LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments
MPN: LM2902NS-MAND ✓ فعالLM2902NS-MAND جائزہ
An operational amplifier, commonly called an op amp, is a high-gain analog building block used in voltage amplification, filtering, buffering, comparison, and feedback-control circuits. The LM2902 belongs to the voltage-feedback operational-amplifier family, within the broader linear and power-management semiconductor hierarchy. Its integrated amplifier circuits depend on stable supply rails and carefully selected external feedback components.
The headline features of the LM2902NS-MAND are its four-circuit configuration, 26 V maximum supply rating, and 1 MHz gain-bandwidth product. The integrated quad arrangement reduces the number of packages and PCB connections required when several low-frequency analog functions must be implemented. The 14-pin SO package also supports conventional surface-mount assembly methods used in high-volume electronic assemblies.
The LM2902-N family provides practical performance for general-purpose analog designs rather than specialized low-noise or high-speed operation. A 1 MHz gain-bandwidth product is appropriate for audio-frequency signal paths, sensor conditioning, error amplifiers, and control loops that do not require the bandwidth of modern rail-to-rail precision amplifiers. Its 26 V supply capability also allows operation from higher-voltage rails than conventional 5 V or 3.3 V analog systems.
Typical uses include four-channel sensor interfaces, buffered instrumentation inputs, industrial control signals, automotive electronics, audio preamplification, and general feedback-control blocks. In a typical circuit, each channel uses external resistors or capacitors to define gain, filtering, or integration behavior. Power-supply bypassing remains important because every amplifier channel shares the same package and supply pins.
For new layouts, check the complete pin-description and recommended operating tables in the manufacturer datasheet before assigning connections. Keep input and output traces away from switching nodes, provide local supply bypassing, and verify common-mode, output-swing, and stability limits across the intended supply range. The quad package is especially useful when matched channel count and board area matter more than precision or rail-to-rail operation.
This product overview combines the device architecture with practical application guidance, package information, sourcing details, and a comparison of documented drop-in alternatives. It also identifies where engineers must review the exact orderable suffix, supply conditions, and channel-level electrical limits before releasing a production design.
کے لیے ڈراپ اِن متبادل LM2902NS-MAND — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902NS-MAND (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف RoHS Status, Amplifier Type, Number of Channels, Package.
LM2902-N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2902B
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM324BAIDR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902D
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902NS-MAND زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | General-purpose voltage-feedback operational amplifier |
| Number of Channels | 4 circuits |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 1 MHz |
| Package Type | 14-pin SO |
| پن کی تعداد | 14 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Product Family | LM2902-N |
| RoHS اسٹیٹس | Compliant |
| لائف سائیکل کی حالت | Active product family |
LM2902NS-MAND 14-pin so پن کنفیگریشن گائیڈ
LM2902NS-MAND (14-pin so پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2902NS-MAND.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LM2902NS-MAND کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Automotive Electronic Control, Audio Preamplification, Power Supply Control Loops, Instrumentation Buffering, Data Acquisition Front Ends.
Industrial Sensor Signal Conditioning
The LM2902NS-MAND fits four-channel industrial sensor conditioning because each amplifier can provide independent gain, buffering, or active filtering without requiring separate packages. Its 1 MHz gain-bandwidth product is suitable for many pressure, temperature, position, and process-control signals operating well below that bandwidth. The 26 V maximum supply rating also permits use in 24 V industrial systems with appropriate regulation. Place the device close to the sensor interface, bypass the supply pins locally, and use separate feedback networks for each channel. Verify the common-mode and output-swing limits before amplifying sensor outputs because the family is intended for general-purpose rather than rail-to-rail operation.
تجویز کردہ
Automotive Electronic Control
The LM2902NS-MAND is suitable for low-frequency automotive electronic-control functions when the selected orderable suffix satisfies the required temperature and qualification criteria. Four independent channels can condition sensor inputs, support actuator drivers, or implement control-loop amplifiers within one 14-pin SO package. The 26 V supply rating is compatible with many 12 V automotive rails, while the 1 MHz gain-bandwidth product supports signals below its practical bandwidth. Keep sensitive analog traces away from relays, motor drivers, and inductive switching nodes, and include local supply bypassing. Confirm the automotive requirements, transient exposure, and common-mode limits in the manufacturer datasheet before production release.
تجویز کردہ
Audio Preamplification
The LM2902NS-MAND can implement multiple low-frequency audio preamplifier stages when its 1 MHz gain-bandwidth product provides adequate closed-loop bandwidth and slew-rate margin. The quad configuration is useful for stereo or multi-zone audio boards because it reduces package count and simplifies routing between input stages and volume-control networks. The 26 V supply capability permits higher-voltage analog rails than a conventional 5 V implementation, although it does not guarantee full output swing at the rails. Use stable feedback values, maintain quiet supply decoupling, and route high-current audio outputs separately from sensitive input traces. Validate distortion and stability across the intended audio band before selecting the amplifier.
تجویز کردہ
Power Supply Control Loops
The LM2902NS-MAND can serve as an error amplifier or auxiliary control amplifier in non-isolated power-supply and feedback-control systems. Its 1 MHz bandwidth is appropriate for many slow voltage or current control loops, while four channels allow one controller to be combined with current sensing, soft-start assistance, and monitoring functions. A 26 V maximum supply rating supports higher-voltage control platforms. The amplifier does not replace a dedicated power-management controller, so compensation, output drive, and stability must be evaluated with the power stage. Keep the feedback node compact, use low-tolerance resistors where accuracy matters, and verify transient response using the complete power-stage model rather than the amplifier alone.
تجویز کردہ
Instrumentation Buffering
The LM2902NS-MAND is useful for buffering high-impedance instrumentation sources before they enter measurement or conversion circuitry. Four channels can support multiple sensor outputs, and the 1 MHz gain-bandwidth product is generally adequate for sensors and test signals with bandwidth below the amplifier’s closed-loop capability. In voltage-follower service, the high input impedance limits loading while the low output impedance helps drive the following stage. Avoid placing long unprotected input routes next to switching circuitry, and provide clean references and supply bypassing. Confirm the exact input-bias-current, offset-voltage, common-mode, and output-swing values in the datasheet when precision measurement performance is required.
تجویز کردہ
Data Acquisition Front Ends
The LM2902NS-MAND can implement four analog front-end channels for multiplexed sensors, resistance measurement, or low-speed data-acquisition systems. Each channel can amplify, invert, scale, or filter a sensor signal, while the 26 V-rated supply supports instrumentation that operates above conventional 5 V rails. The 1 MHz gain-bandwidth product handles many low-speed acquisition signals but does not replace a dedicated high-speed ADC driver. Maintain short feedback paths, use a quiet reference for dividers, and decouple the supply close to the package. Verify settling behavior, output drive, and noise performance against the acquisition system’s bandwidth and required measurement accuracy.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902NS-MAND — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM2902-N | LM2902B | LM324B | LM2902 |
|---|---|---|---|---|---|
| Package | 14-SO | 14-SO | 14-SO | 14-SO | 14-SO |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Amplifier Channels | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Maximum Supply Voltage | 26 V | 26 V | 36 V class | 36 V class | 26 V |
| Product Family | LM2902-N | LM2902-N | LM2902B upgraded family | LM324B upgraded family | LM2902 legacy family |
| Drop-In Relationship | Original device | Same 14-pin SO family | Drop-in replacement with upgraded functionality | Drop-in replacement for LM2902-family devices | Same LM2902 family |
اہم امتیازی خصوصیات
- Four independent general-purpose amplifier channels in one package (بمقابلہLM324B)
- A documented upgrade path for higher-voltage designs (بمقابلہLM2902B)
- Matches the legacy LM2902 family supply rating (بمقابلہLM2902)
- Single-package channel consolidation (بمقابلہLM2902-N)
ڈیزائن نوٹس
Decouple the LM2902NS-MAND supply pins close to the package and route the return current through a quiet ground plane. The four amplifier channels share package supply pins, so supply disturbance can affect every channel simultaneously. Review the manufacturer’s recommended capacitor values and voltage-derating requirements before fixing the placement because the exact capacitor recommendation for the MAND suffix must be taken from the complete ordering documentation.
Keep each op-amp input and feedback path short and separate from output, relay, motor, and switching-node traces. The LM2902-N has a 1 MHz gain-bandwidth product, so incorrect high-impedance feedback routing can introduce oscillation or unexpected bandwidth behavior. Use a solid ground reference, minimize loop area around the amplifier pins, and use a ground guard or shielding strategy if a high-impedance source is physically adjacent to noisy circuitry.
Do not assume that a 26 V maximum supply rating permits operation with the output or input at either rail. Check the LM2902NS-MAND common-mode input range, output-swing limits, supply-current behavior, and thermal conditions in the manufacturer datasheet. The family is a general-purpose amplifier rather than a guaranteed rail-to-rail part, so headroom errors can cause clipping, offset, distortion, or loss of regulation.
Estimated: amplifier dissipation depends on the actual supply voltage, quiescent current, load, output swing, and ambient temperature. Calculate Pdissipated from those operating values, compare the resulting junction temperature with the package and device limits, and provide copper area appropriate to the 14-pin SO footprint. This is an engineering estimate rather than a fixed datasheet power rating because the final calculation is specific to each design’s loading and supply conditions.
تعمیل کی معلومات
The LM2902NS-MAND is described as a RoHS-compliant four-channel operational amplifier. Confirm automotive qualification and other regional material declarations for the exact MAND suffix.