Texas Instruments

LM258DRE4 - Dual 30V 700kHz Op Amp | Texas Instruments

MPN: LM258DRE4 ✓ פעיל
30 V Vdss 0.7 mA Id 8-SOIC, 3.90 mm body width Package
כמות הזמנה מינימלית: 1 |

LM258DRE4 סקירה

The Texas Instruments LM258DRE4 is a dual general-purpose operational amplifier rated for 30 V operation, featuring a 700 kHz gain-bandwidth product and a typical slew rate of 0.3 V/µs. The device contains two amplifiers in an 8-pin SOIC package and is intended for operation from -25°C to +85°C. Its 0.7 mA typical supply-current drain supports low-power signal-conditioning systems operating from single or dual supplies.

An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to process signals whose voltage lies above or below its supply rails. In the electronics hierarchy, the LM258 is a general-purpose operational amplifier, a dual amplifier, and ultimately an analog semiconductor. Its internal frequency compensation, common-mode input range that includes ground, and low bias current make it useful for amplifying weak signals without requiring an external compensation network.

The LM258DRE4 combines a 700 kHz gain-bandwidth product with a 0.3 V/µs slew rate, allowing relatively low-frequency control, sensing, and buffering functions to be handled without an external compensation network. Typical input offset voltage is 3 mV, while typical input offset current is 2 nA and typical input bias current is 20 nA. The device also accepts differential input voltages up to 32 V, although the 30 V maximum supply rating remains the governing operating limit.

Both amplifier channels share the same pinout and common supply connections, allowing one IC to implement two related signal-processing functions. The SOIC-8 construction uses gull-wing leads and supports conventional surface-mount assembly. Because the amplifiers are not rail-to-rail output devices, output swing and common-mode behavior must be checked against the selected supply voltages and load. Input-referred offset and bias characteristics are especially important when the source impedance is high or when precision DC measurements are required.

Typical LM258DRE4 applications include industrial sensor conditioning, low-frequency active filters, audio preamplifier stages, voltage-controlled amplifiers, relay-driver interfaces, and general-purpose DC signal amplification. The 30 V capability accommodates 24 V industrial systems when the signal and supply voltages remain within the device limits. The low 0.7 mA typical supply-current drain is useful where multiple amplifier channels must operate continuously within a limited power budget.

The principal design trade-off is its 700 kHz bandwidth: this is ample for many sensor, control, and audio tasks but too slow for high-speed instrumentation or communications waveforms. Input bias current of 20 nA typical can create offset errors across high source impedances, and the 3 mV typical input offset should be included in overall accuracy budgets. Decoupling, grounding, and output-load stability must be evaluated using the manufacturer application guidance.

This page consolidates the device specifications, pin assignments, sourcing information, and practical alternatives into an engineering-focused reference. It also distinguishes true package-compatible replacements from parts that merely perform a similar amplifier function, helping designers preserve PCB layout, supply compatibility, and signal-chain performance during obsolescence or second-source evaluation.

חלופות תחליף ישיר עבור LM258DRE4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM258DRE4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Operating Temperature Range.

Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -25°C to 85°C
השווה עם LM258DRE4 →
STMicroelectronics
Package: 8-pin SOIC
השווה עם LM258DRE4 →

LM258DR

✅ Drop-In
STMicroelectronics
📦 8-SOIC
2 circuits · Two independent, internally frequency-compensated operational amplifiers · 30 V · 700 kHz · Single supply or split supply · Extends toward ground and VEE · Low-power class · Standard general-purpose amplifier

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM258AD

✅ Drop-In
Texas Instruments
📦 8-SOIC
Dual operational amplifier · 2 circuits · 30 V · 700 kHz · 1.1 MHz · 100 dB · 500 uA · 20 nA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM258AYDT

✅ Drop-In
📦 8-SOIC
Same 8-pin SOIC dual-amplifier interface with 0-pin-count difference; electrical offset, current, and qualification differences require datasheet verification.

📋 חלופה להתייחסות (לא בקטלוג)

TSH22IDT

✅ Drop-In
📦 SO-8
Same 8-pin SO-8 dual-amplifier interface with 0-pin-count difference; the cross-reference identifies expected pin compatibility, but voltage and timing deltas are not stated.

