672I)

設計說明

Design the 672-ball BGA escape layer from the manufacturer package drawing rather than estimating pitch or ball-map details. Preserve uninterrupted reference planes beneath the device, provide symmetric decoupling paths to the 1.2 V core, and account for assembly access, board warpage, and the BGA attach process. A prototype assembly should verify impedance, solder-joint reliability, and programming behavior before the layout is used for production quantities.

Use the manufacturer power-supply and decoupling recommendations for the ECP2 core and user I/O rails. Place the smallest suitable high-frequency bypass capacitors adjacent to their assigned BGA power balls, then add bulk capacitance near the regulator or supply entry point. Separate noisy switching supplies from sensitive FPGA rails where practical, and verify startup sequencing and configuration behavior when the board contains multiple voltage domains.

Treat configuration, clock, and high-speed user interfaces as separate layout concerns. Route clocks over continuous reference planes with matched return paths, keep configuration pins away from aggressive switching nodes, and apply the device's supported I/O standards to each external interface. Because the 672-ball package limits direct escape options, plan via transitions and signal-layer transitions early; changes to the ball map can otherwise create routing congestion around the device.

Do not assume that an LFE2-50E order code with a different speed, device-type, package, or temperature suffix is automatically interchangeable. Compare the manufacturer device table, ball map, supported I/O, electrical limits, configuration method, and temperature grade. In particular, validate the -5 and -7 alternatives with post-route timing analysis and validate the SE or industrial-marked candidates against every original requirement before approving a drop-in change.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The technical product records do not establish material-compliance or automotive-qualification declarations. AEC-Q100 is recorded as not applicable because this exact order code is not identified as an automotive-qualified variant; an I-marked alternative is not automatically AEC-Q100 qualified.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LFE2-50E-6F672C datasheet LFE2-50E-6F672C datasheet pdf LFE2-50E-6F672C pinout LFE2-50E-6F672C footprint LFE2-50E-6F672C specifications LFE2-50E-6F672C equivalent LFE2-50E-6F672C replacement LFE2-50E-6F672C drop-in replacement LFE2-50E-6F672C vs LFE2-50SE-6FN672I LFE2-50E-6F672C price LFE2-50E-6F672C stock Lattice LFE2-50E-6F672C LFE2-50E-6F672C industrial control LFE2-50E-6F672C DSP application what is LFE2-50E-6F672C

相關元件與詞彙

Lattice Semiconductor LFE2-50E-6F672C LFE2-50E-6FN672C LFE2-50SE-6FN672I LFE2-50E-5F672C LFE2-50E-7F672C LFE2-50E-6F672I ECP2 FPGA field-programmable gate array digital logic IC programmable logic device logic element look-up table LUT block RAM 396,288 RAM bits 500 programmable I/O 1.2 V core voltage -6 speed grade 90 nm FPGA technology DSP block 672-ball BGA fine-pitch BGA surface mount industrial automation programmable logic prototype communication interface signal processing
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情