Texas Instruments

LM2902KNS - 26V Quad 1.2MHz Op Amp | Texas Instruments

MPN: LM2902KNS ✓ פעיל
26 V Vdss 20 nA Id 14-SOIC, 0.209 inch, 5.30 mm width Package
כמות הזמנה מינימלית: 1 |

LM2902KNS סקירה

The Texas Instruments LM2902KNS is a quad general-purpose operational amplifier designed for a 26 V maximum supply voltage, with a 1.2 MHz gain-bandwidth product and improved 2 kV ESD protection. The device is packaged in a 14-SOIC package measuring 0.209 inch, or 5.30 mm, wide. Four independent amplifiers are integrated into one package, making the LM2902KNS suitable for analog signal conditioning, sensor interfaces, feedback networks, and general instrumentation.

An operational amplifier is a voltage amplifier with very high open-loop gain, allowing it to amplify small signals when used with external negative feedback. A quad operational amplifier contains four amplifier sections in one package, providing a convenient way to implement several analog functions while reducing the number of components on a circuit board. The LM2902K belongs to the broader operational-amplifier category, which is part of the linear and analog semiconductor hierarchy.

Key characteristics include four amplifier channels, a 1.2 MHz gain-bandwidth product, 26 V maximum supply capability, 20 nA input bias current, 80 dB open-loop gain, and approximately 0.5 uA quiescent current. The improved 2 kV ESD rating provides additional device protection in applications where exposed handling or connector-connected signals may introduce electrostatic transients. The 14-SOIC package is a conventional surface-mount package suited to conventional PCB assembly methods.

The LM2902KNS is intended for general-purpose analog applications rather than precision or high-speed signal-chain work. Its 1.2 MHz bandwidth is appropriate for audio-frequency, control, and instrumentation circuits where moderate operating speed and wide supply-voltage tolerance are more important than very high slew rate or extremely low offset voltage. The 26 V supply capability also makes it useful in circuits operating from higher-voltage industrial rails, provided the amplifier inputs and outputs remain within their permitted common-mode and output ranges.

Typical uses include four-channel sensor amplification, voltage buffering, active filtering, differential sensing, comparator-style threshold conditioning, and general feedback control. In a multi-amplifier design, the common package helps keep channel-to-channel placement compact, although each amplifier should still be evaluated for output-current capability, load impedance, stability, and noise performance in its intended circuit.

Designers should review the manufacturer datasheet for the complete electrical characteristics, recommended operating conditions, input and output limits, and package details. Decoupling capacitors should be placed close to the supply pins, unused amplifier sections should be configured according to the datasheet guidance, and input and output signals should not exceed the specified common-mode and output-voltage limits. This page summarizes the principal LM2902KNS characteristics and identifies drop-in alternatives with the same 14-SOIC footprint for engineering evaluation.

The information on this page combines the manufacturer product identification, distributor package and inventory descriptions, and cross-reference findings for LM2902KNS. It is intended to help engineers narrow the component choice, verify the package, and plan a replacement strategy before completing detailed circuit validation.

חלופות תחליף ישיר עבור LM2902KNS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM2902KNS (אותו גורם צורה וטביעת רגל) — שונים ב Maximum Supply Voltage, Package, Gain-Bandwidth Product, Amplifier Type, Number of Amplifier Channels.

onsemi
Maximum Supply Voltage: 32 V
Gain-Bandwidth Product: 1 MHz
Number of Amplifier Channels: 4 channels
השווה עם LM2902KNS →
Texas Instruments
Package: 14-SO
השווה עם LM2902KNS →
Texas Instruments
Maximum Supply Voltage: 36 V
Package: 8-pin SOIC
Amplifier Type: Standard general-purpose amplifier
השווה עם LM2902KNS →

LM2902KNSRG4

✅ Drop-In
Texas Instruments
📦 14-SOIC
4 circuits · 26 V · 1.2 MHz · 2 kV · 14-SO · 125 C · AEC-Q100 qualified · <500 V per MIL-STD-883, Method 3015

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902KNSRG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 14-SOIC
4 circuits · 26 V · 1.2 MHz · 2 kV · 14-SO · 125 C · AEC-Q100 qualified · <500 V per MIL-STD-883, Method 3015

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902K/NS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-SOIC
Same LM2902K family, 1.2 MHz bandwidth, 26 V rating, and 14-SOIC footprint; order-code suffix differs by approximately 0% in the identified core parameters

📋 חלופה להתייחסות (לא בקטלוג)

LM2902DG

✅ Drop-In
onsemi
📦 14-SOIC
Quad operational amplifier · 4 channels · General purpose · 1 MHz · 0.6 V/µs · 3 V · 32 V · True differential inputs

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM324ADG

✅ Drop-In
onsemi
📦 14-SOIC
General Purpose · 4 · 1 MHz · 0.6 V/us · 3 V to 32 V · +/-1.5 V to +/-16 V · 3 mV · 14-SOIC (0.154 in, 3.90 mm Width)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902KNS דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 circuits
Maximum Supply Voltage 26 V
Supply Voltage Range 3 V to 26 V
Gain-Bandwidth Product 1.2 MHz
Input Bias Current 20 nA
זרם מנוחה 0.5 uA
Open-Loop Gain 80 dB
ESD Protection 2 kV improved ESD
מארז 14-SOIC, 0.209 inch, 5.30 mm width
סוג הרכבה Surface mount
Operating Voltage, Positive 3 V to 26 V
Operating Voltage, Negative -26 V to -3 V
טווח מתח פלט Approximately -13 V to +13 V

תצורת פינים של LM2902KNS

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
פין 1 1OUT — Output of amplifier 1
פין 2 1IN- — Inverting input of amplifier 1
פין 3 1IN+ — Non-inverting input of amplifier 1
פין 4 V+ — Positive supply voltage
פין 5 2IN+ — Non-inverting input of amplifier 2
פין 6 2IN- — Inverting input of amplifier 2
פין 7 2OUT — Output of amplifier 2
פין 8 3OUT — Output of amplifier 3
פין 9 3IN- — Inverting input of amplifier 3
פין 10 3IN+ — Non-inverting input of amplifier 3
פין 11 V- — Negative supply voltage
פין 12 4IN+ — Non-inverting input of amplifier 4
פין 13 4IN- — Inverting input of amplifier 4
פין 14 4OUT — Output of amplifier 4

יישומים טיפוסיים

LM2902KNS מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Active Audio Filtering, Data Acquisition Buffering, Power Supply Control Loops, Voltage Level Interfaces, General Feedback Control.

🏭

Industrial Sensor Signal Conditioning

The LM2902KNS fits industrial sensor-conditioning circuits that amplify low-level signals and require several amplifier sections on a single board. Its four 1.2 MHz channels can support non-inverting and inverting gain stages, input buffering, and active-filter elements, while the 26 V supply capability accommodates higher-voltage industrial control environments. A practical arrangement might use one channel for sensor amplification, one for gain trim, and two for filtering or output conditioning. The design should verify the 20 nA input-bias-current requirement against sensor impedance and confirm input common-mode limits, output swing, and stability with the connected load before production deployment.

🎧

Active Audio Filtering

LM2902KNS can implement active filters and small-signal audio stages where four general-purpose amplifiers provide more flexibility than a single package. Its 1.2 MHz gain-bandwidth product offers substantially more bandwidth than low-frequency filter sections generally require, allowing useful closed-loop gain in the audio region. The 14-SOIC package simplifies assembly where conventional surface-mount op amps are preferred. Engineers should still check distortion, output-current capability, output swing, noise, and capacitive-load stability for the actual speaker-line or line-level network, especially when driving a low-impedance load.

📊

Data Acquisition Buffering

The four channels in LM2902KNS are useful for buffering multiplexed sensors, transducers, or dividers before an analog-to-digital converter. A 20 nA input-bias-current characteristic helps preserve accuracy when driving high-impedance sources, while 1.2 MHz bandwidth supports moderately fast settling in many acquisition paths. The amplifier can be arranged as a unity-gain voltage follower or as part of a differential front end. For precision systems, verify input offset, input voltage noise, common-mode range, settling behavior, and channel matching against the converter’s acquisition requirements rather than treating general-purpose performance as precision performance.

⚡

Power Supply Control Loops

LM2902KNS can implement error amplifiers, comparators, and feedback elements in industrial control and power-conversion systems requiring a 26 V-class amplifier. Four channels allow one section to monitor a feedback voltage, another to amplify an error signal, and additional sections to supervise signals or drive control stages. The 1.2 MHz bandwidth can respond to loop dynamics beyond very slow regulation loops, although compensation and stability must be evaluated with the switching stage and compensation network. Verify output-current capability and output-voltage limits before using any section to directly drive a transistor or load.

🔧

Voltage Level Interfaces

LM2902KNS is suitable for voltage-level interfaces between higher-voltage industrial signals and lower-voltage control electronics when the signal stays within the amplifier’s common-mode limits. Its 26 V supply capability provides more operating headroom than low-voltage-only amplifier families, and the four-channel package can implement several interface functions. A practical design may use two sections for differential attenuation and two for buffering or level translation. Because it is not a rail-to-rail precision amplifier, the engineer must verify both input common-mode range and output swing across temperature and supply tolerance.

🖥️

General Feedback Control

The four LM2902KNS amplifier sections support feedback-control, threshold, and error-amplification functions in instrumentation and embedded control systems. A 1.2 MHz gain-bandwidth product is useful for control paths faster than static comparators but well within the capabilities of the device’s general-purpose architecture. Multiple sections can implement command conditioning, position feedback, and output buffering in one package. Confirm loop stability, output slew behavior, load drive, and permissible output voltage for each channel. The 20 nA bias-current value should also be checked when feedback sources have substantial source impedance.

What is the LM2902KNS?
The LM2902KNS is a Texas Instruments quad general-purpose operational amplifier with four independent amplifier sections, a 1.2 MHz gain-bandwidth product, and operation up to 26 V. According to the Texas Instruments LM2902K product information, the device is packaged in a 14-SOIC package with 0.209 inch, or 5.30 mm, width. It is intended for conventional analog signal-conditioning, buffering, filtering, and instrumentation circuits rather than high-speed precision amplification.
What is the operating voltage of LM2902KNS?
The LM2902KNS supports a 3 V to 26 V supply range, with dual-supply operation also reflected by the 3 V to 26 V positive and -26 V to -3 V negative operating descriptions. The Texas Instruments product information identifies LM2902K as a 26 V quad operational amplifier. Actual signal amplitudes must also remain within the amplifier's specified common-mode and output-voltage limits, which should be confirmed in the complete manufacturer datasheet.
What is the gain-bandwidth product of LM2902KNS?
The LM2902KNS has a gain-bandwidth product of 1.2 MHz. According to the Texas Instruments LM2902K product information, this places the device in the general-purpose operational-amplifier class and supports applications such as audio-frequency amplification, buffering, filtering, and moderate-speed control loops. The bandwidth is not appropriate for high-frequency video, RF, or precision measurement paths that require substantially greater closed-loop bandwidth.
Where can I download the LM2902KNS datasheet PDF?
The LM2902KNS datasheet and ordering information are available through the Texas Instruments LM2902K product page at https://www.ti.com/product/LM2902K. The manufacturer page provides the authoritative electrical characteristics, package information, and ordering options for the LM2902K family. For a direct PDF search, use the official manufacturer page rather than relying on a third-party archive, then verify the package and suffix against the LM2902KNS ordering information.
Where can I find the LM2902KNS pinout?
The LM2902KNS pinout is defined by the 14-SOIC package and should be taken from the pin-description table in the Texas Instruments LM2902K datasheet. The package contains four operational-amplifier sections, with each section using its own non-inverting and inverting inputs, output, and supply pins. Because multiple sections share supply connections, assign PCB nets by following the manufacturer diagram exactly rather than inferring a generic SOIC-14 layout.
What is the difference between LM2902KNS and LM2902KNSR?
The LM2902KNS and LM2902KNSR use the same 14-SOIC footprint and share the same general-purpose quad-operational-amplifier function. The cross-reference description identifies LM2902KNSR as functionally and terminally compatible with LM2902KNS, allowing it to replace the device without PCB modification. The suffix difference generally identifies the ordering or packaging format, so verify the manufacturer's ordering information and reel or tube requirements before substitution.
Can LM2902KNSR replace LM2902KNS?
Yes, LM2902KNSR is a pin-compatible replacement candidate for LM2902KNS because it uses the same 14-SOIC package and the cross-reference description reports consistent terminals and performance characteristics. The Texas Instruments family page identifies both parts as 1.2 MHz, four-channel general-purpose amplifiers. Confirm temperature grade, supply limits, offset and bias-current limits, and packaging format in the manufacturer datasheet before production use.
What is the best drop-in replacement for LM2902KNS?
LM2902KNSR is the closest documented drop-in replacement because it is listed as a complete replacement with consistent performance and terminals in a 14-SOIC package. Other LM2902-family variants may share the footprint, but their suffix, temperature range, and order codes must be checked individually. For a replacement decision, compare the complete datasheet limits rather than relying only on amplifier count and bandwidth.
Is LM2902KNS suitable for industrial control and instrumentation?
The LM2902KNS is suitable for many industrial control and instrumentation functions because it combines four amplifiers, 1.2 MHz bandwidth, 26 V supply capability, and improved 2 kV ESD protection. It is particularly appropriate for slow sensor conditioning, buffer stages, active filters, and general feedback networks. Verify input common-mode range, output swing, output-current capability, noise, and stability with the actual load before using it in a precision or safety-critical loop.
Can I use LM2902KNS for audio or low-frequency signal amplification?
Yes, LM2902KNS can be used for many low-frequency audio and general analog signals because its gain-bandwidth product is 1.2 MHz and it provides four amplifiers in one package. Its 20 nA input bias current and 80 dB open-loop gain are useful for impedance-sensitive signal paths, while the 26 V supply rating supports higher-voltage circuits. Headphone or line-output designs must still be checked for output-current limit, distortion, stability, and load compatibility.
What is the LM2902KNS vs LM324 comparison?
The LM2902KNS is a 26 V, 1.2 MHz quad general-purpose operational amplifier, whereas LM324-family parts are commonly associated with lower supply-voltage and lower-bandwidth operation. A direct substitution also requires checking pinout, common-mode range, output swing, bias current, noise, and package. The verified comparison result identifies LM324 variants as comparison candidates, but it does not establish every LM324 package as a drop-in replacement.
When should I choose LM2902KNS over another quad op amp?
Choose LM2902KNS when the design needs four general-purpose amplifier sections, a 1.2 MHz gain-bandwidth product, 26 V supply capability, and improved 2 kV ESD protection in a 14-SOIC package. It is a practical choice for industrial sensing, buffering, control, and filtering when precision offset, very low noise, rail-to-rail output, and high slew rate are not primary requirements. Compare those requirements against the selected alternative before fixing the bill of materials.
Where can I buy LM2902KNS online?
LM2902KNS is available through major electronic-component distributors, but current price, stock, and lead time can change by quantity and date. Use the Request a Quote form on this XAIPART page to request current commercial terms for the exact LM2902KNS suffix and packaging configuration. Confirm the manufacturer, 14-SOIC package, order code, and delivery quantity before releasing a purchase order.
What is the price of LM2902KNS?
The LM2902KNS price depends on order quantity, packaging suffix, supplier inventory, and market conditions. XAIPART does not publish a static price in this technical description because prices are rendered dynamically by the platform and can become stale. Use the Request a Quote form on this page for a current unit price, quantity breaks, stock status, and estimated lead time for the exact LM2902KNS configuration.
What is the lead time and stock status for LM2902KNS?
Current LM2902KNS inventory and lead time depend on the supplier, package suffix, and order quantity. One distributor listing reported 5,072 pieces in stock and showed a delivery estimate of August 7 through August 12, but that observation is not a current availability guarantee. Request current stock and lead time through the Request a Quote form on this page before making a production commitment.
Is LM2902KNS RoHS and REACH compliant?
The manufacturer product information confirms the LM2902K family identity, but the verified LM2902KNS listing does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact suffix. Those compliance fields therefore remain unknown rather than assumed. Request the current manufacturer declaration or material compliance documentation for LM2902KNS through the Request a Quote form before using it in a regulated design.
How should I design the PCB around LM2902KNS?
Place the supply bypass capacitor close to the positive and negative supply pins, keep input and output traces short, and connect decoupling grounds through a low-impedance return path. Avoid routing high-current or switching-node traces beside amplifier inputs, where they can add coupling into the 1.2 MHz signal path. Use the manufacturer pin diagram and recommended-layout guidance for the 14-SOIC footprint, and verify stability with the intended resistive and capacitive loads.
Does the LM2902KNS support automotive applications?
The LM2902KNS is identified as a general-purpose 26 V quad amplifier, but automotive qualification for the exact LM2902KNS suffix is not established by the verified manufacturer information. Do not infer AEC-Q100 status from the device family or from industrial capability. Request the exact suffix qualification record and traceability documentation before using the part in an automotive design.
What is the role of the lm2902 onsemi cross-reference?
The search suggestion "lm2902 onsemi" points engineers toward comparing the LM2902 family with onsemi implementations, not toward a guaranteed drop-in substitute. An LM2902-family device from another manufacturer may use a related 14-pin footprint, but compatibility must be confirmed through pinout, supply range, common-mode limits, output swing, offset, bias current, noise, slew rate, and package drawings. Treat an unqualified family-level match as a candidate, not an automatic replacement.

נתוני עזר הנדסיים עבור LM2902KNS — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LM2902KNS when a design needs four general-purpose amplifier sections, 1.2 MHz bandwidth, a 26 V-class supply, and improved 2 kV ESD protection in a standard 14-SOIC package. It is a practical fit for industrial sensor conditioning, audio-frequency filtering, acquisition buffering, and moderate-speed feedback loops. Select LM2902KNSR when that same electrical and pin configuration is needed with the alternate TI ordering suffix; the documented terminal and package consistency makes it the strongest drop-in candidate. LM2902KNSRG4 and LM2902K/NS are additional same-family ordering candidates for procurement, subject to manufacturer ordering-code review. Consider LM2902DG when sourcing a second-source LM2902-family implementation is valuable, but verify its complete electrical limits and exact pinout. LM324ADG is a same-package comparison candidate for lower-bandwidth general-purpose designs, but it should not replace LM2902KNS without confirming common-mode range, offset, noise, output swing, and slew rate.

השוואה עם חלופות

פרמטר מוצר זה LM2902KNSR LM2902KNSRG4 LM2902K/NS LM2902DG LM324ADG
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi Texas Instruments
Amplifier Configuration Quad Quad Quad Quad Quad Quad
Special Features Quad general-purpose amplifier with improved 2 kV ESD Complete replacement with consistent terminals and package LM2902K-family ordering variant LM2902K-family ordering variant LM2902-family alternative LM324-family comparison candidate

מבדילים עיקריים

  • Documented terminal and package compatibility (לעומתLM2902KNSR)
  • Higher-bandwidth general-purpose quad amplifier position (לעומתLM324ADG)
  • Improved ESD capability (לעומתLM2902DG)
  • Four channels in one conventional surface-mount package (לעומתLM2902KNSR)

הערות תכנון

Place the supply bypass capacitor as close as practical to the positive and negative supply pins, and use a short, low-impedance ground connection. Keep amplifier input traces away from switching nodes, relay contacts, and high-current outputs because the 1.2 MHz device can respond to interference that is harmless to slower circuits. Follow the Texas Instruments pin-description table when assigning the shared supply pins and verify the PCB land pattern against the 14-SOIC dimensions before fabrication.

Do not assume that a 26 V maximum supply rating makes every input and output swing acceptable at 26 V. Check the datasheet input common-mode range and output-voltage limits under the actual dual- or single-supply configuration. Also confirm output-current capability for low-impedance loads. The 20 nA input-bias-current value is suitable for many high-impedance sources, but bias-current return error and source-impedance noise can still degrade precision measurements.

Configure every unused amplifier section according to the manufacturer guidance rather than leaving its inputs floating. A stable configuration prevents unintended oscillation and reduces noise coupling. When substituting another 14-SOIC quad amplifier, verify that power pins, input pins, output pins, and exposed functionality align; the same package count alone does not establish pin compatibility or equivalent DC and AC performance.

Estimate each amplifier section's dissipation from its supply voltage, quiescent current, and load current before designing the power rail. Estimated: using a 26 V single supply, 0.5 uA quiescent current, and 1 mA load current, the device dissipation is approximately 26 V times 0.5005 mA, or 13.0 mW. This estimate excludes resistor-network losses and should be recalculated for the actual operating state.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified manufacturer and distributor information does not explicitly state compliance for the exact LM2902KNS suffix. Obtain current manufacturer declarations before using the device in a regulated design.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

lm2902 onsemi LM2902KNS datasheet LM2902KNS datasheet pdf LM2902KNS pinout LM2902KNS 14-SOIC LM2902KNS 26V amplifier LM2902KNS 1.2MHz LM2902KNS equivalent LM2902KNS replacement LM2902KNS vs LM2902KNSR LM2902KNS application circuit Texas Instruments LM2902KNS LM2902KNS price LM2902KNS stock

רכיבים ומונחים קשורים

Texas Instruments LM2902KNS LM2902KNSR LM2902KNSRG4 LM2902K/NS LM2902DG onsemi LM324ADG LM324ANSR quad operational amplifier operational amplifier analog amplifier semiconductor 14-SOIC SOIC family surface-mount package SMD gain-bandwidth product input bias current quiescent current open-loop gain ESD protection industrial sensor conditioning active filtering feedback control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר