Texas Instruments

LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments

MPN: LM2902NS-MAND ✓ פעיל
26 V Vdss 14-pin SO Package
כמות הזמנה מינימלית: 1 |

LM2902NS-MAND סקירה

The Texas Instruments LM2902NS-MAND is a general-purpose quad operational amplifier with four amplifier circuits in a 14-pin SO package. The LM2902-N family operates from a single supply up to 26 V, delivers a gain-bandwidth product of 1 MHz, and is designed for general-purpose signal conditioning across industrial, automotive, and embedded applications. Its four independent channels allow multiple analog signals to be amplified within one compact package.

An operational amplifier, commonly called an op amp, is a high-gain analog building block used in voltage amplification, filtering, buffering, comparison, and feedback-control circuits. The LM2902 belongs to the voltage-feedback operational-amplifier family, within the broader linear and power-management semiconductor hierarchy. Its integrated amplifier circuits depend on stable supply rails and carefully selected external feedback components.

The headline features of the LM2902NS-MAND are its four-circuit configuration, 26 V maximum supply rating, and 1 MHz gain-bandwidth product. The integrated quad arrangement reduces the number of packages and PCB connections required when several low-frequency analog functions must be implemented. The 14-pin SO package also supports conventional surface-mount assembly methods used in high-volume electronic assemblies.

The LM2902-N family provides practical performance for general-purpose analog designs rather than specialized low-noise or high-speed operation. A 1 MHz gain-bandwidth product is appropriate for audio-frequency signal paths, sensor conditioning, error amplifiers, and control loops that do not require the bandwidth of modern rail-to-rail precision amplifiers. Its 26 V supply capability also allows operation from higher-voltage rails than conventional 5 V or 3.3 V analog systems.

Typical uses include four-channel sensor interfaces, buffered instrumentation inputs, industrial control signals, automotive electronics, audio preamplification, and general feedback-control blocks. In a typical circuit, each channel uses external resistors or capacitors to define gain, filtering, or integration behavior. Power-supply bypassing remains important because every amplifier channel shares the same package and supply pins.

For new layouts, check the complete pin-description and recommended operating tables in the manufacturer datasheet before assigning connections. Keep input and output traces away from switching nodes, provide local supply bypassing, and verify common-mode, output-swing, and stability limits across the intended supply range. The quad package is especially useful when matched channel count and board area matter more than precision or rail-to-rail operation.

This product overview combines the device architecture with practical application guidance, package information, sourcing details, and a comparison of documented drop-in alternatives. It also identifies where engineers must review the exact orderable suffix, supply conditions, and channel-level electrical limits before releasing a production design.

חלופות תחליף ישיר עבור LM2902NS-MAND — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM2902NS-MAND (אותו גורם צורה וטביעת רגל) — שונים ב RoHS Status, Amplifier Type, Number of Channels, Package.

Texas Instruments
RoHS Status: unknown
Package: 14-SOIC
השווה עם LM2902NS-MAND →
Texas Instruments
Amplifier Type: General Purpose
Number of Channels: 4
Package: SOIC (D), 14 pins
השווה עם LM2902NS-MAND →

LM2902-N

✅ Drop-In
📦 14-SO
Family-level designation has the same 4-channel, 26 V, and 1 MHz ratings; confirm the exact temperature grade and ordering suffix before substitution

📋 חלופה להתייחסות (לא בקטלוג)

LM2902B

✅ Drop-In
📦 14-SO
Upgraded LM2902 family with a documented 36 V class supply range versus 26 V for LM2902NS-MAND; same pin-to-pin family upgrade

📋 חלופה להתייחסות (לא בקטלוג)

LM324BAIDR

✅ Drop-In
Texas Instruments
📦 14-SO
4 · 3 V to 36 V · 1.2 MHz · 2 mV (max, BA version) · Push-Pull · -40C to +85C · SOIC (D), 14 pins · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902D

✅ Drop-In
Texas Instruments
📦 14-SO
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902NS-MAND דירוגים מרביים ומאפיינים חשמליים

Amplifier Type General-purpose voltage-feedback operational amplifier
Number of Channels 4 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1 MHz
Package Type 14-pin SO
מספר פינים 14 pins
סוג הרכבה Surface mount
Product Family LM2902-N
סטטוס RoHS Compliant
סטטוס מחזור חיים Active product family

מדריך תצורת פינים של LM2902NS-MAND 14-pin so

תצורת פינים עבור LM2902NS-MAND (מארזת 14-pin so). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 14-pin so עבור LM2902NS-MAND

אין נתוני פריסת פינים מפורטים עבור LM2902NS-MAND.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM2902NS-MAND מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Automotive Electronic Control, Audio Preamplification, Power Supply Control Loops, Instrumentation Buffering, Data Acquisition Front Ends.

🏭

Industrial Sensor Signal Conditioning

The LM2902NS-MAND fits four-channel industrial sensor conditioning because each amplifier can provide independent gain, buffering, or active filtering without requiring separate packages. Its 1 MHz gain-bandwidth product is suitable for many pressure, temperature, position, and process-control signals operating well below that bandwidth. The 26 V maximum supply rating also permits use in 24 V industrial systems with appropriate regulation. Place the device close to the sensor interface, bypass the supply pins locally, and use separate feedback networks for each channel. Verify the common-mode and output-swing limits before amplifying sensor outputs because the family is intended for general-purpose rather than rail-to-rail operation.

🚗

Automotive Electronic Control

The LM2902NS-MAND is suitable for low-frequency automotive electronic-control functions when the selected orderable suffix satisfies the required temperature and qualification criteria. Four independent channels can condition sensor inputs, support actuator drivers, or implement control-loop amplifiers within one 14-pin SO package. The 26 V supply rating is compatible with many 12 V automotive rails, while the 1 MHz gain-bandwidth product supports signals below its practical bandwidth. Keep sensitive analog traces away from relays, motor drivers, and inductive switching nodes, and include local supply bypassing. Confirm the automotive requirements, transient exposure, and common-mode limits in the manufacturer datasheet before production release.

🎧

Audio Preamplification

The LM2902NS-MAND can implement multiple low-frequency audio preamplifier stages when its 1 MHz gain-bandwidth product provides adequate closed-loop bandwidth and slew-rate margin. The quad configuration is useful for stereo or multi-zone audio boards because it reduces package count and simplifies routing between input stages and volume-control networks. The 26 V supply capability permits higher-voltage analog rails than a conventional 5 V implementation, although it does not guarantee full output swing at the rails. Use stable feedback values, maintain quiet supply decoupling, and route high-current audio outputs separately from sensitive input traces. Validate distortion and stability across the intended audio band before selecting the amplifier.

⚡

Power Supply Control Loops

The LM2902NS-MAND can serve as an error amplifier or auxiliary control amplifier in non-isolated power-supply and feedback-control systems. Its 1 MHz bandwidth is appropriate for many slow voltage or current control loops, while four channels allow one controller to be combined with current sensing, soft-start assistance, and monitoring functions. A 26 V maximum supply rating supports higher-voltage control platforms. The amplifier does not replace a dedicated power-management controller, so compensation, output drive, and stability must be evaluated with the power stage. Keep the feedback node compact, use low-tolerance resistors where accuracy matters, and verify transient response using the complete power-stage model rather than the amplifier alone.

🔧

Instrumentation Buffering

The LM2902NS-MAND is useful for buffering high-impedance instrumentation sources before they enter measurement or conversion circuitry. Four channels can support multiple sensor outputs, and the 1 MHz gain-bandwidth product is generally adequate for sensors and test signals with bandwidth below the amplifier’s closed-loop capability. In voltage-follower service, the high input impedance limits loading while the low output impedance helps drive the following stage. Avoid placing long unprotected input routes next to switching circuitry, and provide clean references and supply bypassing. Confirm the exact input-bias-current, offset-voltage, common-mode, and output-swing values in the datasheet when precision measurement performance is required.

📟

Data Acquisition Front Ends

The LM2902NS-MAND can implement four analog front-end channels for multiplexed sensors, resistance measurement, or low-speed data-acquisition systems. Each channel can amplify, invert, scale, or filter a sensor signal, while the 26 V-rated supply supports instrumentation that operates above conventional 5 V rails. The 1 MHz gain-bandwidth product handles many low-speed acquisition signals but does not replace a dedicated high-speed ADC driver. Maintain short feedback paths, use a quiet reference for dividers, and decouple the supply close to the package. Verify settling behavior, output drive, and noise performance against the acquisition system’s bandwidth and required measurement accuracy.

סיכום מוצרים מומלצים

LM2902-N Four-channel amplifier family for industrial signal conditioning בשימוש ב-: Industrial Sensor Signal Conditioning, Automotive Electronic Control, Audio Preamplification, Power Supply Control Loops, Instrumentation Buffering, Data Acquisition Front Ends LM2902 General-purpose quad amplifier family option בשימוש ב-: Industrial Sensor Signal Conditioning, Audio Preamplification, Instrumentation Buffering LM2902B Upgraded drop-in family for higher-voltage applications בשימוש ב-: Automotive Electronic Control, Power Supply Control Loops LM324B Documented 36 V class drop-in family member בשימוש ב-: Data Acquisition Front Ends
What is the LM2902NS-MAND?
The LM2902NS-MAND is a Texas Instruments quad general-purpose operational amplifier with four amplifier circuits, a 26 V maximum supply rating, and a 1 MHz gain-bandwidth product in a 14-pin SO package. According to the LM2902-N manufacturer product page, it is intended for standard low-frequency analog signal-conditioning applications where four channels and higher-voltage supply operation are valuable.
What are the key specifications of LM2902NS-MAND that engineers should know?
The LM2902NS-MAND combines four general-purpose operational-amplifier channels, a 26 V maximum supply voltage, and a 1 MHz gain-bandwidth product in one 14-pin SO package. The Texas Instruments LM2902-N product information identifies it as a standard amplifier family intended for general-purpose applications. Review the exact suffix electrical tables before using it where rail-to-rail input or output operation is required.
Where can I download the LM2902NS-MAND datasheet PDF?
The authoritative LM2902NS-MAND documentation is reached through the Texas Instruments LM2902-N product page at https://www.ti.com/product/LM2902-N. From that page, open the datasheet link for the specific NS package and MAND ordering suffix. This is preferable to relying on a distributor copy because it provides the current revision, ordering information, pin descriptions, and electrical characteristics.
Where can I find the LM2902NS-MAND pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2902-N datasheet to locate the LM2902NS-MAND pinout. The device uses a 14-pin SO package, so the four channels require consistent input, output, supply, and ground assignments. The product page provides access to the relevant datasheet, while a complete pin-level table is not reproduced on this page.
Is the LM2902NS-MAND suitable for 24 V industrial circuits?
The LM2902NS-MAND can suit nominal 24 V industrial signal-conditioning systems because the LM2902-N family supports supplies up to 26 V. That rating does not mean every output can reach 26 V or accept every input voltage. Use the datasheet common-mode and output-swing limits, maintain adequate supply decoupling, and design the feedback network for the selected operating voltage.
Can LM2902NS-MAND replace LM2902-N in a circuit?
The LM2902NS-MAND is an orderable version within the Texas Instruments LM2902-N family, so its suitability as a replacement depends on the package, temperature grade, and suffix-specific ratings being identical to the installed device. Confirm those fields before substitution. According to the LM2902-N manufacturer product page, this family is a 26 V, 1 MHz, four-channel amplifier in a 14-pin SO package.
What is the best drop-in replacement for LM2902NS-MAND?
The closest documented drop-in choices are the 14-pin SO members of the LM2902 and LM2902B families, but the final selection must preserve the required supply rating, temperature grade, and exact pin configuration. Texas Instruments states that LM2902B can drop-in replace LM2902-family devices with upgraded functionality. No cross-brand equivalent is presented as verified for the exact MAND suffix.
What can replace LM2902NS-MAND without changing the PCB?
A PCB-compatible replacement must use the same 14-pin SO footprint and provide equivalent amplifier-channel functions and electrical limits. The documented TI options are the LM2902 family and the upgraded LM2902B family; the manufacturer specifically identifies LM2902B as a drop-in replacement for LM2902 devices. Verify operating temperature, supply limits, offset, and stability requirements before releasing a substitution.
LM2902NS-MAND vs LM2902B: which is better for an upgrade?
Choose LM2902B when its 36 V class supply capability and upgraded functionality are required; the manufacturer identifies it as a drop-in replacement for LM2902-family devices. Choose LM2902NS-MAND when the existing design intentionally uses the 26 V LM2902-N family. Both are general-purpose quad amplifiers, but the final part number must match the package and electrical grade required by the design.
When should I choose LM2902NS-MAND over LM2902B?
Choose LM2902NS-MAND when a 26 V-rated, 1 MHz general-purpose quad amplifier in a 14-pin SO package is sufficient and the design does not require the newer family’s expanded voltage capability. Select LM2902B when the application needs its documented 36 V-class operating range or upgraded functionality. Both options should be checked for temperature grade and exact pin compatibility before substitution.
Is LM2902NS-MAND suitable for sensor and transducer interfaces?
Yes, the LM2902NS-MAND is suitable for many low-frequency sensor and transducer interfaces because it provides four general-purpose channels, a 1 MHz gain-bandwidth product, and operation from a supply rated up to 26 V. Use one channel as a voltage follower when the sensor has a high source impedance, and add filtering where sensor noise or bandwidth must be controlled.
Where can I buy LM2902NS-MAND and check its lead time?
Use the Request a Quote form on this page to ask about LM2902NS-MAND availability, current lead time, minimum order quantity, and exact package and suffix requirements. Stock status can change independently of the product’s lifecycle, so request the quantity and date needed for your production schedule. The manufacturer currently presents the LM2902-N family as an active product.
How much does LM2902NS-MAND cost?
The current unit price for LM2902NS-MAND depends on order quantity, package suffix, inventory position, and purchasing terms. Submit the required quantity through the Request a Quote form on this page for a current quotation. The manufacturer identifies the device as a 26 V, 1 MHz quad operational amplifier in a 14-pin SO package, allowing the quotation request to use the exact ordering information.
Is LM2902NS-MAND in stock?
Inventory for LM2902NS-MAND can vary by order quantity and fulfillment schedule even though the LM2902-N family is active. Use the Request a Quote form on this page and state the required quantity, delivery date, and acceptable packaging for the LM2902NS-MAND order. The manufacturer’s active-family listing confirms product continuity, but it does not establish current warehouse stock.
What is the best Onsemi equivalent for LM2902NS-MAND?
No verified Onsemi equivalent for the exact LM2902NS-MAND ordering suffix is identified. A candidate must match the 14-pin SO footprint, preserve the four-channel pin arrangement, and satisfy the required supply, offset, current, and temperature limits before it can be called a drop-in replacement. Request engineering confirmation rather than treating a similar quad amplifier as an automatically interchangeable part.

נתוני עזר הנדסיים עבור LM2902NS-MAND — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LM2902NS-MAND for a general-purpose four-channel analog design that uses a 14-pin SO footprint, a supply rated up to 26 V, and signals compatible with a 1 MHz gain-bandwidth product. It is a practical choice for industrial sensor interfaces, audio preamplification, control loops, and instrumentation buffering when a precision or rail-to-rail amplifier is unnecessary. Select LM2902B when the manufacturer’s documented drop-in upgrade and expanded 36 V class capability are required. Consider LM324B when its upgraded-family functionality fits the design, after checking offset, bandwidth, and channel-level limits. The legacy LM2902 offers a documented 1.2 MHz gain-bandwidth product with the same 26 V class rating, but it may represent a different orderable grade. For every substitution, verify the exact package, temperature range, electrical limits, lifecycle status, and pin arrangement before releasing production artwork.

השוואה עם חלופות

פרמטר מוצר זה LM2902-N LM2902B LM324B LM2902
Package 14-SO 14-SO 14-SO 14-SO 14-SO
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Amplifier Channels 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Maximum Supply Voltage 26 V 26 V 36 V class 36 V class 26 V
Product Family LM2902-N LM2902-N LM2902B upgraded family LM324B upgraded family LM2902 legacy family
Drop-In Relationship Original device Same 14-pin SO family Drop-in replacement with upgraded functionality Drop-in replacement for LM2902-family devices Same LM2902 family

מבדילים עיקריים

  • Four independent general-purpose amplifier channels in one package (לעומתLM324B)
  • A documented upgrade path for higher-voltage designs (לעומתLM2902B)
  • Matches the legacy LM2902 family supply rating (לעומתLM2902)
  • Single-package channel consolidation (לעומתLM2902-N)

הערות תכנון

Decouple the LM2902NS-MAND supply pins close to the package and route the return current through a quiet ground plane. The four amplifier channels share package supply pins, so supply disturbance can affect every channel simultaneously. Review the manufacturer’s recommended capacitor values and voltage-derating requirements before fixing the placement because the exact capacitor recommendation for the MAND suffix must be taken from the complete ordering documentation.

Keep each op-amp input and feedback path short and separate from output, relay, motor, and switching-node traces. The LM2902-N has a 1 MHz gain-bandwidth product, so incorrect high-impedance feedback routing can introduce oscillation or unexpected bandwidth behavior. Use a solid ground reference, minimize loop area around the amplifier pins, and use a ground guard or shielding strategy if a high-impedance source is physically adjacent to noisy circuitry.

Do not assume that a 26 V maximum supply rating permits operation with the output or input at either rail. Check the LM2902NS-MAND common-mode input range, output-swing limits, supply-current behavior, and thermal conditions in the manufacturer datasheet. The family is a general-purpose amplifier rather than a guaranteed rail-to-rail part, so headroom errors can cause clipping, offset, distortion, or loss of regulation.

Estimated: amplifier dissipation depends on the actual supply voltage, quiescent current, load, output swing, and ambient temperature. Calculate Pdissipated from those operating values, compare the resulting junction temperature with the package and device limits, and provide copper area appropriate to the 14-pin SO footprint. This is an engineering estimate rather than a fixed datasheet power rating because the final calculation is specific to each design’s loading and supply conditions.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LM2902NS-MAND is described as a RoHS-compliant four-channel operational amplifier. Confirm automotive qualification and other regional material declarations for the exact MAND suffix.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

lm2902n datasheet LM2902NS-MAND datasheet LM2902NS-MAND datasheet pdf LM2902NS-MAND pinout LM2902NS-MAND specifications LM2902NS-MAND equivalent LM2902NS-MAND replacement LM2902NS-MAND cross reference LM2902NS-MAND vs LM2902B LM2902NS-MAND price LM2902NS-MAND stock Texas Instruments LM2902NS-MAND

רכיבים ומונחים קשורים

Texas Instruments LM2902NS-MAND LM2902-N LM2902B LM324B LM2902 operational amplifier op amp quad amplifier voltage-feedback amplifier analog signal conditioning gain-bandwidth product 26 V 1 MHz 14-pin SO SOIC-14 surface-mount package semiconductor industrial control automotive electronics audio preamplifier sensor interface RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר