LM258WYDT - Dual 1.1MHz Operational Amplifier | STMicroelectronics
MPN: LM258WYDT ✓ פעילLM258WYDT סקירה
An operational amplifier, or op amp, is an active semiconductor device that amplifies the voltage difference between its two input terminals. Its high open-loop gain, high input impedance, and low output impedance make it useful in amplifier, buffer, comparator, summing, filtering, and current-control circuits. The dual LM258 family combines two independent amplifiers in one package, reducing component count and simplifying PCB layout.
The LM258WYDT provides two amplifier circuits in an 8-SOIC package and operates at a gain-bandwidth product of 1.1 MHz. Its general-purpose design is suitable for low-frequency instrumentation and industrial signal paths rather than high-speed precision applications. The extended-temperature -W grade is intended for environments beyond the standard commercial temperature range, subject to the operating limits in the STMicroelectronics datasheet.
The LM258 architecture supports operation from a single supply or split supplies, allowing its input and output signals to be referenced near ground when lower supply voltages are required. Because the two amplifiers share one package, careful decoupling and grounding remain important: each supply rail should have local bypass capacitance, and the common ground path should minimize voltage-drop-induced errors.
Typical uses include process-control loops, sensor conditioning, current monitoring, audio and communications interfaces, industrial data acquisition, and general-purpose analog signal conditioning. Each channel can be used independently as an inverting or non-inverting amplifier, voltage follower, comparator, or active-filter building block, provided the input, output, and common-mode ranges remain inside the datasheet limits.
When laying out the circuit, place the supply bypass capacitors close to the package power pins and route sensitive input and feedback connections away from switching nodes and high-current returns. Check output swing, input common-mode range, stability, and output-current requirements against the actual supply voltage and load before releasing the design.
This product summary combines the LM258WYDT device identity, package information, application guidance, and verified drop-in alternatives with practical design considerations for engineers evaluating an 8-SOIC dual op amp.
חלופות תחליף ישיר עבור LM258WYDT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
LM258DR2G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LM358ADT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TSH22IDT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TSB7192IDT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LM258WYDT דירוגים מרביים ומאפיינים חשמליים
| Product Type | Dual general-purpose operational amplifier |
| Amplifier Circuit Count | 2 circuits |
| Gain-Bandwidth Product | 1.1 MHz |
| מארז | 8-SOIC |
| Total Pin Count | 8 pins |
| סוג הרכבה | Surface mount |
| Packing Option | T tape and reel |
| Temperature Grade | -W extended industrial temperature grade |
| Supply Configuration | Single supply or split supply |
מדריך תצורת פינים של LM258WYDT 8-soic
תצורת פינים עבור LM258WYDT (מארזת 8-soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור LM258WYDT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LM258WYDT מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Current Monitoring and Control Loops, Instrumentation and Data Acquisition, Audio and Communications Interfaces, Active Filtering and Signal Conditioning, Automation and Control Systems.
Industrial Sensor Signal Conditioning
The LM258WYDT fits two-stage industrial sensor conditioning because it combines two independent amplifiers with a 1.1 MHz gain-bandwidth product in one 8-SOIC package. One channel can amplify or level-shift a sensor output, while the second can buffer the result or form an active filter. Its general-purpose architecture supports moderate-bandwidth feedback networks and its -W grade targets extended industrial environments. The design must still verify that the sensor signal remains inside the input common-mode range and that the output does not exceed the available voltage swing.
מומלץ
Current Monitoring and Control Loops
The LM258WYDT is useful in current-monitoring and industrial control circuits that require gain, filtering, and buffering in a compact two-channel device. With a 1.1 MHz gain-bandwidth product, each channel can support moderate-frequency closed-loop operation and error-amplifier functions. A shunt amplifier can use one channel for amplification and the other for filtering or reference conditioning. Verify output-current capability, output swing, input bias current, and stability with the actual sensor and feedback values.
מומלץ
Instrumentation and Data Acquisition
The two channels in the LM258WYDT can reduce analog-front-end complexity in instrumentation and data-acquisition systems. A typical arrangement uses one channel for gain and the second for active filtering or buffering before an ADC input. The 1.1 MHz gain-bandwidth product supports common low-to-moderate-bandwidth instrumentation signals, while the 8-SOIC package simplifies board layout. The engineer should check input offset, common-mode range, output swing, noise, and ADC drive requirements against the manufacturer datasheet.
מומלץ
Audio and Communications Interfaces
The LM258WYDT can implement low-frequency audio or communications interface functions where two general-purpose amplifier channels are needed without rail-to-rail performance. One channel may provide voltage gain while the other drives a coupling stage, buffers a control signal, or implements active filtering. Its 1.1 MHz gain-bandwidth product is appropriate for many baseband and control-signal paths. Check the output drive, load, slew rate, common-mode range, and allowable output distortion for the target signal level.
מומלץ
Active Filtering and Signal Conditioning
The LM258WYDT is appropriate for active-filter and general signal-conditioning stages that require two independent op amps and moderate closed-loop bandwidth. The 1.1 MHz gain-bandwidth product can support first- and second-order sections when component values and noise gain are selected appropriately. A single 8-SOIC package can implement a low-pass filter plus buffer, or a gain stage plus anti-alias filter. Validate noise gain, phase margin, component tolerances, output loading, and supply-voltage headroom in simulation and on the bench.
מומלץ
Automation and Control Systems
The LM258WYDT can support automation blocks that compare, amplify, or buffer low-frequency control signals. Its two channels allow a comparator function and a feedback amplifier to coexist in one package, reducing board area. The -W temperature grade is useful when ambient conditions extend beyond the standard commercial range. Ensure the chosen supply voltage supports the required input and output ranges, and review offset and bias-current errors when the controlled quantity requires high accuracy.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LM258WYDT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LM258DR2G | LM358ADT | TSH22IDT | TSB7192IDT |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Amplifier Circuit Count | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Total Pin Count | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
| Product Classification | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | Dual operational amplifier | Dual operational amplifier |
מבדילים עיקריים
- Higher documented bandwidth than LM258DR2G (לעומתLM258DR2G)
- Two channels in a compact 8-SOIC package (לעומתLM324ADR)
- Extended industrial temperature option (לעומתLM358ADT)
הערות תכנון
Place the supply bypass capacitors immediately adjacent to the LM258WYDT power and ground pins. Keep the loop formed by the capacitor, package power pin, package ground pin, and ground plane physically small. This reduces supply-impedance feedback and helps the two amplifier channels maintain predictable operation when both are active.
Route each non-inverting input directly to its source and keep each inverting-input feedback trace short and away from switching nodes. Because both channels share the package and ground reference, a common return-current path can couple noise from one channel into the other. Use a quiet ground region for sensitive inputs and provide a separate return path for output loads.
Do not assume that two channels in one package are automatically independent at every frequency. Internal power and ground connections can couple disturbances between channels, and output loads can create return-current transients. Verify output-current capability, capacitive-load stability, common-mode range, output swing, and supply headroom for the worst operating condition in the manufacturer datasheet.
Check closed-loop stability using the actual noise gain and load rather than relying only on the 1.1 MHz gain-bandwidth-product figure. For filtering or sensing applications, calculate the gain profile across the signal band and add suitable compensation for high-capacitance loads. Use the manufacturer test conditions as the basis for comparisons with alternative devices.
מידע על תאימות
The product listing references RoHS and AEC-Q100, but it does not provide an explicit compliance or qualification declaration. Confirm the current declarations and ordering-code qualification status with STMicroelectronics before use in regulated production.