📋 חלופה להתייחסות (לא בקטלוג)

TSB7192IDT

✅ Drop-In
📦 SO-8
Same 8-pin SO-8 dual-amplifier interface with 0-pin-count difference; the cross-reference identifies expected pin compatibility, but voltage and timing deltas are not stated.

📋 חלופה להתייחסות (לא בקטלוג)

LM258DRE4 דירוגים מרביים ומאפיינים חשמליים

Amplifier Type General-purpose operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 30 V
Single-Supply Operating Range Up to 26 V
Dual-Supply Operating Range Up to 52 V total
Gain-Bandwidth Product 700 kHz
Slew Rate 0.3 V/µs
Typical Supply-Current Drain 0.7 mA
טווח טמפרטורת פעולה -25°C to +85°C
Typical Input Offset Voltage 3 mV
Typical Input Offset Current 2 nA
Typical Input Bias Current 20 nA
Maximum Differential Input Voltage 32 V
Common-Mode Input Range Includes ground
מארז 8-SOIC, 3.90 mm body width
סוג הרכבה Surface mount
Shipping Package Tape and reel

תצורת פינים של LM258DRE4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
פין 1 OUTA — Amplifier A output
פין 2 INA- — Inverting input for amplifier A
פין 3 INA+ — Non-inverting input for amplifier A
פין 4 V- — Negative supply connection
פין 5 INB+ — Non-inverting input for amplifier B
פין 6 INB- — Inverting input for amplifier B
פין 7 OUTB — Amplifier B output
פין 8 V+ — Positive supply connection

יישומים טיפוסיים

LM258DRE4 מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffer, Active Filtering and Control Loops, Power Supply Monitoring, Data Acquisition Front End, Automotive and Heavy Equipment Interface.

🏭

Industrial Sensor Signal Conditioning

The LM258DRE4 is suitable for amplifying low-level outputs from industrial temperature, pressure, and position sensors. Its 700 kHz gain-bandwidth product provides ample bandwidth for many externally filtered sensor channels, while the common-mode input range includes ground supports signals referenced close to the lower supply rail. A typical conditioning stage can use one channel for gain and the second for buffering or active filtering. The main accuracy consideration is the 3 mV typical input offset, which should be included in the sensor error budget, while the 20 nA typical bias current matters when the source impedance is high.

🎧

Audio Preamplifier and Buffer

The LM258DRE4 can provide gain and impedance buffering in modest audio and communication paths. Its 0.3 V/µs slew rate and 700 kHz bandwidth cover low-frequency program-audio and control-signal applications, and the dual layout allows one channel to amplify a signal while the other buffers the result. The device is not a rail-to-rail amplifier, so the output swing must remain within the usable region of the selected supply. Its 3 mV typical offset may also be audible in very low-noise stages, making additional filtering or a higher-precision amplifier preferable for demanding hi-fi designs.

🔧

Active Filtering and Control Loops

The internally compensated LM258DRE4 is useful in first- and second-order low-frequency active filters, integrators, and control loops. Its 700 kHz gain-bandwidth product permits useful closed-loop gain at frequencies well below the device limit, while the typical 0.7 mA supply-current drain supports continuously powered equipment. Stable operation with the capacitive loads encountered in filtering and cable-driven stages must be checked against the manufacturer guidance. Designers should also avoid operating too close to the supply rails because the output does not swing fully rail-to-rail.

⚡

Power Supply Monitoring

The LM258DRE4 can monitor a 24 V industrial supply or generate an analog control signal by comparing a divided feedback voltage with a reference. The 30 V maximum supply rating provides useful margin in nominal 24 V systems when transient and tolerance limits are controlled. One channel performs the comparison function while the second amplifies or buffers the result for an ADC or actuator interface. Because the device is not a precision comparator, offset voltage and drift directly affect threshold accuracy; for high-resolution monitoring, use a low-offset amplifier or comparator with a defined input range.

🖥️

Data Acquisition Front End

The dual LM258DRE4 channels can condition two low-frequency inputs in a compact data-acquisition module. The 700 kHz bandwidth suits sensor signals after anti-alias filtering, and the common-mode input range including ground simplifies systems with bipolar sensor outputs biased around the lower rail. The internal frequency compensation reduces external component count for basic non-inverting and inverting stages. Accuracy limits must be managed by accounting for 3 mV typical input offset, 2 nA typical offset current, and 20 nA typical bias current, especially when multiplexer impedance and cable leakage vary between channels.

🚗

Automotive and Heavy Equipment Interface

The LM258DRE4 can implement low-frequency interface functions in heavy equipment and automotive electronic systems when the specific operating environment is within the device rating. Its 30 V supply capability is useful for systems connected to 24 V electrical environments, and the 700 kHz bandwidth is sufficient for many sensor and actuator conditioning channels. The standard LM258DRE4 ordering code should not be assumed to be AEC-Q100 qualified. Automotive programs must select an explicitly qualified orderable part, verify the −25°C to +85°C grade against the system requirement, and apply the manufacturer’s transient and protection guidance.

What are the key specifications of LM258DRE4 that engineers should know?
The LM258DRE4 is a dual, general-purpose operational amplifier with a 30 V maximum supply rating, 700 kHz gain-bandwidth product, and 0.3 V/µs slew rate. According to the Texas Instruments LM258 product page and manufacturer datasheet, it provides two amplifiers in an 8-pin SOIC, operates from -25°C to +85°C, and typically draws 0.7 mA. Typical input offset voltage is 3 mV, typical offset current is 2 nA, and typical bias current is 20 nA. These characteristics make it most appropriate for general-purpose industrial, control, sensing, and low-frequency analog signal-conditioning circuits rather than high-speed precision applications.
What is the operating voltage of LM258DRE4?
The LM258DRE4 supports a maximum supply voltage of 30 V and can operate from a single supply up to 26 V or a dual supply totaling 52 V. The Texas Instruments LM258 datasheet also specifies a maximum differential input voltage of 32 V. These are separate ratings: the 30 V figure limits the total supply voltage, while the 32 V differential-input limit applies across the amplifier inputs. Designers should use the lower applicable limit and include operating transients, supply tolerances, and protection-network behavior when evaluating the absolute maximum ratings.
Can LM258DRE4 run on a single 5V supply?
Yes, the LM258DRE4 can operate from a single 5 V supply because its single-supply range extends to 26 V and its common-mode input range includes ground. This makes it suitable for 5 V sensor-conditioning circuits in which the signal is referenced to the lower supply rail. The output swing is not rail-to-rail, so the usable output range and input range must remain inside the linear operating region. Follow the manufacturer datasheet for input and output characteristic curves when designing near either supply rail.
What is the gain-bandwidth product and slew rate of LM258DRE4?
The LM258DRE4 has a 700 kHz gain-bandwidth product and a typical slew rate of 0.3 V/µs, as specified by Texas Instruments. These figures define its useful small-signal bandwidth and large-signal response, respectively. Closed-loop gains reduce the practical bandwidth according to the noise-gain curve, while slew rate determines how quickly the output can follow larger voltage steps. The device is therefore appropriate for low-frequency control, buffering, filtering, and sensor amplification, but not for high-speed video or communications waveforms.
Where can I download the LM258DRE4 datasheet PDF?
The official LM258DRE4 datasheet can be downloaded from the Texas Instruments literature link at https://www.ti.com/lit/gpn/LM258. The manufacturer datasheet contains the detailed electrical characteristics, typical performance curves, pin configuration, application guidance, and ordering information. Use that document for final design verification, including maximum ratings, common-mode behavior, output swing, supply-current limits, and package details. The related LM258 product page at https://www.ti.com/product/LM258 provides lifecycle, quality, and ordering information for the device family.
Where can I find the LM258DRE4 pinout?
The LM258DRE4 pinout is documented in the Texas Instruments LM258 manufacturer datasheet at https://www.ti.com/lit/gpn/LM258. The 8-pin SOIC uses the standard dual-operational-amplifier arrangement: OUTA is pin 1, INA- is pin 2, INA+ is pin 3, V- is pin 4, INB+ is pin 5, INB- is pin 6, OUTB is pin 7, and V+ is pin 8. Use the pin-description table and package drawing in the datasheet when assigning PCB tracks or verifying orientation against the manufacturer diagram.
What can replace the LM258DRE4?
The closest drop-in choices include LM258DR and LM258AD from Texas Instruments, because they retain the 8-pin SOIC dual-amplifier interface and the LM258 family’s 30 V, 700 kHz class of operation. Cross-brand options include LM258AYDT, TSH22IDT, and TSB7192IDT in compatible 8-pin SOIC packages, but their electrical limits, offset performance, and qualification should be checked against the LM258 datasheet before substitution. A mechanical footprint match alone does not guarantee equivalent bias current, common-mode range, output swing, or slew rate.
Is LM258DRE4 the same as LM258DR?
The LM258DRE4 and LM258DR are electrically members of the same LM258 family and use the same 8-pin SOIC amplifier layout, with nominally identical 30 V supply and 700 kHz gain-bandwidth ratings. Their orderable codes refer to different manufacturer shipping or qualification options rather than different circuit functions. For a new design, confirm the exact temperature grade, package delivery method, and current ordering status against the Texas Instruments LM258 product page. Existing boards can generally retain the same pinout when those device-specific options meet the original requirements.
LM258DRE4 vs LM2904PWR — which is better for industrial control?
Choose LM258DRE4 when the design needs the standard LM258 operating grade and its 30 V, 700 kHz general-purpose behavior. Choose LM2904PWR when the application requires the broader temperature range associated with the LM2904 family for industrial environments. The parts share the familiar dual-amplifier SOIC interface, but the operating-temperature grades and possibly device-specific limits differ. For either choice, verify the exact ordering code, supply range, input bias current, output swing, and stability requirements against the relevant manufacturer datasheet.
When should I choose LM258DRE4 over a newer dual op amp?
Choose LM258DRE4 when an existing 8-pin SOIC design needs a familiar, dual general-purpose amplifier with 30 V supply capability, 700 kHz bandwidth, and a typical 0.7 mA supply-current drain. It is practical for industrial control and sensor-conditioning circuits where the signal bandwidth is modest and supply-voltage tolerance matters. Select a newer amplifier instead when rail-to-rail input or output operation, lower offset voltage, lower noise, faster slew rate, lower quiescent current, or narrower supply range is necessary. The original footprint can remain useful even when performance is adequate.
Is LM258DRE4 suitable for sensor conditioning and low-frequency filters?
Yes, the LM258DRE4 is well suited to many low-frequency sensor-conditioning and active-filter applications. Its 700 kHz gain-bandwidth product supports moderate closed-loop gains, while internally compensated operation simplifies basic amplifier design. The common-mode input range includes ground, which helps with sensors biased near 0 V. However, the 3 mV typical input offset and 20 nA typical bias current can be significant with high-impedance sources or precision DC measurements, so those effects should be included in the error budget.
What is the best cross-brand equivalent for LM258DRE4?
LM258AYDT is a cross-brand candidate because it is identified in a direct LM258AYDT-to-LM258DRE4 comparison and occupies the same 8-pin SOIC class. It is the best candidate to evaluate when sourcing flexibility is more important than retaining the exact Texas Instruments ordering code. Confirm its pin assignments, supply-voltage rating, gain-bandwidth product, input bias current, common-mode range, output swing, and temperature grade before approving a drop-in substitution. TSH22IDT and TSB7192IDT are additional SO-8 options to review for redesigned or second-source boards.
Where can I buy LM258DRE4 and what is the lead time?
Use the Request a Quote form on this page to ask about LM258DRE4 availability, current unit pricing, minimum order quantity, and production lead time. The part is listed as a standard, general-purpose, dual-amplifier device in an 8-SOIC package, and a distributor result reports inventory in stock. Because stock and lead time can change rapidly, request a written quotation for the exact LM258DRE4 ordering code, reel quantity, and shipment destination before committing the component to a production schedule.
How much does LM258DRE4 cost and is it in stock?
LM258DRE4 is a standard catalog component with an 8-SOIC package, and one distributor listing reports inventory in stock. Commercial availability and current transaction terms can change without notice, so use the Request a Quote form on this page for the current unit price, reel quantity, and stock confirmation. When requesting a quotation, specify the exact LM258DRE4 MPN, quantity, target shipment date, and delivery country. This avoids relying on a stale listing or confusing LM258 package codes that may use different shipping formats.
Does LM258DRE4 meet RoHS, REACH, or automotive qualification requirements?
The LM258DRE4’s environmental and automotive qualification status should be confirmed from the Texas Instruments LM258 product page and its material-declaration records before release. It is a standard general-purpose analog IC rather than an automotive-qualified ordering code, so it should not be treated as AEC-Q100 qualified without explicit manufacturer documentation. Request the latest compliance declarations and, when automotive use is intended, select an ordering code that carries the required qualification. The RoHS and REACH values in the specifications table remain unresolved until confirmed in those documents.

נתוני עזר הנדסיים עבור LM258DRE4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LM258DRE4 when maintaining an established 8-SOIC general-purpose dual-amplifier design is more important than obtaining rail-to-rail operation or precision performance. It is well matched to industrial sensor signals, low-frequency filters, control loops, 24 V monitoring, and general-purpose signal conditioning where a 700 kHz bandwidth, 30 V supply rating, and typical 0.7 mA supply-current drain are sufficient. LM258DR or LM258AD are natural same-manufacturer alternatives when their orderable options satisfy the temperature, qualification, and delivery requirements. For a broader industrial temperature range, evaluate LM2904PWR. Consider LM258AYDT, TSH22IDT, or TSB7192IDT only after checking their complete electrical specifications and pin assignments. Do not select a cross-brand option solely from its SO-8 outline; input bias current, offset, common-mode range, output swing, slew rate, and stability with the intended load can change the circuit behavior.

השוואה עם חלופות

פרמטר מוצר זה LM258DR LM258AD LM258AYDT TSH22IDT TSB7192IDT
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same SO-8 - same SO-8 - same
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier

מבדילים עיקריים

  • Established dual LM258 electrical platform in a standard 8-SOIC footprint (לעומתTSH22IDT)
  • Low typical supply-current drain for a dual high-voltage amplifier (לעומתLM258AYDT)
  • Higher specified gain-bandwidth product than the low-speed reference point (לעומתLM258DR)

הערות תכנון

The LM258DRE4 can operate from a single supply up to 26 V or a dual supply totaling 52 V, but the absolute maximum supply rating is 30 V. Do not treat the 52 V dual-supply figure as a 52 V rail-to-rail operating condition. Place the positive supply bypass capacitor close to pin 8 and the negative bypass capacitor close to pin 4. For single-supply operation, connect V- to the ground reference and verify that input and output voltages remain inside the linear operating range rather than assuming rail-to-rail behavior.

Input bias and offset errors can dominate high-impedance sensor designs. The LM258DRE4 has 3 mV typical input offset voltage, 2 nA typical offset current, and 20 nA typical input bias current. Estimate the bias-current contribution with the formula VERROR = IB × RSOURCE and include resistor and sensor tolerance in the overall error budget. If the calculated error is too large, reduce the source impedance, use a lower-bias-current amplifier, or add a low-offset instrumentation stage.

Treat the two amplifier channels as electrically similar but keep each channel’s feedback network and input routing compact. Place input and feedback components adjacent to their associated pins, maintain a low-impedance ground return for pin 4, and avoid routing high-impedance input traces beside supply and digital return paths. The 8-SOIC footprint is standard and compatible across the listed alternatives, but verify the exact pinout of every cross-brand candidate before releasing a substitution.

The LM258 is a general-purpose, non-rail-to-rail amplifier, so output swing and common-mode limits constrain its usable voltage range. Do not design the output to reach the positive or negative rail, and do not assume inputs can move above V+ or below the usable common-mode boundary. The 700 kHz gain-bandwidth product also limits closed-loop bandwidth as gain increases. Check the manufacturer performance curves for the intended gain, output load, supply voltage, and temperature before finalizing the analog front end.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The standard LM258DRE4 ordering code is not identified as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s current product or material-compliance documentation.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LM258DRE4 datasheet LM258DRE4 pinout LM258DRE4 datasheet pdf LM258DRE4 equivalent LM258DRE4 replacement LM258DRE4 cross reference LM258DRE4 price LM258DRE4 stock Texas Instruments LM258DRE4 LM258DRE4 30V 700kHz op amp LM258DRE4 SOIC-8 amplifier LM258DRE4 sensor conditioning LM258DRE4 vs LM258DR LM258DRE4 application circuit

רכיבים ומונחים קשורים

Texas Instruments LM258 LM258DRE4 LM258DR LM258AD STMicroelectronics LM258AYDT TSH22IDT TSB7192IDT operational amplifier dual operational amplifier general-purpose amplifier analog IC semiconductor gain-bandwidth product slew rate input offset voltage input offset current input bias current common-mode input range 8-SOIC SOIC package surface mount industrial sensor conditioning
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר