LM2902KNS - 26V Quad 1.2MHz Op Amp | Texas Instruments
MPN: LM2902KNS ✓ Hoạt độngLM2902KNS Tóm tắt
An operational amplifier is a voltage amplifier with very high open-loop gain, allowing it to amplify small signals when used with external negative feedback. A quad operational amplifier contains four amplifier sections in one package, providing a convenient way to implement several analog functions while reducing the number of components on a circuit board. The LM2902K belongs to the broader operational-amplifier category, which is part of the linear and analog semiconductor hierarchy.
Key characteristics include four amplifier channels, a 1.2 MHz gain-bandwidth product, 26 V maximum supply capability, 20 nA input bias current, 80 dB open-loop gain, and approximately 0.5 uA quiescent current. The improved 2 kV ESD rating provides additional device protection in applications where exposed handling or connector-connected signals may introduce electrostatic transients. The 14-SOIC package is a conventional surface-mount package suited to conventional PCB assembly methods.
The LM2902KNS is intended for general-purpose analog applications rather than precision or high-speed signal-chain work. Its 1.2 MHz bandwidth is appropriate for audio-frequency, control, and instrumentation circuits where moderate operating speed and wide supply-voltage tolerance are more important than very high slew rate or extremely low offset voltage. The 26 V supply capability also makes it useful in circuits operating from higher-voltage industrial rails, provided the amplifier inputs and outputs remain within their permitted common-mode and output ranges.
Typical uses include four-channel sensor amplification, voltage buffering, active filtering, differential sensing, comparator-style threshold conditioning, and general feedback control. In a multi-amplifier design, the common package helps keep channel-to-channel placement compact, although each amplifier should still be evaluated for output-current capability, load impedance, stability, and noise performance in its intended circuit.
Designers should review the manufacturer datasheet for the complete electrical characteristics, recommended operating conditions, input and output limits, and package details. Decoupling capacitors should be placed close to the supply pins, unused amplifier sections should be configured according to the datasheet guidance, and input and output signals should not exceed the specified common-mode and output-voltage limits. This page summarizes the principal LM2902KNS characteristics and identifies drop-in alternatives with the same 14-SOIC footprint for engineering evaluation.
The information on this page combines the manufacturer product identification, distributor package and inventory descriptions, and cross-reference findings for LM2902KNS. It is intended to help engineers narrow the component choice, verify the package, and plan a replacement strategy before completing detailed circuit validation.
Bộ thay thế dễ dàng lắp đặt cho LM2902KNS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2902KNS (cùng hình factor và footprint) — khác nhau ở Maximum Supply Voltage, Package, Gain-Bandwidth Product, Amplifier Type, Number of Amplifier Channels.
LM2902KNSRG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2902KNSRG4
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →LM2902K/NS
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LM2902DG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM324ADG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2902KNS Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 circuits |
| Maximum Supply Voltage | 26 V |
| Supply Voltage Range | 3 V to 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Input Bias Current | 20 nA |
| Điện áp yên tĩnh | 0.5 uA |
| Open-Loop Gain | 80 dB |
| ESD Protection | 2 kV improved ESD |
| Hộp | 14-SOIC, 0.209 inch, 5.30 mm width |
| Kiểu lắp đặt | Surface mount |
| Operating Voltage, Positive | 3 V to 26 V |
| Operating Voltage, Negative | -26 V to -3 V |
| Khoảng điện áp đầu ra | Approximately -13 V to +13 V |
Cấu hình chân LM2902KNS
| Chân 1 | 1OUT — Output of amplifier 1 |
| Chân 2 | 1IN- — Inverting input of amplifier 1 |
| Chân 3 | 1IN+ — Non-inverting input of amplifier 1 |
| Chân 4 | V+ — Positive supply voltage |
| Chân 5 | 2IN+ — Non-inverting input of amplifier 2 |
| Chân 6 | 2IN- — Inverting input of amplifier 2 |
| Chân 7 | 2OUT — Output of amplifier 2 |
| Chân 8 | 3OUT — Output of amplifier 3 |
| Chân 9 | 3IN- — Inverting input of amplifier 3 |
| Chân 10 | 3IN+ — Non-inverting input of amplifier 3 |
| Chân 11 | V- — Negative supply voltage |
| Chân 12 | 4IN+ — Non-inverting input of amplifier 4 |
| Chân 13 | 4IN- — Inverting input of amplifier 4 |
| Chân 14 | 4OUT — Output of amplifier 4 |
Ứng dụng tiêu biểu
LM2902KNS phù hợp cho 6 Áp dụngs: Industrial Sensor Signal Conditioning, Active Audio Filtering, Data Acquisition Buffering, Power Supply Control Loops, Voltage Level Interfaces, General Feedback Control.
Industrial Sensor Signal Conditioning
The LM2902KNS fits industrial sensor-conditioning circuits that amplify low-level signals and require several amplifier sections on a single board. Its four 1.2 MHz channels can support non-inverting and inverting gain stages, input buffering, and active-filter elements, while the 26 V supply capability accommodates higher-voltage industrial control environments. A practical arrangement might use one channel for sensor amplification, one for gain trim, and two for filtering or output conditioning. The design should verify the 20 nA input-bias-current requirement against sensor impedance and confirm input common-mode limits, output swing, and stability with the connected load before production deployment.
Được đề xuất
Active Audio Filtering
LM2902KNS can implement active filters and small-signal audio stages where four general-purpose amplifiers provide more flexibility than a single package. Its 1.2 MHz gain-bandwidth product offers substantially more bandwidth than low-frequency filter sections generally require, allowing useful closed-loop gain in the audio region. The 14-SOIC package simplifies assembly where conventional surface-mount op amps are preferred. Engineers should still check distortion, output-current capability, output swing, noise, and capacitive-load stability for the actual speaker-line or line-level network, especially when driving a low-impedance load.
Được đề xuất
Data Acquisition Buffering
The four channels in LM2902KNS are useful for buffering multiplexed sensors, transducers, or dividers before an analog-to-digital converter. A 20 nA input-bias-current characteristic helps preserve accuracy when driving high-impedance sources, while 1.2 MHz bandwidth supports moderately fast settling in many acquisition paths. The amplifier can be arranged as a unity-gain voltage follower or as part of a differential front end. For precision systems, verify input offset, input voltage noise, common-mode range, settling behavior, and channel matching against the converter’s acquisition requirements rather than treating general-purpose performance as precision performance.
Được đề xuất
Power Supply Control Loops
LM2902KNS can implement error amplifiers, comparators, and feedback elements in industrial control and power-conversion systems requiring a 26 V-class amplifier. Four channels allow one section to monitor a feedback voltage, another to amplify an error signal, and additional sections to supervise signals or drive control stages. The 1.2 MHz bandwidth can respond to loop dynamics beyond very slow regulation loops, although compensation and stability must be evaluated with the switching stage and compensation network. Verify output-current capability and output-voltage limits before using any section to directly drive a transistor or load.
Được đề xuất
Voltage Level Interfaces
LM2902KNS is suitable for voltage-level interfaces between higher-voltage industrial signals and lower-voltage control electronics when the signal stays within the amplifier’s common-mode limits. Its 26 V supply capability provides more operating headroom than low-voltage-only amplifier families, and the four-channel package can implement several interface functions. A practical design may use two sections for differential attenuation and two for buffering or level translation. Because it is not a rail-to-rail precision amplifier, the engineer must verify both input common-mode range and output swing across temperature and supply tolerance.
Được đề xuất
General Feedback Control
The four LM2902KNS amplifier sections support feedback-control, threshold, and error-amplification functions in instrumentation and embedded control systems. A 1.2 MHz gain-bandwidth product is useful for control paths faster than static comparators but well within the capabilities of the device’s general-purpose architecture. Multiple sections can implement command conditioning, position feedback, and output buffering in one package. Confirm loop stability, output slew behavior, load drive, and permissible output voltage for each channel. The 20 nA bias-current value should also be checked when feedback sources have substantial source impedance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM2902KNS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LM2902KNSR | LM2902KNSRG4 | LM2902K/NS | LM2902DG | LM324ADG |
|---|---|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | Texas Instruments |
| Amplifier Configuration | Quad | Quad | Quad | Quad | Quad | Quad |
| Special Features | Quad general-purpose amplifier with improved 2 kV ESD | Complete replacement with consistent terminals and package | LM2902K-family ordering variant | LM2902K-family ordering variant | LM2902-family alternative | LM324-family comparison candidate |
Bảo phân biệt quan trọng
- Documented terminal and package compatibility (vsLM2902KNSR)
- Higher-bandwidth general-purpose quad amplifier position (vsLM324ADG)
- Improved ESD capability (vsLM2902DG)
- Four channels in one conventional surface-mount package (vsLM2902KNSR)
Ghi chú thiết kế
Place the supply bypass capacitor as close as practical to the positive and negative supply pins, and use a short, low-impedance ground connection. Keep amplifier input traces away from switching nodes, relay contacts, and high-current outputs because the 1.2 MHz device can respond to interference that is harmless to slower circuits. Follow the Texas Instruments pin-description table when assigning the shared supply pins and verify the PCB land pattern against the 14-SOIC dimensions before fabrication.
Do not assume that a 26 V maximum supply rating makes every input and output swing acceptable at 26 V. Check the datasheet input common-mode range and output-voltage limits under the actual dual- or single-supply configuration. Also confirm output-current capability for low-impedance loads. The 20 nA input-bias-current value is suitable for many high-impedance sources, but bias-current return error and source-impedance noise can still degrade precision measurements.
Configure every unused amplifier section according to the manufacturer guidance rather than leaving its inputs floating. A stable configuration prevents unintended oscillation and reduces noise coupling. When substituting another 14-SOIC quad amplifier, verify that power pins, input pins, output pins, and exposed functionality align; the same package count alone does not establish pin compatibility or equivalent DC and AC performance.
Estimate each amplifier section's dissipation from its supply voltage, quiescent current, and load current before designing the power rail. Estimated: using a 26 V single supply, 0.5 uA quiescent current, and 1 mA load current, the device dissipation is approximately 26 V times 0.5005 mA, or 13.0 mW. This estimate excludes resistor-network losses and should be recalculated for the actual operating state.
Thông tin tuân thủ
The verified manufacturer and distributor information does not explicitly state compliance for the exact LM2902KNS suffix. Obtain current manufacturer declarations before using the device in a regulated design.