onsemi

LM2902VDTBG - Quad 3-26V Op Amp | onsemi | Industrial

MPN: LM2902VDTBG ✓ פעיל
3 V to 26 V Vdss 14-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

LM2902VDTBG סקירה

The onsemi LM2902VDTBG is a standard general-purpose quad operational amplifier packaged in a 14-pin TSSOP. It combines four amplifier channels with a 3 V to 26 V supply-voltage range, low-power operation, and extended-temperature capability, making it suitable for industrial control, instrumentation, sensor-conditioning, and general analog signal-processing systems. The device is offered in the PDSO14 package and is identified by DigiKey as a 4-circuit, 14-TSSOP amplifier.

An operational amplifier is an active analog component that uses high-gain differential feedback to amplify the voltage difference between its two inputs. The quad LM2902 configuration integrates four amplifiers into one package, reducing board area when a system requires several independent signal-conditioning channels. In the signal-chain hierarchy, the LM2902 belongs to the operational-amplifier family, which is part of analog signal-chain ICs and ultimately semiconductor devices used for measurement, control, conversion, and buffering.

The LM2902 series provides four general-purpose amplifier sections in one device. According to onsemi’s LM2902 documentation, the series supports operation from low-voltage single-supply systems to higher-voltage supplies. The Mouser listing identifies the LM2902VDTBG as a 3 V to 26 V, low-power, extended-temperature quad amplifier. A GlobalSpec result identifies the device as a bipolar quad operational amplifier with a maximum input offset voltage of 7000 uV, while the DigiKey listing characterizes it as a standard general-purpose amplifier.

Each amplifier section includes non-inverting and inverting inputs and an output, allowing the device to support voltage followers, noninverting amplifiers, inverting amplifiers, summing circuits, comparators, and differential signal conditioning. Because four amplifiers share one package, engineers can allocate them across related channels such as a sensor input, its reference, an output driver, and an auxiliary monitor. Exact input-offset, input-bias-current, gain-bandwidth, slew-rate, output-current, and noise figures should be selected from the operating conditions in the onsemi datasheet before committing a high-accuracy design.

Typical uses include industrial transducers, temperature and pressure sensor interfaces, low-level signal amplification, control-system signal conditioning, audio preamplification, and general-purpose buffering. Its quad organization is particularly useful when a board needs several similar analog channels without allocating separate packages for each amplifier. The 14-pin TSSOP footprint also supports compact surface-mount layouts, although pin pitch and exposed thermal behavior remain important layout considerations.

When designing around the LM2902VDTBG, begin with the four complete amplifier sections and confirm the required input common-mode range, output swing, supply current, noise, and stability behavior at the intended supply voltage. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should be routed away from switching nodes. Because the exact electrical limits are governed by the manufacturer datasheet, verify the operating temperature, package dimensions, pin orientation, and gain-bandwidth requirements against the final circuit and PCB constraints.

This product record organizes the manufacturer and distributor information for LM2902VDTBG with practical guidance for signal-chain design, source selection, and footprint verification. It also identifies the limits of the available replacement information so that engineers can distinguish confirmed package compatibility from merely similar amplifier families.

חלופות תחליף ישיר עבור LM2902VDTBG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM2902VDTBG (אותו גורם צורה וטביעת רגל) — שונים ב Number of Channels, Package, Power Class.

onsemi
Number of Channels: 4
Package: 14-TSSOP
Power Class: Low power
השווה עם LM2902VDTBG →

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

LM2902VDTBG דירוגים מרביים ומאפיינים חשמליים

Amplifier Count 4 amplifiers
Device Type Standard general-purpose operational amplifier
Supply Voltage Range 3 V to 26 V
Architecture Bipolar operational amplifier
Maximum Input Offset Voltage 7000 uV
טמפרטורת פעולה Extended temperature
Power Class Low-power operational amplifier
מארז 14-pin TSSOP
Package Designation PDSO14
סוג הרכבה Surface mount
Input Type Differential input
Number of Channels 4 channels

מדריך תצורת פינים של LM2902VDTBG pdso14

תצורת פינים עבור LM2902VDTBG (מארזת pdso14). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת pdso14 עבור LM2902VDTBG

אין נתוני פריסת פינים מפורטים עבור LM2902VDTBG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM2902VDTBG מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Temperature and Pressure Transducer Interface, Control-System Analog Front End, Low-Level Audio Preamplification, Data Acquisition and Instrumentation, Power-Supply Monitoring and Control.

🏭

Industrial Sensor Signal Conditioning

The LM2902VDTBG suits multichannel industrial sensor-conditioning designs because it combines four general-purpose amplifier sections with a 3 V to 26 V supply range and extended-temperature capability. Two channels can amplify and filter a differential sensor signal, while the remaining channels can buffer a reference or monitor another sensor. The integrated quad arrangement reduces package count and simplifies power routing, although the final design must confirm the input common-mode range, output swing, offset behavior, and bandwidth against the manufacturer electrical tables. The 14-pin TSSOP should be placed so that sensitive input nodes remain away from switching regulators and high-current return paths.

🌡️

Temperature and Pressure Transducer Interface

The LM2902VDTBG can form the analog front end for resistance-based temperature or pressure transducers. One amplifier channel can provide excitation buffering, another can amplify the resulting differential voltage, and the final channels can implement gain or reference stages. Its low-power quad architecture is useful when several related sensors share a board and require a common supply arrangement. The designer should verify that excitation amplitude and sensor output remain within the input common-mode range, and that offset and drift satisfy the measurement resolution. Decoupling capacitors should be placed near the supply pins with a short, low-impedance return path.

🔧

Control-System Analog Front End

In a control-system analog front end, the LM2902VDTBG can amplify error signals, buffer command voltages, and support auxiliary feedback channels without requiring four separate amplifier packages. Its 3 V to 26 V operating range is suitable for systems that operate from a single low-voltage rail as well as designs using a higher industrial supply. Practical implementation requires checking the output-drive limits at the chosen load and maintaining the required loop stability with the selected feedback network. Keep sensitive amplifier inputs away from relay coils, power switches, and high-current actuator wiring, and use a quiet ground reference where feedback accuracy is important.

🎧

Low-Level Audio Preamplification

The LM2902VDTBG can provide low-level audio preamplification when four similar gain stages, mixers, or buffers are needed. Its four amplifier sections allow a compact implementation of input amplification, active filtering, and output buffering in a 14-pin TSSOP. The device’s general-purpose architecture supports conventional inverting, noninverting, and summing configurations. Audio performance still depends on the selected gain-bandwidth and noise characteristics for the exact operating point, so the designer should avoid bandwidth or slew-rate limitations at the highest audio frequencies. Use short input traces, decouple the supply near the device, and maintain a low-impedance shared ground to minimize added noise.

📟

Data Acquisition and Instrumentation

The LM2902VDTBG is appropriate for general instrumentation where several low-level analog channels must be conditioned before sampling or measurement. Four channels can handle differential amplification, impedance buffering, active filtering, and reference conditioning in a compact footprint. The 3 V to 26 V supply range supports both portable low-voltage equipment and higher-voltage industrial instruments, while extended-temperature capability broadens its deployment range. Verify the offset voltage, bias current, gain-bandwidth product, and output behavior under the actual source impedance and temperature. Place the TSSOP close to the connector or source to minimize interference and keep the feedback network physically compact.

⚡

Power-Supply Monitoring and Control

The LM2902VDTBG can monitor a power rail and support threshold, amplification, or error-amplifier functions in a general-purpose control circuit. Its four channels can divide workload among sensing, filtering, feedback, and buffered outputs, while the 3 V to 26 V supply range accommodates a variety of industrial rail levels. The design must ensure that the monitored voltage and amplifier outputs remain within the applicable common-mode and output-swing limits. At higher supply voltages, thermal considerations become more important even though the device is described as low-power. Use short supply traces, local high-frequency bypass, and a defined high-current return path to prevent supply noise from disturbing the monitored signal.

What is the LM2902VDTBG?
The LM2902VDTBG is a onsemi quad, low-power, bipolar operational amplifier in a 14-pin TSSOP package. It contains four general-purpose amplifier channels and is listed for a 3 V to 26 V supply range with extended-temperature capability. According to the onsemi LM2902 datasheet, the family is intended for general analog signal processing when several independent amplifier sections are required on a compact PCB.
What is the supply voltage range of LM2902VDTBG?
The LM2902VDTBG operates from 3 V to 26 V according to the Mouser product listing for onsemi’s device. That range permits use in low-voltage single-supply systems as well as higher-voltage industrial analog circuits. The onsemi datasheet should be consulted for the complete electrical limits, including input common-mode range, output swing, supply-current behavior, and operating-temperature limits.
Where can I download the LM2902VDTBG datasheet?
The LM2902VDTBG datasheet can be accessed through the onsemi LM2902 document listed on Datasheets.com at https://www.datasheets.com/onsemi/lm2902vdtbg. It is also available from the archived PDF at https://pdf.digi-electronics.com/pdf/2225/LM2902VDTBG-datasheet.pdf. Use the manufacturer document as the controlling reference for pinout, recommended operating conditions, electrical characteristics, and package dimensions.
Where can I find the LM2902VDTBG pinout?
The LM2902VDTBG pinout is defined in the pin-connection section of the onsemi datasheet for the 14-pin PDSO14 package. The device contains four complete operational-amplifier sections, so its 14 pins are distributed across four three-pin amplifier channels plus supply connections. Use the package drawing and pin-description table together when assigning PCB nets and checking the counter-clockwise numbering of the TSSOP footprint.
How many operational amplifiers are in the LM2902VDTBG?
The LM2902VDTBG contains four operational-amplifier sections in one package. DigiKey identifies it as a “4 Circuit 14-TSSOP” amplifier, and the onsemi family documentation describes it as a single-supply quad operational-amplifier family. The four channels can perform independent voltage-amplification, buffering, summing, or control functions, subject to the common supply and grounding arrangement.
What is the maximum input offset voltage of LM2902VDTBG?
The maximum input offset voltage listed for LM2902VDTBG is 7000 uV, or 7 mV. GlobalSpec identifies the part as a four-function bipolar operational amplifier with that maximum offset specification. For precision applications, calculate the resulting output error using the closed-loop noise gain, and consult the onsemi datasheet for offset voltage at the actual common-mode voltage, supply level, and temperature.
Is LM2902VDTBG suitable for industrial sensor conditioning?
The LM2902VDTBG is suitable for many industrial sensor-conditioning circuits because it provides four amplifier channels, a 3 V to 26 V supply range, extended-temperature capability, and a surface-mount TSSOP package. It can amplify a low-level sensor output, buffer an excitation signal, or perform gain and subtraction stages. Confirm the input common-mode range, output swing, noise, and stability for the exact sensor excitation and supply conditions.
What can replace the LM2902VDTBG?
A valid replacement for LM2902VDTBG must use the same 14-pin TSSOP footprint and preserve pin-to-pin connectivity while meeting the circuit’s voltage, offset, bandwidth, and stability requirements. The retrieved cross-reference results identify LM2902DTBG, LM2902VDTBR2G, LM2902PWRG4, and NCV2902DTBR2G, but their package details do not establish a same-footprint match. Confirm the package drawing before treating any of them as a direct replacement.
LM2902VDTBG vs LM2902VDTBR2G: which is pin compatible?
LM2902VDTBG and LM2902VDTBR2G are related onsemi LM2902 options, but their orderable suffixes correspond to different package variants. The retrieved comparison results establish functional-series similarity, while the VDT and R2 order codes must be checked against their respective package drawings. Do not assume a footprint match solely because both parts are quad LM2902 amplifiers; verify the pin count, pitch, lead geometry, and land pattern first.
When should I choose LM2902VDTBG over LM324 options?
Choose LM2902VDTBG when the design specifically requires the extended-temperature, 3 V to 26 V onsemi LM2902 family and a 14-pin TSSOP footprint. An LM324-family device may be appropriate when its documented voltage range, offset, bandwidth, common-mode behavior, and package meet the application. The two families should not be treated as automatically interchangeable without checking every rail-to-rail input and output condition used by the circuit.
Is LM2902VDTBG the same as LM2902DTBG?
No. LM2902VDTBG and LM2902DTBG share the LM2902 family name, but their order codes identify different package variants and temperature grades. The VDT order code denotes the 14-pin TSSOP configuration associated with LM2902VDTBG, while the DT order code must be checked separately. Use the exact manufacturer package drawing to confirm whether a PCB change is required.
Where to buy LM2902VDTBG online?
Use the “Request a Quote” form on this page to request LM2902VDTBG pricing, stock confirmation, and lead time for the exact onsemi part number and 14-TSSOP package. The listing identifies LM2902VDTBG as a 4-circuit, 14-TSSOP standard amplifier. Buyers should include the target quantity, acceptable delivery date, and whether reel, tray, or another approved shipment format is required.
What is the price of LM2902VDTBG?
The current commercial price for LM2902VDTBG is obtained through the “Request a Quote” form on this page. Enter the required quantity and package or shipment preference so the quote can be matched to the exact LM2902VDTBG ordering code. The listing identifies the part as onsemi’s 4-circuit, 14-TSSOP amplifier, which helps prevent accidental quotation of a different package variant.
What is the lead time for LM2902VDTBG?
The current lead time for LM2902VDTBG should be confirmed through the “Request a Quote” form on this page by stating the quantity and required delivery date. Lead time can change with inventory position, production scheduling, package configuration, and shipment format. The exact onsemi MPN is LM2902VDTBG, corresponding to the 14-TSSOP standard general-purpose quad amplifier.
Is LM2902VDTBG in stock?
Current LM2902VDTBG inventory status should be confirmed through the “Request a Quote” form on this page. Include the required order quantity and any reel or tray packaging requirement so the response reflects the exact configuration. The part is identified as onsemi’s standard general-purpose, 4-circuit operational amplifier in a 14-pin TSSOP package.
What are the key specifications of LM2902VDTBG that engineers should know?
The key LM2902VDTBG specifications are four amplifier channels, a 3 V to 26 V supply range, low-power operation, extended-temperature capability, bipolar construction, a maximum input offset voltage of 7000 uV, and a 14-pin PDSO14 TSSOP package. According to the onsemi LM2902 datasheet and product listings, these characteristics make it suitable for multi-channel general-purpose analog signal conditioning.
What is the best onsemi equivalent for LM2902VDTBG?
The closest onsemi-family candidate is another specifically ordered 14-pin TSSOP LM2902 version, but the retrieved material does not provide enough package-level detail to name a guaranteed drop-in substitute. LM2902VDTBR2G, LM2902DTBG, and NCV2902DTBR2G appear in comparison or cross-reference material, yet their order codes require independent footprint verification. Compare the manufacturer pin drawings and electrical tables before approving a substitution.

נתוני עזר הנדסיים עבור LM2902VDTBG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LM2902VDTBG when a design needs four general-purpose amplifier channels, a 3 V to 26 V supply range, and a 14-pin TSSOP footprint in the onsemi LM2902 family. It is particularly suitable for industrial signal conditioning, instrumentation, control inputs, and compact multi-channel analog blocks. Choose a 14-pin TSSOP LM2902 order code only after confirming that its temperature grade, offset, bandwidth, and electrical ratings match the circuit. LM324-family parts may offer a different rail-to-rail input behavior, bandwidth, or package and therefore require direct comparison rather than an assumption of equivalence. Parts such as LM2902DTBG and LM2902VDTBR2G can represent related LM2902 devices, but their suffix-specific package drawings must establish whether the PCB footprint is identical.

השוואה עם חלופות

פרמטר מוצר זה
Brand onsemi
Package 14-pin TSSOP (PDSO14)
Amplifier Count 4 channels
Supply Voltage Range 3 V to 26 V
Architecture Bipolar
Maximum Input Offset Voltage 7000 uV
Power Class Low power
Temperature Capability Extended temperature
Functional Role Standard general-purpose operational amplifier

מבדילים עיקריים

  • Four amplifiers in one compact package (לעומתLM2902KPWR)
  • Single-supply operating capability (לעומתLM2902VDTBR2G)
  • Extended-temperature LM2902 configuration (לעומתLM324DTBG)

הערות תכנון

Place the input bypass capacitor and the device’s supply pins on the same side of the PCB with a short, low-impedance connection. Connect the decoupling return directly to the appropriate ground plane rather than routing it through the analog-signal ground. For the 14-pin TSSOP, verify the manufacturer land pattern and pin-1 orientation before fabrication because the exposed package geometry and lead pitch must match the selected footprint.

Route each non-inverting and inverting input as a compact differential pair, keep them away from switching nodes, and avoid sharing long traces with high-impedance sensor wiring. Place feedback components close to the associated amplifier pins to minimize parasitic capacitance. When the source impedance is high, verify bias-current error and noise against the onsemi electrical characteristics before choosing the smallest practical feedback resistor.

Do not equate the LM2902 family name with identical package compatibility. LM2902DTBG, LM2902VDTBR2G, LM2902PWRG4, and NCV2902DTBR2G appeared in comparison material, but each order code must be checked for package dimensions, pitch, pin arrangement, temperature grade, and electrical limits. A footprint match alone is insufficient if the replacement lacks the required input common-mode range, output swing, bandwidth, or stability at the circuit’s supply voltage.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the available product information. Confirm these attributes for the exact orderable part with onsemi or the authorized supply channel before regulatory approval.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LM2902VDTBG datasheet LM2902VDTBG pinout LM2902VDTBG datasheet pdf LM2902VDTBG TSSOP footprint onsemi LM2902VDTBG LM2902VDTBG equivalent LM2902VDTBG replacement LM2902VDTBG cross reference LM2902VDTBG vs LM2902DTBG LM2902VDTBG price LM2902VDTBG stock LM2902VDTBG 3V 26V amplifier LM2902VDTBG sensor conditioning LM2902VDTBG industrial application

רכיבים ומונחים קשורים

onsemi LM2902VDTBG LM2902DTBG LM2902VDTBR2G LM2902PWRG4 NCV2902DTBR2G LM2902KPWR LM324KAPWR LM324DTBG operational amplifier quad operational amplifier analog signal-chain IC semiconductor bipolar amplifier single-supply operation input offset voltage input common-mode range gain-bandwidth product slew rate 14-pin TSSOP PDSO14 TSSOP package family surface-mount package industrial signal conditioning
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר